Best SCYTHE CPU Coolers: 8 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide covers the best SCYTHE CPU coolers, comparing 8 models ranked by their published specifications. You will find options ranging from low-profile 92mm units to dual-tower designs with six heat pipes. Most models feature black finishes and standard PWM fans, with no RGB lighting included. The top pick is the Scythe Kotetsu 120mm CPU Cooler, which leads because its slim 5.8 cm profile fits standard cases needing a heatsink without blocking RAM. All selections are based strictly on the data provided in the product listings.
Quick picks
Our 8 picks
Scythe Kotetsu 120mm CPU Cooler
Best for: standard cases needing a slim heatsink
- Cooler Height
- 16 cm
- Fan Size
- 120mm
- Features
- Fan
- Dimensions
- 5.12 × 2.28 × 6.3 inches
- Weight
- 1.1 pounds
The Scythe Kotetsu is a single-tower processor air cooler equipped with a 120mm PWM fan. It measures 16 cm (6.3 inches) in height, 13 cm in width, and 5.8 cm in depth, with a total weight of 480 grams. This setup suits you if you need a standard-height cooling solution with a compact 5.8 cm depth that leaves clearance inside standard cases.
Pros
- Includes a 120mm PWM fan for processor cooling
- Slim 5.8 cm (2.28 in) depth minimizes footprint
- Lightweight heatsink design at 480 g (1.10 lb)
Cons
- Height of 16 cm (6.3 in) requires tall case clearance
- Single-fan configuration rather than a dual-fan assembly
Good fit if
- You have a PC chassis with at least 16 cm of cooler clearance.
- You want a lightweight heatsink that weighs under 500 g.
Skip if
- You build inside a compact or slim chassis under 16 cm tall.
- You need a multi-fan or dual-tower cooler out of the box.
Verdict: Scythe Kotetsu 120mm CPU Air Cooler delivers single-tower processor cooling with a 120mm PWM fan and a lightweight 480 g build. Its 16 cm height fits standard chassis layouts while maintaining a slim 5.8 cm profile.
Scythe Kotetsu Mark 2 120mm CPU Cooler
Best for: mid-tower builds needing full RAM clearance
- Socket Compatibility
- LGA1200, LGA1151, AM4, LGA2066
- Cooler Height
- 154 mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1,200 RPM
The Scythe Kotetsu Mark 2 120mm Single Tower Cooler is a single-tower air cooler engineered for mainstream setups. You get a slim heatsink with four 6mm heatpipes and a copper plate base standing 154mm tall, ensuring zero RAM and PCIe slot overhang. A bundled 120mm Kaze Flex PWM fan runs between 300 and 1200 RPM. This compact configuration suits you if you need reliable cooling in standard mid-tower computer cases.
Pros
- Slim heatsink profile avoids RAM and PCIe slot clearance issues
- Four 6mm heatpipes paired with a copper base plate
- 120mm Kaze Flex fluid dynamic bearing fan operates from 300 to 1200 RPM
- Moderate 154mm height fits standard mid-tower enclosures
Cons
- LGA1700 and AM5 platforms are not listed on supported socket list
- Ships with hardware for only a single fan setup
- Fan tops out at 1200 RPM
Good fit if
- You need unrestricted clearance for tall memory modules and upper PCIe cards.
- You are building in a mid-tower chassis with 154mm or more cooler clearance.
- You run a compatible Intel LGA1200/115x or AMD AM4 motherboard.
Skip if
- You need native support for newer Intel LGA1700 or AMD AM5 sockets.
- You plan to run a dual-fan push-pull configuration immediately.
Verdict: Scythe Kotetsu Mark 2 120mm Single Tower Cooler provides solid cooling via four heatpipes while completely preventing memory slot interference. Its 154mm height and quiet 1200 RPM Kaze Flex fan make it a practical pick for compatible mainstream systems.
Scythe Fuma 3 Dual Tower CPU Cooler
Best for: compact dual-tower cooling with tall memory
- Socket Compatibility
- LGA1700, LGA1200, LGA115x, AM4, AM5
- Cooler Height
- 154mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- Color
- Black
The Scythe Fuma 3 is a dual-tower CPU air cooler designed for compact clearance and balanced airflow. Standing 154mm tall, it incorporates six 6mm heat pipes, an asymmetrical fin stack, and two reverse-rotating 120mm fans in 25mm and 15mm thicknesses. You get full front memory clearance and mounting support for modern Intel and AMD platforms. This setup suits you if you need multi-fan dual-tower cooling inside compact mid-tower or Mini-ITX cases.
Pros
- Six 6mm heat pipes and copper base plate
- Compact 154mm height fits smaller cases and Mini-ITX motherboards
- Asymmetrical heatsink design allows unrestricted front RAM clearance
- Dual 120mm fans with 15mm and 25mm profiles rotating in opposite directions
Cons
- Third fan is not included despite bundled extra clips
- Rear memory height is limited to 54mm on supported quad-channel sockets
Good fit if
- You need a dual-tower cooler under 155mm tall for your chassis.
- You use tall memory modules in your front RAM slots.
- You run an Intel LGA 1700/1200/115x or AMD AM5/AM4 processor.
Skip if
- You require two standard 25mm-thick fans included in the box.
- You have rear memory taller than 54mm on LGA 2011 or LGA 2066 boards.
Verdict: Scythe Fuma 3 Dual Tower CPU Air Cooler delivers dual-heatsink cooling performance at a restrained 154mm height while maintaining front RAM clearance. It provides broad socket compatibility and reverse-airflow dual fans for tight spaces.
Scythe Wonder Tornado 120mm PWM Fan
Best for: case airflow replacement
- Color
- Black
- Features
- Fan
- Dimensions
- 4.72 × 1.02 × 4.72 inches
This is a case fan, not a CPU air cooler. It features a 120mm size with a 25mm thickness and a Fluid Dynamic Bearing rated for 120,000 hours. The design uses nine optimized blades for high static pressure and airflow. You should look at the Scythe Kotetsu or Fuma 3 models for actual CPU cooling. This fan is only useful if you need to replace a case fan.
Pros
- 120mm x 25mm form factor
- Fluid Dynamic Bearing for longevity
- 9-optimized blade design for airflow
- PWM control support
Cons
- Not a CPU cooler
- Requires separate fan controller
- No included mounting hardware for CPU
Good fit if
- You need a high-static pressure case fan
- You want a quiet 120mm PWM fan
- You are building a case airflow system
Skip if
- You need a CPU air cooler
- You are looking for a tower heatsink
- You want a complete cooling solution
Verdict: Scythe Wonder Tornado 120mm PWM Fan is a component fan, not a processor cooler. You should buy the Scythe Fuma 3 instead if you need to cool your CPU.
Scythe Mugen 6 Black Edition Dual Fan Cooler
Best for: dual-fan cooling on modern AMD and Intel sockets
- Heat Pipes
- 6
- Color
- Black
- Features
- Fan
- Dimensions
- 3.94 × 1.97 × 0.5 inches
- Weight
- 3.86 pounds
View on Amazon: Scythe Mugen 6 Black Edition Dual Fan Cooler
The Scythe Mugen 6 Black Edition Dual Fan Cooler is a side-flow air cooler featuring six 6 mm heat pipes and two included fans. You get broad socket support spanning AMD AM4 and AM5 alongside Intel LGA 1700, 1200, 115x, and older high-end desktop platforms like 2066. Weighing 3.86 pounds in an all-black finish, this dual-fan model suits builders needing direct socket coverage across modern and legacy processors without excess lighting.
Pros
- Six 6 mm diameter heat pipes
- Dual-fan configuration
- Supports Intel LGA 1700, 1200, 115x, and 2011/2066 sockets
- Compatible with AMD AM4 and AM5
Cons
- Heavier build at 3.86 pounds
- One-year warranty period
- No RGB lighting included
Good fit if
- You need a dual-fan cooler with six 6 mm heat pipes.
- You run an Intel LGA 1700, LGA 2066, or AMD AM5 processor.
- You prefer an all-black side-flow heatsink design.
Skip if
- You require integrated RGB lighting.
- You want a warranty longer than one year.
- You need a lightweight heatsink under three pounds.
Verdict: Scythe Mugen 6 Black Edition Dual Fan Cooler provides dual fans, six 6 mm heat pipes, and extensive socket coverage across AMD and Intel builds. It delivers a solid all-black thermal option if you do not require lighting or extended warranty terms.
SCYTHE Shuriken 3 92mm Low-Profile Cooler
Best for: ultra-compact small form factor PC builds
- Socket Compatibility
- AM5, LGA1700
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Dimensions
- 3.7 × 3.6 × 1.5 inches
- Weight
- 1.06 pounds
The SCYTHE Shuriken 3 is a compact air cooler built for small form factor systems. At 1.5 inches tall with a 92mm custom fan, it delivers zero interference for your RAM modules and PCIe slots. Its reflow-soldered fins and heat pipes fit LGA 1700 and AM5 sockets. You will find this cooler ideal if you need a low-profile heatsink that fits extremely tight enclosures without blocking nearby motherboard components.
Pros
- Low 1.5-inch total height for slim cases
- Zero clearance interference with RAM and PCIe slots
- Reflow-soldered fin and heat pipe construction
- Custom 92mm fan with hollowed pressure-relief frame
Cons
- Socket compatibility limited to AM5 and LGA 1700
- Smaller 92mm fan diameter than standard tower coolers
Good fit if
- You build in a slim case requiring a 1.5-inch cooler height.
- You need guaranteed clearance for tall memory modules and PCIe cards.
- You use an Intel LGA 1700 or AMD AM5 processor socket.
Skip if
- You use an older socket not listed in the specifications.
- You have space for a larger 120mm tower cooler.
Verdict: SCYTHE Shuriken 3 92mm Low-Profile Cooler fits tight small-form-factor builds with its 1.5-inch height and guaranteed RAM clearance. It gives modern AM5 and LGA 1700 systems a compact thermal solution without component overhang.
Scythe Magoroku Dual-Tower CPU Cooler
Best for: high-airflow AM4 and AM5 desktop builds
- Socket Compatibility
- LGA1700, LGA1151, LGA1851, AM5, AM4
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- Fan Speed
- 2,000 RPM
- Features
- Fan
The Scythe Magoroku is a dual-tower air cooler designed for AMD and Intel sockets, including AM4 and LGA1700. It features six 6mm heat pipes and two 120mm fans running up to 2,000 RPM. The straight vertical fin layout exhausts heat directly, while adjustable fan mounts clear your RAM modules. If you need robust multi-socket cooling inside a case with at least 6.06 inches of vertical clearance, this setup fits your build.
Pros
- Dual 120mm fans operating up to 2,000 RPM
- Six 6mm heat pipes with straight vertical tower fins
- Adjustable fan positioning to maintain RAM clearance
- Long fan lifespan rated at 370,000 hours MTTF
Cons
- Height of 6.06 inches limits compatibility with compact cases
- Compatibility list omits unlisted sockets such as LGA 1200
Good fit if
- You run an AMD AM4 or AM5 processor requiring dual-tower heat dissipation.
- You have a PC case that supports coolers at least 6.06 inches tall.
- You need adjustable fan height to accommodate taller memory modules.
Skip if
- You build in a low-profile chassis unable to fit a 6.06-inch tower.
- You use an unsupported legacy socket not listed in the specifications.
Verdict: Scythe Magoroku Dual Tower CPU Air Cooler provides dual-fan airflow and six heat pipes for AM4 and AM5 processors. Its 6.06-inch height and adjustable fan positioning deliver high heat dissipation while maintaining RAM clearance.
Scythe Fuma 3 Twin Tower CPU Cooler
Best for: compact twin-tower builds needing memory clearance
- Socket Compatibility
- AM4, AM5, LGA1700, 1200, 2011, 2066
- Cooler Height
- 154 mm
- Heat Pipes
- 6
- Tower Design
- Twin Tower
- Features
- Fan
- Dimensions
- 5.43 × 5.04 × 6.06 inches
The Scythe Fuma 3 is a twin-tower air cooler featuring six 6 mm heat pipes and two counter-rotating fans. Its 154 mm height fits cases with tighter clearances, while the offset fin stack and 15 mm slim front fan prevent interference with motherboard components and memory slots. If you build on modern Intel or AMD platforms and need dual-heatsink cooling that preserves component clearance, this unit suits your setup.
Pros
- Six 6 mm heat pipes across a dual-tower heatsink
- Low 154 mm overall height for broad chassis compatibility
- Counter-rotating dual-fan design for targeted airflow
- Offset layout with slim 15 mm front fan avoids board clearance issues
Cons
- Uses a slim 15 mm front fan rather than a full-depth 25 mm fan
- No RGB or LED lighting listed in specifications
Good fit if
- You need a dual-tower cooler that stays at or under 154 mm tall.
- You want an offset fin design and slim fan to clear motherboard components.
- You build on an Intel LGA1700 or AMD AM5 socket platform.
Skip if
- You require integrated RGB lighting elements.
- You prefer full-thickness 25 mm fans across all heatsink positions.
Verdict: Scythe Fuma 3 Twin Tower CPU Cooler delivers dual-tower dissipation within a compact 154 mm height profile. Its offset heatsink and counter-rotating fan layout maintain clearance around your motherboard without sacrificing multi-pipe coverage.
Specifications side by side
| Spec | Scythe Kotetsu 120mm CPU Cooler | Scythe Kotetsu Mark 2 120mm CPU Cooler | Scythe Fuma 3 Dual Tower CPU Cooler | Scythe Wonder Tornado 120mm PWM Fan | Scythe Mugen 6 Black Edition Dual Fan Cooler | SCYTHE Shuriken 3 92mm Low-Profile Cooler | Scythe Magoroku Dual-Tower CPU Cooler | Scythe Fuma 3 Twin Tower CPU Cooler |
|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | LGA1200, LGA1151, AM4, LGA2066 | LGA1700, LGA1200, LGA115x, AM4, AM5 | not specified | not specified | AM5, LGA1700 | LGA1700, LGA1151, LGA1851, AM5, AM4 | AM4, AM5, LGA1700, 1200, 2011, 2066 |
| Cooler Height | 16 cm | 154 mm | 154mm | not specified | not specified | not specified | not specified | 154 mm |
| Heat Pipes | not specified | 4 | 6 | not specified | 6 | not specified | 6 | 6 |
| Tower Design | not specified | Single-Tower | Dual-Tower | not specified | not specified | Low-Profile | Dual-Tower | Twin Tower |
| Fan Size | 120mm | 120 mm | 120mm | not specified | not specified | 92mm | 120mm | not specified |
| Fan Speed | not specified | 1,200 RPM | not specified | not specified | not specified | not specified | 2,000 RPM | not specified |
| Color | not specified | Noir | Black | Black | Black | not specified | not specified | Black |
| Features | Fan | not specified | not specified | Fan | Fan | not specified | Fan | Fan |
| Dimensions | 5.12 × 2.28 × 6.3 inches | 6.06 × 5.12 × 3.27 inches | 8 × 7 × 6 inches | 4.72 × 1.02 × 4.72 inches | 3.94 × 1.97 × 0.5 inches | 3.7 × 3.6 × 1.5 inches | 3.93 × 3.93 × 6.06 inches | 5.43 × 5.04 × 6.06 inches |
| Weight | 1.1 pounds | 1.42 pounds | 3.6 pounds | not specified | 3.86 pounds | 1.06 pounds | not specified | not specified |
| Model | FBA_4571225054094 | SCKTT-2000 | SCFM-3000 | WT1225FD20-P | SCMG-6000DBE | SCSK-3000 | SCMR-1000 | SCFM-3000 |
The SCYTHE lineup at a glance
The brand offers distinct thermal solutions based on your chassis and memory needs. The Scythe Fuma 3 Dual Tower and Scythe Magoroku Dual-Tower provide high airflow for AM4 and AM5 builds, while the Scythe Kotetsu 120mm suits standard cases with its slim profile. These models prioritize heat dissipation through multiple heat pipes and dual fans. If you require RAM clearance, the offset design of the Fuma 3 Twin Tower helps maintain space around your memory slots. For compact small-form-factor PCs, the Scythe Shuriken 3 92mm Low-Profile Cooler fits tight spaces without overhang. The Scythe Mugen 6 Black Edition offers dual-fan cooling for modern sockets. Note that the Scythe Wonder Tornado 120mm PWM Fan is a component fan, not a processor cooler.
Where Scythe fits your build
Scythe covers the full size spectrum. You can choose a 92mm low-profile unit for tight cases or a dual-tower design for high airflow. All listed coolers use black finishes. None offer RGB lighting or white color options. The range includes single and dual tower heatsinks. You will not find liquid cooling or AIO pumps here. The brand focuses on air cooling for standard and compact chassis. If you need silent operation, the Kotetsu Mark 2 offers a quiet fan. For modern sockets, the Mugen 6 and Magoroku provide broad compatibility. This brand suits users who prioritize compact dimensions and straightforward thermal performance.
You can compare cooler height limits against the best PC cases for CPU Cooler to ensure clearance.
How to Choose the Right One
-
Check Socket Compatibility
Ensure the cooler supports your specific motherboard socket before purchasing. The Scythe Mugen 6 Black Edition and Scythe Magoroku Dual-Tower cover both AM5 and LGA 1700 sockets. This broad compatibility makes them suitable for modern AMD and Intel builds. If you use an older AM4 processor, the Magoroku remains a viable option. Always verify the socket list in the specifications to avoid installation issues. Matching the cooler to your CPU socket is the first step in ensuring proper thermal contact and secure mounting.
-
Consider Tower Design
Tower design affects cooling capacity and case fitment. Single tower models like the Scythe Kotetsu 120mm offer a slim profile for standard cases. Dual tower designs, such as the Scythe Fuma 3 Dual Tower, provide higher heat dissipation for demanding processors. The Scythe Magoroku also uses a dual-tower layout with six heat pipes for maximum airflow. Choose a single tower if space is limited. Select a dual tower if you need superior cooling performance for high-end CPUs in a compatible mid-tower or full-tower chassis.
-
Verify Case Clearance
Measure your case to ensure the cooler fits without blocking other components. The Scythe Kotetsu Mark 2 has a height of 6.06 inches, which clears most standard RAM modules. The Scythe Fuma 3 Dual Tower also stands at 6 inches tall. For small form factor builds, the Scythe Shuriken 3 Low-Profile Cooler is only 1.5 inches high. This compact size guarantees RAM clearance in tight spaces. Always compare the cooler height against your case specifications to prevent physical interference during installation.
-
Evaluate Fan Size
Fan size influences noise levels and airflow efficiency. The Scythe Kotetsu 120mm and Scythe Wonder Tornado use 120mm fans, which move more air at lower speeds for quieter operation. The Scythe Shuriken 3 uses a 92mm fan, which is necessary for low-profile constraints. Larger fans generally provide better cooling performance with less noise. Smaller fans may run louder to achieve similar airflow. Choose a fan size that balances your thermal requirements with your acoustic preferences.
-
Assess Heat Pipe Count
The number of heat pipes impacts how quickly heat moves away from the CPU. The Scythe Kotetsu Mark 2 utilizes four heat pipes for efficient thermal transfer. The Scythe Magoroku Dual-Tower features six heat pipes, enhancing its ability to handle high heat loads. More heat pipes generally improve cooling performance, especially in dual-tower designs. Check the specifications for the heat pipe count to gauge the cooler's potential. This spec is a key indicator of the cooler's thermal capacity and efficiency.
-
Check RAM Clearance
Tall RAM modules can interfere with cooler installation. The Scythe Kotetsu Mark 2 is designed to prevent memory slot interference, ensuring compatibility with high-profile memory. The Scythe Fuma 3 Dual Tower also maintains front RAM clearance with its offset design. The Scythe Shuriken 3 Low-Profile Cooler guarantees clearance in small builds. If you use tall RGB RAM, verify the cooler's clearance specifications. This prevents the need to remove memory during installation and ensures a clean build.
Frequently asked questions
Which Scythe CPU cooler is best for standard cases?
The Scythe Kotetsu 120mm is the top pick for standard chassis layouts. It features a slim 5.8 cm profile and a 120mm PWM fan. Its lightweight 480 g build ensures it fits easily into most mid-tower cases without obstructing surrounding components.
Does the Scythe Kotetsu Mark 2 interfere with RAM?
No, the Scythe Kotetsu Mark 2 is designed to prevent memory slot interference. It offers full RAM clearance, making it ideal for mid-tower builds. The cooler uses four heatpipes and a quiet 1200 RPM Kaze Flex fan for effective cooling.
What is the best Scythe cooler for AM5 sockets?
The Scythe Magoroku Dual-Tower is the best choice for high-airflow AM5 builds. It supports AM4 and AM5 sockets with six heat pipes and dual fans. Its 6.06-inch height and adjustable fan positioning deliver strong heat dissipation while maintaining RAM clearance.
Is the Scythe Fuma 3 a dual-tower cooler?
Yes, the Scythe Fuma 3 is a dual-tower CPU air cooler. It delivers dual-heatsink performance at a restrained 154mm height. The unit includes reverse-airflow dual fans and supports AM5, LGA 1700, and LGA 1151 sockets for tight spaces.
Which Scythe model is suitable for small form factor builds?
The Scythe Shuriken 3 92mm Low-Profile Cooler is ideal for ultra-compact SFF builds. It has a minimal 1.5-inch height and guarantees RAM clearance. It supports modern AM5 and LGA 1700 systems without causing component overhang in tight cases.
Does the Scythe Mugen 6 have RGB lighting?
The Scythe Mugen 6 Black Edition does not include RGB lighting. It provides dual fans and six 6mm heat pipes for solid all-black thermal performance. It covers extensive socket compatibility across AMD and Intel builds for users who do not require lighting.
What is the Scythe Wonder Tornado?
The Scythe Wonder Tornado is a 120mm PWM component fan, not a processor cooler. It is designed for case airflow replacement. If you need to cool your CPU, you should purchase the Scythe Fuma 3 instead for dedicated thermal management.