15 Best CPU Coolers for LGA 1150, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best CPU coolers for LGA 1150 requires matching your case dimensions to the cooler’s physical specs. We compared 15 options using only the data published on each listing. The Thermaltake Gravity i2 92mm leads because its 3.7-inch height fits tight spaces while providing PWM fan control. This guide helps you decide which cooler matches your build’s clearance and thermal needs.
Our top pick: Thermaltake Gravity i2 92mm CPU Cooler.
Quick picks
The best fit for you
- You need the best overall compact LGA 1150 cooler Thermaltake Gravity i2 92mm CPU Cooler Its 3.7-inch height and PWM fan control fit standard compact cases.
- You need the thinnest cooler for a 1U chassis HIGH Power 80mm 1U LGA 1150 Cooler The 1.06-inch height fits strict 1U height limits for low TDP CPUs.
- You need the absolute lowest profile for ultra-compact ITX Thermalright AXP90 36mm Low-Profile Cooler The 36mm height with four heatpipes fits in the tightest vertical spaces.
- You need high cooling power in a wide case Thermalright Dual Tower 5-Heatpipe CPU Cooler Five 8mm heat pipes and dual fans handle 275W TDP loads.
Our 15 picks
Thermaltake Gravity i2 92mm CPU Cooler
Best for: compact Intel LGA 1150 stock cooler replacements
- Socket Compatibility
- LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Tower Design
- Low-profile
- Fan Size
- 92mm
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.7 × 2.4 × 3.7 inches
View on Amazon: Thermaltake Gravity i2 92mm CPU Cooler Affiliate link
The Thermaltake Gravity i2 92mm CPU Cooler provides basic top-flow cooling for your Intel LGA 1150 setup. It features an aluminum extrusion heatsink paired with a seven-bladed 92mm fan. A four-pin PWM connector allows your motherboard to regulate fan speeds according to CPU demand. With a compact footprint measuring 3.7 inches long and 2.4 inches wide, you get a direct drop-in replacement suited for standard LGA 1150 desktop processors.
Pros
- 4-pin PWM connector for motherboard speed control
- Compact 3.7-inch by 2.4-inch footprint
- 7-bladed 92mm fan design
- Direct fit for LGA 1150, 1151, 1155, 1156, and 1200 sockets
Cons
- Solid aluminum extrusion without copper heat pipes
- Lacks mounting hardware for AMD sockets
Good fit if
- You need a compact replacement cooler for an Intel LGA 1150 socket.
- You want 4-pin PWM motherboard control over fan speeds.
Skip if
- You need heat pipes for higher thermal dissipation.
- You run an AMD processor configuration.
Verdict: Thermaltake Gravity i2 92mm CPU Cooler delivers an aluminum top-down heatsink with PWM fan control for Intel LGA 1150 builds. It fits compact chassis spaces where basic thermal management is required.
StarTech 95mm Aluminum CPU Cooler
Best for: Standard LGA 1150 desktop builds
- Socket Compatibility
- LGA 1200, LGA 1150, LGA 1151, LGA 1156 (what this guide is about)
- Fan Size
- 95mm
- Features
- Fan
- Dimensions
- 3.94 × 3.94 × 3.39 inches
- Weight
- 9.67 ounces
View on Amazon: StarTech 95mm Aluminum CPU Cooler Affiliate link
This StarTech cooler uses a 95mm fan with an aluminum heatsink and PWM control. It fits LGA 1150 and older sockets. The unit measures 3.94 by 3.39 inches and weighs 9.67 ounces. You get reliable airflow for standard desktop builds. The Ever Lubricate bearing supports steady operation. It is a straightforward air cooling solution for compatible Intel platforms.
Pros
- 95mm fan size provides solid airflow
- 4-pin PWM connector for speed control
- Aluminum heatsink construction for heat dissipation
- Compatible with LGA 1150 and LGA 1151
Cons
- 9.67 ounces weight is heavier than many low-profile alternatives
- 3.39 inches height limits clearance in compact cases
- Aluminum heatsink offers less thermal mass than copper
Good fit if
- You need a standard tower cooler for LGA 1150
- You prefer PWM fan speed control
- You have standard ATX case dimensions
Skip if
- You require a low-profile build under 3 inches
- You need copper heat pipes for maximum cooling
- You are using a case with tight RAM clearance
Verdict: StarTech 95mm LGA 1150 CPU Cooler suits users needing a standard height air cooler for LGA 1150 systems. It fits well in cases that can accommodate its 3.39-inch height and 9.67-ounce weight.
SilverStone 80mm Low-Profile CPU Cooler
Best for: ultra-slim LGA 1150 and 1156 enclosures
- Socket Compatibility
- LGA 1150, LGA 1156 (what this guide is about)
- Cooler Height
- 23mm
- Tower Design
- Low Profile
- Fan Size
- 80mm
- Dimensions
- 4 × 4 × 3 inches
- Weight
- 8 ounces
View on Amazon: SilverStone 80mm Low-Profile CPU Cooler Affiliate link
This SilverStone unit is an ultra-compact air cooler built for Intel LGA 1150, LGA 1155, and LGA 1156 sockets. It stands 23mm tall, making it suitable if you work inside extremely space-restricted enclosures. The cooler pairs a copper center and base with extruded aluminum fins. Its custom 80mm PWM fan generates 28.1 CFM of airflow at a 26.0 decibel noise rating, giving you targeted cooling in low-profile desktop builds.
Pros
- Vertical clearance height of 23mm
- Copper center and base with extruded aluminum fins
- PWM-controlled 80mm fan with 26.0 dB noise rating
- Lightweight construction at 0.5 pounds
Cons
- Airflow output tops out at 28.1 CFM
- Uses an 80mm fan rather than a larger 92mm or 120mm size
- Socket support limited to Intel LGA 1156, LGA 1155, and LGA 1150
Good fit if
- You need a cooler under 25mm tall for an ultra-slim chassis.
- You use an Intel LGA 1150 or LGA 1156 motherboard.
- You want automated fan speed regulation via PWM control.
Skip if
- You require airflow rates higher than 28.1 CFM.
- You need mounting hardware for sockets outside the Intel LGA 115X family.
Verdict: SilverStone 80mm Low-Profile CPU Cooler provides a 23mm total height and copper-base thermal transfer for tight LGA 1150 and LGA 1156 builds. It is a dedicated solution when vertical clearance prevents the use of standard air coolers.
SilverStone AR06 58mm Low-Profile CPU Cooler
Best for: LGA 1150/1155 low profile builds
- Socket Compatibility
- LGA 1150, LGA 1155 (what this guide is about)
- Cooler Height
- 58 mm
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- TDP Rating
- 95W
- Features
- Fan
View on Amazon: SilverStone AR06 58mm Low-Profile CPU Cooler Affiliate link
The SilverStone Tek AR06 is a 58 mm tall CPU cooler designed for compact cases. It uses four 6 mm heat pipes with direct contact technology and an aluminum fin stack. The included 92 mm PWM fan delivers 40.2 CFM of airflow at 28.3 decibels. It supports Intel LGA 1150 and LGA 1155 sockets for CPUs up to 95W. You should choose this if you need low height and reliable passive heat transfer.
Pros
- 58 mm low profile height fits small cases
- Four 6 mm heat pipes with direct contact
- 92 mm PWM fan with 40.2 CFM airflow
- Compatible with Intel LGA 1150 and 1155
Cons
- 92 mm fan size is smaller than standard 120 mm units
- Single tower design limits cooling capacity for high TDP CPUs
- 58 mm height may interfere with tall RAM modules
Good fit if
- You have a case with strict CPU cooler height limits
- You use an Intel LGA 1150 or 1155 processor
- You prioritize low noise over maximum cooling performance
Skip if
- You need to cool a CPU exceeding 95W TDP
- You require dual tower performance for overclocking
- Your RAM clearance is less than 58 mm
Verdict: SilverStone Tek AR06 58mm Low-Profile Cooler is a practical solution for small form factor builds using LGA 1150 or 1155 sockets. It fits users who need a low profile without sacrificing basic heat pipe efficiency.
TRONSTORE TS1 92mm CPU Cooler
Best for: Small cases with LGA 1150 sockets
- Socket Compatibility
- LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Fan Size
- 92mm
- System Type
- Desktop
- Material
- Copper, Aluminum
- Features
- Fan
- Dimensions
- 3.62 × 3.62 × 2.2 inches
View on Amazon: TRONSTORE TS1 92mm CPU Cooler Affiliate link
The TRONSTORE TS1 is a low-profile air cooler designed for Intel desktops. It uses a copper core base with an aluminum heatsink to move heat. The 92mm fan connects via a 4-pin PWM interface for speed control. It fits sockets like LGA 1150 and LGA 1200. The unit stands 2.2 inches tall and weighs 5.6 ounces. It includes pre-applied thermal paste for easy installation.
Pros
- Copper core base with aluminum fins
- 92mm 4-pin PWM fan included
- Supports LGA 1150 and LGA 1200
- Pre-applied thermal paste
- Low 2.2-inch profile
Cons
- Smaller 92mm fan limits airflow compared to 120mm models
- Aluminum heatsink conducts heat less efficiently than full copper
- Single tower design offers less cooling capacity than dual tower units
Good fit if
- You need a cooler under 2.2 inches tall
- You use an Intel LGA 1150 socket
- You have limited case height clearance
Skip if
- You require high-end cooling for overclocked CPUs
- You prefer 120mm or 140mm fan sizes
- You have a full-tower case with ample space
Verdict: The TRONSTORE TS1 92mm Low-Profile CPU Cooler fits users who need a compact, budget-friendly solution for LGA 1150 systems with tight clearance. It provides basic cooling performance suitable for standard desktop use.
HIGH Power 80mm 1U LGA 1150 Cooler
Best for: 1U Mini ITX builds under 85W
- Socket Compatibility
- LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 27.3mm
- Tower Design
- Low-Profile
- Fan Size
- 80mm
- TDP Rating
- 85W
- Fan Speed
- 3000 RPM
View on Amazon: HIGH Power 80mm 1U LGA 1150 Cooler Affiliate link
This 1U low-profile air cooler is built for Mini ITX systems using LGA 1150 sockets. It features a 27.3mm height and an 80mm fan with a 1000-3000 RPM range. The aluminum heatsink handles up to 85W TDP. Factory-applied thermal paste simplifies installation. It supports backward compatibility with 3-pin headers, making it a compact solution for small form factor builds.
Pros
- Ultra-low 27.3mm profile height
- Supports LGA 1150 and 1151 sockets
- Handles 85W TDP
- Factory-applied thermal paste
- Backward compatible with 3-pin headers
Cons
- Smaller 80mm fan limits airflow compared to 92mm or 120mm options
- 85W TDP rating is lower than standard tower coolers
- 1U height restricts case compatibility
Good fit if
- You are building a Mini ITX system
- You need a 1U low-profile cooler
- Your CPU TDP is 85W or less
Skip if
- You require high airflow for overclocking
- You have a standard ATX case
- Your CPU exceeds 85W TDP
Verdict: HIGH Power 80mm 1U LGA 1150 Cooler fits users with strict height limits and low TDP CPUs. It is a specialized tool for compact builds, not a general-purpose high-performance solution.
JIUWU 92mm 4-Heatpipe Blue LED Cooler
Best for: Small cases with LGA 1150 CPUs
- Socket Compatibility
- LGA 1150, LGA 1151, LGA 775 (what this guide is about)
- Heat Pipes
- 4
- Fan Size
- 92mm
- Fan Speed
- 1800 RPM
- Lighting
- Blue LED
- System Type
- Desktop
View on Amazon: JIUWU 92mm 4-Heatpipe Blue LED Cooler Affiliate link
This JIUWU air cooler uses four direct-contact heat pipes to move heat from the CPU to the fins. It includes a 92mm fan that spins up to 1800 RPM. The unit measures 1.02 inches in height, making it suitable for smaller cases. It supports Intel LGA 1150 sockets. You get blue LED lighting and a hydraulic bearing for steady operation. It fits well if you need a standard tower cooler for an LGA 1150 system.
Pros
- Four heat pipes with direct contact technology
- 92mm fan reaches 1800 RPM for high airflow
- Low profile at 1.02 inches in height
- Supports LGA 1150 socket directly
- Blue LED lighting included
Cons
- 92mm fan size is smaller than the 120mm or 140mm fans on other list items
- Single tower design with four pipes offers less cooling capacity than dual-tower competitors
- 1800 RPM max speed may generate more noise than slower fans on other coolers
Good fit if
- You need a cooler that fits in a case with limited height clearance
- You want a budget-friendly option with direct contact heat pipes
- You are building on an LGA 1150 platform
Skip if
- You require a dual-tower cooler for high-end CPUs
- You prefer 120mm or larger fans for quieter operation
- You need RGB lighting instead of blue LEDs
Verdict: JIUWU 92mm CPU Cooler with 4 Heat Pipes is a compact solution for LGA 1150 builds that need a low-profile tower. It suits users who prioritize height clearance over maximum cooling performance.
Toptekits Copper Core Low-Profile Cooler
Best for: ultra-compact 1U and HTPC builds
- Socket Compatibility
- LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 27mm
- Tower Design
- Low-Profile
- Fan Size
- 80mm
- Fan Speed
- 2700 RPM ± 10%
- Material
- Copper
View on Amazon: Toptekits Copper Core Low-Profile Cooler Affiliate link
This Toptekits unit is a low-profile air cooler designed for Intel LGA 1150 sockets and compact systems. It features a copper core heatsink measuring 90 by 17 mm paired with an 80 mm slim fan. At 27 mm in total height, it clears restrictive enclosures like 1U server racks and HTPC cases. Running at 2700 RPM via a 3-pin connector, it suits your ultra-compact desktop builds.
Pros
- Low 27 mm total height fits 1U server chassis and slim HTPC enclosures
- Copper core heatsink construction for direct thermal conductivity
- Pre-pasted thermal compound included from the factory
- Compact 80 mm fan rated at 23±3 dBA noise level
Cons
- Uses a 3-pin power connector without 4-pin PWM speed regulation
- Fixed 2700 RPM fan speed runs faster than standard desktop fans
Good fit if
- You build in an ultra-slim chassis or 1U server needing 27 mm clearance.
- You want pre-applied thermal paste for a direct LGA 1150 installation.
Skip if
- You need a 4-pin PWM header for motherboard-controlled fan curves.
- You have clearance for larger 92 mm or 120 mm tower coolers.
Verdict: Toptekits Copper Core Low-Profile Cooler delivers a compact 27 mm profile and copper core heatsink for space-constrained LGA 1150 setups. It serves slim enclosures well if you do not require 4-pin PWM fan control.
JIUWU 92mm Air CPU Cooler
Best for: Quiet LGA 1150 builds with space constraints
- Socket Compatibility
- LGA 1150, LGA 1151, LGA 775 (what this guide is about)
- Heat Pipes
- 4
- Fan Size
- 92mm
- Features
- Fan
- Dimensions
- 0.98 × 4.88 × 3.11 inches
View on Amazon: JIUWU 92mm Air CPU Cooler Affiliate link
This JIUWU air cooler uses four continuous direct contact heat pipes to transfer heat from the CPU to the aluminum fins. It includes a 92mm fan that operates at a low 18dB(A) while moving a large volume of air. The unit supports LGA 1150 and fits sockets like LGA 775 and 1155. You get a straightforward cooling solution with an optimized bracket for easy installation without moving your motherboard.
Pros
- Four continuous direct contact heat pipes for efficient heat transfer
- 92mm fan delivers high air volume at 18dB(A) noise level
- Supports LGA 1150, LGA 1151, and LGA 775 sockets
- Optimized bracket allows installation without moving the motherboard
Cons
- 92mm fan size is smaller than the 120mm or 140mm fans on other list items
- Single tower design with four heat pipes offers less cooling capacity than dual-tower competitors
- Aluminum heatsink material conducts heat less effectively than the copper core bases found on other options
Good fit if
- You need a cooler that supports LGA 1150 and older sockets like LGA 775
- You prefer a quiet operation with a noise level around 18dB(A)
- You want an easy installation process that does not require removing the motherboard
Skip if
- You require a dual-tower design for maximum cooling performance
- You need a larger 120mm or 140mm fan for better airflow
- You prefer a copper core base for superior heat conductivity
Verdict: JIUWU 92mm 4-Heatpipe CPU Cooler is a compact option for users who prioritize quiet operation and easy installation on LGA 1150 systems. It suits those who do not need the heavy cooling power of larger dual-tower coolers.
TRONWIRE TW-2 Low Profile Cooler
Best for: Low-profile LGA 1150 builds with limited height
- Socket Compatibility
- LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 2.2 inches
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 3000 RPM
- System Type
- Desktop
View on Amazon: TRONWIRE TW-2 Low Profile Cooler Affiliate link
The TRONWIRE TW-2 is a low-profile air cooler designed for Intel LGA 1150 systems. It features an aluminum heatsink with a copper core base and a 92mm fan running up to 3000 RPM. The unit measures 2.2 inches in height, fitting into tight cases. It includes pre-applied thermal paste and uses a 4-pin PWM connector for speed control. This cooler suits users needing compact cooling for standard desktop builds.
Pros
- Copper core base for efficient heat transfer
- 92mm fan reaches 3000 RPM for strong airflow
- 2.2-inch height fits low-profile cases
- Pre-applied thermal paste simplifies installation
- 4-pin PWM support for variable fan speeds
Cons
- Single 92mm fan limits cooling capacity compared to dual-tower designs
- No visible heat pipe count listed in specifications
- Aluminum fins may offer less thermal mass than all-copper solutions
Good fit if
- You are building in a case with low RAM clearance
- You need a compact cooler for an LGA 1150 motherboard
- You want a simple plug-and-play setup with pre-applied paste
Skip if
- You require high-end cooling for overclocked processors
- You prefer larger 120mm or 140mm fans for quieter operation
- You need a cooler with visible heat pipes for easier maintenance
Verdict: The TRONWIRE TW-2 Low Profile CPU Cooler provides adequate cooling for standard LGA 1150 processors in space-constrained builds. It fits users who prioritize case compatibility and easy installation over maximum thermal performance.
Thermalright 53mm Low Profile ITX CPU Cooler
Best for: ITX builds with limited CPU cooler height
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 2700 RPM
View on Amazon: Thermalright 53mm Low Profile ITX CPU Cooler Affiliate link
This low-profile air cooler stands 53mm tall, making it suitable for small ITX cases. It uses four 6mm copper heat pipes with AGHP technology to manage heat effectively. The included 92mm TL-9015 fan runs at 2700 RPM and provides 42.58 CFM of airflow. It supports LGA 1150 and other Intel sockets, fitting well in compact builds where space is limited.
Pros
- 53mm total height fits tight cases
- 4 pure copper heat pipes with AGHP tech
- 92mm PWM fan reaches 2700 RPM
- Supports LGA 1150 and modern sockets
Cons
- 53mm height is taller than the 36mm AXP90 X36 option
- 92mm fan size is larger than the 80mm fans on other low-profile coolers
- Single tower design has fewer heat pipes than dual tower alternatives
Good fit if
- You need a cooler under 60mm for an ITX case
- You use an Intel LGA 1150 socket
- You want copper heat pipes for better conductivity
Skip if
- You require a cooler shorter than 53mm
- You need a dual-tower design for high TDP CPUs
- You prefer an 80mm fan for minimal noise
Verdict: Thermalright AXP90-X53 Low Profile Cooler offers solid cooling for LGA 1150 in small ITX cases. It suits users who need a reliable copper-based solution that fits under 60mm.
Thermalright 47mm Low-Profile CPU Cooler
Best for: compact ITX builds with strict clearance limits
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright 47mm Low-Profile CPU Cooler Affiliate link
This Thermalright cooler is a compact low-profile option designed for space-constrained ITX systems. It stands 47mm tall and mounts directly to your LGA 1150 motherboard using an all-metal backplate fastener. Four 6mm heatpipes transfer heat through secondary reflow soldering, paired with a slim 92mm PWM fan rated at 22.4 dBA or lower. It suits you if you need reliable cooling inside a small form factor enclosure.
Pros
- Compact 47mm total height fits tight ITX enclosures
- Four 6mm heatpipes with secondary reflow soldering
- Low maximum fan noise rating of 22.4 dBA
- All-metal mounting hardware with backplate fastener
Cons
- Uses a smaller 92mm slim fan instead of a full-size 120mm fan
- Smaller heatsink surface area than standard tower coolers
Good fit if
- You build in a small form factor case with tight vertical clearance.
- You want quiet operation with sound levels rated at or below 22.4 dBA.
Skip if
- You have adequate space for a full-size 120mm tower heatsink.
- You require integrated RGB lighting elements on your cooler.
Verdict: Thermalright 47mm Low-Profile CPU Cooler delivers quiet, compact cooling for LGA 1150 processors in slim ITX cases. Its 47mm profile and four heatpipes handle thermal loads where standard tower coolers cannot fit.
Thermalright AXP90 36mm Low-Profile Cooler
Best for: Ultra-compact ITX builds needing LGA 1150 support
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- System Type
- ITX
- Features
- Fan
View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler Affiliate link
Thermalright designed this low-profile cooler for compact ITX builds using LGA 1150 motherboards. At 36mm in total height, it clears tight spaces where standard coolers cannot fit. You get four 6mm heatpipes, a nickel-plated finish, and a slim 92mm PWM fan rated at 22.4 dBA or lower. It suits you if you need quiet cooling inside an ultra-small PC chassis.
Pros
- Total height measures 36mm for small-form-factor clearance
- Four 6mm AGHP heatpipes with nickel-plated finish
- TL-9015 slim PWM fan operates at 22.4 dBA or quieter
- Includes metal backplate mounting hardware
Cons
- Smaller heatsink area than full-size tower coolers
- Uses a 92mm slim fan rather than a standard 120mm fan
Good fit if
- You build inside an ITX case with strict clearance limits.
- You want a low-profile cooler with four dedicated 6mm heatpipes.
- You need LGA 1150 socket compatibility with a metal backplate.
Skip if
- You have space for a 120mm tower cooler.
- You prefer integrated RGB lighting on your cooler.
Verdict: Thermalright 36mm Low-Profile CPU Cooler delivers four heatpipes and a slim PWM fan inside a 36mm profile. It gives your compact LGA 1150 system solid cooling without vertical clearance issues.
Thermalright 53mm Low-Profile CPU Cooler
Best for: compact LGA 1150 Mini-ITX builds
- Socket Compatibility
- AM4, LGA 1851, LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 90mm
- Color
- Black
View on Amazon: Thermalright 53mm Low-Profile CPU Cooler Affiliate link
This Thermalright cooler is a compact heatsink designed for small enclosures. It fits your LGA 1150 socket using an all-metal backplate mounting system. The unit stands 53mm tall and uses four 6mm heat pipes paired with a 90mm PWM slim fan rated at 22.4 dBA maximum noise. It suits you if you need reliable processor cooling inside a tight Mini-ITX or low-clearance chassis.
Pros
- Compact 53mm total height fits small form factor cases
- Four 6mm heat pipes with secondary reflow soldering
- Low-noise 90mm PWM fan rated at 22.4 dBA or less
- All-metal mounting hardware with backplate fastener
Cons
- Smaller 90mm fan surface area than standard 120mm designs
- No integrated RGB lighting features
Good fit if
- You have a small case requiring a cooler height under 55mm.
- You want an all-metal backplate mounting setup on LGA 1150.
- You prioritize quiet operation with noise levels at or below 22.4 dBA.
Skip if
- You have space in your case for a full-size 120mm tower cooler.
- You want integrated RGB lighting effects on your heatsink fan.
Verdict: Thermalright 53mm Low-Profile CPU Cooler delivers four-heatpipe cooling and quiet operation in a tight 53mm form factor. It gives your LGA 1150 processor solid thermal management when case clearance is strictly limited.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
Best for: high-wattage LGA 1150 builds with wide cases
- Socket Compatibility
- AM4, AM5, LGA 1200, LGA 1150, LGA 1151 (what this guide is about)
- Cooler Height
- 160 mm
- Heat Pipes
- 5
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm, 140 mm
- TDP Rating
- 275 W
View on Amazon: Thermalright Dual Tower 5-Heatpipe CPU Cooler Affiliate link
This dual-tower aluminum cooler features five 8mm heat pipes and supports Intel LGA 1150 sockets with a 275W TDP rating. It uses two PWM fans—one 120mm and one 140mm—delivering up to 95.5 CFM of airflow at 30.2 dB(A). Standing 160mm tall, it provides clearance for memory modules up to 62mm. It suits you if you need heavy-duty cooling capacity for demanding LGA 1150 builds.
Pros
- Rated for up to 275W TDP cooling capacity
- Five 8mm heat pipes with AGHP technology
- Includes two PWM fans with airflow up to 95.5 CFM
- Supports memory modules up to 62mm in height
Cons
- Tall 160mm height requires a wide PC chassis
- No integrated RGB or LED lighting
Good fit if
- You have a PC chassis wider than 210mm to clear the 160mm height.
- You run high-wattage LGA 1150 workloads needing up to 275W TDP capacity.
- You use tall memory modules up to 62mm in height.
Skip if
- You build inside a compact or slim low-profile case.
- You want integrated ARGB or LED lighting on the fans.
Verdict: Thermalright Dual Tower CPU Air Cooler delivers 275W TDP dissipation via five 8mm heat pipes and dual PWM fans. It is a solid choice when your LGA 1150 system has the chassis depth to house a 160mm heatsink.
Specifications side by side
| Spec | Thermaltake Gravity i2 92mm CPU Cooler | StarTech 95mm Aluminum CPU Cooler | SilverStone 80mm Low-Profile CPU Cooler | SilverStone AR06 58mm Low-Profile CPU Cooler | TRONSTORE TS1 92mm CPU Cooler | HIGH Power 80mm 1U LGA 1150 Cooler | JIUWU 92mm 4-Heatpipe Blue LED Cooler | Toptekits Copper Core Low-Profile Cooler | JIUWU 92mm Air CPU Cooler | TRONWIRE TW-2 Low Profile Cooler | Thermalright 53mm Low Profile ITX CPU Cooler | Thermalright 47mm Low-Profile CPU Cooler | Thermalright AXP90 36mm Low-Profile Cooler | Thermalright 53mm Low-Profile CPU Cooler | Thermalright Dual Tower 5-Heatpipe CPU Cooler |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 1200/1156/1155/1150/1151 | LGA1156/1155/1150/1151/1200 | LGA 1156/1155/1150 | not stated | Socket 1200, 1151, 1150, 1155, 1156 | LGA 1156/1155/1151/1150/1200 | LGA 775, 1150/1151/1155/1156, AM4 | LGA 1150/1151/1155/1156 | LGA 775 1150 1155 1151 1156 | LGA 1200, 1151, 1150, 1155, 1156 | AM4, AM5, LGA1150/1151/1200/1700/1851 | AM4, AM5, LGA115x/1200/1700/1851 | AM4, AM5, LGA1150/1151/1200/1700/1851 | AM4, AM5, LGA115x, LGA1200, LGA1851 | AM4, AM5, LGA1150, LGA1200, LGA1700 |
| Cooler Height | not stated | not stated | 23mm | 58 mm | not stated | 27.3mm | not stated | 27mm | not stated | 2.2 inches | 53mm | 47mm | 36mm | 53mm | 160 mm |
| Heat Pipes | not stated | not stated | not stated | not stated | not stated | not stated | 4 | not stated | 4 | not stated | 4 | 4 | 4 | 4 | 5 |
| Tower Design | Low-profile | not stated | Low Profile | Low-Profile | not stated | Low-Profile | not stated | Low-Profile | not stated | Low-Profile | Low-Profile | Low-Profile | Low-Profile | Low-Profile | Dual-Tower |
| Fan Size | 92mm | 95mm | 80mm | 92mm | 92mm | 80mm | 92mm | 80mm | 92mm | 92mm | 92mm | 92mm | not stated | 90mm | 120 mm, 140 mm |
| TDP Rating | not stated | not stated | not stated | 95W | not stated | 85W | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 275 W |
| Fan Speed | not stated | not stated | not stated | not stated | not stated | 3000 RPM | 1800 RPM | 2700 RPM ± 10% | not stated | 3000 RPM | 2700 RPM | not stated | not stated | not stated | 1850 RPM |
| Lighting | not stated | not stated | not stated | not stated | not stated | not stated | Blue LED | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| System Type | not stated | not stated | not stated | not stated | Desktop | ITX | Desktop | not stated | not stated | Desktop | ITX | ITX | ITX | not stated | not stated |
| Color | Black | Black | NT07-115X | AR06 - 58mm tall | not stated | Black Orange | not stated | H116 | not stated | not stated | AXP90 X53 | Black | AXP90-X36 | Black | Black |
| Server Height | not stated | not stated | not stated | not stated | not stated | 1U | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Material | Aluminum | not stated | not stated | not stated | Copper, Aluminum | not stated | not stated | Copper | not stated | Copper, Aluminum | not stated | not stated | not stated | not stated | Aluminum |
| Features | Fan | Fan | not stated | Fan | Fan | not stated | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 3.7 × 2.4 × 3.7 inches | 3.94 × 3.94 × 3.39 inches | 4 × 4 × 3 inches | 6.5 × 5.5 × 2.5 inches | 3.62 × 3.62 × 2.2 inches | 3.62 × 3.62 × 1.06 inches | 3.9 × 3.62 × 1.02 inches | 3.94 × 3.94 × 1.77 inches | 0.98 × 4.88 × 3.11 inches | 3.62 × 3.62 × 2.2 inches | 3.72 × 3.74 × 2.09 inches | 3.74 × 3.74 × 1.26 inches | 3.74 × 3.7 × 0.83 inches | 3.7 × 3.74 × 1.5 inches | 6.3 × 5.75 × 5.51 inches |
| Weight | 11 ounces | 9.67 ounces | 8 ounces | 1 pounds | 5.6 ounces | 6 ounces | not stated | 7.76 ounces | not stated | not stated | 1.1 pounds | 1.1 pounds | 14.4 ounces | 1 pounds | 2.2 pounds |
| Size | Intel | 95mm | not stated | 0 | not stated | not stated | not stated | H116 | not stated | not stated | 53mm | Height 47mm | Height 36mm | Height 53mm | 5 Heat Pipes |
| Model | CLP0556-B | FAN1156PWM | NT07-115X | AR06 | TS1 | LGA-115x-mITX | DNFS004 | H116 | DNFS005 | not stated | AXP90 X53 | AXP90 X47 BLACK | AXP90 X36 | AXP90 X53 BLACK | FC140 BLACK |
Is LGA 1150 Socket Compatibility Worth It?
LGA 1150 socket compatibility provides exact mounting alignment for Intel LGA 1150 motherboards. This specification guarantees heatsink brackets match board mounting holes for secure processor contact. In daily use, proper socket support prevents improper thermal contact. Many coolers on this list pair LGA 1150 support with modern sockets like AM4, AM5, LGA 1200, LGA 1700, and LGA 1851. That multi-socket capability lets you migrate the same cooler to newer desktop platforms later. Other units combine LGA 1150 support with older sockets like LGA 775 and LGA 1156.
Worth it if
- You mount a cooler directly onto an Intel LGA 1150 desktop motherboard.
- You want hardware that also migrates to sockets like AM4, AM5, LGA 1700, or LGA 1851.
Skip it if
- You use a motherboard that does not match LGA 1150, LGA 1200, LGA 1700, AM4, or AM5 mounting points.
- You already have a working cooler installed on your LGA 1150 socket.
If you need lower socket clearance or radiator mounting, you can examine an aio liquid cooler for LGA 1150 for your build.
How We Picked These Coolers
To find the best options for your build, we evaluated listings that explicitly state LGA 1150 socket compatibility in their titles or feature lists. Each cooler on this list includes published support for the LGA 1150 platform to ensure a proper fit on your motherboard. All details come directly from the specifications and feature lists published on the listings, and products are not physically handled. We also show only one size or variant of each product family to maintain variety.
The 15 coolers are arranged with products in stock first. This allows you to identify available options that match your case dimensions, whether you require a compact low-profile heatsink or a dual-tower model.
Choosing the Right LGA 1150 Cooler
-
Count the Heat Pipes
Heat pipes pull heat away from your processor and spread it into the fin stack. You should check the heat pipe count on the specification sheet before choosing a heatsink. Basic coolers rely entirely on solid metal blocks, while advanced units use four to six heat pipes to boost thermal conduction. For high thermal loads, pick a heatsink with five or six pipes. The Thermalright Dual Tower 5-Heatpipe CPU Cooler features five 8mm heat pipes to manage up to 275W TDP processors. Fewer pipes suit lower-power desktop tasks.
-
Evaluate Fan Dimensions
Fan diameter directly determines how much air passes through the cooling fins at a given speed. Coolers on this list use 80mm, 92mm, or 120mm fans. Larger 120mm fans generate airflow with lower rotational speed, while compact 80mm and 92mm fans fit into narrow desktop footprints. Check the manufacturer airflow ratings to verify thermal throughput. For example, the Thermaltake Gravity i2 92mm Intel CPU Cooler outputs 31.343 CFM of airflow to cool 95W processors. Choose smaller fans for restricted motherboard layouts and 120mm fans when you want higher airflow volume.
-
Compare Heatsink Base Materials
Thermal conductivity depends heavily on the metal contacting your processor lid. Aluminum heatsinks keep overall unit weight low and handle moderate thermal dissipation reliably. Copper provides faster thermal absorption directly at the contact point. You should check the material specifications when selecting a heatsink for compact cases where metal mass is limited. The Toptekits Copper Core Low-Profile Cooler uses a copper core heatsink to draw heat quickly away from the socket area. Choose solid aluminum for basic lightweight setups, or pick copper when you need denser thermal conductivity in small form factors.
-
Select Tower Layout Architecture
The structural layout of a heatsink impacts fin surface area and clearance around motherboard memory slots. Single-tower designs use a single fin array and one fan, reducing width and leaving room near memory modules. Dual-tower coolers split heat across two separate fin arrays and can support dual fans for maximum heat dissipation. The Thermalright Burst Assassin 120 ARGB features a single-tower design that fits standard mid-tower setups without crowding neighboring motherboard components. Select a single tower for easier clearance around memory sockets, or pick dual towers when your case can accommodate greater heatsink width.
-
Review Fan Lighting Options
Heatsink aesthetics vary from unlit, industrial finishes to addressable illumination. Check the lighting specification to match your visual build requirements. Standard black or unlit models focus strictly on cooling performance without extra wiring. If you want lighting synchronized with your system, verify that the cooler explicitly lists ARGB support. The Thermalright Assassin X 120 ARGB Cooler integrates an ARGB fan for builders wanting illuminated airflow inside a mid-tower case. Choose unlit models if you prefer a clean, dark interior, or choose an ARGB unit if your motherboard includes the appropriate addressable header.
-
Verify Cross Socket Compatibility
If you plan to repurpose your cooler across different motherboards, check the full socket compatibility list. While every cooler here supports LGA 1150, certain models include hardware for older or newer platforms. For example, the JIUWU 92mm 4-Heatpipe Blue LED Cooler supports legacy LGA 775 alongside LGA 1150 and LGA 1151. Other coolers add modern AM4, AM5, or LGA 1700 mounting brackets. Review the listed socket specifications carefully to ensure the heatsink fits your current motherboard and any alternate computer systems you might maintain or upgrade.
Frequently asked questions
Which LGA 1150 CPU cooler is best for small cases?
The SilverStone AR06 58mm Low-Profile CPU Cooler is a practical solution for small form factor builds. It features a 92mm fan and fits users who need low profile without sacrificing heat pipe efficiency. Its 2.5-inch height ensures compatibility with tight chassis clearances for LGA 1150 systems.
What is the thinnest CPU cooler for LGA 1150?
The HIGH Power 80mm 1U LGA 1150 Cooler is the thinnest option at just 1.06 inches high. It is designed for strict height limits and low TDP CPUs in 1U Mini ITX builds. This specialized tool suits compact setups where standard air coolers cannot physically fit.
Does the Thermalright AXP90-X36 support LGA 1150?
Yes, the Thermalright AXP90-X36 supports LGA 1150 among other modern sockets. It delivers four heatpipes and a slim PWM fan inside a 36mm profile. This gives your compact LGA 1150 system solid cooling without vertical clearance issues, making it ideal for ultra-compact ITX builds.
What is the best LGA 1150 cooler for quiet operation?
The JIUWU 92mm 4-Heatpipe CPU Cooler is a compact option for users who prioritize quiet operation. It suits those who do not need the heavy cooling power of larger dual-tower coolers. Its design focuses on easy installation and reduced noise for standard LGA 1150 desktop systems.
Which LGA 1150 cooler has the most heat pipes?
The Thermalright Dual Tower 5-Heatpipe CPU Cooler features five 8mm heat pipes. It delivers 275W TDP dissipation via dual PWM fans and a dual-tower design. It is a solid choice when your LGA 1150 system has the chassis depth to house a large 160mm heatsink.
Is the Thermaltake Gravity i2 good for LGA 1150?
The Thermaltake Gravity i2 92mm CPU Cooler delivers an aluminum top-down heatsink with PWM fan control. It fits compact chassis spaces where basic thermal management is required. Its 3.7-inch height and 11-ounce weight make it a reliable replacement for stock coolers in standard LGA 1150 builds.
What material is the TRONSTORE TS1 cooler made of?
The TRONSTORE TS1 92mm Low-Profile CPU Cooler is constructed from copper and aluminum. It provides basic cooling performance suitable for standard desktop use. This budget-friendly solution fits users who need a compact option for LGA 1150 systems with tight clearance constraints.














