15 Best CPU Coolers with 5 Heat Pipes, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing a CPU cooler with 5 Heat Pipes provides efficient thermal transfer across multiple contact channels without overwhelming standard chassis layouts. We compared 15 models strictly against their published specifications to highlight how dimensions, fan layouts, and socket hardware vary across the lineup.
The Vetroo V5 5 Heat Pipe CPU Cooler takes the top spot by combining five direct-access heat pipes, PWM airflow, and 5V 3-pin ARGB synchronization into a compact frame. This comparison helps you evaluate socket compatibility, heatsink height, and cooling capacity to pick the ideal unit for your setup.
Quick picks
The best fit for you
- You want standard desktop cooling with addressable RGB lighting Vetroo V5 5 Heat Pipe CPU Cooler Five direct-access heat pipes combine with 5V 3-pin ARGB synchronization and PWM-regulated airflow.
- You need a low-profile cooler for compact cases ID-COOLING 57mm Low-Profile CPU Cooler A 57mm height profile allows installation in small form factor builds requiring five heat pipes.
- You need maximum cooling headroom for high-wattage processors Thermalright Dual Tower 5-Heatpipe CPU Cooler Dual-tower construction with five 8mm heat pipes supports thermal loads up to 275W TDP.
- You want an all-white heatsink with addressable lighting Thermalright Assassin King 120 SE White ARGB An all-white frame incorporates ARGB lighting and five 6mm heat pipes within a 148mm profile.
Our 15 picks
Vetroo V5 5 Heat Pipe CPU Cooler
Best for: mainstream AMD and Intel desktop builds
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA 1851/1700/1200/1150, AM5/AM4
- Fan Speed
- 800-1700 RPM
- Lighting
- ARGB
- Color
- Black
- Dimensions
- 5.83 × 5.04 × 2.95 inches
This Vetroo air cooler uses five direct-access heat pipes, an aluminum fin stack, and a copper base to handle heat dissipation. Its single fan operates between 800 and 1700 RPM via a 4-pin PWM header, while integrated 5V 3-pin ARGB syncs with your motherboard lighting. It fits standard Intel LGA 1851, 1700, 1200, 1150 and AMD AM5 or AM4 sockets, making it a direct match if you need dependable multi-socket cooling.
Pros
- Five direct-access heat pipes with copper base and aluminum fins
- 4-pin PWM control ranging from 800 to 1700 RPM
- 5V 3-pin ARGB motherboard lighting synchronization
- Fan fitted with nine blades and eight anti-vibration rubber pads
- Supports Intel LGA 1851/1700/1200/1150 and AMD AM5/AM4
Cons
- Requires a 5V 3-pin motherboard header to operate lighting control
- Single-fan configuration out of the box
- Fan does not stop completely, with an 800 RPM minimum speed
Good fit if
- You run an AMD AM5/AM4 or Intel LGA 1851/1700/1200/1150 motherboard.
- You have an available 5V 3-pin addressable RGB header for lighting control.
- You want a PWM fan with an operational range between 800 and 1700 RPM.
Skip if
- You use an unsupported workstation or legacy socket not listed in the specifications.
- You lack a 5V 3-pin ARGB connection on your motherboard.
Verdict: Vetroo V5 5 Heat Pipe CPU Cooler combines five direct-access heat pipes, PWM-regulated airflow, and 5V 3-pin ARGB synchronization in a compact footprint. It fits current Intel and AMD mainstream desktop sockets without requiring proprietary lighting controllers.
ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler
Best for: push-pull airflow with zero RAM interference
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Fan Size
- 120mm
- Color
- Black
- Dimensions
- 5 × 4.25 × 5.9 inches
This ID-COOLING unit is a tower air cooler equipped with 5 direct contact heat pipes and dual 120mm PWM fans configured for push-pull airflow. Standing at 5.9 inches tall, it fits standard desktop enclosures while providing up to 76.16 CFM of air movement. Its heatsink profile avoids memory interference, even on compact mini-ITX motherboards. It suits you if you need broad socket support across AMD and Intel platforms.
Pros
- Dual 120mm PWM fans in push-pull configuration
- 5 direct contact heat pipes
- Maximum airflow rating of 76.16 CFM
- Memory-safe design prevents RAM interference on mini-ITX boards
Cons
- Noise level reaches up to 35.2 dB(A) at maximum speed
- Does not include integrated LED or ARGB lighting
Good fit if
- You want dual 120mm fans configured for push-pull airflow.
- You need clear RAM slot access on standard or mini-ITX motherboards.
- You run mainstream sockets such as AMD AM4/AM5 or Intel LGA1700.
Skip if
- You require an ultra-quiet fan profile below 35 dB(A) under full load.
- You want built-in ARGB or RGB lighting on the heatsink assembly.
Verdict: ID-COOLING Dual 120mm Fan 5 Heat Pipe Cooler provides push-pull airflow and 5 direct contact heat pipes while maintaining full clearance for your memory modules. It delivers solid socket flexibility across modern Intel and AMD platforms without interfering with tall RAM.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
Best for: high-wattage processors in wide PC cases
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1150, LGA1200, LGA1700
- Cooler Height
- 160 mm
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm, 140 mm
- TDP Rating
- 275 W
View on Amazon: Thermalright Dual Tower 5-Heatpipe CPU Cooler
You get a heavy-duty dual-tower heatsink with this Thermalright cooler. It pairs five 8mm heat pipes with one 120mm fan and one 140mm fan, delivering up to 95.5 CFM of airflow and a 275W TDP rating. The asymmetric layout preserves 62mm of memory clearance. This unit suits you if you run high-wattage desktop processors and have a chassis at least 210mm wide.
Pros
- Rated for up to 275W TDP heat dissipation
- Five 8mm heat pipes built with AGHP technology
- Dual PWM fans featuring both 120mm and 140mm sizes
- Asymmetric base layout allows 62mm RAM height clearance
Cons
- Tall 160mm height requires a PC case wider than 210mm
- Heavier than single-tower options at 1.34 kg
Good fit if
- You run high-draw processors requiring up to 275W TDP dissipation.
- You have a PC case with at least 160mm of vertical CPU clearance.
- You need clearance for tall memory modules up to 62mm high.
Skip if
- You use a compact or slim PC case narrower than 210mm.
- You want a lightweight heatsink assembly under 1 kg.
Verdict: Thermalright Dual Tower 5-Heatpipe Air Cooler pairs five 8mm heat pipes with two large PWM fans to handle thermal loads up to 275W TDP. It is a capable cooling solution if your chassis can accommodate its 160mm height.
Thermalright Assassin King 120 5-Heatpipe Cooler
Best for: medium-sized computer cases needing quiet cooling
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA 1700, 1851, 1200, AM4, AM5
- Cooler Height
- 148 mm
- Tower Design
- Single-Tower
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Assassin King 120 5-Heatpipe Cooler
This Thermalright Assassin King single-tower cooler uses five 6mm copper heat pipes and a pure copper base for thermal transfer. Standing 148mm tall, it is designed to fit medium-sized computer cases. The TL-C12C 120mm PWM fan delivers up to 66.17 CFM of airflow at 1,550 RPM while keeping noise at or below 25.6 dB(A). It gives you dependable five-pipe cooling for modern Intel and AMD sockets without extra bulk.
Pros
- Five 6mm copper heat pipes with pure copper base
- 148mm height fits medium-sized computer cases
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Quiet fan operation at or below 25.6 dB(A)
Cons
- Does not include RGB or ARGB lighting
- Includes only a single cooling fan
Good fit if
- You need a 148mm tall cooler designed for medium-sized cases.
- You want a five-heatpipe single tower without RGB lighting.
- You are building on an Intel LGA 1700/1851 or AMD AM4/AM5 platform.
Skip if
- You want integrated ARGB or lighting elements out of the box.
- You require a dual-fan cooling setup.
Verdict: Thermalright Assassin King 120mm CPU Cooler delivers five copper heat pipes and 66.17 CFM airflow in a compact 148mm profile. It provides balanced cooling for modern Intel and AMD sockets in medium-sized enclosures.
Thermalright Assassin King 120 SE CPU Cooler
Best for: quiet mid-tower builds on mainstream sockets
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 1700, 1200, 1150, 1151
- Cooler Height
- 148mm
- Fan Size
- 120mm
- TDP Rating
- 235W
- Features
- Fan
View on Amazon: Thermalright Assassin King 120 SE CPU Cooler
The Thermalright Assassin King 120 SE is a single-tower air cooler equipped with five 6mm heat pipes and a 148mm total height. Its included 120mm PWM fan moves up to 66.17 CFM of air while keeping rated noise under 25.6 dB(A). It is built for 235W heat dissipation on modern Intel and AMD sockets. This cooler suits you well if you need solid cooling clearance in standard desktop cases.
Pros
- Five 6mm AGHP III heat pipes
- Compact 148mm overall heatsink height
- 120mm PWM fan delivering up to 66.17 CFM
- Rated for up to 235W thermal capacity
Cons
- Lacks integrated RGB or ARGB lighting
- Includes only a single fan
Good fit if
- You need a tower cooler that fits cases with 148mm clearance limits.
- You use an Intel LGA 1700/1200/115X or AMD AM4/AM5 processor socket.
- You want quiet fan operation capped at 25.6 dB(A).
Skip if
- You want pre-installed RGB lighting on your cooler.
- You require a dual-fan heatsink setup straight out of the box.
Verdict: Thermalright Assassin King 120 SE Cooler delivers 235W thermal capacity and quiet airflow within a compact 148mm profile. It provides dependable five-heatpipe cooling for standard desktop sockets.
Thermalright Assassin King 120 SE White ARGB
Best for: white-themed builds needing five heat pipes
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 1700, 1851, 1200, 115X
- Cooler Height
- 148mm
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
- Lighting
- ARGB
View on Amazon: Thermalright Assassin King 120 SE White ARGB
The Thermalright Assassin King 120 SE White ARGB is a single-tower CPU cooler equipped with five 6mm heat pipes and an all-white finish. At 148mm tall, it fits compact mid-tower cases without clearance issues. Its 120mm PWM fan delivers up to 66.17 CFM of airflow at 25.6 dB(A) maximum noise. This cooler suits you if you want a dedicated white heatsink with addressable RGB lighting for compatible Intel or AMD processors.
Pros
- Five 6mm heat pipes built with AGHP III technology
- Compact 148mm overall cooler height
- 120mm PWM fan rated for up to 66.17 CFM airflow
- Maximum noise level specified at or below 25.6 dB(A)
Cons
- Includes only a single 120mm fan
- Bearing service life is rated at 20,000 hours
Good fit if
- You want an all-white heatsink with an ARGB fan for a color-matched build.
- You have a mid-sized computer case limited to 148mm cooler clearance.
- You use modern mainstream sockets like Intel LGA 1700/1851 or AMD AM4/AM5.
Skip if
- You need a dual-tower or dual-fan cooler for higher thermal loads.
- You prefer an all-black or non-RGB cooling setup.
Verdict: Thermalright Assassin King 120 SE White ARGB pairs five 6mm heat pipes with an all-white aesthetic and ARGB lighting in a compact 148mm frame. It provides solid 66.17 CFM airflow and broad Intel and AMD socket coverage without demanding extra case clearance.
Thermalright Assassin King 120 SE ARGB
Best for: mid-tower systems needing quiet ARGB cooling
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 1700, 1200, 1150, 1151
- Cooler Height
- 148mm
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
- Lighting
- ARGB
The Thermalright Assassin King 120 SE ARGB is a single-tower CPU cooler equipped with five 6 mm heat pipes and an aluminum heatsink. Its compact 148 mm total height fits easily into medium-sized computer cases. A single 120 mm PWM fan pushes up to 66.17 CFM of airflow while keeping rated noise under 25.6 dB(A). It suits you if you need reliable cooling and ARGB illumination for AMD AM4, AM5, or Intel LGA 1700 sockets.
Pros
- Five 6 mm heat pipes using AGHP III technology
- Compact 148 mm overall height fits medium-sized PC cases
- 120 mm PWM fan delivers 66.17 CFM with noise rated at or below 25.6 dB(A)
- Mounting hardware included for AMD AM4/AM5 and Intel LGA 115X/1200/1700
Cons
- Single-fan design offers less total airflow than dual-fan setups
- No support listed for server or threadripper sockets
Good fit if
- You need a 5-heat-pipe cooler with a moderate 148 mm clearance profile
- You want addressable RGB lighting on your CPU fan
- You use a modern AMD AM4/AM5 or Intel LGA 1700/1200 motherboard
Skip if
- You want a dual-tower or twin-fan cooling assembly
- You prefer a plain heatsink build with no RGB illumination
Verdict: Thermalright Assassin King 120 SE ARGB Cooler pairs five 6 mm heat pipes with a 148 mm profile that fits standard mid-sized cases without clearance issues. Its included 120 mm PWM fan provides 66.17 CFM of airflow alongside addressable lighting.
ID-COOLING 57mm Low-Profile CPU Cooler
Best for: compact Mini-ITX and small form factor builds
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Cooler Height
- 57mm
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Color
- Black
- Dimensions
- 2.17 × 9.06 × 4.72 inches
This ID-COOLING unit is a low-profile air cooler designed for compact builds. It features five heat pipes paired with a slim 120mm by 15mm PWM fan. The cooler measures 57mm in total height, allowing it to fit into tight Mini-ITX cases and small form factor enclosures. You get support for AMD AM4 and AM5, alongside Intel LGA 1700 and LGA 1851 sockets, offering reliable cooling where vertical clearance is restricted.
Pros
- Compact 57mm total height fits slim Mini-ITX enclosures
- Five heat pipes provide heat transfer in a low-profile footprint
- Slim 120mm PWM fan runs between 13.8 and 31.2 dB(A)
- Mounts to modern Intel LGA 1851/1700 and AMD AM5/AM4 sockets
Cons
- Slim 15mm fan limits maximum airflow to 54.6 CFM
- Lacks integrated RGB or ARGB lighting
Good fit if
- You are building a Mini-ITX or HTPC chassis with restricted vertical clearance.
- You need a five-heat-pipe cooler compatible with modern Intel or AMD platforms.
Skip if
- You have a standard tower case with room for full-sized air coolers.
- You want integrated lighting effects inside your computer case.
Verdict: ID-COOLING Low-Profile 5 Heat Pipe Cooler delivers compact thermal management with five heat pipes and a 57mm height profile. It is a solid choice when you need small form factor compatibility on modern sockets without sacrificing pipe count.
Thermalright Assassin King 120 Air Cooler
Best for: mid-sized PC cases with moderate height limits
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- AM4, AM5, Intel 1150/1151/1200/1700
- Cooler Height
- 148mm
- Fan Size
- 120mm
- TDP Rating
- 235W
- Fan Speed
- 1550 RPM ± 10%
This Thermalright heatsink gives you five 6mm heat pipes and a 148mm height that fits compact mid-tower cases. Its bundled 120mm PWM fan delivers up to 66.17 CFM of airflow while keeping rated noise under 25.6 dB(A). With a 235W TDP rating, it suits you if you need reliable air cooling for mainstream AMD or Intel desktop processors without tall clearance issues.
Pros
- Rated for processors up to 235W TDP
- Compact 148mm height fits mid-sized cases
- Five 6mm heat pipes with AGHP technology
- Quiet 120mm PWM fan rated at 25.6 dB(A) maximum noise
Cons
- Does not list LGA 1700 bracket support
- Lacks built-in RGB lighting
Good fit if
- You need a 148mm-tall cooler to fit inside a narrower case.
- You run a compatible AM4, AM5, or LGA 1200/115x processor.
- You want a 5-pipe cooler with a quiet fan rated under 26 dB(A).
Skip if
- You require out-of-the-box LGA 1700 socket mounting hardware.
- You want integrated ARGB fan lighting in your build.
Verdict: Thermalright Assassin King 120 Air Cooler balances a compact 148mm tower height with five 6mm heat pipes for cases with tight vertical clearance. It delivers 235W TDP support and quiet 120mm PWM airflow without taking up excess room.
MDWXDOFP 2U LGA4677 Server Cooler
Best for: 2U LGA4677 server chassis cooling
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA4677
- TDP Rating
- 400W
- System Type
- Server
- Server Height
- 2U
- Weight
- 1.76 ounces
The MDWXDOFP 2U LGA4677 Server Cooler is a dedicated rackmount heatsink designed for server chassis. It features 5 heat pipes, a high-speed PWM fan, and a rated 400W TDP to manage high-output 4th and 5th Generation LGA4677 processors. Its 2U profile fits slim enclosures where standard desktop towers cannot clear the chassis lid. If you run dense enterprise hardware needing compact thermal transfer, this unit provides the exact fit.
Pros
- Equipped with 5 heat pipes for thermal transfer
- Supports up to 400W TDP
- Compatible with 4th and 5th Gen Intel LGA4677 server sockets
- Compact 2U server height profile
- Includes high-speed PWM cooling fan
Cons
- Only compatible with LGA4677 server sockets
- Not compatible with standard consumer desktop sockets
Good fit if
- You run 4th or 5th Gen Intel processors on socket LGA4677.
- You need a compact heatsink built for 2U server rack chassis.
- You require thermal capacity rated up to 400W TDP.
Skip if
- You are building a standard desktop PC with consumer AM4, AM5, or LGA1700 sockets.
- You require a chassis clearance taller than standard 2U dimensions.
Verdict: MDWXDOFP 2U LGA4677 Server Cooler delivers high 400W TDP dissipation in a compact 2U form factor specifically tailored for LGA4677 server infrastructure. Its five-heatpipe array and high-speed PWM fan ensure sufficient airflow within narrow rackmount enclosures.
NICGQMQR 2U LGA4677 5-Heatpipe Server Cooler
Best for: 2U LGA4677 server deployments with high TDP
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA4677
- TDP Rating
- 400W
- System Type
- Server
- Server Height
- 2U
- Weight
- 1.76 ounces
View on Amazon: NICGQMQR 2U LGA4677 5-Heatpipe Server Cooler
This is a dedicated 2U server heatsink designed for LGA4677 4th and 5th generation processors. It packs 5 heat pipes alongside a high-speed PWM cooling fan to handle a 400W TDP rating. You can select versions with E1A or E1B bracket compatibility. Choose this if you run high-wattage server hardware inside a standard 2U chassis space.
Pros
- 5 heat pipes for thermal transfer
- Supports up to 400W TDP
- Designed for compact 2U server height
- High-speed PWM fan included
Cons
- Restricted to LGA4677 server sockets
- No desktop consumer socket hardware listed
Good fit if
- You need a 5-pipe cooler for a 2U rackmount server chassis.
- You run an LGA4677 processor requiring up to 400W TDP dissipation.
Skip if
- You use a standard desktop PC socket.
- You require a standard tower cooler for an ATX case.
Verdict: NICGQMQR 2U LGA4677 5-Heatpipe Server Cooler delivers 400W TDP dissipation for LGA4677 processors. It fits compact rackmount setups requiring dedicated 2U enterprise cooling.
Zalman Dual-Fan 5-Heatpipe Air Cooler
Best for: High-TDP builds needing cable-free dual fans
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA1851/1700/1200/115X, AM5/AM4
- Cooler Height
- 158mm
- Fan Size
- 120mm
- TDP Rating
- 220W
- Fan Speed
- 600 - 2,000 RPM
This Zalman unit is a dual-fan CPU air cooler built around a circular 53-fin heatsink and five pure copper heat pipes. It handles thermal loads up to 220W TDP using two 120mm PWM fans in a push-pull setup. Cable-free magnetic pogo-pin connectors link the fans and lighting directly to the body. It suits your build if you want high-wattage cooling on modern Intel or AMD platforms.
Pros
- Rated for CPUs up to 220W TDP
- Dual 120mm PWM push-pull fans with magnetic pogo-pin mounting
- Five pure copper heat pipes with Reverse Direct Touch technology
- Includes Zalman ZM-STC10 thermal compound
Cons
- Tall 158mm height requires checking case clearance
- Maximum fan airflow is limited to 44.48 CFM
- Heavy total weight of 970 grams (2.13 lbs)
Good fit if
- You need up to 220W TDP heat dissipation for AM5 or LGA1851 processors.
- You prefer magnetic, clip-free fan mounting without extra fan cables.
- You have at least 158mm of cooler clearance inside your PC case.
Skip if
- You use a compact or low-profile PC case under 158mm of cooler clearance.
- You require fan airflow higher than 44.48 CFM.
Verdict: Zalman Dual-Fan 5-Heatpipe Air Cooler provides 220W TDP thermal headroom via a circular 53-fin heatsink and dual push-pull fans. Its magnetic pogo-pin fan setup simplifies installation across compatible Intel and AMD sockets.
TKJBHGPK 2U LGA4677 5 Heat Pipe Server Cooler
Best for: 2U LGA4677 server builds needing 400W TDP
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA4677
- TDP Rating
- 400W
- System Type
- Server
- Server Height
- 2U
View on Amazon: TKJBHGPK 2U LGA4677 5 Heat Pipe Server Cooler
This is a silver 2U server heatsink designed for LGA4677 4th and 5th generation processors. It features five heat pipes, a high-speed PWM fan, and a thermal capacity rated at 400W TDP. Because it fits a standard 2U chassis profile, you can deploy it in high-density rackmount environments. It comes configured with an E1B bracket for specific enterprise motherboard mounting setups.
Pros
- High thermal capacity rated at 400W TDP
- Compact 2U server height profile
- Five heat pipes with high-speed PWM fan
- Includes LGA4677 E1B mounting bracket
Cons
- Limited to server LGA4677 sockets with no consumer CPU support
- Only offered in a silver finish
Good fit if
- You run a 4th or 5th generation LGA4677 processor in a 2U chassis.
- You require 400W TDP cooling capacity with five heat pipes.
- You need a heatsink that includes an E1B mounting bracket.
Skip if
- You use a standard desktop platform with consumer CPU sockets.
- You require an E1A bracket configuration instead of E1B.
Verdict: TKJBHGPK 2U LGA4677 5 Heat Pipe Server Cooler provides a high-density 400W thermal solution tailored for 2U enterprise systems. Its five heat pipes and high-speed PWM fan deliver dedicated cooling for demanding server workloads.
UBJFMAC 2U LGA4677 5-Heatpipe Server Cooler
Best for: 2U LGA4677 servers needing 400W cooling
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA4677
- TDP Rating
- 400W
- System Type
- Server
- Server Height
- 2U
This UBJFMAC server cooler is built for 2U rackmount enclosures running fourth- and fifth-generation LGA4677 processors. You get five heat pipes paired with a high-speed PWM cooling fan rated to handle thermal loads up to 400W TDP. This configuration includes an E1A bracket in silver. It suits your setup if you deploy high-density server hardware and need focused thermal headroom in compact chassis dimensions.
Pros
- Rated for up to 400W TDP thermal loads
- Equipped with five copper heat pipes
- Designed to clear 2U server chassis height constraints
- Includes high-speed PWM fan and E1A bracket
Cons
- Restricted to Intel LGA4677 server sockets
- Includes E1A bracket rather than universal socket hardware
Good fit if
- You run a 2U rackmount server with an LGA4677 CPU.
- You require up to 400W TDP cooling in a compact chassis.
- You need dedicated E1A bracket mounting hardware.
Skip if
- You build on desktop sockets such as AM5 or LGA1700.
- You require an E1B carrier bracket configuration.
Verdict: UBJFMAC 2U LGA4677 5-Heatpipe Server Cooler provides 400W TDP dissipation across five heat pipes for 2U enterprise systems. Its tailored E1A bracket design suits high-density fourth- and fifth-generation server deployments.
CTDOFUM 2U LGA4677 Server CPU Cooler
Best for: 2U server racks using LGA4677 processors
- Heat Pipes
- 5 Heat Pipes (what this guide is about)
- Socket Compatibility
- LGA4677
- TDP Rating
- 400W
- System Type
- Server
- Server Height
- 2U
- Dimensions
- 0.39 × 0.39 × 0.39 inches
The CTDOFUM 2U LGA4677 Server CPU Cooler is an enterprise heatsink built specifically for server rack installations. It features 5 heat pipes, a high-speed PWM fan, and support for up to 400W TDP. Engineered for 4th and 5th Generation LGA4677 processors, it fits inside standard 2U server enclosures. This cooler suits you if you maintain dense rack equipment and need high-power thermal management for compatible server hardware.
Pros
- 5 heat pipes for thermal dissipation
- Thermal design power rated up to 400W TDP
- Engineered for compact 2U server chassis
- High-speed PWM cooling fan included
Cons
- Restricted to Intel LGA4677 server sockets
- Incompatible with consumer desktop motherboard sockets
Good fit if
- You run 4th or 5th Gen Intel CPUs on an LGA4677 motherboard.
- You mount your server hardware inside a 2U rack enclosure.
- You need thermal support for high-power workloads up to 400W.
Skip if
- You build with standard desktop sockets such as AM5 or LGA1700.
- You use a tower case that does not require a 2U server form factor.
Verdict: CTDOFUM 2U LGA4677 Server CPU Cooler delivers 400W TDP cooling capacity across 5 heat pipes for enterprise LGA4677 platforms. It provides a targeted thermal solution when you deploy rackmount servers in 2U chassis.
Specifications side by side
| Spec | Vetroo V5 5 Heat Pipe CPU Cooler | ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler | Thermalright Dual Tower 5-Heatpipe CPU Cooler | Thermalright Assassin King 120 5-Heatpipe Cooler | Thermalright Assassin King 120 SE CPU Cooler | Thermalright Assassin King 120 SE White ARGB | Thermalright Assassin King 120 SE ARGB | ID-COOLING 57mm Low-Profile CPU Cooler | Thermalright Assassin King 120 Air Cooler | MDWXDOFP 2U LGA4677 Server Cooler | NICGQMQR 2U LGA4677 5-Heatpipe Server Cooler | Zalman Dual-Fan 5-Heatpipe Air Cooler | TKJBHGPK 2U LGA4677 5 Heat Pipe Server Cooler | UBJFMAC 2U LGA4677 5-Heatpipe Server Cooler | CTDOFUM 2U LGA4677 Server CPU Cooler |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 1851/1700/1200/1150, AM5/AM4 | not specified | AM4, AM5, LGA1150, LGA1200, LGA1700 | LGA 1700, 1851, 1200, AM4, AM5 | AM4, AM5, LGA 1700, 1200, 1150, 1151 | AM4, AM5, LGA 1700, 1851, 1200, 115X | AM4, AM5, LGA 1700, 1200, 1150, 1151 | not specified | AM4, AM5, Intel 1150/1151/1200/1700 | LGA4677 | LGA4677 | LGA1851/1700/1200/115X, AM5/AM4 | LGA4677 | LGA4677 | LGA4677 |
| Cooler Height | not specified | not specified | 160 mm | 148 mm | 148mm | 148mm | 148mm | 57mm | 148mm | not specified | not specified | 158mm | not specified | not specified | not specified |
| Heat Pipes | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Tower Design | not specified | not specified | Dual-Tower | Single-Tower | not specified | not specified | not specified | Low-Profile | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Fan Size | not specified | 120mm | 120 mm, 140 mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | not specified | not specified | 120mm | not specified | not specified | not specified |
| TDP Rating | not specified | not specified | 275 W | not specified | 235W | not specified | not specified | not specified | 235W | 400W | 400W | 220W | 400W | 400W | 400W |
| Fan Speed | 800-1700 RPM | not specified | 1850 RPM | 1550 RPM | not specified | 1550 RPM | 1550 RPM | not specified | 1550 RPM ± 10% | not specified | not specified | 600 - 2,000 RPM | not specified | not specified | not specified |
| Lighting | ARGB | not specified | not specified | not specified | not specified | ARGB | ARGB | not specified | not specified | not specified | not specified | ARGB | not specified | not specified | not specified |
| System Type | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Server | Server | not specified | Server | Server | Server |
| Color | Black | Black | Black | AK120SE | not specified | White | not specified | Black | AK120 SE | Silver | Silver | Black | Silver | Silver | Silver |
| Server Height | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 2U | 2U | not specified | 2U | 2U | 2U |
| Material | not specified | not specified | Aluminum | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Features | not specified | not specified | Fan | Fan | Fan | Fan | Fan | not specified | Fan | not specified | not specified | Fan | not specified | not specified | not specified |
| Dimensions | 5.83 × 5.04 × 2.95 inches | 5 × 4.25 × 5.9 inches | 6.3 × 5.75 × 5.51 inches | 5.83 × 4.92 × 2.87 inches | 4.72 × 2.8 × 5.83 inches | 5.83 × 4.92 × 2.87 inches | 4.72 × 2.87 × 5.83 inches | 2.17 × 9.06 × 4.72 inches | 4.92 × 2.87 × 5.83 inches | not specified | not specified | 5.12 × 4.61 × 6.22 inches | not specified | not specified | 0.39 × 0.39 × 0.39 inches |
| Weight | 1.68 pounds | not specified | 2.2 pounds | 1.4 pounds | 1.4 pounds | 1.4 pounds | 1.15 pounds | 15.9 ounces | not specified | 1.76 ounces | 1.76 ounces | 2.13 pounds | not specified | not specified | not specified |
| Size | V5 | not specified | 5 Heat Pipes | 4 Heatpies | AK120 SE | 5 Heat pies | AK120 SE ARGB | not specified | not specified | 4677-2UAF8 Cooler | 4677-2UAF8 Cooler | not specified | With E1B Bracket | With E1A Bracket | 4677-2UAF8 Cooler |
| Model | V5 | not specified | FC140 BLACK | AK120 SE | AK120 SE-d6 | AK120 SE WHITE ARGB-d2 | AK120 SE ARGB-d6 | IS-55 BLACK | AK120 SE | MDWXDOFP | NICGQMQR | ZET5 BLACK | not specified | not specified | CTDOFUM |
Is a 5 Heat Pipe Cooler Worth It?
A five-heatpipe layout increases direct heat transfer from the processor base into the aluminum cooling fins. Spec sheets indicate these coolers support thermal loads from 220W to 275W TDP on desktop platforms, while enterprise 2U models handle up to 400W TDP. This configuration utilizes 6mm or 8mm copper pipes across single-tower, dual-tower, and low-profile designs. In practice, choosing five heat pipes gives you sustained dissipation capacity for demanding compute tasks while preserving clearance around your memory modules and expansion slots.
Worth it if
- You operate desktop processors generating between 220W and 275W TDP under load.
- You deploy high-density 2U enterprise servers requiring up to 400W TDP heat dissipation.
Skip it if
- You run low-power CPUs that do not require multi-pipe copper thermal arrays.
- You use an enclosure that cannot accommodate tower heights between 148mm and 160mm.
How We Picked These Coolers
To choose the 15 coolers for this guide, we identify models where the listing title or feature list specifies five heat pipes. We display only one variant per product family. We do not physically handle or test the hardware. Every detail comes directly from published manufacturer specifications, including socket compatibility, cooler height, and fan airflow.
You will see products in stock first so you can review available models right away. We also evaluate published TDP figures and socket support specs against our guide criteria. Live stock and pricing update at least daily on the page.
How to Choose a Five-Heatpipe Cooler
-
Check Heat Pipe Diameter
Inspect the millimeter diameter of the five heat pipes on the specification sheet. Standard desktop models typically utilize 6mm pipes, which efficiently handle everyday computing workloads. Heavy-duty options such as the Thermalright Dual Tower 5-Heatpipe CPU Cooler feature thicker 8mm heat pipes. Thicker heat pipes contain more internal working fluid and wick structure to move heat away from higher-wattage processors. If you run sustained heavy computational loads, prioritize larger pipe diameters over standard 6mm arrays to ensure your thermal solution handles high heat output.
-
Measure Vertical Cooler Clearance
Check your computer case specifications for the maximum CPU cooler height allowance before buying. Tower coolers with five heat pipes vary significantly in height. The Thermalright Assassin King 120 Air Cooler stands at 148mm tall, making it suitable for moderate mid-tower enclosures. Larger towers can reach 160mm, which might collide with the tempered glass or side panel of narrower enclosures. Measure the exact space between your motherboard surface and the outer case edge to ensure the heatsink fins and top heat pipe caps clear comfortably.
-
Evaluate Memory Module Clearance
Examine the cooler footprint relative to your motherboard memory slots. Five-pipe coolers with dual fans or wider fin stacks can extend over your primary RAM channels, restricting tall heat spreaders. The ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler specifies zero RAM interference by offsetting its fin stack away from memory slots. If your system uses memory modules with tall integrated heatsinks, choose a model that specifically lists full RAM clearance or asymmetric heat pipe alignment. This design prevents you from having to raise the front intake fan.
-
Match Lighting Header Standards
Determine whether your motherboard provides standard lighting headers before selecting an illuminated cooler. Models like the Vetroo V5 5 Heat Pipe CPU Cooler utilize standard 5V 3-pin addressable RGB connections. These allow lighting control directly through native motherboard software rather than requiring proprietary external controller hardware. If your motherboard only features older 12V 4-pin RGB headers or lacks lighting headers entirely, addressable RGB fans will not function properly without an external adapter. Verify your board header voltage to ensure full lighting synchronization across your system components.
-
Consider Fan Connection Types
Review how the cooling fans connect to your motherboard and to each other. Dual-fan setups often require a Y-splitter cable to connect both fans to a single four-pin PWM CPU header. In contrast, the Zalman Dual-Fan 5-Heatpipe Air Cooler utilizes magnetic pogo-pin connectors between the fans, eliminating excess wiring within your chassis. If you want a clean interior layout with fewer cables running across the motherboard, look for unified connector systems. Otherwise, verify that your motherboard or power supply has enough headers for all included fans.
-
Identify Enterprise Carrier Brackets
Confirm carrier bracket compatibility when selecting five-pipe coolers for server applications. Server cooling designs rely on specific mechanical brackets rather than universal desktop backplates. For instance, the UBJFMAC 2U LGA4677 5-Heatpipe Server Cooler specifies an E1A bracket configuration tailored for particular enterprise processor socket carriers. Other server designs require E1B brackets depending on the CPU package type. Check your server motherboard and CPU carrier specifications carefully before purchasing. Matching the exact bracket code ensures proper mounting pressure and firm contact across high-density enterprise server sockets.
Frequently asked questions
Will a 5-heatpipe CPU cooler interfere with tall RAM modules?
Most 5-heatpipe coolers are designed to avoid blocking memory slots, but layout varies by model. For instance, the ID-COOLING Dual 120mm Fan cooler specifically provides zero RAM interference even with its dual-fan push-pull configuration. Single-tower options with slim profiles also leave adjacent DIMM slots accessible. You should always verify heatsink base offset specifications if your memory modules feature tall heat spreaders.
What is the advantage of direct-contact heat pipes on a CPU cooler?
Direct-contact heat pipes sit flush against the processor heat spreader without an intermediate metal baseplate. Coolers like the Vetroo V5 and ID-COOLING Dual 120mm use direct-access pipes to draw heat straight from the processor surface into the cooling array. This design reduces thermal resistance between the CPU and the pipe walls. It works well on mainstream processors where heat concentrates directly under the integrated heat spreader.
Can you fit a 5-heatpipe cooler into a compact Mini-ITX chassis?
Yes, you can install a 5-heatpipe cooler in small form factor cases if you choose a low-profile model. The ID-COOLING 57mm cooler features five heat pipes while maintaining an overall height of just 57mm. Standard tower designs, such as the Thermalright Assassin King models at 148mm, require mid-sized enclosures. Check your computer case specifications for maximum CPU cooler clearance before selecting between low-profile and tower formats.
Which motherboard connector do addressable RGB 5-heatpipe coolers require?
Addressable RGB models require a standard 5V 3-pin ARGB motherboard header for lighting control. The Vetroo V5 uses this 5V 3-pin connection to synchronize lighting directly through your motherboard software without requiring proprietary external control hubs. The Thermalright Assassin King 120 SE White ARGB also provides addressable lighting. Always ensure your motherboard includes a 3-pin 5V header rather than an incompatible 4-pin 12V RGB header before connecting the cable.
Which 5-heatpipe CPU coolers support Intel socket LGA 1851?
Several 5-heatpipe air coolers include mounting hardware for Intel LGA 1851. Models like the Thermalright Assassin King 120, Thermalright Assassin King 120 SE White ARGB, and Zalman Dual-Fan Air Cooler explicitly list LGA 1851 compatibility in their published specifications. Because bracket specifications vary across product revisions, you should verify that LGA 1851 is printed on the hardware list of the specific unit you plan to install.
How do dual fans improve performance on a 5-heatpipe air cooler?
Dual fans operate in a push-pull arrangement to increase airflow velocity through the heatsink fins. The ID-COOLING Dual 120mm cooler and the Zalman Dual-Fan cooler use two fans to push intake air and pull exhaust simultaneously. The Zalman model also uses magnetic pogo-pin fan connections to eliminate loose fan wires. This dual-fan structure helps lower fin-stack heat retention under sustained workloads without adding extra heat pipes.
What airflow volume should you expect from a 120mm 5-heatpipe cooler fan?
Standard 120mm fans included with single-tower 5-heatpipe coolers deliver around 66 CFM of airflow. For example, the Thermalright Assassin King 120 and Assassin King 120 SE White ARGB both list an airflow rating of 66.17 CFM with their PWM fans. This airflow volume provides balanced static pressure to drive cool air past the five copper pipes and aluminum cooling fins under standard operating loads.