Best CPU Coolers for AM5: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right CPU cooler for AM5 depends on your chassis clearance and thermal requirements. We compared 15 models strictly using the specifications published on their official product listings. The Cooler Master Hyper 212 Halo CPU Cooler earns the top spot because its 154 mm single-tower design features four direct-contact heat pipes and runs at 27 dBA.
This guide helps you choose the proper cooler dimensions, heat pipe layout, and clearance for your AM5 motherboard and case.
Quick picks
The best fit for you
- You want a balanced ARGB cooler for mid-tower cases Cooler Master Hyper 212 Halo CPU Cooler Its 154 mm single-tower height and four direct-contact heat pipes fit standard enclosures while maintaining 27 dBA noise levels.
- You need hardware monitoring on a high-wattage processor Ocypus Dual-Tower CPU Cooler with Digital Display It offers 260W thermal headroom alongside an integrated digital display for real-time CPU metric tracking.
- You build inside an ultra-compact Mini-ITX chassis Thermalright AXP90 36mm Low-Profile Cooler Its low 36mm total profile and four heat pipes fit tight enclosures that cannot accommodate standard tower coolers.
- You run high-wattage hardware alongside tall memory modules Thermalright Dual Tower 5-Heatpipe CPU Cooler Its asymmetric dual-tower layout and five 8mm heat pipes support 275W TDP cooling without obstructing tall RAM.
Our 15 picks
Cooler Master Hyper 212 Halo CPU Cooler
Best for: standard mid-tower AM5 setups with ARGB
- Socket Compatibility
- AM5, LGA 1700
- Cooler Height
- 154mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 2050 RPM
- Lighting
- ARGB
The Cooler Master Hyper 212 Halo is a single-tower air cooler designed for AMD AM5 sockets. It features four 6mm direct-contact copper heat pipes, an aluminum fin stack, and a 154 mm total height for mid-tower clearance. The included 120 mm ARGB fan delivers up to 51.88 CFM of airflow at 27 dBA. This cooler suits you if you need a standard-height AM5 cooler with addressable lighting.
Pros
- Four 6mm direct-contact copper heat pipes
- 154 mm overall heatsink height fits standard mid-tower cases
- MF120 Halo2 fan runs at a specified 27 dBA maximum noise level
- Includes mounting brackets for AMD AM5 and AM4 sockets
Cons
- Single 120 mm fan configuration rather than a dual-fan setup
- Airflow rating reaches a maximum of 51.88 CFM
- 154 mm height is too tall for compact small-form-factor builds
Good fit if
- You need an AM5 cooler that fits cases with at least 154 mm of CPU clearance.
- You want a single-tower cooler with 3-pin motherboard-controllable ARGB lighting.
- You prefer a four-pipe direct-contact copper base.
Skip if
- You are building a low-profile mini-ITX system that cannot accommodate a 154 mm tower.
- You require a dual-tower or dual-fan cooling setup.
Verdict: Cooler Master Hyper 212 Halo Air Cooler provides a balanced 154 mm single-tower profile with four direct-contact heat pipes and quiet 27 dBA operation for AM5 builds. It is a reliable match if you want standard mid-tower clearance and addressable RGB lighting.
Thermaltake UX200 ARGB Tower Cooler
Best for: 130W AM5 builds with 5V ARGB motherboards
- Socket Compatibility
- AM5, LGA 1200
- Heat Pipes
- 4
- TDP Rating
- 130W
- Lighting
- ARGB
- Dimensions
- 5 × 3 × 6 inches
- Weight
- 2.19 ounces
The Thermaltake UX200 ARGB Tower Cooler is an air cooler compatible with AM5 and LGA 1200 sockets. It features four 6mm continuous direct-contact U-shaped copper heatpipes rated for processors up to 130W. Airflow comes from a nine-blade fan with a hydraulic bearing and 15 addressable LEDs that sync with 5V motherboard headers. It suits you if you need a 6-inch tall tower cooler for mid-range AM5 processors.
Pros
- Four 6mm direct-contact copper heatpipes
- Rated for CPUs up to 130W
- 15 addressable LEDs compatible with 5V RGB motherboard sync
- Hydraulic bearing fan with 9 high-airflow blades
Cons
- Rated limit of 130W caps processor heat dissipation
- 6-inch height requires sufficient PC case clearance
- Socket compatibility in specs lists only AM5 and LGA 1200
Good fit if
- You run an AM5 processor rated at or below 130W.
- You have a motherboard with a 5V ARGB header.
- You have a case with at least 6 inches of cooler height clearance.
Skip if
- You need cooling capacity beyond 130W.
- You have a low-profile case that cannot fit a 6-inch cooler.
- You lack a 5V addressable RGB header on your motherboard.
Verdict: Thermaltake UX200 ARGB Tower Cooler delivers direct-contact copper heatpipe cooling rated up to 130W for AM5 builds. It provides integrated 5V addressable lighting inside a 6-inch tall profile.
Ocypus Dual-Tower CPU Cooler with Digital Display
Best for: high-wattage builds needing on-cooler digital monitoring
- Socket Compatibility
- AM5
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- TDP Rating
- 260W
- Fan Speed
- 500-2000 ±10% RPM
- Color
- White
View on Amazon: Ocypus Dual-Tower CPU Cooler with Digital Display
This dual-tower air cooler handles thermal loads up to 260W on your AM5 processor. It features a top matrix digital display, twin fin stacks, and a 120mm PWM fan rated at 77 CFM airflow with 4.65 mmH2O static pressure. Measuring 6.22 inches tall, it fits standard mid-tower enclosures. It suits your build if you want integrated telemetry readouts alongside high-wattage cooling capacity.
Pros
- 260W rated thermal dissipation capacity
- Matrix digital display for system readouts
- 77 CFM airflow and 4.65 mmH2O static pressure
- Fluid dynamic bearing fan rated at 29 dB(A) maximum noise
Cons
- Digital display functionality requires downloading the Ocypus app
- Requires 6.22 inches of vertical clearance inside the case
Good fit if
- You run high-wattage AM5 workloads requiring up to 260W heat dissipation.
- You want on-cooler digital status monitoring visible through your side panel.
- You have a PC chassis with over 6.22 inches of cooler height clearance.
Skip if
- You prefer hardware telemetry that operates without proprietary background software.
- You are assembling a low-profile or space-constrained small form factor build.
Verdict: Ocypus Dual-Tower CPU Cooler with Digital Display provides 260W thermal headroom and integrated metrics for power-dense AM5 configurations. Its 6.22-inch height and software requirements suit builders with standard mid-tower cases seeking real-time hardware tracking.
Thermalright Peerless Assassin 120 Dual Fan Cooler
Best for: AM5 builds needing dual-tower air cooling
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
- Fan Speed
- 1550rpm±10%
View on Amazon: Thermalright Peerless Assassin 120 Dual Fan Cooler
The Thermalright Peerless Assassin 120 is a dual-tower air cooler built for AM5 and multiple Intel sockets. You get six 6mm copper heat pipes paired with two 120mm PWM fans that move up to 66.17 CFM of air. Standing 157mm tall, it fits standard mid-tower enclosures while keeping noise at or below 25.6 dB(A). It suits you if you need balanced dual-fan airflow on your motherboard.
Pros
- Six 6mm pure copper sintered heat pipes with AGHP technology
- Dual 120mm PWM fans delivering up to 66.17 CFM airflow
- Maximum rated noise level of 25.6 dB(A)
- Wide socket compatibility including AMD AM5 and AM4
Cons
- 157mm overall height requires adequate case clearance
- No integrated RGB or ARGB lighting included
Good fit if
- You need a dual-tower cooler with six copper heat pipes for an AM5 build.
- You want two 120mm PWM fans that operate at or below 25.6 dB(A).
- You have a PC chassis with at least 157mm of CPU cooler clearance.
Skip if
- You build in a compact mini-ITX enclosure that requires a low-profile cooler.
- You want built-in ARGB lighting on your cooler fans.
Verdict: Thermalright Peerless Assassin 120 Dual-Tower Cooler provides reliable AM5 thermal management through six copper heat pipes and dual 120mm PWM fans. It gives you solid twin-fin performance without pushing case clearance past 157mm.
Thermalright Peerless Assassin 120 White Dual Tower
Best for: white AM5 builds needing dual-tower air cooling
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 White Dual Tower
This dual-tower air cooler features six 6 mm copper heat pipes, an aluminum fin stack, and two 120 mm PWM fans designed to fit AM5 motherboards. It delivers up to 66.17 CFM of airflow while keeping sound output at or below 25.6 dB(A). You will find it well suited if you need reliable dual-fan heat dissipation for your AM5 processor in an all-white build.
Pros
- Includes mounting hardware for AMD socket AM5
- Six 6 mm copper heat pipes with a pure copper base
- Dual 120 mm PWM fans generate up to 66.17 CFM of airflow
- Maximum rated noise level remains at or below 25.6 dB(A)
Cons
- 157 mm heatsink height requires adequate PC case clearance
- No integrated RGB or ARGB lighting included
Good fit if
- You want a dual-tower cooler with native AM5 mounting support.
- You are assembling an all-white desktop system.
- You prioritize quiet operation capped at 25.6 dB(A).
Skip if
- You have a compact case with under 157 mm of cooler clearance.
- You want built-in lighting effects on your CPU cooler.
Verdict: Thermalright Peerless Assassin 120 White CPU Cooler pairs a dual-tower aluminum heatsink with six copper heat pipes for AM5 systems. It provides balanced airflow and low noise for standard white desktop setups.
Thermalright 47mm Low-Profile CPU Cooler
Best for: compact Mini-ITX AM5 PC builds
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
This compact cooler pairs native AM5 socket support with an ultra-short 47mm total height for small-form-factor builds. You get four 6mm heatpipes, a black nickel-plated heatsink, and a slim 92mm PWM fan rated at 22.4 dBA or lower. It suits you if you assemble a tight Mini-ITX chassis where standard tower coolers cannot physically clear your side panel.
Pros
- Low 47mm overall profile fits tight Mini-ITX cases
- Four 6mm heatpipes with secondary reflow soldering
- Slim 92mm PWM fan rated at 22.4 dBA maximum noise
- All-metal mounting platform includes a dedicated backplate
Cons
- Smaller 92mm fan moves less air than 120mm alternatives
- Lacks integrated RGB lighting
Good fit if
- You build a space-constrained Mini-ITX system on the AM5 platform.
- You need a low-clearance cooler limited to 47mm total height.
- You want quiet fan operation capped at 22.4 dBA.
Skip if
- You have room in your case for full-size 120mm dual-tower coolers.
- You require built-in addressable RGB illumination.
Verdict: Thermalright 47mm Low-Profile ITX Cooler delivers a compact 47mm height and quiet 22.4 dBA profile for tight AM5 builds. It offers solid thermal hardware without crowding cramped mini-ITX enclosures.
Thermalright AXP90 36mm Low-Profile Cooler
Best for: ultra-compact Mini-ITX AM5 builds
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- System Type
- ITX
- Features
- Fan
This compact unit is an ultra-low-profile air cooler designed for space-constrained computer builds. It mounts directly to AMD AM5 sockets using an all-metal backplate system. At an overall height of 36mm, it clears cramped small-form-factor cases easily. Four 6mm heatpipes transfer heat into nickel-plated fins, while the slim 92mm PWM fan keeps noise at or below 22.4 dBA. It suits you if you need a minimal AM5 setup.
Pros
- Ultra-low 36mm total height for small-form-factor cases
- Four 6mm AGHP heatpipes with nickel plating
- Maximum rated fan noise level of 22.4 dBA
- All-metal mounting platform with backplate fastener
Cons
- Smaller heatsink mass than full-sized tower models
- No integrated RGB lighting hardware listed
Good fit if
- You build inside a compact Mini-ITX case with strict clearance limits.
- You run an AMD AM5 processor requiring a 36mm cooler profile.
- You want a low-noise slim fan rated at 22.4 dBA or less.
Skip if
- You have case space for a larger 120mm tower cooler.
- You require onboard RGB illumination for your build.
Verdict: Thermalright 36mm Low Profile ITX Cooler provides essential AM5 socket compatibility in ultra-dense chassis layouts. Its 36mm total profile and four heatpipes deliver compact cooling where standard heatsinks do not fit.
Iceberg Thermal IceSLEET G4 120mm Cooler
Best for: Quiet AM5 setups needing clip-free mounting
- Socket Compatibility
- AM5, LGA 1700
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 180W
- Fan Speed
- 1400 RPM
- Lighting
- ARGB
The Iceberg Thermal IceSLEET G4 Midnight Cooler is a single-tower AM5 air cooler built with four direct-touch nickel-plated heat pipes and a 120mm ARGB PWM fan. It handles processors up to a 180W TDP rating while delivering 58.5 CFM of airflow at noise levels down to 22.5 dBA. This unit suits you if you want clip-free slide-lock fan mounting and quiet operation for your setup.
Pros
- Rated for processors up to 180W TDP
- Slide-lock fan mounting eliminates standard wire clips
- Quiet 22.5 dBA maximum noise level with auto start and stop
- Four direct-touch nickel-plated heat pipes
Cons
- Maximum fan speed reaches only 1400 RPM
- Height of 6.14 inches requires sufficient case clearance
Good fit if
- You want clip-free fan installation using slide-lock mounting.
- You need a quiet AM5 cooler rated for up to 180W TDP.
- You prefer an all-black heatsink with an ARGB fan.
Skip if
- You have a compact case with under 6.15 inches of cooler height clearance.
- You require fan speeds higher than 1400 RPM.
Verdict: Iceberg Thermal IceSLEET G4 Midnight Cooler offers clean, clip-free slide-lock fan mounting alongside a quiet 180W TDP cooling capacity for your AM5 system.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
Best for: high-wattage AM5 systems with tall RAM
- Socket Compatibility
- AM4, AM5, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 160 mm
- Heat Pipes
- 5
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm, 140 mm
- TDP Rating
- 275 W
View on Amazon: Thermalright Dual Tower 5-Heatpipe CPU Cooler
This dual-tower air cooler features five 8mm heat pipes and handles heat loads up to 275W TDP on AM5 sockets. It pairs a 120mm fan with a 140mm fan, moving up to 95.5 CFM of air through twin aluminum fin stacks. With 62mm of RAM clearance and an asymmetric layout, it suits you if you run high-wattage desktop processors in standard cases.
Pros
- Five 8mm AGHP heat pipes rated for up to 275W TDP
- Dual PWM fans delivering maximum airflow up to 95.5 CFM
- Asymmetric heatsink layout supports memory modules up to 62mm tall
- S-FDB bearings rated for up to 20,000 hours of operating life
Cons
- Requires a chassis width greater than 210mm for its 160mm height
- Total assembly weighs 1.34kg
- Lacks integrated RGB lighting
Good fit if
- You need up to 275W TDP cooling capacity for an AM5 build.
- You use tall memory modules up to 62mm in height.
- You have a PC case with at least 160mm of CPU cooler clearance.
Skip if
- You build inside a compact case with less than 160mm of cooler clearance.
- You require built-in RGB or ARGB lighting hardware.
Verdict: Thermalright Dual Tower 5-Heatpipe Cooler delivers high-capacity 275W TDP cooling using five 8mm pipes and mixed-size dual PWM fans. Its asymmetric build preserves clearance for your top expansion slot and tall RAM modules.
Thermalright Peerless Assassin Dual Tower Air Cooler
Best for: dual-tower air cooling on AM5 processors
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin Dual Tower Air Cooler
This dual-tower air cooler pairs an aluminum heatsink with six 6mm heat pipes and two 120mm PWM fans to handle your AM5 processor. It stands 155mm tall, delivers up to 66.17 CFM of airflow, and runs up to 1550 RPM while keeping noise at or below 25.6 dB(A). It suits you if you need robust dual-fan cooling for an AMD AM5 setup and have clearance in your PC case.
Pros
- Six 6mm copper sintered heat pipes with AGHP technology
- Dual 120mm PWM fans delivering up to 66.17 CFM airflow
- Dual-tower aluminum heatsink with electroplated reflow soldering
- Maximum rated fan operating noise level of 25.6 dB(A)
Cons
- Requires original motherboard backplate for AM5 installation
- Total height of 155mm requires compatible case clearance
- Base model includes no integrated lighting
Good fit if
- You want a dual-tower heatsink with two 120mm PWM fans for AM5.
- You have a PC chassis with at least 155mm of cooler clearance.
- You have the stock AMD mounting backplate from your motherboard.
Skip if
- You need a low-profile cooler for a compact mini-ITX enclosure.
- You do not have the original AMD backplate for your motherboard.
Verdict: Thermalright Peerless Assassin Dual Tower Air Cooler delivers dual-fan, six-heatpipe cooling for AM5 systems with standard chassis clearance. It provides up to 66.17 CFM of airflow while maintaining rated noise levels under 25.6 dB(A).
Thermalright Assassin X120 120mm Air Cooler
Best for: compact AM5 builds requiring 148mm clearance
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Material
- Aluminum
Thermalright Assassin X120 120mm Air Cooler mounts to AM5 motherboards with included metal fasteners. It uses four 6mm heat pipes paired with an aluminum heatsink cover and a 148mm total height. A 120mm PWM fan delivers up to 66.17 CFM of airflow at 1550 RPM while keeping noise under 25.6 dBA. You get a compact tower cooler that fits cases with limited clearance.
Pros
- Four 6mm heat pipes with AGHP technology
- Compact 148mm height fits mid-sized cases
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Maximum rated fan noise stays below 25.6 dBA
Cons
- Includes a single fan rather than a dual-fan setup
- Offers four heat pipes rather than six or more
Good fit if
- You need an AM5 tower cooler with a total height under 150mm.
- You want a 120mm PWM fan that operates under 25.6 dBA.
Skip if
- You need a dual-tower cooler with dual fans.
- You want a cooler with more than four heat pipes.
Verdict: Thermalright Assassin X120 120mm Air Cooler delivers four 6mm heat pipes and quiet PWM cooling within a modest 148mm height. It is a straightforward single-tower option for AM5 builds with tight vertical clearances.
Thermalright Peerless Assassin 120 White
Best for: white AM5 mid-tower desktop builds
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200
- Cooler Height
- 157 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1500 RPM
This dual-tower air cooler pairs an all-white aluminum heatsink with six 6mm copper heat pipes and two 120mm PWM fans. Built with AM5 socket mounting support, it delivers up to 66.17 CFM of airflow at 1500 RPM while maintaining noise levels at or below 25.6 dB(A). Its 157mm height fits standard mid-tower cases, making it a dependable choice if you need balanced thermal control for your AMD processor.
Pros
- Dual-tower heatsink with six 6mm AGHP copper heat pipes
- Two 120mm PWM fans delivering up to 66.17 CFM airflow
- Offset asymmetric design maintains memory and primary expansion slot clearance
- Specified maximum noise level of 25.6 dB(A)
Cons
- Height of 157mm requires adequate chassis clearance
- Total weight of 1.02 kg (2.25 lb) adds significant mass to the motherboard socket area
Good fit if
- You want an all-white dual-tower cooler for an AM5 socket motherboard.
- You need dual 120mm PWM fans capable of pushing up to 66.17 CFM of airflow.
Skip if
- You use a compact or small-form-factor case with less than 157mm of cooler clearance.
- You prefer a lightweight single-tower design.
Verdict: Thermalright Peerless Assassin 120 White provides robust AM5 cooling through its dual-tower array, six 6mm heat pipes, and dual 120mm fans. It offers reliable thermal management and clean aesthetics for standard-sized desktop builds.
Thermalright Peerless Assassin 120 White ARGB Cooler
Best for: white AM5 builds needing dual-tower cooling
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1150, LGA 1151
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler
This dual-tower air cooler brings two 120 mm ARGB PWM fans and six 6 mm copper heat pipes to your AM5 setup. Standing 155 mm tall with an all-white finish, it delivers up to 66.17 CFM of airflow while keeping rated sound output at or below 25.6 dB(A). It suits you if you want high-capacity dual-fan cooling with addressable lighting in a standard mid-tower chassis.
Pros
- Six 6 mm sintered copper heat pipes with AGHP technology
- Two 120 mm PWM ARGB fans pushing up to 66.17 CFM
- Low maximum rated noise level of 25.6 dB(A)
- Wide socket support covering AM5, AM4, and Intel LGA 1700/1851
Cons
- Height of 155 mm requires careful case clearance checking
- Dual-tower 135 mm width can create tight clearance near RAM slots
Good fit if
- You want a white dual-tower cooler with integrated ARGB lighting for an AM5 build.
- You have a PC case with at least 155 mm of vertical CPU cooler clearance.
- You require dual-fan airflow up to 66.17 CFM with PWM speed control.
Skip if
- You use a compact or small-form-factor case that cannot clear 155 mm in height.
- You prefer an all-black design or a setup without lighting.
Verdict: Thermalright Peerless Assassin 120 White ARGB Cooler pairs six copper heat pipes with two 120 mm fans to deliver capable thermal control for AM5 processors. Its white aesthetic and addressable lighting fit mid-tower builds that accommodate a 155 mm height profile.
Thermalright Assassin X 120 ARGB Cooler
Best for: compact mid-tower AM5 builds needing ARGB
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
This single-tower air cooler mounts to socket AM5 using included metal brackets. At 148 mm tall, it fits compact mid-tower cases that lack clearance for taller 160 mm heatsinks. Four 6 mm copper heat pipes draw heat to the aluminum fins, while a 120 mm ARGB PWM fan pushes up to 66.17 CFM of airflow at 25.6 dB(A). It gives you balanced everyday cooling with addressable lighting.
Pros
- 148 mm total height fits mid-sized cases with limited clearance
- Four 6 mm AGHP copper heat pipes prevent orientation-based efficiency loss
- Includes 120 mm PWM ARGB fan with maximum 66.17 CFM airflow
- Rated operational fan noise stays at or below 25.6 dB(A)
Cons
- Features four heat pipes compared to larger six-pipe designs
- Includes a single fan rather than a dual-fan push-pull configuration
Good fit if
- You need an AM5 cooler under 150 mm tall for tighter case clearance.
- You want addressable RGB lighting paired with standard 4-pin PWM speed control.
- You prefer a pure copper base with anti-gravity heat pipe design.
Skip if
- You want a dual-tower heatsink with two fans for maximum heat dissipation.
- You prefer a clean non-RGB build without lighting cables.
Verdict: Thermalright Assassin X 120 ARGB Cooler provides a compact 148 mm single-tower profile, four copper heat pipes, and quiet 25.6 dB(A) ARGB airflow for AM5 builds.
Thermalright Burst Assassin 120 ARGB
Best for: AM5 builds requiring a compact single tower
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151
- Cooler Height
- 154 mm
- Heat Pipes
- 6
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
The Thermalright Burst Assassin 120 ARGB is a single-tower CPU cooler built for standard mid-tower setups. For your AM5 build, it provides native socket mounting alongside six 6mm heat pipes and a pure copper base. Its 154mm height fits standard computer cases without clearance issues. The included 120mm PWM fan pushes up to 66.17 CFM at a maximum noise level of 25.6 dB(A), making it suitable if you need quiet, balanced cooling.
Pros
- Six 6mm pure copper heat pipes with AGHP technology
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Maximum rated fan noise level of 25.6 dB(A)
- 154mm total height fits mid-sized cases
Cons
- Single-fan setup moves less total air than dual-fan coolers
- 154mm height does not fit low-profile small form factor cases
Good fit if
- You have an AM5 motherboard and want a six-heatpipe single-tower design.
- You need a CPU cooler height of 154mm or less to fit your chassis.
- You want an integrated 120mm ARGB fan rated at 25.6 dB(A) or quieter.
Skip if
- You build in an ultra-compact mini-ITX enclosure that requires a low-profile heatsink.
- You prefer a dual-tower heatsink configuration for multi-fan air distribution.
Verdict: Thermalright Burst Assassin 120 ARGB delivers six copper heat pipes and a 120mm ARGB fan within a 154mm single-tower footprint for AM5 processors. It provides solid airflow and low noise without occupying dual-tower case space.
Specifications side by side
| Spec | Cooler Master Hyper 212 Halo CPU Cooler | Thermaltake UX200 ARGB Tower Cooler | Ocypus Dual-Tower CPU Cooler with Digital Display | Thermalright Peerless Assassin 120 Dual Fan Cooler | Thermalright Peerless Assassin 120 White Dual Tower | Thermalright 47mm Low-Profile CPU Cooler | Thermalright AXP90 36mm Low-Profile Cooler | Iceberg Thermal IceSLEET G4 120mm Cooler | Thermalright Dual Tower 5-Heatpipe CPU Cooler | Thermalright Peerless Assassin Dual Tower Air Cooler | Thermalright Assassin X120 120mm Air Cooler | Thermalright Peerless Assassin 120 White | Thermalright Peerless Assassin 120 White ARGB Cooler | Thermalright Assassin X 120 ARGB Cooler | Thermalright Burst Assassin 120 ARGB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | Intel, AM5, AMD, LGA 1200 | AM5, AM4, LGA 115X/1200/1700/1851 | not specified | AM4, AM5, LGA115x/1200/1700/1851/2011 | AM4, AM5, LGA115x/1200/1700/1851 | AM4, AM5, LGA1150/1151/1200/1700/1851 | LGA1700, 1200, 115X, 1366, AM5, AM4 | AM4, AM5, LGA1150, LGA1200, LGA1700 | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA1700, LGA1851, LGA1200 | not specified | not specified | not specified | AM4, AM5, LGA1700/1851/1150/1151/1200 |
| Cooler Height | 154mm | not specified | not specified | 157mm | 157mm | 47mm | 36mm | not specified | 160 mm | 155 mm | 148 mm | 157 mm | 155 mm | 148 mm | 154 mm |
| Heat Pipes | 4 | 4 | not specified | 6 | 6 | 4 | 4 | 4 | 5 | 6 | 4 | 6 | 6 | 4 | 6 |
| Tower Design | not specified | not specified | Dual-Tower | Double tower | Dual-Tower | Low-Profile | Low-Profile | not specified | Dual-Tower | Dual-Tower | not specified | Dual-Tower | Dual-Tower | Single-Tower | Single-Tower |
| Fan Size | 120mm | not specified | 120mm | 120mm | 120mm | 92mm | not specified | 120mm | 120 mm, 140 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
| TDP Rating | not specified | 130W | 260W | not specified | not specified | not specified | not specified | 180W | 275 W | not specified | not specified | not specified | not specified | not specified | not specified |
| Fan Speed | 2050 RPM | not specified | 500-2000 ±10% RPM | 1550rpm±10% | 1550 RPM | not specified | not specified | 1400 RPM | 1850 RPM | 1550 RPM | 1550 RPM | 1500 RPM | 1550 RPM | 1550 RPM | 1550 RPM |
| Lighting | ARGB | ARGB | not specified | not specified | not specified | not specified | not specified | ARGB | not specified | not specified | not specified | ARGB | ARGB | ARGB | ARGB |
| System Type | not specified | not specified | not specified | not specified | not specified | ITX | ITX | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color | Black | RGB Tower | White | PA120 | White | Black | AXP90-X36 | Black | Black | PA120 SE | not specified | White | White | AX120R SE ARGB | BA120 ARGB |
| Material | Aluminum | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Aluminum | not specified | Aluminum | Aluminum | Aluminum | not specified | not specified |
| Features | Fan | not specified | not specified | not specified | not specified | Fan | Fan | Fan | Fan | not specified | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 6.06 × 4.88 × 2.87 inches | 5 × 3 × 6 inches | 5 × 5.35 × 6.22 inches | 6.18 × 5.31 × 4.92 inches | 6.18 × 5.31 × 4.92 inches | 3.74 × 3.74 × 1.26 inches | 3.74 × 3.7 × 0.83 inches | 3.19 × 5.47 × 6.14 inches | 6.3 × 5.75 × 5.51 inches | 6.1 × 5.31 × 4.92 inches | 4.72 × 2.8 × 5.83 inches | 6.18 × 5.31 × 4.92 inches | 4.92 × 5.31 × 6.1 inches | 4.92 × 2.8 × 5.83 inches | 4.9 × 2 × 6 inches |
| Weight | 1.53 pounds | 2.19 ounces | not specified | 1 pounds | 2.2 pounds | 1.1 pounds | 14.4 ounces | not specified | 2.2 pounds | 2 pounds | 1.42 pounds | 2 pounds | 1.87 pounds | 1.39 pounds | 1.12 pounds |
| Size | V2 | AMD/Intel | Dual-Tower | PA120 series | PA120 series | Height 47mm | Height 36mm | not specified | 5 Heat Pipes | PA120 SE series | not specified | not specified | PA120 SE series | 4 Heatpies | 4 Heatpies |
| Model | RR-S4KK-20PA-R1 | CL-P065-AL12SW-A | Air Iota A62 WH | LM-PA 120 | pa120 White | AXP90 X47 BLACK | AXP90 X36 | ICESLEETG4MD-BBB-00A | FC140 BLACK | PA120 SE | AX120 Refined SE | PA120 White-D2 | not specified | not specified | BA120 ARGB-D1 |
Is AM5 Compatibility Worth It?
AM5 compatibility confirms a cooler mounts directly onto AM5 socket motherboards. Listed models pair this socket standard with various designs, including low-profile ITX units at 36mm or 47mm heights and dual towers reaching 275W TDP ratings. Many AM5 coolers also specify multi-socket coverage for AM4 alongside Intel sockets like LGA 1700 and LGA 1851. Selecting an AM5-rated cooler ensures your heatsink hardware matches socket specifications, whether you run a 130W setup, a 4-heatpipe single tower, or a 6-heatpipe dual-tower configuration.
Worth it if
- You are assembling a desktop system on an AM5 socket motherboard.
- You need a cooler that supports both AM5 and Intel sockets like LGA 1700 or LGA 1851.
- You operate an AM5 processor that requires up to 260W or 275W TDP cooling.
Skip it if
- You run a motherboard socket outside of AM5 or the listed Intel LGA sockets.
- You build an Intel system using an AM5-only model such as the Ocypus cooler.
If your case lacks height clearance for large air heatsinks, you can select an aio liquid cooler for AM5 using radiator dimensions instead.
How We Chose AM5 Coolers
To select the 15 CPU coolers for this guide, we identified AM5 socket compatibility directly from manufacturer specifications and feature lists on each listing. A cooler is included when the product title or feature list explicitly states AM5 support. You see only one size or variant per product family to keep your options distinct.
All cooler details come strictly from published specifications, as products are not physically handled. When organizing the list, products in stock appear first. You can evaluate key physical specifications such as cooler height, heat pipe counts, and fan sizes to find the right hardware match for your build.
How to Choose an AM5 CPU Cooler
-
Count Heat Pipes for Load
You should examine the number and thickness of the heat pipes to gauge thermal transfer capacity. Basic air coolers use four direct-contact 6mm pipes to manage moderate processor heat. Heavier workloads benefit from arrays with five or six heat pipes that disperse thermal energy across a broader fin surface. The Thermalright Dual Tower 5-Heatpipe CPU Cooler uses five 8mm heat pipes to support higher heat density. Checking the heat pipe specification helps you select enough physical heat transfer channels for your specific AM5 computing tasks.
-
Evaluate Rated Thermal Wattage
You must verify the rated wattage capacity against the demands of your AM5 processor. Coolers specify wattage limits to indicate how much heat their heatsinks can dissipate under sustained continuous operation. The Thermaltake UX200 ARGB Tower Cooler provides a 130W rating suited for everyday desktop tasks and entry-level AM5 chips. If you run intensive rendering or unconstrained multi-core jobs, you need a cooler with a higher thermal threshold. Comparing manufacturer wattage specifications prevents you from pairing a hot chip with a heatsink designed only for low-power workloads.
-
Compare Decibel Noise Ratings
You should check the published decibel ratings if you want a quiet workspace. Acoustic specs show the maximum sound output when cooling fans run at peak speed. The Thermalright Peerless Assassin Dual Tower Air Cooler specifies noise output under 25.6 dB(A) while delivering 66.17 CFM of airflow. Lower decibel numbers indicate quieter operation under heavy processing loads. If you work in a quiet room or record audio, choosing a unit with a sub-26 dB(A) specification keeps fan hum unobtrusive without sacrificing the airflow needed to cool your AM5 processor.
-
Check Fan Mounting Mechanisms
You should inspect how the cooling fan attaches to the heatsink body. Traditional air coolers rely on thin metal wire clips that can slip or scratch fin edges during installation. Alternative designs use integrated brackets or slide-lock systems. The Iceberg Thermal IceSLEET G4 120mm Cooler features clip-free slide-lock fan mounting for a direct, secure fit. If you value a smooth assembly process or anticipate removing fans regularly for fin stack cleaning, checking the mounting hardware spec ensures you select a cooler that installs cleanly without frustrating fan clips.
-
Verify Secondary Socket Compatibility
You should verify additional socket support if you plan to repurpose your cooler across different motherboards. While AM5 compatibility handles your current AMD build, several models include mounting brackets for legacy AMD setups and multiple Intel generations. The Thermalright Assassin X120 120mm Air Cooler lists compatibility for AM4, AM5, LGA 1851, LGA 1200, LGA 1150, and LGA 1151. Checking this list ensures you can move the cooler into a secondary system or upgrade to Intel platforms later without purchasing separate hardware brackets or replacing the entire heatsink assembly.
-
Review Motherboard Lighting Support
You must check your motherboard headers before choosing an illuminated air cooler. Addressable RGB fans require compatible 3-pin 5V connections to synchronize lighting patterns through motherboard software. The Thermalright Burst Assassin 120 ARGB integrates addressable illumination directly into its fan frame. If your motherboard lacks 5V ARGB pin headers or if you prefer a blackout build without extra cabling, choosing a non-illuminated model simplifies cable management. Matching the cooler's lighting specification to your motherboard avoids non-functional LEDs and saves internal routing space.
Frequently asked questions
Can an AM5 CPU cooler fit older AMD or Intel motherboards?
Yes, many AM5 coolers support multiple CPU sockets across both AMD and Intel platforms. For example, the Thermalright Peerless Assassin 120 lists compatibility with AMD AM4 alongside Intel LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. Other models, such as the Cooler Master Hyper 212 Halo, support LGA 1700, while the Thermaltake UX200 covers LGA 1200. Always check the published socket list before switching boards.
What is the lowest profile AM5 cooler available for compact chassis builds?
The Thermalright AXP90 36mm Low-Profile Cooler has the lowest profile among listed AM5 options. It measures 36 mm in total height and utilizes four heat pipes for space-constrained mini-ITX enclosures. If your case allows slightly more clearance, the Thermalright 47mm Low-Profile CPU Cooler provides a 47 mm height profile and operates at a quiet rated noise level of 22.4 dBA.
How much thermal capacity do dual-tower AM5 air coolers deliver?
Dual-tower air coolers on AM5 deliver up to 260W or 275W of cooling capacity based on manufacturer specifications. The Ocypus Dual-Tower CPU Cooler provides 260W of thermal headroom alongside its integrated digital monitoring display. For even higher requirements, the Thermalright Dual Tower 5-Heatpipe CPU Cooler specifies a 275W TDP rating using five 8mm heat pipes and dual PWM fans to manage processor heat.
Do all AM5 CPU coolers use standard wire fan clips?
No, some AM5 coolers use alternative mounting mechanisms instead of standard metal wire clips. For instance, the Iceberg Thermal IceSLEET G4 120mm Cooler features a clip-free slide-lock fan mounting design. This allows you to slide and lock the fan directly onto the heatsink without manipulating wire brackets. The cooler also provides a 180W TDP rating and ARGB lighting within a 120mm fan form factor.
Which AM5 air coolers include integrated ARGB lighting?
Several AM5 coolers feature addressable RGB lighting across single-tower and dual-tower form factors. Single-tower options include the Cooler Master Hyper 212 Halo, the Thermaltake UX200 ARGB Tower Cooler, and the Thermalright Burst Assassin 120 ARGB. If you require a dual-tower heatsink with lighting, the Thermalright Peerless Assassin 120 White ARGB Cooler combines addressable lighting with six copper heat pipes and two 120 mm fans.
Can you get a single-tower AM5 cooler with six heat pipes?
Yes, you can find single-tower AM5 heatsinks configured with six heat pipes. While many single towers use four pipes, the Thermalright Burst Assassin 120 ARGB features six copper heat pipes within a 154mm single-tower footprint. This gives you extra thermal conduction pathways paired with a 120mm fan, avoiding the wider motherboard footprint and RAM overhang typical of larger dual-tower cooler designs.