6 Best Alternatives to the Vetroo Eclipse 90mm Low-Profile ARGB CPU Cooler (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding vetroo eclipse 90mm low profile argb CPU cooler alternatives helps you match your specific case dimensions and motherboard layout. The original Vetroo Eclipse focuses on space-constrained setups with its 72mm height and top-to-bottom airflow that cools your CPU and surrounding motherboard hardware. It also delivers addressable RGB lighting through a 5V 3-pin interface and dynamic PWM fan speeds between 800 and 2500 RPM. However, its mounting hardware works exclusively with Intel LGA 1700 and LGA 1851 sockets, which leaves AMD builders and older Intel systems unsupported.
You might also need a different form factor, such as a taller single-tower or dual-tower cooler with 120mm fans for higher thermal headroom. The 6 options in this guide share key specifications with the original cooler, including addressable RGB lighting, PWM control, or overlapping socket support. Reviewing their dimensions, socket lists, and fan configurations will help you choose the right replacement for your build in 2026.
Our top pick: Vetroo Eclipse 90mm Low-Profile ARGB Cooler.
How Each Alternative Compares
Cooler Master MasterAir MA410M ARGB CPU Cooler
The Cooler Master MasterAir MA410M changes the format from low-profile down-draft cooling to a full-size tower. Standing at 6.5 inches tall, it requires much more vertical clearance than the 72mm Vetroo Eclipse. In return, you get push-pull airflow and hardware thermal detection for visual temperature monitoring. However, you give up the compact 2.83-inch profile and downward motherboard airflow that fits inside small-form-factor enclosures. This cooler weighs 2.12 pounds and measures 5.15 inches wide by 4.4 inches long. You should choose this model if your chassis accommodates a 6.5-inch tower and you want dual-fan airflow with integrated thermal monitoring instead of an ultra-compact cooler.
Cooler Master MasterAir MA410M ARGB Air Cooler
This version of the Cooler Master MasterAir MA410M expands socket compatibility beyond the Vetroo Eclipse. While the Eclipse supports only Intel LGA 1700 and LGA 1851, this cooler supports AM4, LGA 1200, and LGA 1151 sockets. It features four direct-contact copper and aluminum heat pipes delivering 53.38 CFM of push-pull airflow. At 6.1 inches in height and weighing 2.5 pounds, it gives up the compact 72mm clearance and low weight of the Eclipse. It will not fit in slim cases. You should choose this cooler if you are building on AMD AM4 or older Intel sockets and your chassis has enough vertical space for a 6.1-inch tower.
PCCOOLER 8-Heatpipe Dual-Tower ARGB Cooler
The PCCOOLER RZ820 BK replaces the low-profile 72mm format with a heavy-duty dual-tower design. It provides eight heat pipes and a 300W thermal capacity, significantly exceeding the cooling capacity of the Vetroo Eclipse. Both units include addressable RGB lighting, but the PCCOOLER has a black dual-tower body measuring 6.5 inches high, 5.91 inches wide, and 6.34 inches long. You give up the space savings and top-to-bottom motherboard component cooling of the compact Eclipse. Choose this PCCOOLER model if you run a high-wattage processor inside a full-sized ATX case that can accommodate a 6.5-inch cooler instead of a small-form-factor chassis.
Cooler Master Hyper 212 Halo CPU Cooler
The Cooler Master Hyper 212 Halo adds AMD AM5 support alongside Intel LGA 1700 compatibility, whereas the Vetroo Eclipse restricts installation to Intel LGA 1700 and LGA 1851. It features a 120mm fan design, an aluminum heatsink, black styling, and ARGB lighting. Dimensions are 6.06 inches in length, 4.88 inches in width, and 2.87 inches in height, weighing 1.53 pounds. While the height is comparable to the 72mm (2.83-inch) Eclipse, its larger horizontal footprint requires more space around the motherboard. Pick the Hyper 212 Halo if you want 120mm tower-style airflow or AM5 socket support in a standard chassis.
Thermaltake UX200 ARGB Tower Cooler
The Thermaltake UX200 is a vertical tower cooler offering a 130W TDP rating and motherboard-synced 5V ARGB lighting. Unlike the Vetroo Eclipse, which works solely on Intel LGA 1700 and 1851 sockets, the UX200 supports AMD AM5 and Intel LGA 1200 motherboards. Standing 6 inches tall, 5 inches long, and 3 inches wide, it requires substantially more vertical chassis depth than the 72mm (2.83-inch) Eclipse. In exchange, you lose the compact down-draft motherboard cooling of the 90mm Vetroo fan. You should select the UX200 if you need 130W cooling for an AM5 or LGA 1200 processor inside a standard mid-tower case.
Iceberg Thermal IceSLEET G4 120mm Cooler
The Iceberg Thermal IceSLEET G4 upgrades fan size and thermal capacity over the Vetroo Eclipse. It uses a 120mm ARGB fan operating at 22.5 dBA to deliver 180W TDP cooling, whereas the Eclipse uses a 90mm fan reaching up to 2500 RPM. The IceSLEET G4 supports AMD AM5 alongside Intel LGA 1700, offering broader compatibility. Measuring 6.14 inches tall, 5.47 inches wide, and 3.19 inches long, it trades away the 72mm low-profile build of the Eclipse and cannot fit inside compact mini-ITX cases. Choose the IceSLEET G4 if you have room for a 6.14-inch tower and want quiet 180W cooling with AM5 or LGA 1700 support.
Quick picks
Our 7 picks
Vetroo Eclipse 90mm Low-Profile ARGB Cooler
Best for: compact Intel LGA 1700 and 1851 setups
- Socket Compatibility
- LGA 1851, LGA 1700
- Cooler Height
- 72mm
- Tower Design
- Low-Profile
- Fan Size
- 90mm
- Fan Speed
- 800-2500±10% RPM
- Lighting
- ARGB
The Vetroo Eclipse 90mm Low-Profile ARGB CPU Cooler is a compact down-draft cooler engineered for small-form-factor builds. At 72mm tall, it fits compact cases while directing airflow down onto your processor and surrounding motherboard hardware. Its 90mm PWM fan operates from 800 to 2,500 RPM for adjustable thermal control. You get addressable dual-ring RGB lighting via a standard 5V 3-pin motherboard header, designed strictly for Intel LGA 1700 and LGA 1851 sockets.
Pros
- Compact 72mm height fits small-form-factor enclosures
- Dynamic 4-pin PWM fan speed range of 800 to 2,500 RPM
- Top-to-bottom airflow directs air over CPU and motherboard components
- Dual-ring ARGB lighting syncs via 5V 3-pin interface
Cons
- Limited exclusively to Intel LGA 1851 and LGA 1700 sockets
- Lacks support for any AMD platforms
Good fit if
- You need a low-clearance cooler under 75mm for a compact chassis.
- You run an Intel processor on an LGA 1700 or LGA 1851 socket.
- You want addressable RGB lighting synchronized through a 5V 3-pin header.
Skip if
- You use an AMD processor or an older Intel socket.
- You have space for a taller 120mm tower cooler.
Verdict: Vetroo Eclipse 90mm Low-Profile ARGB CPU Cooler delivers compact 72mm down-draft cooling and dual-ring lighting for small-form-factor chassis. Its focused design limits hardware support exclusively to Intel LGA 1700 and LGA 1851 platforms.
Cooler Master MasterAir MA410M ARGB CPU Cooler
Best for: standard cases needing dual-fan thermal monitoring
- Heat Pipes
- 4
- Lighting
- ARGB
- Dimensions
- 4.4 × 5.15 × 6.5 inches
- Weight
- 2.12 pounds
View on Amazon: Cooler Master MasterAir MA410M ARGB CPU Cooler
The Cooler Master MasterAir MA410M is a tower air cooler featuring four 6mm copper heat pipes and a dual-fan push-pull setup. Standing 6.5 inches tall, it uses two MF120R ARGB fans generating up to 53.38 CFM of airflow at 6 to 31 dBA. It includes thermal detection lighting that shifts from blue to red under load, offering strong airflow if you have clearance for a standard tower.
Pros
- Dual 120mm fans in push-pull setup producing up to 53.38 CFM airflow
- Four 6mm copper heat pipes using Continuous Direct Contact 2.0
- Integrated thermal sensor shifts lighting from blue to red under load
- Includes dedicated wired ARGB controller and 28 LEDs
Cons
- Height of 6.5 inches will not fit low-profile or slim SFF cases
- Weight of 2.12 pounds puts more load on the motherboard than 90mm units
Good fit if
- You have a chassis with at least 6.5 inches of cooler clearance.
- You want real-time temperature tracking via lighting color changes.
- You need dual push-pull fans for an Intel LGA or AMD socket.
Skip if
- You require a low-profile cooler for a compact small-form-factor build.
- You want a lightweight heatsink under two pounds.
Verdict: Cooler Master MasterAir MA410M ARGB CPU Cooler provides push-pull airflow and hardware thermal detection for standard PC cases. It suits builders who have 6.5 inches of clearance and want visual temperature feedback.
Cooler Master MasterAir MA410M ARGB Air Cooler
Best for: AM4 builds requiring dual-fan tower airflow
- Socket Compatibility
- AM4, LGA1200, LGA1151
- Heat Pipes
- 4
- Lighting
- ARGB
- Material
- Copper, Aluminum
- Dimensions
- 6.5 × 9.1 × 6.1 inches
- Weight
- 2.5 pounds
View on Amazon: Cooler Master MasterAir MA410M ARGB Air Cooler
The Cooler Master MasterAir MA410M CPU Cooler is a dual-fan air cooler built with four direct-contact heat pipes and aluminum fins. You get push-pull MF120R fans producing up to 53.38 CFM of airflow at 31.0 decibels. It stands 6.1 inches tall and features 28 addressable RGB LEDs with a thermal detection sensor. This setup suits you if you run an AMD AM4 build and need more airflow than low-profile coolers provide.
Pros
- Push-pull dual MF120R fan configuration
- Four Continuous Direct Contact 2.0 heat pipes
- Thermal detection sensor reports temperature through lighting
- Airflow rated up to 53.38 CFM
Cons
- 6.1-inch height does not fit slim low-profile enclosures
- AMD AM5 socket support not listed
- Noise level reaches 31.0 decibels
Good fit if
- You run an AMD AM4 motherboard and want dual-fan airflow.
- You have a PC chassis with at least 6.1 inches of cooler clearance.
- You want hardware-level thermal monitoring displayed via ARGB lighting.
Skip if
- You need a low-profile sub-90mm cooler for small-form-factor cases.
- You build on the newer AMD AM5 platform.
Verdict: Cooler Master MasterAir MA410M CPU Cooler delivers 53.38 CFM of push-pull airflow across four direct-contact heat pipes for AM4 builds. Its 6.1-inch height provides standard tower cooling if your chassis has the clearance.
PCCOOLER 8-Heatpipe Dual-Tower ARGB Cooler
Best for: high-wattage builds in standard ATX cases
- Socket Compatibility
- LGA1851/1700/1200/115X/20XX, AM5/AM4
- Cooler Height
- 165mm
- Heat Pipes
- 8
- Tower Design
- Dual-Tower
- Fan Size
- 120mm, 140mm
- TDP Rating
- 300W
This dual-tower air cooler features eight heat pipes and a 300W TDP rating to handle heavy processor thermal loads. It pairs a 120mm front fan and a 140mm rear fan inside a 165mm-tall frame. You also get addressable RGB lighting synced through your motherboard. It suits you if you want high-capacity cooling for standard ATX enclosures instead of a compact low-profile setup.
Pros
- Rated for up to 300W TDP dissipation across eight heat pipes
- Sliding front fan rail allows 42mm to 62mm RAM height clearance
- Includes pre-applied thermal paste and steel mounting screwdriver
- Dual PWM fans deliver up to 86.7 CFM and 71.9 CFM airflow
Cons
- 165mm height exceeds standard clearance limits for compact SFF cases
- Front fan uses a non-standard 120x150mm dimension
- May block the first PCIe slot on narrow mATX motherboards
Good fit if
- You have an ATX case with at least 167mm of CPU cooler clearance.
- You run high-wattage desktop processors requiring up to 300W thermal headroom.
- You want a dual-fan heatsink with addressable RGB lighting.
Skip if
- You need a low-profile cooler for a small-form-factor or 4U server chassis.
- You have a compact mATX motherboard with less than 25mm of space to the first PCIe slot.
Verdict: PCCOOLER Dual-Tower 8-Heatpipe ARGB CPU Cooler delivers high-end 300W thermal performance for full-sized cases with its dual-fan, eight-heatpipe design. It provides substantial cooling capacity whenever space allows.
Cooler Master Hyper 212 Halo CPU Cooler
Best for: standard cases needing balanced 120mm tower airflow
- Cooler Height
- 154mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 2050 RPM
- Lighting
- ARGB
- Socket Compatibility
- AM5, LGA 1700
The Cooler Master Hyper 212 Halo is a single-tower air cooler featuring four direct-contact copper heat pipes and a 120mm ARGB Gen 2 fan. Operating at up to 2050 RPM, it pushes 51.88 CFM of airflow at 27 dBA. At 154mm tall, it trades low-profile clearance for higher air volume, making it a reliable option if your PC case accommodates standard vertical heatsinks.
Pros
- 120mm fan delivers 51.88 CFM airflow at 27 dBA maximum noise
- Four direct-contact 6mm copper heat pipes
- Addressable RGB Gen 2 lighting with auto-detection
- Broad socket support across AM5, AM4, and LGA 1700
Cons
- 154mm height is too tall for slim mini-ITX cases
- Includes only a single 120mm fan
Good fit if
- You have at least 154mm of cooler clearance inside your case.
- You want 120mm fan airflow rather than a compact 90mm design.
Skip if
- You require a low-profile cooler for a small-form-factor chassis.
- You prefer an out-of-the-box dual-fan configuration.
Verdict: Cooler Master Hyper 212 Halo 120mm ARGB Cooler provides dependable single-tower cooling with addressable lighting for standard cases. It offers stronger airflow than compact 90mm units when vertical clearance is not an issue.
Thermaltake UX200 ARGB Tower Cooler
Best for: standard cases needing 130W TDP ARGB cooling
- Socket Compatibility
- Intel, AM5, AMD, LGA 1200
- Heat Pipes
- 4
- TDP Rating
- 130W
- Lighting
- ARGB
- Dimensions
- 5 × 3 × 6 inches
- Weight
- 2.19 ounces
The Thermaltake UX200 ARGB CPU Cooler is a tower-style heatsink built for standard desktop builds. It features four 6mm direct-contact copper heat pipes and handles processors with thermal ratings up to 130W TDP. A nine-blade fan with a hydraulic bearing pushes air across the aluminum fins, while 15 addressable LEDs deliver 5V motherboard lighting sync. You will appreciate this cooler if you want straightforward illumination and moderate heat dissipation in an AM5 or LGA 1200 chassis.
Pros
- Four 6mm direct-contact copper heat pipes
- Rated for processors up to 130W TDP
- 15 addressable LEDs compatible with 5V motherboard sync
- Nine-blade fan with a self-lubricating hydraulic bearing
Cons
- Stands 6 inches tall, requiring significantly more clearance than low-profile designs
- TDP capacity tops out at 130W, limiting headroom for high-draw CPUs
Good fit if
- You have a PC case with at least 6 inches of vertical cooler clearance.
- You use an AMD AM5 or Intel LGA 1200 CPU drawing 130W TDP or less.
- You want 5V ARGB motherboard lighting synchronization.
Skip if
- You need a compact low-profile cooler for a slim small-form-factor case.
- You run a high-wattage processor requiring more than 130W TDP cooling capacity.
Verdict: Thermaltake UX200 ARGB CPU Cooler delivers reliable 130W TDP cooling and 5V motherboard-synced lighting for mid-range builds. Its 6-inch height requires a standard desktop case rather than a compact enclosure.
Iceberg Thermal IceSLEET G4 120mm Cooler
Best for: standard towers needing quiet 120mm ARGB cooling
- Socket Compatibility
- LGA1700, 1200, 115X, 1366, AM5, AM4
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 180W
- Fan Speed
- 1400 RPM
- Lighting
- ARGB
This tower cooler trades the compact low-profile footprint of 90mm designs for a full-size 120mm ARGB PWM fan and four direct-touch heat pipes. It handles processors up to 180W TDP while maintaining a 22.5 dBA noise profile and 58.5 CFM airflow. If you have 6.14 inches of vertical clearance inside your case and want higher thermal headroom with lower operating noise, this unit fits your standard desktop chassis.
Pros
- Rated for up to 180W TDP heat dissipation
- 120mm ARGB PWM fan with auto start-stop function
- Slide-lock mounting system replaces traditional fan clips
- Low maximum noise profile rated at 22.5 dBA
Cons
- Height of 6.14 inches will not fit compact low-profile cases
- Maximum fan speed is limited to 1400 RPM
Good fit if
- You have at least 6.14 inches of vertical clearance in your computer case.
- You want up to 180W TDP cooling capacity with an ARGB 120mm fan.
- You prefer clip-free fan installation using a slide-lock mechanism.
Skip if
- You are assembling a slim or small-form-factor build that requires a true low-profile cooler.
- You need fan speeds higher than 1400 RPM for maximum airflow.
Verdict: Iceberg Thermal IceSLEET G4 120mm ARGB Cooler delivers 180W TDP cooling capacity and quiet 22.5 dBA operation for cases with sufficient vertical clearance. It provides a larger, quieter 120mm fan alternative to compact 90mm units.
Specifications side by side
| Spec | Vetroo Eclipse 90mm Low-Profile ARGB Cooler | Cooler Master MasterAir MA410M ARGB CPU Cooler | Cooler Master MasterAir MA410M ARGB Air Cooler | PCCOOLER 8-Heatpipe Dual-Tower ARGB Cooler | Cooler Master Hyper 212 Halo CPU Cooler | Thermaltake UX200 ARGB Tower Cooler | Iceberg Thermal IceSLEET G4 120mm Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 1851, LGA 1700 | not specified | AM4, LGA1200, LGA1151 | LGA1851/1700/1200/115X/20XX, AM5/AM4 | not specified | Intel, AM5, AMD, LGA 1200 | LGA1700, 1200, 115X, 1366, AM5, AM4 |
| Cooler Height | 72mm | not specified | not specified | 165mm | 154mm | not specified | not specified |
| Heat Pipes | not specified | 4 | 4 | 8 | 4 | 4 | 4 |
| Tower Design | Low-Profile | not specified | not specified | Dual-Tower | not specified | not specified | not specified |
| Fan Size | 90mm | not specified | not specified | 120mm, 140mm | 120mm | not specified | 120mm |
| TDP Rating | not specified | not specified | not specified | 300W | not specified | 130W | 180W |
| Fan Speed | 800-2500±10% RPM | not specified | not specified | 2200 RPM | 2050 RPM | not specified | 1400 RPM |
| Lighting | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Color | not specified | MasterAir MA410M | MA410M ARGB | Black | Black | RGB Tower | Black |
| Material | not specified | not specified | Copper, Aluminum | not specified | Aluminum | not specified | not specified |
| Features | not specified | not specified | not specified | not specified | Fan | not specified | Fan |
| Dimensions | 3.94 × 3.94 × 2.83 inches | 4.4 × 5.15 × 6.5 inches | 6.5 × 9.1 × 6.1 inches | 6.34 × 5.91 × 6.5 inches | 6.06 × 4.88 × 2.87 inches | 5 × 3 × 6 inches | 3.19 × 5.47 × 6.14 inches |
| Weight | not specified | 2.12 pounds | 2.5 pounds | not specified | 1.53 pounds | 2.19 ounces | not specified |
| Model | NL-CPU-ECLIPSE | MAM-T4PN-218PC-R1 | MAM-T4PN-218PC-R1 | RZ820 BK | RR-S4KK-20PA-R1 | CL-P065-AL12SW-A | ICESLEETG4MD-BBB-00A |
| Size | not specified | not specified | 4 HeatPipes | not specified | V2 | AMD/Intel | not specified |
Frequently asked questions
Which alternative should you choose for an AMD AM5 build?
You should select the Cooler Master Hyper 212 Halo, Thermaltake UX200, or Iceberg Thermal IceSLEET G4. The original Vetroo Eclipse only fits Intel LGA 1700 and LGA 1851 sockets. If you build on AM5, the Iceberg Thermal IceSLEET G4 supports up to 180W TDP with a 120mm fan, while the Thermaltake UX200 handles up to 130W TDP. Check your case depth before installing these taller tower designs.
What is the highest wattage cooler among these alternatives?
The PCCOOLER Dual-Tower 8-Heatpipe ARGB Cooler handles the highest thermal load at 300W TDP. It features a dual-tower structure, eight heat pipes, and two fans. This model measures 6.5 inches high, 5.91 inches wide, and 6.34 inches long. You need a standard ATX enclosure to house this unit, unlike the compact 2.83-inch height of the Vetroo Eclipse.
Can you fit the Cooler Master Hyper 212 Halo in a low-profile case?
You cannot fit the Cooler Master Hyper 212 Halo in most low-profile cases. Although its height is listed at 2.87 inches, its length is 6.06 inches and width is 4.88 inches. Standard desktop towers accommodate its single-tower 120mm fan orientation better. For extremely compact enclosures, the Vetroo Eclipse remains the shorter profile option with a 2.83-inch height and a 3.94-inch footprint.
Which cooler offers the quietest operation on this list?
The Iceberg Thermal IceSLEET G4 provides the quietest documented noise output at 22.5 dBA. It pairs this quiet operation with a 120mm fan and handles up to 180W TDP. Standing 6.14 inches tall, it requires considerably more vertical clearance than low-profile down-draft coolers. You should choose it when you want low acoustic levels in a chassis that supports 120mm tower coolers.
Which alternative works with older Intel LGA 1200 or 1151 motherboards?
You should look at the Cooler Master MasterAir MA410M or Thermaltake UX200 for LGA 1200 boards. The MA410M model also supports LGA 1151 alongside AM4. It features four direct-contact heat pipes made of copper and aluminum, pushing 53.38 CFM of airflow. The Vetroo Eclipse does not support these older Intel platforms, focusing only on newer LGA 1700 and LGA 1851 sockets.
How do ARGB lighting connections differ between these alternatives?
Most of these coolers feature addressable RGB lighting that connects to your motherboard headers. The Thermaltake UX200 uses a 5V motherboard-synced lighting header to manage its illumination effects. Other units like the PCCOOLER RZ820 and Iceberg Thermal IceSLEET G4 also integrate ARGB LEDs across their fan assemblies. You must ensure your motherboard possesses a compatible 3-pin ARGB header before purchasing any of these options.