Looking Beyond the Cooler Master i70C ARGB Low Profile? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Cooler Master i70C ARGB provides compact cooling with a 70mm height, a copper insert base, and a 95W TDP rating for Intel LGA 1700 and LGA 1851 sockets. If you are researching cooler master i70c argb low profile alternatives, you might need different specifications for your specific system. The original cooler handles low-profile layouts well and pairs an anodized aluminum fin array with a 120mm PWM fan operating from 650 to 1,800 RPM.
You might look for an alternative if you require support for AMD AM4 or AM5 motherboards, as the i70C only mounts to LGA 1700 and LGA 1851. You may also need a higher thermal capacity, such as a 130W or 200W TDP rating, or four direct-contact copper heat pipes. Other builds can fit a compact tower up to 6.1 inches tall rather than a flat top-flow design. The 6 alternatives on this list were selected because their core specifications overlap with the original, offering ARGB lighting, 120mm or 130mm fan sizes, and compatible mounting hardware for space-limited enclosures.
Our top pick: Cooler Master i70C ARGB Low-Profile Cooler.
Comparing Cooler Master i70C Alternatives
Thermaltake 130mm ARGB Low-Profile Cooler
The Thermaltake 130mm ARGB Low-Profile Cooler increases cooling capacity to a 130W TDP rating, compared to the 95W ceiling on the Cooler Master i70C. It features a larger 130mm PWM fan and a 72mm total height, which is slightly taller than the 70mm i70C. Its wider 5.12-inch square footprint requires more horizontal room around your socket, though it is designed for zero RAM interference. For socket compatibility, it adds older Intel mounts for LGA 1200, LGA 1151, and LGA 1150 alongside LGA 1851, but it lacks LGA 1700 support. You should choose it if you run a higher-wattage processor on LGA 1851 or older Intel motherboards.
Jonsbo 92mm ARGB Mini Tower Cooler
The Jonsbo 92mm ARGB Mini Tower Cooler shifts from a flat top-flow design to a mini-tower format. It stands 5.1 inches tall, making it significantly taller than the 70mm Cooler Master i70C. However, its base footprint measures just 2.75 inches wide by 3.6 inches long, occupying less horizontal motherboard area than the 4.72-inch square i70C. Cooling hardware includes four copper heat pipes rather than a copper insert. It uses a smaller 92mm fan instead of a 120mm unit. It also expands socket support to include AMD AM4 and AM5 alongside Intel LGA 1700 and LGA 1851. Pick it if your case permits 130mm vertical height and you need AMD compatibility.
Level Play 120mm 4-Heatpipe ARGB Cooler
The Level Play 120mm ARGB Cooler provides a much higher 200W TDP rating than the 95W capacity of the Cooler Master i70C. It uses four direct-contact copper heat pipes to move thermal energy away from your processor. Unlike the Intel-only i70C, it supports AMD AM4 and AM5 sockets in addition to Intel LGA 1700 and LGA 1851. It weighs 1.54 pounds, making it heavier than the 14.5-ounce i70C. Its 6-inch by 5-inch dimensions also demand more space inside your chassis. You should pick this cooler if you run a hotter processor up to 200W and your enclosure can accommodate standard tower dimensions rather than a strict 70mm low-profile unit.
upHere 120mm ARGB CPU Air Cooler
The upHere 120mm ARGB CPU Air Cooler replaces the compact top-flow form factor with a 6.1-inch tall tower structure. This added height means you give up the 70mm low-profile clearance of the Cooler Master i70C, requiring a standard desktop enclosure. In return, you gain four heat pipes and broader platform support. While the i70C is restricted to Intel LGA 1700 and LGA 1851, the upHere cooler installs on AMD AM4, AMD AM5, LGA 1700, and LGA 1851 motherboards. Both options use a 120mm ARGB fan for active airflow. Choose this cooler if your computer case has room for a 6.1-inch tower and you want multi-socket compatibility.
Thermaltake 130mm Low Profile CPU Cooler
The Thermaltake 130mm Low Profile CPU Cooler is rated for 130W TDP chips, giving it more thermal headroom than the 95W Cooler Master i70C. It utilizes a top-flow design with a 130mm fan and copper base. At 75.6mm tall and 5.24 inches square, it is slightly taller and wider than the 70mm, 4.72-inch square i70C. Socket mounting also differs significantly: this model supports Intel LGA 1851, LGA 1200, LGA 1151, and LGA 1150, but does not fit LGA 1700. You should select this alternative if you need 130W heat management and zero RAM interference on LGA 1851 or older LGA 115x and LGA 1200 builds.
Cooler Master Hyper 212 Halo CPU Cooler
The Cooler Master Hyper 212 Halo is a traditional tower cooler rather than a low-profile heatsink. It requires 154mm of vertical clearance, so you give up the 70mm height advantage of the i70C. It is also heavier at 1.53 pounds compared to the 14.5-ounce i70C. In exchange, the Hyper 212 Halo provides four direct-contact heat pipes through an aluminum fin array. For socket coverage, it supports AMD AM5 and Intel LGA 1700, dropping the LGA 1851 mounting included on the i70C. You should pick this model if you are building inside a mid-tower case with standard vertical clearance and need AM5 or LGA 1700 support.
Quick picks
Our 7 picks
Cooler Master i70C ARGB Low-Profile Cooler
Best for: low-profile Intel LGA 1700 and 1851 builds
- Socket Compatibility
- LGA 1700, LGA 1851
- Cooler Height
- 70mm
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- TDP Rating
- 95W
- Fan Speed
- 1,800 RPM
The Cooler Master i70C ARGB Low Profile CPU Cooler is a compact downward-blowing heatsink designed specifically for Intel LGA 1700 and LGA 1851 sockets. At 70mm tall, it fits compact cases easily. It features a copper insert base surrounded by black aluminum fins and is cooled by a 120mm PWM fan that runs between 650 and 1,800 RPM. It suits you if you run a 95W TDP or lower Intel processor.
Pros
- Compact 70mm total height for small-form-factor clearance
- Copper insert base paired with black aluminum fins
- 120mm PWM fan operating from 650 to 1,800 RPM
- Addressable RGB illumination with frosted fan blades
Cons
- Limited to Intel LGA 1700 and LGA 1851 sockets without AMD support
- Cooling capacity capped at a 95W TDP rating
Good fit if
- You need a cooler under 75mm tall for a small chassis.
- You use an Intel LGA 1700 or LGA 1851 CPU rated at 95W TDP or less.
- You want standard 120mm PWM fan airflow with integrated ARGB lighting.
Skip if
- You run an AMD processor or an older Intel socket platform.
- You use an unlocked or high-wattage CPU requiring more than 95W TDP cooling.
Verdict: Cooler Master i70C ARGB Low Profile CPU Cooler delivers reliable cooling for sub-95W Intel chips in tight spaces with its 70mm profile and 120mm PWM fan. It serves as a targeted, space-saving choice specifically built for LGA 1700 and LGA 1851 setups.
Thermaltake 130mm ARGB Low-Profile Cooler
Best for: compact Intel builds needing clear memory space
- Socket Compatibility
- LGA 1851/1700/1200/1156/1155/1151/1150
- Cooler Height
- 72mm
- Fan Size
- 130mm
- TDP Rating
- 130W
- Fan Speed
- 2400 RPM
- Lighting
- ARGB
This Thermaltake top-flow air cooler stands 72mm tall and pairs a copper base with aluminum fins for CPUs up to 130W TDP. It features a 130mm PWM ARGB fan that spins up to 2400 RPM, complete with an infinity-mirror center hub. A non-interference layout keeps your memory clearance open. It suits you if you need a compact Intel-focused cooler for small form factor cases.
Pros
- Low 72mm total height fits small form factor enclosures
- 130mm PWM fan delivers speeds from 500 to 2400 RPM
- Non-interference design prevents overlap with memory slots
- Constructed with a copper base and aluminum fins
Cons
- Supports Intel sockets only, with no AMD mounting included
- 130W TDP ceiling limits use on higher-wattage processors
Good fit if
- You build in a small form factor case with 72mm of clearance.
- You run an Intel processor on sockets such as LGA 1700 or LGA 1851.
- You require zero obstruction over your motherboard memory slots.
Skip if
- You are using an AMD motherboard platform.
- You require thermal capacity exceeding a 130W TDP rating.
Verdict: Thermaltake 130mm Low-Profile ARGB Cooler delivers compact 72mm cooling with zero RAM interference for Intel systems under 130W TDP. Its 130mm PWM fan and copper base provide solid airflow in tight chassis spaces.
Jonsbo 92mm ARGB Mini Tower Cooler
Best for: Compact builds needing memory clearance and ARGB
- Socket Compatibility
- LGA1851/1700/1200/115X, AM4/AM5
- Cooler Height
- 130mm
- Heat Pipes
- 4
- Tower Design
- Tower
- Fan Size
- 92mm
- Lighting
- ARGB
If you need an alternative to stock-style downward coolers, this compact tower gives you four nickel-plated copper heat pipes and a 130mm overall height. You get a 92mm ARGB PWM fan with silicone pads to dampen vibration. An offset pipe design preserves clearance for tall memory modules. It fits modern Intel sockets including LGA 1700 and 1851, alongside AMD AM4 and AM5 platforms in space-limited PC cases.
Pros
- Four nickel-plated copper heat pipes
- Compact 130mm tower height fits smaller chassis
- Crooked neck heat pipe layout clears memory slots
- 92mm PWM ARGB fan with eight shock-absorbing silicone pads
Cons
- Uses a 92mm fan instead of standard 120mm sizing
- Height of 130mm exceeds true low-profile horizontal coolers
Good fit if
- You need a 130mm mini-tower that avoids blocking memory slots.
- You want ARGB lighting across the fan and integrated top cover.
- You use modern AMD AM4/AM5 or Intel LGA 1700/1851 platforms.
Skip if
- You have an ultra-slim case unable to clear 130mm vertical height.
- You require a full-sized 120mm fan for cooling.
Verdict: Jonsbo 92mm Mini ARGB Tower Cooler provides four heat pipes and offset memory clearance within a compact 130mm footprint. It delivers a space-conscious tower alternative if your case can accommodate more vertical height than a flat cooler.
Level Play 120mm 4-Heatpipe ARGB Cooler
Best for: higher-TDP processors in standard mid-tower cases
- Socket Compatibility
- AM4, AM5, LGA 1700, LGA 1851
- Cooler Height
- 152mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 200W
- Fan Speed
- 1800 RPM ± 10%
This Level Play unit is a tower-style CPU cooler equipped with four direct-contact copper heat pipes and a 120mm PWM fan. It is rated for thermal loads up to 200W TDP while maintaining noise levels between 0 and 26 dBA. With a standing height of 152mm, you get full tower thermal headroom if your chassis accommodates standard coolers instead of strict low-profile units.
Pros
- Rated for thermal loads up to 200W TDP
- Four direct-contact copper heat pipes for heat transfer
- PWM fan operates between 0 and 26 dBA
- Supports Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- Height of 152mm prevents installation in compact low-profile cases
- Push-pull brackets are included but second fan is sold separately
- Lighting requires a 3-pin ARGB motherboard header
Good fit if
- You have a PC case with at least 152mm of vertical cooler clearance.
- You need to cool a processor with a power draw up to 200W TDP.
- You want quiet fan operation with sound levels under 26 dBA.
Skip if
- You need a low-profile cooler for a slim form-factor case.
- You do not have a 3-pin ARGB motherboard header for the lighting.
Verdict: Level Play Combat 120mm ARGB Cooler delivers a 200W TDP rating and direct-contact copper pipes for systems with standard tower clearance.
upHere 120mm ARGB CPU Air Cooler
Best for: standard cases needing 120mm ARGB tower cooling
- Socket Compatibility
- AM5/AM4, LGA 1851/1700/1200/1155/1156
- Cooler Height
- 6.1 inches
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 1650rpm ±10%
- Lighting
- ARGB
This upHere unit is a tower air cooler equipped with a 120mm ARGB fan and four 6mm direct-contact heat pipes. It delivers up to 68.2 CFM of airflow at 1650 RPM while maintaining noise levels below 26 dB(A). At 6.1 inches tall, it steps beyond compact footprints. You will find it practical if your case accommodates standard tower heights.
Pros
- 120mm ARGB fan delivering up to 68.2 CFM of airflow
- Four 6mm direct-contact heat pipes with a 25mm contact base
- Operates below 26 dB(A) at maximum 1650 RPM
- Wide socket support including Intel LGA 1851, 1700, and AMD AM5
Cons
- Height of 6.1 inches excludes slim and compact mini-ITX cases
- Tower layout requires standard vertical clearance rather than low-profile spacing
Good fit if
- You have a standard PC case with at least 6.1 inches of cooler clearance.
- You want a 120mm ARGB fan setup that clears your RAM modules.
- You need mounting support for modern platforms like LGA 1851 or AM5.
Skip if
- You are assembling a low-profile or small-form-factor build.
- You need a horizontal, downdraft air cooler to fit tight chassis constraints.
Verdict: upHere 120mm ARGB 4-Heatpipe CPU Cooler provides high airflow and broad socket compatibility for builders with cases tall enough for a 6.1-inch tower.
Thermaltake 130mm Low Profile CPU Cooler
Best for: compact Intel builds needing zero RAM interference
- Socket Compatibility
- LGA 1851/1700/1200/1156/1155/1151/1150
- Cooler Height
- 75.6mm
- Fan Size
- 130mm
- TDP Rating
- 130W
- Fan Speed
- 500~2400 RPM
- Lighting
- ARGB
This top-flow air cooler stands 75.6mm tall and pairs a copper base with aluminum fins. It features a 130mm PWM fan that runs between 500 and 2400 RPM, delivering up to a 130W TDP rating. It includes ARGB lighting with an infinity mirror center hub. The non-interference layout leaves clearance for your RAM. It suits you if you need a low-profile Intel cooler for small form factor cases.
Pros
- 75.6mm total height fits compact and SFF enclosures
- 130mm PWM fan operating from 500 to 2400 RPM
- Non-interference layout prevents memory module overlap
- Copper base paired with aluminum cooling fins
Cons
- Limited to Intel sockets with no AMD mounting included
- 130W TDP rating limits headroom for higher-draw processors
Good fit if
- You build in a compact case requiring under 76mm of cooler clearance
- You run a compatible Intel processor rated up to 130W TDP
- You want top-flow ARGB lighting with clear RAM slot access
Skip if
- You use an AMD processor
- You require cooling capacity beyond 130W TDP
Verdict: Thermaltake 130mm Low Profile ARGB Cooler delivers 130W TDP cooling in a 75.6mm top-flow package built for Intel sockets. It provides dependable clearance for memory modules in space-constrained builds.
Cooler Master Hyper 212 Halo CPU Cooler
Best for: standard mid-tower cases needing ARGB cooling
- Cooler Height
- 154mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 2050 RPM
- Lighting
- ARGB
- Socket Compatibility
- AM5, LGA 1700
The Cooler Master Hyper 212 Halo is a single-tower air cooler featuring four 6mm direct-contact copper heat pipes and an aluminum fin stack. It uses a 120mm ARGB Gen 2 fan that reaches 2050 RPM, delivering up to 51.88 CFM of airflow at 27 dBA. At 154mm tall, it fits standard mid-tower enclosures rather than low-profile cases, making it a capable step up if you have extra vertical case clearance.
Pros
- Four 6mm direct-contact copper heat pipes
- 120mm ARGB Gen 2 fan delivers up to 51.88 CFM of airflow
- Rated sound level of 27 dBA at 2050 RPM
- Supports Intel LGA 1700, 1200, 115x and AMD AM5, AM4 sockets
Cons
- 154mm height will not fit compact low-profile chassis
- Requires a 3-pin motherboard header for ARGB lighting features
Good fit if
- You have a PC chassis with at least 154mm of cooler clearance.
- You want four direct-contact heat pipes and a 120mm ARGB fan.
- You use a modern Intel LGA 1700/1200 or AMD AM4/AM5 platform.
Skip if
- You need a compact low-profile cooler for a slim build.
- You lack a 3-pin ARGB motherboard header for the lighting.
Verdict: Cooler Master Hyper 212 Halo CPU Cooler trades low-profile compact dimensions for four direct-contact heat pipes and a 120mm ARGB fan. It delivers solid airflow and broad socket support for builders with at least 154mm of vertical clearance.
Specifications side by side
| Spec | Cooler Master i70C ARGB Low-Profile Cooler | Thermaltake 130mm ARGB Low-Profile Cooler | Jonsbo 92mm ARGB Mini Tower Cooler | Level Play 120mm 4-Heatpipe ARGB Cooler | upHere 120mm ARGB CPU Air Cooler | Thermaltake 130mm Low Profile CPU Cooler | Cooler Master Hyper 212 Halo CPU Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 1700, LGA 1851 | LGA 1851/1700/1200/1156/1155/1151/1150 | LGA1851/1700/1200/115X, AM4/AM5 | AM4, AM5, LGA 1700, LGA 1851 | AM5/AM4, LGA 1851/1700/1200/1155/1156 | LGA 1851/1700/1200/1156/1155/1151/1150 | not specified |
| Cooler Height | 70mm | 72mm | 130mm | 152mm | 6.1 inches | 75.6mm | 154mm |
| Heat Pipes | not specified | not specified | 4 | 4 | 4 | not specified | 4 |
| Tower Design | Low-Profile | not specified | Tower | not specified | not specified | not specified | not specified |
| Fan Size | 120mm | 130mm | 92mm | 120mm | 120mm | 130mm | 120mm |
| TDP Rating | 95W | 130W | not specified | 200W | not specified | 130W | not specified |
| Fan Speed | 1,800 RPM | 2400 RPM | not specified | 1800 RPM ± 10% | 1650rpm ±10% | 500~2400 RPM | 2050 RPM |
| Lighting | ARGB | ARGB | ARGB | ARGB Gen 2 | ARGB | ARGB | ARGB |
| Color | Black | Black | Black | Black | Black | Black | Black |
| Material | Copper, Aluminum | Copper, Aluminum | Copper | not specified | not specified | Copper, Aluminum | Aluminum |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 4.72 × 4.72 × 2.76 inches | 5.12 × 5.12 × 2.83 inches | 3.6 × 2.75 × 5.1 inches | 6 × 5 × 2.8 inches | 5.12 × 2.87 × 6.1 inches | 5.24 × 5.24 × 2.98 inches | 6.06 × 4.88 × 2.87 inches |
| Weight | 14.5 ounces | not specified | not specified | 1.54 pounds | not specified | not specified | 1.53 pounds |
| Size | 3.40 | not specified | not specified | not specified | not specified | not specified | V2 |
| Model | RR-I7C7-18PA-R1 | UX150 ARGB | EVO 1400 ARGB | Combat AIR CA4 | not specified | UX150-L ARGB | RR-S4KK-20PA-R1 |
If you want liquid cooling for higher thermal loads, you can evaluate cooler master coolermaster masterliquid ml240l RGB alternatives.
Frequently asked questions
Which Cooler Master i70C alternatives support AMD AM4 or AM5 sockets?
You can choose the Jonsbo EVO 1400, Level Play Combat AIR CA4, upHere 120mm, or Cooler Master Hyper 212 Halo for AMD compatibility. The Cooler Master i70C only supports Intel LGA 1700 and LGA 1851 sockets. Models like the Jonsbo and upHere coolers feature mounting for AM4, AM5, and Intel platforms, giving you flexibility if you build with an AMD processor.
What is the highest TDP rating among these alternative coolers?
The Level Play Combat AIR CA4 delivers the highest thermal capacity among these alternatives with a 200W TDP rating. It utilizes four direct-contact copper heat pipes to handle processors that produce significantly more heat than the 95W ceiling on the Cooler Master i70C. This cooler mounts to AMD AM4, AM5, Intel LGA 1700, and LGA 1851 sockets in mid-tower cases.
Can you find a low-profile alternative that fits older Intel sockets?
Yes, both the Thermaltake UX150 and UX150-L low-profile coolers support older Intel motherboards, including LGA 1200, LGA 1151, and LGA 1150 sockets. The Cooler Master i70C only supports LGA 1700 and LGA 1851. These Thermaltake alternatives also feature 130W TDP ratings, top-flow designs, and copper-aluminum heatsinks engineered to avoid interference with your system memory modules.
Which alternative cooler is best if your case has limited vertical clearance?
The Thermaltake UX150 and UX150-L provide the closest compact dimensions to the i70C. The UX150 has a height of 2.83 inches, while the UX150-L stands at 2.98 inches tall. Both remain under three inches in total height, making them practical alternatives if your small-form-factor enclosure cannot accommodate a taller mini-tower or standard 120mm tower cooler.
How does the Jonsbo EVO 1400 differ from flat low-profile coolers?
The Jonsbo EVO 1400 is a mini-tower cooler that stands 5.1 inches tall, whereas the Cooler Master i70C uses a flat, top-flow format. It directs airflow horizontally across four copper heat pipes using a 92mm ARGB fan. This design features offset memory clearance to keep your RAM slots unobstructed, but your chassis must have enough vertical room to support its 130mm height.
Do all of these Cooler Master i70C alternatives feature ARGB lighting?
Yes, every alternative on this list includes ARGB lighting. Whether you select a low-profile top-flow unit like the Thermaltake UX150, a mini-tower such as the Jonsbo EVO 1400, or a full-sized tower like the upHere 120mm, each model provides addressable RGB illumination. All options on the list also come in a black finish to coordinate with modern chassis interiors.
How much case height do you need for the upHere 120mm ARGB cooler?
You need at least 6.1 inches of vertical clearance above the motherboard for the upHere 120mm ARGB CPU air cooler. Its dimensions are 6.1 inches high, 5.12 inches long, and 2.87 inches wide. Unlike the 2.76-inch low-profile Cooler Master i70C, this four-heatpipe tower requires standard mid-tower enclosure depth to fit properly without contacting the side panel.