Thermaltake CPU Coolers: 9 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide ranks the best thermaltake CPU coolers by their published specifications. You will find options ranging from compact 92mm units to large 140mm towers, with some models featuring ARGB lighting. The top pick is the Thermaltake 92mm Triple Heatpipe CPU Cooler, which leads for compact setups needing 92mm PWM cooling. We compared 9 products based on the specifications published on the listings. This approach helps you match physical dimensions and thermal hardware to your specific case and processor requirements.
Quick picks
Our 9 picks
Thermaltake 92mm Triple Heatpipe CPU Cooler
Best for: compact setups needing 92mm PWM cooling
- Heat Pipes
- 3
- Fan Size
- 92mm
- Features
- Fan
- Dimensions
- 3.62 × 3.62 × 0.98 inches
- Weight
- 1.05 pounds
The Thermaltake ISGC-200 is an air cooler built with a slim 92mm PWM fan, three heatpipes, and a copper and aluminum base. It uses a dual-module heatsink with sawtooth fin profiling alongside a Hydro Dynamic Bearing fan to handle airflow. If you need a compact side-flow cooler that uses standard 4-pin PWM control and fits within modest case clearances, this unit provides targeted cooling without taking up excessive motherboard space.
Pros
- Three heatpipes paired with a copper and aluminum base
- Slim 92mm PWM fan with Hydro Dynamic Bearing
- Dual heatsink module architecture with sawtooth fins
- 4-pin PWM connection for dynamic fan speed adjustment
Cons
- Uses a 92mm fan rather than a larger 120mm fan
- No integrated RGB or ARGB lighting hardware
Good fit if
- You need a compact 92mm cooler with PWM fan control.
- You prefer a copper and aluminum base with three dedicated heatpipes.
Skip if
- You want a larger 120mm fan setup for higher airflow volume.
- You require addressable RGB lighting for your build aesthetics.
Verdict: Thermaltake ISGC-200 92mm PWM CPU Cooler combines three heatpipes, a dual sawtooth fin stack, and an HDB fan for compact cooling. It provides straightforward thermal hardware without lighting extras.
Thermaltake Gravity i2 92mm CPU Cooler
Best for: compact Intel LGA 1200 and 115x builds
- Socket Compatibility
- LGA 1200/1156/1155/1150/1151
- Tower Design
- Low-profile
- Fan Size
- 92mm
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.7 × 2.4 × 3.7 inches
The Thermaltake Gravity i2 92mm CPU Cooler is a compact top-flow heatsink built from extruded aluminum. It features a 7-bladed 92mm fan with a 4-pin PWM connector for motherboard speed control. Standing 3.7 inches tall and weighing 11 ounces, it fits Intel Core i7, i5, and i3 processors on LGA 1200, 1150, 1151, 1155, and 1156 sockets. This basic cooler suits you if you need a straightforward stock replacement.
Pros
- 4-pin PWM connector enables automated fan speed control
- Compact 3.7-inch height fits space-restricted computer cases
- Compatible with Intel LGA 1200, 1150, 1151, 1155, and 1156 sockets
- Features a 7-bladed 92mm cooling fan
Cons
- Lacks AMD socket compatibility
- Uses a solid aluminum block without copper heatpipes
Good fit if
- You run a compatible Intel LGA 1200, 1156, 1155, 1150, or 1151 processor.
- You need a low-profile 3.7-inch cooler for compact case clearance.
Skip if
- You use an AMD CPU platform.
- You need a multi-heatpipe tower cooler for high thermal demands.
Verdict: Thermaltake Gravity i2 92mm CPU Cooler delivers straightforward aluminum cooling with PWM fan regulation for compatible Intel sockets. Its 3.7-inch height makes it an easy fit for space-limited desktop enclosures.
Thermaltake Frio Dual 140mm CPU Cooler
Best for: High-TDP cooling on supported legacy sockets
- Socket Compatibility
- Intel Socket 2011, 1366, 1156, 1155, 775
- Heat Pipes
- 6
- Fan Size
- 140mm
- TDP Rating
- 250W
- Dimensions
- 8.75 × 7.5 × 7 inches
- Weight
- 3 pounds
The Thermaltake Frio Extreme is an air cooler rated for up to 250W TDP. It features dual 140mm VR/PWM fans in a push-pull configuration and six 6mm heat pipes to pull thermal loads away from your processor. If you run high-power CPUs on platforms like Intel LGA 2011 or AMD AM3+ and have a chassis that fits a 7-inch height, this setup gives you heavy-duty cooling.
Pros
- High 250W TDP rated thermal capacity
- Dual 140mm fans in a push-pull airflow setup
- Six 6mm heat pipes for heat dissipation
- Thermal compound included in the box
Cons
- Height of 7 inches requires a wide computer case
- Heavy 3-pound weight adds physical load to the motherboard
- Mounting list lacks newer sockets such as AM4, AM5, or LGA 1700
Good fit if
- You run high-draw CPUs on supported sockets such as Intel LGA 2011 or AMD AM3+.
- You have a PC chassis with over 7 inches of vertical cooler clearance.
- You want dual 140mm fans operating together for maximum airflow.
Skip if
- You use modern sockets like AMD AM4/AM5 or Intel LGA 1700.
- You build inside a compact case unable to fit a 7-inch cooler.
Verdict: Thermaltake Frio Extreme Dual 140mm CPU Cooler delivers 250W TDP heat dissipation using six 6mm heat pipes and dual fans. It suits supported legacy Intel and AMD platforms requiring high thermal headroom.
Thermaltake Gravity i2 92mm Intel CPU Cooler
Best for: low-power Intel desktop builds up to 95W
- Socket Compatibility
- LGA 1200/1156/1155/1150/1151
- Tower Design
- Low Profile
- Fan Size
- 92mm
- TDP Rating
- 95W
- System Type
- Desktop
- Dimensions
- 4.25 × 4.25 × 4 inches
View on Amazon: Thermaltake Gravity i2 92mm Intel CPU Cooler
The Thermaltake Gravity i2 92mm Intel CPU Cooler is a compact desktop cooler designed for low-power Intel processors. It features a 92mm 7-bladed fan rated for 31.343 CFM airflow and a 21.3 decibel noise level. With a 4-inch height and support for 95W processors, this unit fits standard desktop cases. It suits you if you need a simple replacement cooler for compatible Intel LGA 1200 or 115x motherboards.
Pros
- Operates at a rated noise level of 21.3 decibels
- 7-bladed 92mm fan delivers 31.343 CFM airflow
- Compact 4-inch height fits low-clearance desktop setups
- Includes a 2-year warranty
Cons
- No AMD socket compatibility listed
- Limited to low-power processors up to 95W
Good fit if
- You use an Intel LGA 1200, 1156, 1155, 1151, or 1150 motherboard.
- You need a quiet 4-inch cooler for a CPU rated at 95W or lower.
Skip if
- You run an AMD platform build.
- You use a high-draw CPU that exceeds 95W.
Verdict: Thermaltake Gravity i2 92mm Intel CPU Cooler provides quiet 21.3-decibel cooling for compatible Intel desktop processors up to 95W.
Thermaltake UX200 ARGB Tower Cooler
Best for: mid-range 130W processors needing ARGB lighting
- Socket Compatibility
- Intel, AM5, AMD, LGA 1200
- Heat Pipes
- 4
- TDP Rating
- 130W
- Lighting
- ARGB
- Dimensions
- 5 × 3 × 6 inches
- Weight
- 2.19 ounces
The Thermaltake UX200 ARGB CPU Cooler is a 6-inch tall tower cooler designed for builds needing direct-contact heat dissipation. It features four 6mm U-shaped copper heat pipes rated for up to 130W TDP, paired with a 9-blade hydraulic bearing fan. Integrated lighting includes 15 addressable LEDs compatible with 5V motherboard headers. This unit fits your setup if you run compatible AMD or Intel sockets and want synchronized illumination.
Pros
- Four 6mm direct-contact copper heat pipes
- 130W TDP thermal support rating
- 15 addressable LEDs compatible with 5V motherboard sync
- Hydraulic bearing fan with 9 high-airflow blades
Cons
- 6-inch height requires sufficient chassis clearance
- Socket support in spec sheet limited to AM5 and LGA 1200
Good fit if
- You have a processor rated at 130W TDP or below.
- You use a motherboard with a 5V ARGB header for synchronized lighting.
- You need a tower cooler that fits within 6 inches of vertical clearance.
Skip if
- You run high-draw processors requiring more than 130W TDP cooling capacity.
- You use a compact chassis with less than 6 inches of cooler height.
Verdict: Thermaltake UX200 ARGB CPU Cooler provides dependable thermal transfer for chips up to 130W using four direct-contact copper heat pipes and a 9-blade hydraulic fan. It serves as a practical tower option if you want integrated 5V addressable RGB lighting within a 6-inch vertical footprint.
Thermaltake TOUGHAIR 110 Top Flow Cooler
Best for: LGA 1700 compact builds
- Socket Compatibility
- LGA 1700, 1200
- Cooler Height
- 114 mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 140 W
- Fan Speed
- 2000 RPM
The Thermaltake TOUGHAIR 110 is a 114 mm tall top-flow air cooler supporting up to 140 W TDP. It uses four Ø6 mm copper heat pipes and a 120 mm fan running at 2000 RPM. This design helps cool the CPU and nearby motherboard components. It fits LGA 1700 and LGA 1200 sockets. You get a compact black and silver unit weighing 1 pound.
Pros
- Supports 140 W TDP for high-performance CPUs
- Four Ø6 mm copper heat pipes for direct heat transfer
- Top-flow design aids cooling of surrounding motherboard components
- Fan speed reaches 2000 RPM for high static pressure
Cons
- Limited socket compatibility to LGA 1700 and LGA 1200
- Single 120 mm fan limits airflow compared to dual-fan models
- No mention of ARGB lighting or software control in specs
Good fit if
- You need a cooler for an LGA 1700 socket
- You want a top-flow design to improve case airflow
- You have a compact case with limited height clearance
Skip if
- You use an AMD socket or older Intel sockets
- You require RGB lighting synchronization
- You need support for CPUs exceeding 140 W TDP
Verdict: Thermaltake TOUGHAIR 110 Top Flow Cooler fits users with LGA 1700 processors who need efficient top-down airflow. It works well in compact builds where space is tight.
Thermaltake TOUGHAIR 510 180W Dual 120mm
Best for: Standard ATX cases needing 180W cooling
- Cooler Height
- 4.72 inches
- Heat Pipes
- 4
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- TDP Rating
- 180 W
- Fan Speed
- 2000 RPM
The Thermaltake TOUGHAIR 510 is a universal air cooler rated for 180W TDP. It uses four 6mm copper heat pipes in a U-shape to move heat away from the processor. The dual 120mm fans spin up to 2000 RPM for high static pressure. You should choose this if you need broad socket support for Intel LGA 1851 or AMD AM4. It fits most standard cases despite its 4.72-inch height.
Pros
- 180W TDP rating for high performance
- Four 6mm copper heat pipes with U-shape design
- Dual 120mm fans reaching 2000 RPM
- Universal compatibility with Intel LGA 1851 and AMD AM4
Cons
- 4.72-inch height requires checking case clearance
- 1-pound weight adds load to the motherboard
- No mention of RGB lighting or software control
Good fit if
- You need a cooler for Intel LGA 1851 or 1700 sockets
- You want high static pressure for dense fin stacks
- You have a mid-tower case with sufficient RAM clearance
Skip if
- You are building in a small form factor case
- You require RGB lighting synchronization
- You need a cooler under 4 inches tall
Verdict: Thermaltake TOUGHAIR 510 180W Dual 120mm is a solid choice for users with standard ATX cases who need strong cooling for modern Intel or AMD processors. It delivers reliable performance through its dual fans and copper pipes.
Thermaltake UX200 SE ARGB Air Cooler
Best for: Intel LGA 1851 builds needing synchronized lighting
- Socket Compatibility
- LGA 1851, 1700, 1200, AM4, AM5
- Heat Pipes
- 4
- TDP Rating
- 170W
- Lighting
- ARGB
- Color
- Black
- Dimensions
- 5.2 × 4.9 × 7.3 inches
The Thermaltake UX200 SE ARGB Tower Cooler is an air cooling unit featuring four 6mm direct-contact copper heat pipes rated for thermal loads up to 170W. It includes a 9-blade fan lit by 15 addressable LEDs that synchronize with 5V motherboard headers. Standing 7.3 inches tall, this cooler suits you if you build on Intel LGA 1851 or AMD AM5 sockets and need synchronized lighting.
Pros
- Supports Intel LGA 1851 and AMD AM5 processor sockets
- Four 6mm direct-contact copper heat pipes rated up to 170W
- Built-in 15-LED ARGB array syncs via 5V motherboard headers
- Nine-blade fan pushes air through an aluminum fin stack
Cons
- Height of 7.3 inches requires substantial PC case clearance
- 170W rating restricts use on higher-power CPUs
Good fit if
- You run an Intel LGA 1851 or AMD AM5 processor under 170W
- You want addressable lighting controlled directly by a 5V motherboard header
- You have a PC chassis with at least 7.3 inches of cooler clearance
Skip if
- You use a compact chassis that cannot clear a 7.3-inch tall heatsink
- You operate a high-draw processor that requires more than 170W cooling capacity
Verdict: Thermaltake UX200 SE ARGB Tower Cooler delivers broad socket coverage including Intel LGA 1851 alongside 170W dissipation and motherboard-synced lighting. It provides a straightforward cooling solution if your chassis accommodates its 7.3-inch height.
Thermaltake 120mm ARGB White Cooler
Best for: unobstructed RAM clearance and modern socket builds
- Cooler Height
- 5.98 inches
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120mm
- TDP Rating
- 240W
- Fan Speed
- 1800 RPM
This is a white single-tower heatsink equipped with four 6mm direct-touch copper heat pipes and a 120mm ARGB PWM fan. It handles cooling performance up to 240W and stands just under six inches tall. The non-interference design leaves your memory slots completely unobstructed. It suits you if you need broad Intel or AMD socket compatibility, addressable lighting, and full clearance for tall RAM.
Pros
- Four 6mm direct-touch copper heat pipes rated for up to 240W cooling
- Non-interference design prevents overlap with memory slots
- Supports Intel LGA 1851/1700 and AMD AM5/AM4 sockets
- 120mm ARGB PWM fan features hydraulic bearing and 700 to 1800 RPM range
Cons
- Height of 5.98 inches requires nearly six inches of case clearance
- Includes only a single fan rather than a push-pull dual-fan setup
Good fit if
- You need a 240W-rated cooler that will not block your memory modules.
- You build on modern platforms such as Intel LGA 1851/1700 or AMD AM5/AM4.
- You want an all-white tower cooler with addressable RGB fan lighting.
Skip if
- You use a compact chassis with less than 5.98 inches of CPU cooler clearance.
- You need a dual-tower heatsink configuration for heavier thermal demands.
Verdict: Thermaltake 120mm White ARGB Tower Cooler provides capable 240W heat dissipation with broad socket coverage. Its offset layout keeps your memory slots fully accessible while maintaining a compact single-tower footprint.
Specifications side by side
| Spec | Thermaltake 92mm Triple Heatpipe CPU Cooler | Thermaltake Gravity i2 92mm CPU Cooler | Thermaltake Frio Dual 140mm CPU Cooler | Thermaltake Gravity i2 92mm Intel CPU Cooler | Thermaltake UX200 ARGB Tower Cooler | Thermaltake TOUGHAIR 110 Top Flow Cooler | Thermaltake TOUGHAIR 510 180W Dual 120mm | Thermaltake UX200 SE ARGB Air Cooler | Thermaltake 120mm ARGB White Cooler |
|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | LGA 1200/1156/1155/1150/1151 | Intel Socket 2011, 1366, 1156, 1155, 775 | LGA 1200/1156/1155/1150/1151 | Intel, AM5, AMD, LGA 1200 | LGA 1700, 1200 | not specified | LGA 1851, 1700, 1200, AM4, AM5 | not specified |
| Cooler Height | not specified | not specified | not specified | not specified | not specified | 114 mm | 4.72 inches | not specified | 5.98 inches |
| Heat Pipes | 3 | not specified | 6 | not specified | 4 | 4 | 4 | 4 | 4 |
| Tower Design | not specified | Low-profile | not specified | Low Profile | not specified | not specified | Dual-Tower | not specified | Single-Tower |
| Fan Size | 92mm | 92mm | 140mm | 92mm | not specified | 120mm | 120mm | not specified | 120mm |
| TDP Rating | not specified | not specified | 250W | 95W | 130W | 140 W | 180 W | 170W | 240W |
| Fan Speed | not specified | not specified | not specified | not specified | not specified | 2000 RPM | 2000 RPM | not specified | 1800 RPM |
| Lighting | not specified | not specified | not specified | not specified | ARGB | not specified | not specified | ARGB | ARGB |
| System Type | not specified | not specified | not specified | Desktop | not specified | not specified | not specified | not specified | not specified |
| Color | not specified | Black | not specified | Black | RGB Tower | Black, Silver | Black, Silver | Black | White |
| Material | not specified | Aluminum | not specified | not specified | not specified | Copper | Copper | not specified | Copper |
| Features | Fan | Fan | not specified | not specified | not specified | Fan | Fan | not specified | Fan |
| Dimensions | 3.62 × 3.62 × 0.98 inches | 3.7 × 2.4 × 3.7 inches | 8.75 × 7.5 × 7 inches | 4.25 × 4.25 × 4 inches | 5 × 3 × 6 inches | 5.42 × 4.87 × 4.49 inches | 4.72 × 0.98 × 4.72 inches | 5.2 × 4.9 × 7.3 inches | 4.92 × 3.62 × 5.98 inches |
| Weight | 1.05 pounds | 11 ounces | 3 pounds | 11.4 ounces | 2.19 ounces | 1 pounds | 1 pounds | not specified | 1.1 pounds |
| Model | CLP0538 | CLP0556-B | CLP0587 | CLP0556-D | CL-P065-AL12SW-A | CL-P073-AL12BL-A | CL-P075-AL12BL-A | CL-P105-AL12SW-A | UX400 ARGB White |
| Size | not specified | Intel | not specified | Intel | AMD/Intel | AMD/Intel | AMD/Intel | AMD/Intel | not specified |
Thermaltake CPU Cooler Options
You can choose based on socket support and thermal needs. The Thermaltake 92mm Triple Heatpipe CPU Cooler suits compact builds with its small footprint. For LGA 1700 processors, the TOUGHAIR 110 Top Flow Cooler provides efficient top-down airflow in tight spaces. If you need high TDP dissipation for legacy platforms, the Frio Dual 140mm CPU Cooler offers substantial heat removal through its six heat pipes. Some models support modern AM5 and LGA 1851 sockets for future-proofing. Other options target specific desktop or budget requirements with aluminum construction. You should verify your motherboard compatibility before purchasing. Lighting features vary across the lineup, with some units offering ARGB synchronization while others remain unlit for a cleaner aesthetic. Consider your case dimensions and RAM clearance when selecting a tower height.
Where Thermaltake Fits Your Build
Thermaltake covers a wide range of sizes, from 92mm compact units to 140mm high-TDP towers. You can choose between single-tower and dual-fan designs, with or without ARGB lighting. The lineup supports modern sockets like LGA 1700 and AM5, alongside legacy options. However, none of these models feature liquid cooling or dual-tower configurations. You will also not find silent fans without PWM control or non-addressable RGB in this specific selection. This brand suits users who prefer air cooling with varied aesthetic choices.
For liquid cooling options, see our list of best thermaltake aio liquid coolers.
How to Choose the Right Thermaltake Cooler
-
Check Socket Compatibility
Your processor socket determines which cooler fits. The Thermaltake UX200 SE ARGB Tower Cooler supports AM5 and LGA 1851, making it suitable for the latest Intel and AMD platforms. Other models like the Gravity i2 cover older LGA 115x series. Always verify the socket list in the specifications before purchasing. Mismatched sockets prevent installation. Ensure the mounting hardware matches your motherboard to avoid compatibility issues during assembly.
-
Evaluate Heat Pipe Count
Heat pipes transfer heat from the CPU to the fins. The Thermaltake Frio Dual 140mm CPU Cooler uses six 6mm heat pipes to handle high TDP loads up to 250W. Fewer pipes, like the three in the 92mm Triple Heatpipe model, suit lower thermal demands. More pipes generally mean better heat dissipation for powerful processors. Check the pipe count to ensure the cooler can manage your chip's thermal output effectively under load.
-
Consider Tower Design
Single-tower designs save space and RAM clearance. The Thermaltake 120mm ARGB White Cooler uses an offset layout to keep memory slots accessible. Dual-fan towers, like the TOUGHAIR 510, offer more surface area for heat exchange. Choose a single tower for compact cases or dual fans for high-performance builds. The design affects both cooling capacity and physical fit within your chassis. Select the configuration that matches your case dimensions and cooling needs.
-
Assess Fan Size
Fan size influences airflow and noise levels. The Frio Extreme Dual 140mm uses large fans for quiet, high-volume cooling. Smaller 92mm fans, found in the Gravity i2, spin faster to move air through dense fins. Larger fans generally run quieter at the same airflow. Match the fan size to your case's mounting options. Ensure your chassis can accommodate the specific fan dimensions to maintain proper airflow and cooling efficiency.
-
Review Lighting Features
ARGB lighting adds visual appeal to your build. The UX200 ARGB CPU Cooler includes 5V addressable RGB for synchronized effects. If you prefer a clean look, the Gravity i2 offers a standard black finish without lighting extras. Check if your motherboard supports ARGB headers for control. Lighting does not affect cooling performance. Choose based on aesthetic preference and whether your system components support synchronized lighting features.
Frequently asked questions
Which Thermaltake cooler is best for compact setups?
The Thermaltake 92mm Triple Heatpipe CPU Cooler is the top pick for compact builds. It measures 3.62 by 3.62 inches with a height of 0.98 inches. The unit uses three heatpipes and a dual sawtooth fin stack for efficient cooling. It weighs 1.05 pounds and includes a PWM fan for straightforward thermal management without extra lighting.
Does Thermaltake make coolers for LGA 1700 processors?
Yes, the Thermaltake TOUGHAIR 110 Top Flow Cooler supports LGA 1700 sockets. It is designed for efficient top-down airflow in tight spaces. The cooler measures 5.42 by 4.87 inches with a height of 4.49 inches. It weighs one pound and features copper construction to help dissipate heat effectively for compatible Intel processors.
What is the highest TDP Thermaltake cooler supports?
The Thermaltake Frio Dual 140mm CPU Cooler supports up to 250W TDP. It uses six 6mm heatpipes and dual fans to handle high thermal loads. The unit is large, measuring 8.75 by 7.5 inches with a height of 7 inches. It weighs three pounds and is suited for legacy Intel and AMD platforms requiring significant cooling headroom.
Are there Thermaltake coolers with ARGB lighting?
Several models include ARGB lighting, such as the UX200 ARGB Tower Cooler and the UX200 SE ARGB Air Cooler. The UX200 SE supports LGA 1851 and AM5 sockets with synchronized motherboard lighting. The standard UX200 supports LGA 1200 and AM5. Both models feature 5V addressable RGB lighting for users who want integrated visual effects.
Which Thermaltake cooler is best for low-power Intel builds?
The Thermaltake Gravity i2 92mm Intel CPU Cooler is ideal for low-power desktop builds up to 95W. It operates at a quiet 21.3 decibels. The cooler supports LGA 1200, 1150, and 1151 sockets. It measures 4.25 by 4.25 inches with a height of 4 inches. The unit weighs 11.4 ounces and provides straightforward cooling for compatible Intel processors.
What is the tallest Thermaltake cooler on this list?
The Thermaltake UX200 SE ARGB Air Cooler is the tallest option at 7.3 inches. It measures 5.2 by 4.9 inches with a width of 4.9 inches. This model supports LGA 1851 and AM5 sockets and handles up to 170W. It features black coloring and ARGB lighting for a straightforward tower solution if your chassis accommodates the height.
Does Thermaltake offer a white ARGB cooler?
Yes, the Thermaltake 120mm ARGB White Cooler is available in white. It provides 240W heat dissipation with a single-tower design. The cooler measures 4.92 by 3.62 inches with a height of 5.98 inches. It weighs 1.1 pounds and uses copper construction. The offset layout ensures unobstructed RAM clearance while maintaining a compact footprint for modern socket builds.
Which Thermaltake cooler is best for standard ATX cases?
The Thermaltake TOUGHAIR 510 180W Dual 120mm is a solid choice for standard ATX cases. It supports LGA 1851 and LGA 1200 sockets. The cooler uses dual fans and copper pipes for reliable performance. It measures 4.72 by 4.72 inches with a height of 4.72 inches. The unit weighs one pound and offers strong cooling for modern Intel or AMD processors.