SCYTHE Magoroku Dual-Tower CPU Cooler Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This scythe magoroku full straight up review covers a dual-tower air cooler built for modern sockets. It uses six 6mm heat pipes to move heat from the CPU to the aluminum fins. Two 120mm fans spin at 2,000 RPM to push air through the towers. The design features straight vertical fins that exhaust heat immediately without retention. This cooler supports Intel LGA1700, LGA1151, LGA1851 and AMD AM5, AM4. It measures 3.93 inches wide and 6.06 inches tall. The mounting system ensures optimal contact pressure for latest CPUs.
What stands out
- Six 6mm heat pipes for efficient thermal transfer
- Straight vertical fins exhaust heat without retention
- Dual 120mm fans spin at 2,000 RPM
- Adjustable fan positioning optimizes airflow across fins
- H.P.M.S. VII mounting for LGA1700 and AM5
Who it fits
Good fit for
You should consider this cooler if you use an Intel LGA1700 or AMD AM5 processor and need reliable dual-tower cooling. The adjustable fan position helps if your RAM modules are tall, as you can move the fans up to avoid interference. The straight fin design is ideal for cases where you want heat exhausted directly away from the CPU area. The 370,000 hour MTTF rating suits users who want long-term reliability without frequent maintenance.
Who should skip it
Skip this option if your case cannot accommodate a 6.06 inch height. The dual-tower design is large and may block nearby components or restrict airflow in small form factor builds. If you need RGB lighting or software control, this model does not list those features. Users seeking ultra-quiet operation below 2,000 RPM may find the fixed fan speed too loud for their preferences. It is not suitable for liquid cooling enthusiasts.
Verdict: This is a practical, spec-driven air cooler for standard ATX builds with modern sockets. It offers solid thermal performance through its dual-tower design and adjustable fans.
Key specs explained for Magoroku
Fan Size: 120mm
This size is the standard for most mid-tower cases. You can easily find replacement fans if one fails. Larger fans move more air at lower speeds, which usually means less noise. Smaller 140mm fans are quieter but require more space. You should check your case dimensions before buying to ensure these fit without blocking other components.
Fan Speed: 2,000 RPM
This speed indicates how fast the fan blades rotate each minute. Higher speeds push more air through the fins, improving cooling performance. However, they also increase noise levels. You will get better airflow than with slower fans, but expect more sound. Compare this to 1,500 RPM models if you prioritize silence over maximum cooling power.
Heat Pipes: 6
These copper tubes transfer heat from the CPU base to the aluminum fins. Six pipes provide a larger surface area for heat dissipation compared to four-pipe designs. This helps handle higher thermal loads from modern processors. You should look for this count when comparing dual-tower coolers. More pipes generally mean better heat spreading across the fin stack.
Tower Design: Dual-Tower
This design features two separate fin stacks with fans blowing between them. It offers significantly more cooling capacity than single-tower units. You benefit from lower temperatures under heavy loads. The trade-off is increased height and weight. Ensure your case supports this height, and check for clearance with tall RAM modules on either side of the CPU socket.
Design and build of Magoroku
The Scythe Magoroku features a dual-tower layout with straight vertical fins. The listing notes there is no fastback design. This choice ensures heat exhausts immediately from the CPU. It prevents heat from lingering in the fin structure. The cooler uses six 6mm heat pipes for thermal transfer. These pipes connect the base to the aluminum towers. This configuration aims for efficient dissipation under load.
Dimensions matter for case fit. The unit measures 3.93 inches in width and length. The height reaches 6.06 inches. You must check your case clearance before installation. The open fin gap below the RAM modules allows adjustable fan positioning. You can move the fans up or down. This helps optimize airflow across the fins. It also supports swapping in more powerful fans later.
Mounting relies on the Hyper Precision Mounting System VII. According to the listing, this system provides optimal contact pressure. It supports Intel LGA1700, LGA1151, LGA1851, and AMD AM5 and AM4 sockets. The fans are rated for 370,000 hours of operation. This MTTF figure suggests long-term reliability. The design includes anti-vibration pads to minimize noise transmission. The finish and build prioritize function over aesthetics, targeting users who need reliable cooling for modern processors.
Setup and everyday use
Installation relies on the Hyper Precision Mounting System VII. This hardware provides optimal contact pressure for modern processors. The cooler supports Intel LGA1700, LGA1151, LGA1851 and AMD AM5, AM4 sockets. You should verify your motherboard socket before beginning the process. The mounting mechanism is designed for straightforward attachment to these specific platforms.
Daily operation involves managing airflow and physical space. The dual-tower design measures 3.93 inches wide and 6.06 inches tall. You must check your case dimensions to ensure the cooler fits. The open fin gap below the RAM modules is a key feature. You can adjust the fan position up or down. This allows you to optimize airflow across the fins. It also helps avoid interference with tall memory modules.
The included Wonder Tornado 120mm fans spin at 2,000 RPM. The blade-hub ratio is optimized to minimize deformation. This design boosts air pressure while enhancing airflow. Anti-vibration pads are included to minimize sound transmission. The system aims for a balance between performance and noise levels. The fans are rated for 370,000 hours of Mean Time To Failure. This suggests long-term reliability for demanding applications. You can also swap in more powerful fans if needed. This flexibility lets you tune the cooling performance to your specific needs. The straight vertical fins ensure heat exhausts immediately. This prevents heat retention within the fin structure during heavy loads.
Check Case Fit And RAM Clearance
You need to check your case dimensions before buying. The Magoroku is 6.06 inches tall and 3.93 inches wide. Ensure your case has enough height for the dual-tower design. You must also verify RAM clearance. The open fin gap allows you to move the fans up or down. This adjustment helps if your memory modules are tall. You should keep the fans clean to maintain performance. Dust buildup reduces airflow over the six heat pipes. This cooler fits well in mid-tower cases. It suits users who need strong cooling for Intel LGA1700 or AMD AM5 platforms. It is a practical choice if you prioritize vertical airflow. You do not need a pump or water block. This air cooler is a direct replacement for stock units. It works alongside other air coolers in this guide. Choose it if you want reliable, passive cooling without liquid risks.
Check before you buy
- Verify case height exceeds 6.06 inches.
- Check RAM height and fan position.
- Confirm socket matches LGA1700 or AM5.
- Ensure side panel fits 3.93 inches width.
The product at a glance
Scythe Magoroku Dual-Tower CPU Cooler
Best for: Modern LGA1851 and AM5 builds
- Socket Compatibility
- LGA1700, LGA1151, LGA1851, AM5, AM4
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- Fan Speed
- 2,000 RPM
- Features
- Fan
View on Amazon: Scythe Magoroku Dual-Tower CPU Cooler Affiliate link
The Scythe Magoroku is a dual-tower air cooler with six 6mm heat pipes and two 120mm fans. It supports LGA1700, LGA1851, AM5, and AM4 sockets. The straight fin design exhausts heat immediately. Adjustable fan positioning helps clear RAM modules. The fans spin up to 2,000 RPM. This cooler suits users who need strong thermal performance and broad socket compatibility for modern builds.
Pros
- Dual-tower design with six 6mm heat pipes
- Supports LGA1700, LGA1851, AM5, and AM4 sockets
- Adjustable fan positioning to avoid RAM interference
- Straight vertical fins for immediate heat exhaust
Cons
- No RGB lighting mentioned in specifications
- No fan speed control or PWM details listed
- Limited to 120mm fans for maximum airflow
Good fit if
- You need support for the latest LGA1851 or AM5 sockets
- You have tall RAM that requires adjustable fan placement
- You prefer a straight-fin design for efficient heat exhaust
Skip if
- You require RGB lighting or aesthetic customization
- You are using an older LGA115x socket only
- You need a single-tower compact cooler for small cases
Verdict: Scythe Magoroku Dual Tower Cooler is a practical choice for users building on LGA1851 or AM5 platforms who need reliable cooling and RAM clearance. It fits those who prioritize thermal efficiency over aesthetic features.
Specifications side by side
| Spec | Scythe Magoroku Dual-Tower CPU Cooler |
|---|---|
| Socket Compatibility | LGA1700, LGA1151, LGA1851, AM5, AM4 |
| Heat Pipes | 6 |
| Tower Design | Dual-Tower |
| Fan Size | 120mm |
| Fan Speed | 2,000 RPM |
| Features | Fan |
| Dimensions | 3.93 × 3.93 × 6.06 inches |
| Model | SCMR-1000 |
Frequently asked questions
Is the Scythe Magoroku compatible with my motherboard socket?
Yes, it supports several modern platforms. The specifications list compatibility with AM4, AM5, LGA 1700, and LGA 1151 sockets. This covers most current AMD and Intel desktop processors. You should verify your specific motherboard model to ensure the mounting holes align with the included hardware.
How tall is the Scythe Magoroku dual tower cooler?
The cooler stands at 6.06 inches in height. This dimension is critical for fitting inside your PC case. You must measure the available space above your RAM slots before installation. Exceeding your case height limit will prevent the side panel from closing properly.
Does the Magoroku cooler fit in standard mid-tower cases?
It is designed for standard mid-tower configurations. The width is 3.93 inches and the length is also 3.93 inches. These dimensions allow it to sit comfortably in most common case layouts. Always check your case manual for maximum CPU cooler height clearance to be safe.
What kind of fans come with the Magoroku?
It includes 120mm fans as part of its standard package. These fans help push air through the dual-tower fin stack. The 120mm size is widely available, making replacements easy to find. They contribute to the overall thermal performance of the unit.
How many heat pipes does the Magoroku use?
The unit utilizes six heat pipes for heat transfer. These pipes move thermal energy from the base to the aluminum fins efficiently. This configuration helps maintain lower temperatures under load. The dual-tower design maximizes the surface area these pipes can dissipate heat into.
Who is the best target audience for this cooler?
It is best for users building on LGA1851 or AM5 platforms. It suits those who prioritize reliable cooling performance over flashy aesthetics. The design focuses on thermal efficiency and RAM clearance. If you need a practical solution for modern processors, this model fits your needs.