Thermal Grizzly TG Putty Pro 100g Alternatives: 5 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Thermal Grizzly TG Putty Pro 100 alternatives are here if you need a different approach to gap filling. The original product excels at conforming to irregular surfaces to eliminate air pockets between heatsinks and components. Its putty-like consistency allows for precise application without the mess of traditional pastes. However, you might prefer a solid shim for better structural stability or easier removal later. Some builders also want specific material options or pre-sized kits that save time during assembly.
We selected these 5 picks because their specifications overlap with the original use case. Each item in this list offers copper or aluminum conductivity suitable for cooling small components like RAM, VRMs, or M.2 SSDs. You can choose based on whether you need adhesive backing, specific dimensions, or pure metal conductivity. The Easycargo and Alphacool kits provide rigid solutions for precise spacing. These alternatives focus on material properties and size flexibility rather than paste application. This guide helps you find the right spec for your build without guessing.
Our top pick: Easycargo 100-Piece 15mm Copper Shim Kit.
How these copper shims differ
Easycargo 124-Piece Multi-Size Aluminum and Copper Kit
This kit uses aluminum and copper pads with thermal tape, unlike the putty that conforms to gaps. It offers pre-sized pieces for Raspberry Pi or M.2 SSDs, saving you the effort of cutting material. The adhesive backing simplifies mounting small components directly. You lose the ability to fill irregular voids, as these are rigid plates. Choose this if you need standardized sizes for multiple small devices rather than custom gap filling. The mix of materials allows you to balance weight and conductivity for different parts of your build.
Easycargo 20mm Copper Pad Shim Kit
This option provides larger 20mm copper pads, which differ from the small, precise application of the original putty. It is ideal for filling larger gaps around RAM or VRMs where rigidity is acceptable. The pure copper material ensures high thermal conductivity, similar to the putty’s metal content. However, you cannot shape it to fit uneven surfaces. Pick this if you have consistent gaps on standard components. It offers a straightforward solution for spacing issues without the mess of a paste, focusing on direct contact and heat transfer for larger areas.
GeeekPi 102-Piece Aluminum and Copper Heatsink Kit
This kit includes 102 pieces of aluminum and copper heatsinks with thermal tape, targeting Raspberry Pi and small electronics. It differs from the putty by offering rigid, pre-formed solutions rather than a malleable filler. The adhesive tape allows for quick installation on multiple ICs. You sacrifice the ability to seal irregular air pockets completely. Select this if you need to cool several small components simultaneously. It is best for builders who prefer standardized, easy-to-mount heatsinks over custom gap-filling materials for their small form factor builds.
Alphacool 10 x 10mm Copper RAM Heatsinks
These 10x10mm copper heatsinks are designed for passive cooling of GPU RAM and MOSFETs. Unlike the putty, which fills gaps, these attach directly to components to dissipate heat. They offer targeted cooling for specific small areas without adding bulk to the entire system. You give up the versatility of gap filling for focused thermal management. Choose this if your goal is to lower temperatures on specific chips rather than improving contact between a heatsink and a flat surface. It is a specialized solution for silence and targeted heat dissipation.
Alphacool 14 x 14mm Copper Heatsinks 10-Pack
This pack contains 14x14mm copper heatsinks for GPU RAM and MOSFETs. It differs from the putty by providing rigid, high-conductivity pads for direct attachment. The larger size compared to the 10x10mm version covers more surface area on memory chips. You lose the flexibility to fill irregular spaces, as these are fixed plates. Opt for this if you need reliable passive cooling for graphics card components. It fits builders who prioritize direct heat transfer from specific ICs rather than general gap elimination between major cooling blocks.
Quick picks
Our 6 picks
Easycargo 100-Piece 15mm Copper Shim Kit
Best for: custom gap filling for small components
- Material
- Copper C1100
- Compatible Device
- PC, Laptop GPU, CPU, M.2 NVMe SSD
- Length
- 0.6 inches
- Width
- 0.6 inches
View on Amazon: Easycargo 100-Piece 15mm Copper Shim Kit Affiliate link
This kit provides 100 pure copper C1100 shims for filling gaps between components. Each pad measures 15mm by 15mm and offers high thermal conductivity of 401W/mK. You get 12 different thicknesses ranging from 0.1mm to 2mm. This allows you to adjust spacing for GPUs, RAM, or M.2 SSDs. It is a practical solution for custom cooling setups where standard pads do not fit.
Pros
- Pure copper C1100 material for 401W/mK conductivity
- 100 pads included in a single kit
- 12 distinct thickness options from 0.1mm to 2mm
- Uniform 15mm by 15mm square size
Cons
- Requires manual cutting for non-standard gap sizes
- No adhesive backing included in the base configuration
- Limited to 15mm width, unsuitable for larger chips
Good fit if
- You need precise gap filling for M.2 SSDs or VRAM
- You want to customize cooling heights for specific components
- You prefer pure copper over aluminum for heat transfer
Skip if
- You require pre-cut pads for immediate installation
- You need shims larger than 15mm by 15mm
- You want a self-adhesive solution without extra tape
Verdict: Easycargo 15mm Copper Shim Kit is a versatile tool for users who need to fine-tune the distance between heatsinks and components. It fits builders who prioritize material conductivity and size flexibility over convenience.
Easycargo 124-Piece Multi-Size Aluminum and Copper Kit
Best for: Multi-size cooling for small electronics
- Material
- Aluminum and Copper
- Compatible Device
- Raspberry Pi 4, M.2 SSD, PS5
- Mounting Type
- Pre-applied 3M 8810 adhesive tape
- Features
- Thermal Tape
- Length
- 0.56 inches
- Width
- 0.56 inches
View on Amazon: Easycargo 124-Piece Multi-Size Aluminum and Copper Kit Affiliate link
This kit includes 124 heatsinks in nine sizes, combining aluminum and copper materials. It features pre-applied 3M 8810 thermal adhesive tape for direct mounting. The assortment covers small components like VRAM, MOSFETs, and M.2 SSDs. You get various dimensions, including 9mm, 10mm, and 14mm base sizes. The copper pads are notably thin at 0.5mm. This set suits builders needing diverse cooling options for compact electronics.
Pros
- Includes 124 heatsinks across 9 distinct sizes
- Combines aluminum and copper materials for varied thermal properties
- Pre-applied 3M 8810 thermal conductive adhesive tape included
- Features ultra-thin 0.5mm copper pads for low-profile gaps
- Compatible with Raspberry Pi, PS5, and M.2 SSDs
Cons
- Aluminum construction limits peak heat dissipation compared to solid copper
- Adhesive tape limits repositioning once applied to a component
- Heatsink heights are fixed, offering no adjustable height options
Good fit if
- You need a wide variety of sizes for different chips
- You want pre-applied adhesive for quick installation
- You are cooling low-profile components like RAM or SSDs
Skip if
- You require high-performance cooling for large CPUs
- You need to adjust heatsink height after installation
- You prefer solid copper heatsinks for maximum conductivity
Verdict: Easycargo 124pc Aluminum Copper Heatsink Kit provides a versatile assortment for small electronics. It is ideal for users who need multiple sizes for Raspberry Pi or M.2 SSD cooling. The included adhesive tape simplifies the mounting process for these specific components.
Easycargo 20mm Copper Pad Shim Kit
Best for: Precise gap filling for small components
- Material
- Pure Copper C1100
- Compatible Device
- CPU, GPU, VGA, RAM, VRM, PS5 SSD
- Dimensions
- 20mm x 20mm
- Weight
- 4.66 ounces
View on Amazon: Easycargo 20mm Copper Pad Shim Kit Affiliate link
This kit provides 40 pure copper C1100 pads measuring 20mm by 20mm. It includes six thickness options ranging from 0.3mm to 1.5mm. The material offers 401W/mK thermal conductivity for efficient heat transfer. You can use these low-profile shims to fill gaps between components and heatsinks. This set suits builders who need precise spacing for CPUs, GPUs, RAM, or M.2 SSDs.
Pros
- Pure Copper C1100 material ensures high thermal conductivity at 401W/mK
- Includes 40 pads in 6 different thicknesses from 0.3mm to 1.5mm
- Low-profile 20mm x 20mm size fits tight spaces around components
Cons
- Maximum thickness is only 1.5mm, limiting use for large gaps
- Pads are loose pieces requiring separate adhesive or careful placement
- Kit contains only 40 pieces, which may run low for large builds
Good fit if
- You need precise gap filling for M.2 SSDs or VRM heatsinks
- You prefer pure copper for its superior thermal conductivity
- You want multiple thicknesses to fine-tune component spacing
Skip if
- You require pre-adhesive pads for easier installation
- You need thicknesses greater than 1.5mm for large heatsinks
- You are looking for a complete heatsink solution rather than shims
Verdict: Easycargo Pure Copper 20mm Shim Kit offers reliable copper conductivity for precise gap management. It fits users who need to adjust spacing for small components like RAM or SSDs without adding bulk.
GeeekPi 102-Piece Aluminum and Copper Heatsink Kit
Best for: Cooling multiple small Raspberry Pi components
- Material
- Aluminum, Copper
- Compatible Device
- Raspberry Pi, CPU, GPU, Laptop
- Mounting Type
- Thermal conductive adhesive tape
- Dimensions
- 1.57 × 1.57 × 0.43 inches
- Weight
- 7.83 ounces
View on Amazon: GeeekPi 102-Piece Aluminum and Copper Heatsink Kit Affiliate link
This kit includes 102 heatsinks made of aluminum and copper. It comes with thermal conductive adhesive tape for mounting. The set covers 17 categories of sizes, including 92 aluminum and 10 copper units. It fits Raspberry Pi, CPU, GPU, and laptop components. You get a storage box for organization. This is a practical option for cooling various small electronic parts.
Pros
- Includes 92 aluminum and 10 copper heatsinks
- Comes with thermal conductive adhesive tape
- Organized into 17 size categories
- Includes a storage box
Cons
- Uses adhesive tape instead of mechanical mounting
- Contains only 10 copper heatsinks
- Limited to small surface area components
Good fit if
- You need to cool multiple small Raspberry Pi components
- You want a variety of heatsink sizes in one box
- You prefer adhesive mounting for VRM or RAM
Skip if
- You require mechanical mounting for high heat loads
- You need large heatsinks for main CPU cooling
- You only need one specific heatsink size
Verdict: GeeekPi 102-Piece Heatsink Kit provides a wide range of aluminum and copper options for Raspberry Pi and small electronics. It is best for builders who need to cool multiple small ICs with adhesive tape.
Alphacool 10 x 10mm Copper RAM Heatsinks
Best for: Cooling GPU RAM and MOSFETs
- Material
- Solid copper
- Cooling Method
- Passive
- Compatible Device
- GPU RAM, VRam, voltage converters
- Dimensions
- 10 x 10 mm
- Weight
- 0.07 kilograms
View on Amazon: Alphacool 10 x 10mm Copper RAM Heatsinks Affiliate link
This is a pack of ten passive copper heatsinks designed for GPU memory modules and MOSFETs. Each unit measures 10 by 10 millimeters. The material is pure copper, which conducts heat effectively without requiring fans or power. You get a 10-pack, allowing you to cover multiple chips on a graphics card. It is a straightforward solution for cooling specific components on your motherboard or video card.
Pros
- Made from pure copper for efficient heat transfer
- Passive design requires no power or fans
- Compact 10 x 10mm size fits most modules
- Includes 10 units for multiple cooling points
Cons
- Passive cooling only, no active fan support
- Small 10x10mm surface area limits heat dissipation
- Requires thermal adhesive or pads for installation
Good fit if
- You need to cool specific GPU RAM chips
- You want passive cooling for MOSFETs
- You are building a silent PC
Skip if
- You need active cooling with fans
- You require large surface area heatsinks
- You are cooling a standard CPU
Verdict: Alphacool 10x10mm Copper GPU RAM Heatsinks is a targeted solution for users who need passive cooling for specific components like GPU memory or MOSFETs. It fits builders who prioritize silence and targeted heat dissipation on small areas.
Alphacool 14 x 14mm Copper Heatsinks 10-Pack
Best for: Targeted GPU RAM cooling
- Material
- Solid copper
- Cooling Method
- Passive
- Compatible Device
- GPU RAM, VRam, voltage converters
- Dimensions
- 14 x 14 mm
- Weight
- 3.84 ounces
View on Amazon: Alphacool 14 x 14mm Copper Heatsinks 10-Pack Affiliate link
This is a pack of ten passive copper heatsinks designed for GPU RAM and MOSFETs. Each unit measures 14 by 14 millimeters. The material is pure copper for efficient heat transfer. You need to apply thermal adhesive for installation. This kit suits users who need targeted cooling for specific graphics card components rather than general CPU cooling.
Pros
- Material is pure copper
- Pack contains 10 units
- Dimensions are 14 x 14mm
- Designed for passive cooling
Cons
- Passive design requires airflow
- Small 14mm footprint limits surface area
- No adhesive included in specs
Good fit if
- You need to cool specific GPU RAM modules
- You want copper for better conductivity
- You are building a custom PC loop
Skip if
- You need a CPU air cooler
- You require active fan cooling
- You need large surface area heatsinks
Verdict: Alphacool 14mm Copper GPU Heatsink provides targeted passive cooling for graphics card components. It fits builders who need small, high-conductivity copper pads for RAM or MOSFETs.
Specifications side by side
| Spec | Easycargo 100-Piece 15mm Copper Shim Kit | Easycargo 124-Piece Multi-Size Aluminum and Copper Kit | Easycargo 20mm Copper Pad Shim Kit | GeeekPi 102-Piece Aluminum and Copper Heatsink Kit | Alphacool 10 x 10mm Copper RAM Heatsinks | Alphacool 14 x 14mm Copper Heatsinks 10-Pack |
|---|---|---|---|---|---|---|
| Material | Copper C1100 | Aluminum and Copper | Pure Copper C1100 | Aluminum, Copper | Solid copper | Solid copper |
| Cooling Method | not stated | not stated | not stated | not stated | Passive | Passive |
| Compatible Device | PC, Laptop GPU, CPU, M.2 NVMe SSD | Raspberry Pi 4, M.2 SSD, PS5 | CPU, GPU, VGA, RAM, VRM, PS5 SSD | Raspberry Pi, CPU, GPU, Laptop | GPU RAM, VRam, voltage converters | GPU RAM, VRam, voltage converters |
| Dimensions | not stated | not stated | 20mm x 20mm | not stated | 10 x 10 mm | 14 x 14 mm |
| Mounting Type | not stated | Pre-applied 3M 8810 adhesive tape | not stated | Thermal conductive adhesive tape | not stated | not stated |
| Features | not stated | Thermal Tape | not stated | Thermal Tape | not stated | not stated |
| Length | 0.6 inches | 0.56 inches | not stated | not stated | not stated | not stated |
| Width | 0.6 inches | 0.56 inches | not stated | not stated | not stated | not stated |
| Weight | not stated | 5.93 ounces | 4.66 ounces | 7.83 ounces | 0.07 kilograms | 3.84 ounces |
| Color | Copper | not stated | not stated | not stated | Copper | DE-223 |
| Model | ES-C100-1515 | 124-HK | 2020XXC40 | not stated | 17426 | 17427 |
Frequently asked questions
Can copper shims replace thermal putty for gap filling?
Yes, copper shims provide a solid alternative for managing gaps between heatsinks and components. Unlike putty, these rigid pads offer precise thickness control. You can select specific sizes, such as the 15mm or 20mm options, to fit exact spacing needs without the need for curing time or messy application.
Which material conducts heat better for small electronics?
Copper generally offers higher thermal conductivity than aluminum, making it ideal for targeted cooling on small components. The Easycargo 15mm and 20mm kits use pure copper for this reason. If you need versatility across multiple devices, some kits combine both materials, allowing you to choose based on your specific thermal requirements.
Are these shims suitable for RAM and VRM cooling?
Yes, many of these kits are designed specifically for RAM, VRMs, and GPU components. The Alphacool copper heatsinks and Easycargo shims are compatible with these small areas. They help dissipate heat from memory chips and power delivery modules, ensuring stable performance without adding significant bulk to your build.
Do I need adhesive tape for installation?
Some kits include thermal tape to simplify mounting, while others rely on direct contact or separate adhesive. The Easycargo 124-piece and GeeekPi kits come with thermal tape for easy application on Raspberry Pi or M.2 SSDs. Other copper shim packs may require you to source your own adhesive for secure attachment.
What sizes are available for custom gap filling?
You can find a wide range of dimensions to match your specific gaps. Options include 15mm, 20mm, and various other widths and lengths. The Easycargo 15mm kit offers 0.6-inch pieces, while the 20mm kit provides larger 1.57-inch by 6.02-inch pads. This variety allows you to fine-tune spacing for different components.
Are these alternatives good for Raspberry Pi cooling?
Yes, several kits are optimized for Raspberry Pi and similar small electronics. The Easycargo 124-piece and GeeekPi 102-piece kits include multiple sizes ideal for cooling various ICs on a Pi board. Their compact dimensions and included thermal tape make them easy to install on the small form factor boards.