Thermaltake Gravity i2 92mm CPU Cooler Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermaltake 7 bladed 92mm 4 pins pwm review looks at a low-profile air cooler designed for compact builds. The unit features an aluminum extrusion heatsink and a 92mm fan. Its compact dimensions of 3.7 inches in height and 2.4 inches in width make it suitable for small form factor cases. It supports Intel sockets including LGA 1200, 1156, 1155, 1150, and 1151. The 4-pin PWM connector allows for variable speed control. This setup prioritizes physical fitment and basic cooling capability over high-end performance metrics.
What stands out
- Low-profile aluminum extrusion heatsink design
- 92mm fan with seven blades for airflow
- 4-pin PWM connector for speed control
- Supports Intel LGA 1200 and older sockets
- Compact height of 3.7 inches
Who it fits
Good fit for
You should consider this cooler if you are building a small form factor PC or have a case with strict CPU cooler height limits. The 3.7-inch height allows it to fit where larger towers cannot. It is also a good match for Intel Core i3 or i5 processors that do not require massive cooling capacity. If your build relies on Intel LGA 115x or 1200 sockets and you need a simple, plug-and-play solution, this fits your needs.
Who should skip it
You should skip this option if you use an Intel Core i7 processor or plan to overclock. The single 92mm fan and small aluminum fin stack may struggle with high heat output. This cooler lacks the surface area and fan count needed for demanding workloads. Additionally, if you need AMD socket support, you must check the specific variation, as this listing specifies Intel compatibility. High-performance gaming rigs will likely outgrow this unit quickly.
Verdict: This is a functional low-profile cooler for light Intel workloads and tight cases. It fits well but does not offer high cooling performance for power users.
Key specs explained
Fan Size: 92mm
A 92mm fan is smaller than the standard 120mm or 140mm units found on most air coolers. This size allows the cooler to fit into cases with tight clearance limits. You get adequate airflow for low to mid-range processors. The smaller blade diameter often results in a higher pitch sound at maximum speed. Compare this with larger fans if you prioritize silence over compactness.
Tower Design: Low-profile
This designation means the heatsink is shorter than standard tower coolers. It is designed to clear tall RAM modules and fit inside small form factor cases. You benefit from easier installation in constrained spaces. The trade-off is less surface area for heat dissipation compared to massive dual-tower designs. Check your case specifications to ensure this height works for your build.
Socket Compatibility: LGA 1200/1156/1155/1150/1151
This list tells you which Intel motherboards support this cooler. It covers several generations of Intel desktop processors. You can use this unit if your board uses one of these specific socket types. It does not support newer sockets like LGA 1700 or AMD platforms without adapters. Verify your motherboard model before purchasing to ensure physical fitment and mounting hardware inclusion.
Connector: 4-Pins PWM
A 4-pin connector allows the motherboard to control fan speed based on CPU temperature. This is known as Pulse Width Modulation. You get automatic noise reduction when the system is idle. The fan spins faster only when the CPU needs more cooling. This is the standard for modern systems. Avoid 3-pin fans if you want precise thermal management without manual adjustment.
Design and Build Overview
The Thermaltake Gravity i2 uses an aluminum extrusion heatsink. According to the listing, this material choice keeps the unit lightweight while providing efficient heat dissipation. The low-profile tower design is central to its build. It stands 3.7 inches tall and measures 2.4 inches wide. This compact footprint allows it to fit into small form factor cases where larger coolers would not clear the side panel or RAM slots.
The cooler weighs 11 ounces. This moderate weight ensures the heatsink stays securely mounted without requiring excessive retention pressure on the motherboard. The 92mm fan features seven blades. According to the listing, this specific blade count helps balance airflow and noise levels. The fan connects via a 4-pin PWM header. This allows your motherboard to automatically adjust the fan speed based on CPU temperature. You get dynamic cooling control without needing additional controllers.
The finish is black, which matches most modern PC cases. The compact size means it does not obstruct nearby components. You can install it on Intel sockets including LGA 1200, 1156, 1155, 1150, and 1151. The quick installation feature simplifies the process for users who prefer straightforward assembly. The design prioritizes fitment in tight spaces over raw thermal performance.
Installation and Daily Operation
The listing highlights quick and easy installation as a core feature. This suggests you do not need complex tools or extensive time to mount the unit. The cooler is designed for Intel processors, specifically supporting LGA 1200, 1156, 1155, 1150, and 1151 sockets. You must verify your motherboard socket matches one of these options before purchase. The unit is sized for Intel systems, which may limit direct compatibility with AMD platforms unless you select the specific AMD/Intel variation mentioned in the product options.
Once installed, the 92mm fan connects via a 4-pin PWM header. This allows your motherboard to adjust fan speed based on CPU temperature automatically. The 7-blade design aims to balance airflow and noise levels. Because the fan is smaller than standard 120mm units, it operates within a case with tighter clearances. You should ensure your computer case allows for at least 3.7 inches of height above the CPU socket. The aluminum extrusion heatsink transfers heat away from the processor. It does not use copper heat pipes according to the provided data. Daily use involves the fan running quietly while the aluminum fins dissipate heat. This setup suits users who need a compact solution for Intel Core i3, i5, or i7 processors without sacrificing too much cooling capacity.
Before You Buy This Cooler
You should verify your case clearance before purchasing. This unit stands 3.7 inches tall, which is quite low. If your RAM sticks are tall, they may block the fan. You must also confirm your motherboard socket. The listing supports Intel LGA 1200, 1156, 1155, 1150, and 1151. It does not list AMD sockets in the primary specs, though variations exist. Check the specific SKU for AMD support if needed. Maintenance is minimal. The aluminum fins do not require special cleaning, but you should dust them occasionally to maintain airflow. The 92mm fan runs at lower RPMs than larger fans, so it may not move as much air. This cooler suits users with strict height limits or older Intel systems. It sits alongside other low-profile options by prioritizing fit over raw cooling power. You are buying a specialized tool for tight spaces, not a high-end gaming solution.
Check before you buy
- Check your CPU socket matches LGA 1200 or 115x series
- Measure case height clearance against the 3.7 inch limit
- Ensure RAM height does not interfere with the 92mm fan
- Confirm the specific variation includes your desired socket type
The product at a glance
Thermaltake Gravity i2 92mm CPU Cooler
Best for: Small cases with Intel CPUs
- Socket Compatibility
- LGA 1200/1156/1155/1150/1151
- Tower Design
- Low-profile
- Fan Size
- 92mm
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.7 × 2.4 × 3.7 inches
View on Amazon: Thermaltake Gravity i2 92mm CPU Cooler Affiliate link
The Thermaltake Gravity i2 is a low-profile aluminum extrusion cooler designed for Intel sockets. It features a 92mm 4-pin PWM fan with seven blades to balance cooling performance and noise. The unit measures 3.7 inches in height and weighs 11 ounces. It fits LGA 1200, 1156, 1155, 1150, and 1151 sockets. This compact design suits builds with limited case clearance or modest thermal needs.
Pros
- Low-profile 3.7-inch height fits tight cases
- 92mm 7-blade fan for efficient airflow
- 4-pin PWM support for speed control
- Aluminum extrusion heatsink for heat dissipation
Cons
- Only supports Intel sockets, not AMD
- Small 92mm fan size limits peak cooling
- Single fan design lacks dual-tower redundancy
Good fit if
- You need a cooler under 4 inches tall
- You use an Intel LGA 115x or 1200 socket
- You prioritize low noise over maximum cooling
Skip if
- You have an AMD processor
- You need to cool high-end CPUs
- You require a dual-tower design
Verdict: Thermaltake Gravity i2 92mm Low-Profile Cooler is a compact solution for Intel users with small cases. It works well for entry-level processors where height is the main constraint.
Specifications side by side
| Spec | Thermaltake Gravity i2 92mm CPU Cooler |
|---|---|
| Socket Compatibility | LGA 1200/1156/1155/1150/1151 |
| Tower Design | Low-profile |
| Fan Size | 92mm |
| Material | Aluminum |
| Features | Fan |
| Dimensions | 3.7 × 2.4 × 3.7 inches |
| Weight | 11 ounces |
| Size | Intel |
| Color | Black |
| Model | CLP0556-B |
Frequently asked questions
Does the Thermaltake Gravity i2 support AMD sockets?
No, this cooler is designed for Intel processors only. The product data lists compatibility with LGA 1200, LGA 1150, and LGA 1151 sockets. It does not mention support for any AMD AM4 or AM5 mounting hardware. You must verify your motherboard socket type before installation to ensure proper fit.
What is the maximum height clearance for this cooler?
The unit stands 3.7 inches tall. This low-profile dimension makes it suitable for cases with strict CPU clearance limits. You should measure your case interior to confirm it can accommodate this height. Tall RAM modules might interfere with the fan, so checking your specific hardware layout is essential.
Is the fan speed adjustable via PWM?
Yes, the cooler uses a 4-pin PWM fan connector. This allows your motherboard to automatically adjust fan speed based on CPU temperature. You get variable cooling performance without manual intervention. The 92mm fan size provides adequate airflow for entry-level processors while maintaining a compact footprint.
How much does the Thermaltake Gravity i2 weigh?
The cooler weighs 11 ounces. This lightweight design is partly due to its aluminum extrusion heatsink construction. The reduced weight minimizes stress on your motherboard socket. It remains a manageable size for small form factor builds where heavy coolers are impractical.
What color is the Thermaltake Gravity i2?
The unit is black. This neutral color helps it blend with most modern PC cases and components. The black finish covers both the aluminum heatsink and the 92mm fan frame. It offers a clean aesthetic for compact builds without drawing unnecessary attention.
Is this cooler suitable for gaming PCs?
It is best for entry-level processors in small cases. The 92mm fan and aluminum heatsink provide sufficient cooling for low to mid-range Intel CPUs. High-end gaming rigs may require larger coolers for better thermal performance. Check your CPU's thermal design power before relying on this compact solution.
What is the model number for this cooler?
The model number is CLP0556-B. You can use this identifier to verify compatibility or find replacement parts. It distinguishes this specific 92mm low-profile unit from other Thermaltake products. Always cross-reference this number with your motherboard manual to ensure correct mounting bracket support.