6 Best Alternatives to the Goshyda 2U Active LGA2011 Server (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The goshyda p0048ap4 CPU heat sink alternatives list helps you find replacements for this specific 2U active cooler. This unit supports LGA 2011 narrow ILM sockets and runs at 8400 RPM for fast heat dissipation. It includes tools for DIY installation and fits Xeon E5 2600 series processors. You might seek other options if you need a different server height, a different socket type, or a brand with a longer track record. Some users may also prefer a cooler with different physical dimensions to fit their specific chassis constraints.
The alternatives in this guide were chosen because their specifications overlap with the original product. We compared socket compatibility, server height, and cooling methods to ensure each option serves a similar purpose. You will find options for 4U chassis, AMD SP3 sockets, and various LGA 2011 configurations. Each product is evaluated based on its published specs rather than subjective performance claims. This approach ensures you can match the hardware to your exact technical requirements. The list covers budget choices, premium builds, and direct OEM replacements. Review the details below to select the cooler that fits your server build.
Our top pick: Goshyda 2U Active LGA2011 Server Heatsink.
Comparing 2U LGA2011 Cooler Options
Supermicro SNK-P0051AP4 LGA2011 Active Cooler
The Supermicro SNK-P0051AP4 differs significantly in form factor. It measures 7.48 by 4.72 by 5.51 inches and weighs two pounds. This design suits 4U chassis rather than the 2U space required by the Goshyda unit. It supports LGA 2011 sockets and uses active cooling. You should choose this option only if your server case has ample vertical clearance. It is unsuitable for standard 2U systems or modern LGA2011 builds that need compact profiles. The larger size allows for different thermal management strategies but limits placement options in dense server racks.
Sunydog LGA 2011 2U Active CPU Cooler
The Sunydog LGA 2011 cooler is a budget-friendly alternative for server replacement. It shares the 2U server height and active cooling method with the Goshyda P0048AP4. It targets technicians who need to replace failed units in LGA 2011 systems. The focus is on raw cooling power rather than brand prestige. It fits users who prioritize cost-effective solutions for standard server environments. You get a direct functional equivalent without the specific model number of the original. This option is ideal for budget-conscious builds where the primary goal is restoring cooling functionality quickly and inexpensively.
Phefop 2U Active LGA 2011 CPU Cooler
The Phefop 2U Active Cooler offers a direct fit for LGA2011 processors. It supports both Square and Narrow ILM configurations, matching the Goshyda compatibility. It is designed for 2U cases requiring compact, high-speed replacement cooling. You can use this if you need a standard server solution without specific OEM branding. It provides similar active cooling performance for enterprise workloads. The choice depends on availability and specific mounting hardware preferences. It serves users who need a reliable, high-speed air cooler for LGA 2011 sockets in constrained server chassis environments.
Supermicro 2U Server Heatsink
The Supermicro SNK-P0048AP4 is the original OEM component for X9 servers. It weighs ten pounds, which is substantial compared to lighter aftermarket units. It supports LGA 2011 sockets and 2U server height. This cooler provides the necessary thermal headroom for dual-processor systems using Intel Xeon E5 chips. You should pick this if you are replacing a failed unit in a Supermicro X9 server. It ensures exact compatibility with the original system design. It is the correct component for maintaining enterprise-grade stability in specific Supermicro platforms without modification.
Dynatron 2U Active Aluminum SP3 Heatsink
The Dynatron A26 supports AMD EPYC SP3 sockets, not LGA 2011. It is a 2U active aluminum heatsink measuring 4.5 by 6 by 5 inches. It weighs one pound. This option is for AMD EPYC SP3 builds needing compact active cooling. You cannot use it for LGA 2011 systems. It prioritizes socket compatibility and form factor over premium materials. Choose this only if your server uses AMD EPYC processors. It offers a practical solution for SP3 platforms in 2U chassis, providing active cooling for a different processor family entirely.
Dynatron 2U Active CPU Cooler
The Seasonic B13 is a 2U active cooler designed for limited height chassis. It measures 3.15 by 2.6 by 4.25 inches. It fits 2U server chassis with height constraints. You should consider this if you need a direct replacement for OEM server cooling in tight spaces. It supports active cooling methods suitable for enterprise environments. Check socket compatibility carefully, as it may not support LGA 2011 directly. It is a practical choice for users needing compact cooling solutions in constrained server builds where vertical space is limited.
Quick picks
Our 7 picks
Goshyda 2U Active LGA2011 Server Heatsink
Best for: 2U server systems with LGA2011 narrow ILM sockets
- Socket Compatibility
- Socket LGA2011 /Narrow ILM
- Server Height
- 2U
- Cooling Method
- Active
- Compatible Device
- Xeon processor E5 2600 series
- Features
- Fan
- Dimensions
- 0.39 × 0.39 × 0.39 inches
View on Amazon: Goshyda 2U Active LGA2011 Server Heatsink Affiliate link
This is a 2U active CPU heatsink designed for LGA2011 sockets with narrow ILM mounting. It supports Intel Xeon E5 2600 series processors, including v2 and v3 models. The unit features a fan running at 8400 RPM for rapid heat dissipation. Its compact dimensions make it suitable for server chassis requiring strict height limits. You get the necessary tools for installation, allowing for straightforward DIY assembly in compatible systems.
Pros
- Supports LGA2011 socket with narrow ILM mounting
- Compatible with Xeon E5 2600 series processors
- Fan speed reaches 8400 RPM for fast cooling
- Includes installation tools for DIY setup
Cons
- Fan speed is fixed at 8400 RPM with no variable control
- Dimensions listed as 0.39 inches in width, height, and length appear incorrect or incomplete
- No software control or monitoring features included
Good fit if
- You need a replacement cooler for a 2U server chassis
- You are using an Intel Xeon E5 2600 series CPU
- You require a direct replacement for the Supermicro SNK-P0048AP4
Skip if
- You need adjustable fan speeds for noise control
- You are using a consumer socket like LGA1700 or AM5
- You require software-based thermal monitoring
Verdict: Goshyda P0048AP4 2U Active LGA2011 Cooler is a direct replacement for the Supermicro SNK-P0048AP4, offering 8400 RPM cooling for Xeon E5 2600 series processors in 2U server cases. It fits users who need a standard active cooler with included mounting hardware.
Supermicro SNK-P0051AP4 LGA2011 Active Cooler
Best for: 4U chassis with Xeon E3-1200 CPUs
- Socket Compatibility
- LGA1150, LGA1155
- Material
- Copper Base, Aluminum Fins, Heat Pipes
- Server Height
- 4U
- Cooling Method
- Active
- Dimensions
- 7.48 x 4.72 x 5.51 inches
- Mounting Type
- Back Plate, Springs, Screws
View on Amazon: Supermicro SNK-P0051AP4 LGA2011 Active Cooler Affiliate link
This Supermicro SNK-P0051AP4 is a 4U active cooler designed for Intel Xeon E3-1200 processors on LGA1150 and LGA1155 sockets. It uses a copper base, aluminum fins, and heat pipes for efficient heat transfer. The unit measures 7.48 inches wide and weighs 2 pounds. It includes a front-mounted fan and a back plate mounting kit. This cooler suits servers requiring robust thermal management for specific Xeon platforms.
Pros
- Copper base with aluminum fins and heat pipes
- Supports Intel Xeon E3-1200/v2/v3 processors
- Includes back plate and spring mounting hardware
- Front-mounted active cooling fan
Cons
- 4U height is too large for standard 2U server chassis
- Only compatible with LGA1150 and LGA1155 sockets
- Heavier at 2 pounds than typical 2U alternatives
Good fit if
- You need a cooler for a 4U server chassis
- You use Intel Xeon E3-1200 series CPUs
- You require LGA1150 or LGA1155 socket support
Skip if
- You have a 2U server chassis
- You use LGA2011 or LGA1356 sockets
- You need a compact low-profile cooler
Verdict: Supermicro 4U Xeon CPU Cooler is a specialized solution for 4U chassis and older Xeon platforms. It fits users with specific socket needs and ample vertical space, but it is unsuitable for standard 2U systems or modern LGA2011 builds.
Sunydog LGA 2011 2U Active CPU Cooler
Best for: Budget LGA 2011 server replacement cooling
- Socket Compatibility
- LGA2011
- Server Height
- 2U
- Cooling Method
- Active
- Fan Size
- 8400 RPM
View on Amazon: Sunydog LGA 2011 2U Active CPU Cooler Affiliate link
This Sunydog heatsink provides active cooling for LGA 2011 processors in a 2U server chassis. It features a fan spinning at 8400 RPM for rapid heat dissipation. The unit supports E5-2600 series, v2, and v3 CPUs. It includes all necessary tools for DIY installation. Its compact design aids in storage and transport while maintaining system stability.
Pros
- 8400 RPM fan speed for fast heat dissipation
- Compatible with LGA 2011 Square/Narrow ILM sockets
- Supports E5-2600, v2, and v3 processor series
- Includes all tools for DIY installation
Cons
- High 8400 RPM fan speed may generate noticeable noise
- Generic Sunydog brand lacks established server-grade reputation
- No specific thermal performance data (Watts) provided
Good fit if
- You need a replacement cooler for an LGA 2011 server
- You are comfortable with DIY assembly using included tools
- You require high airflow for E5-2600 v2 or v3 CPUs
Skip if
- You require silent operation in a quiet environment
- You prefer a known OEM brand like Supermicro
- You need verified thermal wattage specifications
Verdict: Sunydog 2U LGA2011 Active Cooler offers high-speed airflow for budget-conscious server builds. It suits technicians replacing failed units in LGA 2011 systems who prioritize raw cooling power over brand prestige.
Phefop 2U Active LGA 2011 CPU Cooler
Best for: 2U server builds needing LGA2011 Square ILM cooling
- Socket Compatibility
- LGA2011 Square and Narrow ILM
- Server Height
- 2U
- Cooling Method
- Active
- Compatible Device
- CPU
- Mounting Type
- mounting screws
View on Amazon: Phefop 2U Active LGA 2011 CPU Cooler Affiliate link
This Phefop cooler is built for LGA2011 Square and Narrow ILM sockets in 2U server chassis. It uses a 1 x 8400 RPM fan with a 4-pin PWM connector for active cooling. The unit stands 65mm tall and is 80mm wide. It includes pre-applied thermal paste and mounting screws. You get a compact solution that fits tight spaces while maintaining stability under load.
Pros
- Supports LGA2011 Square and Narrow ILM sockets
- Features a high-speed 8400 RPM fan
- Includes pre-applied thermal interface material
- Compact 65mm height fits 2U cases
Cons
- Narrow 80mm width may limit airflow compared to wider alternatives
- Fan speed is fixed at 8400 RPM with no variable control listed
- No explicit noise rating provided in specifications
Good fit if
- You need a replacement for a failed SNK-P0048AP4 unit
- You are installing in a tight 2U server chassis
- You want pre-applied thermal paste for easier setup
Skip if
- You require a cooler for LGA1356 sockets
- You need a wider heatsink for better thermal headroom
- You prefer silent operation with lower RPM fans
Verdict: Phefop 2U LGA2011 Active Cooler offers a direct fit for LGA2011 Square and Narrow ILM processors in 2U cases. It suits users who need a compact, high-speed replacement for standard server cooling solutions.
Supermicro 2U Server Heatsink
Best for: replacing stock cooling in Supermicro X9 servers
- Socket Compatibility
- LGA2011 or LGA1356
- Server Height
- 2U+
- Compatible Device
- intel Xeon E5-2600 and E5-2400 Series
- Mounting Type
- Screws & Springs
- System Type
- Server
- Weight
- 10 pounds
View on Amazon: Supermicro 2U Server Heatsink Affiliate link
This Supermicro heatsink is built for 2U server chassis and supports LGA2011 and LGA1356 sockets. It uses screws and springs for mounting, including brackets for both square and narrow ILMs. The unit weighs 10 pounds and is designed for Intel Xeon E5-2600 and E5-2400 series processors. You need this cooler if you are maintaining a dual-processor server environment requiring robust thermal management for high-end workstation chips.
Pros
- Compatible with LGA2011 and LGA1356 sockets
- Includes screws, springs, and mounting brackets
- Supports Intel Xeon E5-2600 and E5-2400 series
- Fits 2U+ server chassis specifications
Cons
- Heavy 10-pound build limits portability
- Designed strictly for server applications
- Requires specific mounting hardware for installation
Good fit if
- You need a replacement for a Supermicro X9 server
- You use LGA2011 or LGA1356 sockets
- You require cooling for Xeon E5 processors
Skip if
- You are building a standard desktop PC
- You use consumer sockets like LGA1700 or AM5
- You need a low-profile cooler for small cases
Verdict: Supermicro SNK-P0048AP4 2U Server Cooler is the correct component for replacing failed cooling units in Supermicro X9 servers. It fits dual-processor systems using Intel Xeon E5 chips and provides the necessary thermal headroom for enterprise workloads.
Dynatron 2U Active Aluminum SP3 Heatsink
Best for: AMD EPYC SP3 2U active cooling
- Socket Compatibility
- Socket SP3
- Material
- Aluminum
- Server Height
- 2U
- Cooling Method
- Active
- Compatible Device
- AMD EPYC
- Dimensions
- 5 × 4.5 × 6 inches
View on Amazon: Dynatron 2U Active Aluminum SP3 Heatsink Affiliate link
The Dynatron A26 is a 2U active aluminum heatsink designed for AMD EPYC processors using the SP3 socket. It features embedded heatpipes for efficient heat transfer. The unit measures 4.5 inches wide, 5 inches long, and 6 inches high, weighing 1 pound. This cooler suits users needing a compact, server-grade cooling solution for specific AMD EPYC workloads.
Pros
- Compatible with AMD EPYC SP3 socket
- Active cooling with embedded heatpipes
- Compact 2U form factor
- Lightweight aluminum construction at 1 pound
Cons
- Limited to SP3 socket compatibility
- Aluminum material may offer lower thermal mass than copper
- No fan speed control mentioned in specifications
Good fit if
- You are building an AMD EPYC SP3 server
- You need a 2U active cooler
- You prioritize lightweight aluminum construction
Skip if
- You use an Intel LGA2011 socket
- You require copper heatpipe construction
- You need variable fan speed control
Verdict: The Dynatron A26 2U Active Aluminum Heatsink fits AMD EPYC SP3 builds needing a compact, lightweight 2U active cooler. It is a practical choice for users prioritizing socket compatibility and form factor over premium materials.
Dynatron 2U Active CPU Cooler
Best for: 2U server chassis with LGA2011 sockets
- Server Height
- 2U
- Cooling Method
- Active
- Dimensions
- 3.15 x 2.6 x 4.25 inches
View on Amazon: Dynatron 2U Active CPU Cooler Affiliate link
The Seasonic B13 is a 2U active CPU cooler designed for server environments. It measures 4.25 inches in length, 3.15 inches in width, and 2.6 inches in height. This compact aluminum heatsink fits standard 2U chassis slots. You will find it suitable for LGA2011 and similar server sockets that require low-profile active cooling solutions.
Pros
- 2U form factor for server chassis compatibility
- Active cooling with integrated fan
- Compact dimensions: 4.25 x 3.15 x 2.6 inches
Cons
- No socket compatibility details listed in specifications
- No fan speed or noise level specifications provided
- Limited to 2U height constraint
Good fit if
- You need a 2U active cooler for a server build
- You require a compact heatsink for LGA2011 systems
- You are replacing a failed OEM server cooler
Skip if
- You need a cooler for consumer desktop motherboards
- You require specific fan speed control specifications
- You need a non-2U low-profile solution
Verdict: Seasonic B13 2U Active CPU Cooler fits 2U server chassis with limited height. It suits users needing a direct replacement for OEM server cooling. Check socket compatibility before purchase.
Specifications side by side
| Spec | Goshyda 2U Active LGA2011 Server Heatsink | Supermicro SNK-P0051AP4 LGA2011 Active Cooler | Sunydog LGA 2011 2U Active CPU Cooler | Phefop 2U Active LGA 2011 CPU Cooler | Supermicro 2U Server Heatsink | Dynatron 2U Active Aluminum SP3 Heatsink | Dynatron 2U Active CPU Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | Socket LGA2011 /Narrow ILM | LGA1150, LGA1155 | LGA2011 | LGA2011 Square and Narrow ILM | LGA2011 or LGA1356 | Socket SP3 | not stated |
| Material | not stated | Copper Base, Aluminum Fins, Heat Pipes | not stated | not stated | not stated | Aluminum | not stated |
| Server Height | 2U | 4U | 2U | 2U | 2U+ | 2U | 2U |
| Cooling Method | Active | Active | Active | Active | not stated | Active | Active |
| Compatible Device | Xeon processor E5 2600 series | not stated | not stated | CPU | intel Xeon E5-2600 and E5-2400 Series | AMD EPYC | not stated |
| Fan Size | not stated | not stated | 8400 RPM | not stated | not stated | not stated | not stated |
| Dimensions | not stated | 7.48 x 4.72 x 5.51 inches | not stated | not stated | not stated | not stated | 3.15 x 2.6 x 4.25 inches |
| Mounting Type | not stated | Back Plate, Springs, Screws | not stated | mounting screws | Screws & Springs | not stated | not stated |
| System Type | not stated | not stated | not stated | not stated | Server | not stated | not stated |
| Features | Fan | Fan | not stated | not stated | not stated | not stated | not stated |
| Weight | not stated | 2 pounds | not stated | not stated | 10 pounds | 1 pounds | not stated |
| Color | default | not stated | not stated | not stated | not stated | not stated | Multicolor |
| Model | GOSHYDAsehw4gia2n154 | SNK-P0051AP4 | Sunydog3elo2w9gdj | Phefopqyin4dreva | NA | A26 | B13 |
Frequently asked questions
Can I use the Goshyda P0048AP4 in a 4U chassis?
Yes, you can install it in larger cases, but it is designed for 2U server systems. The cooler fits LGA 2011 narrow ILM sockets and runs at 8400 RPM. If you have a 4U chassis, consider the Supermicro SNK-P0051AP4 instead. That unit is built specifically for 4U space and supports Xeon E3-1200 CPUs.
Does the Sunydog LGA 2011 cooler include a fan?
The data lists this as an active cooling solution, which implies it uses a fan. It is designed for budget-conscious server builds requiring high-speed airflow. It serves as a replacement for failed units in LGA 2011 systems. You should verify the specific fan model included with your purchase for RPM details.
Is the Dynatron A26 compatible with Intel Xeon processors?
No, the Dynatron A26 is built for AMD EPYC SP3 sockets. It is a 2U active aluminum heatsink designed for AMD platforms. It does not support LGA 2011 or other Intel sockets. You must choose a cooler explicitly labeled for LGA 2011 if you are using an Intel Xeon processor.
What is the weight of the Supermicro 2U Server Heatsink?
The Supermicro 2U Server Heatsink weighs 10 pounds. This component is the correct replacement for failed cooling units in Supermicro X9 servers. It supports dual-processor systems using Intel Xeon E5 chips. The heavy weight reflects its robust construction for enterprise workloads.
Can the Phefop cooler fit Square ILM sockets?
Yes, the Phefop 2U Active LGA 2011 CPU Cooler fits both Square and Narrow ILM processors. It is designed for 2U server cases. This cooler offers a direct fit for standard server cooling solutions. It is a suitable choice for users needing a compact, high-speed replacement.
Does the Seasonic B13 support LGA 2011 sockets?
The product data does not explicitly list socket compatibility for the Seasonic B13. It is described as a 2U active cooler for server chassis with limited height. You must check the socket compatibility before purchase to ensure it fits your specific CPU. The model is B13 and measures 4.25 by 3.15 by 2.6 inches.
What material is the Dynatron A26 heatsink made of?
The Dynatron A26 heatsink is made of aluminum. It is a 2U active cooler designed for AMD EPYC SP3 builds. This material choice prioritizes socket compatibility and form factor over premium materials. It is a practical option for users needing compact active cooling.