6 Best Alternatives to the Gugxiom Replacement CPU Cooling Fan (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for gugxiom replacement CPU cooling fan alternatives because your current part may not fit your specific system needs. The Gugxiom NUC8 Replacement CPU Cooling Fan is a direct replacement for Intel NUC8 systems. It features a 4-pin connector and measures 3.94 by 3.94 by 0.39 inches. This small size and light weight make it suitable for compact desktops. However, you might need a different specification. Your case might require a larger fan, or you could be maintaining legacy hardware that uses older socket standards like Socket 7 or LGA 775.
We selected these alternatives because their specs overlap with the original in terms of function. Some options offer different dimensions for better airflow in specific cases. Others provide copper heat dissipation for older processors. You can find parts designed for legacy systems or specific console replacements. Each option here addresses a distinct cooling requirement. You can choose based on the exact size, material, or socket compatibility your hardware demands. This list helps you find the right fit without guessing.
How alternatives compare to Gugxiom
Noctua SFF Foam CPU Cooler Fan Duct Kit
The Noctua NA-FD1 is a fan duct kit, not a direct cooling unit replacement. It measures 3.9 by 1.89 by 4.72 inches and weighs 1.9 ounces. This accessory optimizes airflow for specific Noctua SFF coolers in perforated cases. It delivers measurable temperature drops through directed air. You should pick this if you have compatible Noctua hardware and want to improve thermal efficiency. It does not replace the fan itself. It complements existing cooling solutions. The Gugxiom fan is a standalone unit for Intel NUC8 systems. The Noctua part is an enhancement for a different ecosystem. Choose Noctua for airflow optimization in supported setups, not for a direct fan swap.
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
The StarTech.com Socket 7/370 CPU Cooler targets legacy hardware, not modern NUC systems. It features a 65x60x45mm form factor and weighs 4.8 ounces. This unit is designed for older Socket 7 or 370 motherboards. It provides a functional replacement for vintage processors. You should choose this if you are maintaining retro computing equipment. It does not fit Intel NUC8 chassis or sockets. The Gugxiom fan is built for compact desktops with specific mounting requirements. This StarTech model is a general-purpose legacy cooler. It lacks the specialized design for small form factor PCs. Pick this option only if your system requires Socket 7 or 370 compatibility.
Ultra Socket 775 Copper Core CPU Cooler
The Ultra P4 LGA 775 Copper Core Heatsink is built for desktop motherboards, not mini PCs. It measures 3.7 by 7.1 by 9.7 inches and weighs 1 pound. This cooler uses copper material for robust heat dissipation. It supports legacy LGA 775 sockets. You should select this for upgrading older desktop systems with high thermal demands. It is too large for NUC8 enclosures. The Gugxiom fan is compact, measuring 3.94 by 3.94 inches. It fits tight spaces where the Ultra cooler cannot. The Ultra unit offers strong airflow for larger processors. It does not support current CPU standards. Choose this only if you have an LGA 775 desktop motherboard.
Socket 478 Aluminum 70mm CPU Cooler
The Socket 478 Aluminum Heatsink with 70mm Fan is a niche part for older Intel Pentium or Celeron systems. It is designed for legacy Socket 478 processors. This unit provides basic cooling for vintage hardware. You should pick this if you are restoring old computers. It does not fit Intel NUC8 systems or sockets. The Gugxiom fan is specific to NUC8 models like the NUC8i7BEH. This StarTech alternative is for a completely different era of computing. It lacks the compact dimensions needed for small form factor PCs. The Gugxiom unit is a direct replacement for specific mini PCs. Choose this option only for Socket 478 maintenance tasks.
StarTech.com 50mm Socket 7/370 Aluminum Cooler
The StarTech.com 50mm Black Socket 7/370 Fan is a replacement for older hardware with TX3 or LP4 connectors. It measures 1.61 by 1.97 inches and weighs 8 ounces. This aluminum cooler is designed for legacy Socket 7 or 370 systems. You should choose this if your vintage motherboard requires these specific connectors. It does not fit Intel NUC8 chassis. The Gugxiom fan is a 4-pin unit for modern compact desktops. This StarTech model is much smaller and built for different sockets. It lacks the mounting compatibility for NUC8 systems. Pick this only if you need a fan for retro Socket 7 or 370 motherboards.
Evercool Wii Cooling Fan
The Evercool Fii Turbo TG-W1 Cooling Fan is a targeted replacement for Nintendo Wii consoles. It is not designed for PC CPU cooling. This part helps restore original console cooling performance. You should pick this if you own a Wii and need a direct replacement. It does not fit Intel NUC8 systems or any desktop motherboard. The Gugxiom fan is built for compact desktop computers. This Evercool unit is for a gaming console. It has different mounting and electrical requirements. The Gugxiom model is a general-purpose PC fan. Choose this only for Wii repair tasks, not for computer upgrades.
Quick picks
Our 7 picks
Gugxiom NUC8 Replacement CPU Cooling Fan
Best for: Intel NUC8 series replacement
- Features
- Fan
- Dimensions
- 3.94 × 3.94 × 0.39 inches
View on Amazon: Gugxiom NUC8 Replacement CPU Cooling Fan Affiliate link
This is a replacement fan for Intel NUC8i7BEH, NUC8i3BEH, NUC8i5BEH, and NUC8i5BEK systems. It measures 3.94 by 3.94 by 0.39 inches and uses a 4-pin power connector. The unit combines aluminum alloy and ABS material for durability. It is designed for easy installation and removal. You should choose this if your original fan failed. It fits compact NUC builds.
Pros
- Fits Intel NUC8 series models
- 4-pin power connector
- Aluminum alloy and ABS construction
- Compact 3.94-inch square size
Cons
- Limited to specific Intel NUC8 models
- Small 0.39-inch height restricts airflow
- No RPM or noise specifications listed
Good fit if
- You own an Intel NUC8 system
- You need a direct replacement part
- You have a compact desktop case
Skip if
- You use a different Intel NUC generation
- You need high airflow cooling
- You want adjustable fan speeds
Verdict: Gugxiom NUC8 Replacement CPU Cooling Fan is a direct replacement for Intel NUC8 systems. It suits users who need a specific part for their compact desktop.
Noctua SFF Foam CPU Cooler Fan Duct Kit
Best for: Optimizing airflow for specific Noctua SFF coolers
- Features
- Fan
- Dimensions
- 4.72 × 3.9 × 1.89 inches
- Weight
- 1.9 ounces
View on Amazon: Noctua SFF Foam CPU Cooler Fan Duct Kit Affiliate link
The Noctua NA-FD1 is a fan duct kit designed for small form factor cases. It bridges the gap between the fan and case panels to improve airflow. The modular EVA foam spacers adjust from 5 to 45mm. It fits specific Noctua coolers like the NH-L9i and NH-L9a. This kit helps lower temperatures by up to 5°C. It suits users with Dan A4-SFX or Loque Ghost S1 cases.
Pros
- Modular EVA foam spacers adjust in 1mm increments
- Improves cooling performance by up to 5°C
- Compatible with NH-L9i and NH-L9a series coolers
- Trusted Noctua quality with a 6-year warranty
Cons
- Limited to specific Noctua cooler models
- Requires a perforated case panel to function
- Only includes the duct kit, not a fan
Good fit if
- You use a small form factor case with perforated panels
- You own a compatible Noctua NH-L9 or NH-L9a cooler
- You want to maximize airflow in a compact build
Skip if
- You do not have a Noctua NH-L9 or NH-L9a cooler
- Your case panel is solid without perforations
- You need a complete cooler with a fan included
Verdict: The Noctua NA-FD1 CPU Cooler Fan Duct Kit is a precise accessory for users with compatible Noctua coolers and perforated SFF cases. It delivers measurable temperature drops through optimized airflow.
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
Best for: Legacy Socket 7 and 370 systems
- Socket Compatibility
- Socket 7/370
- Features
- Fan
- Weight
- 4.8 ounces
View on Amazon: StarTech.com 65x60x45mm Socket 7/370 CPU Cooler Affiliate link
This StarTech.com unit is a dedicated cooling solution for legacy systems. It measures 65x60x45mm and supports Socket 7 and Socket 370 processors. The package includes a heatsink and a fan with a TX3 connector. Weighing 4.8 ounces, it is a compact replacement for older motherboards. You should choose this if you need to restore or maintain a vintage PC build.
Pros
- Compatible with Socket 7 and Socket 370
- Includes heatsink and fan assembly
- Uses standard TX3 connector
- Compact 65x60x45mm size
Cons
- Limited to older Socket 7 and 370 platforms
- No PWM speed control mentioned
- Single fan configuration only
Good fit if
- You are repairing a vintage Socket 370 system
- You need a direct replacement for a failed TX3 fan
- You are building a retro computing project
Skip if
- You have a modern LGA or AM4 socket
- You require active fan speed control
- You need a cooler for high-end gaming CPUs
Verdict: StarTech.com Socket 7/370 CPU Cooler Fan is a functional replacement for legacy hardware. It fits users maintaining older Socket 7 or 370 motherboards who need a simple fan and heatsink unit.
Ultra Socket 775 Copper Core CPU Cooler
Best for: legacy LGA 775 CPU cooling
- Socket Compatibility
- Socket 775
- Fan Speed
- 3600 RPM
- Material
- Copper
- Features
- Fan
- Dimensions
- 9.7 × 3.7 × 7.1 inches
- Weight
- 1 pounds
View on Amazon: Ultra Socket 775 Copper Core CPU Cooler Affiliate link
This Ultra P4 heatsink uses a copper core with aluminum fins for efficient heat transfer on LGA 775 sockets. The included fan runs at 3600 RPM and supports PWM speed control. It measures 9.7 inches in length and weighs one pound. You should choose this unit if you need a reliable cooling solution for older Intel platforms that require a copper-based thermal design.
Pros
- Copper core heatsink construction for better conductivity
- High fan speed of 3600 RPM
- Supports PWM fan speed control
- Compatible with LGA 775 sockets
Cons
- Uses a sleeve bearing instead of a more durable fluid dynamic bearing
- Only compatible with the older LGA 775 socket type
- Large dimensions may not fit in small form factor cases
Good fit if
- You are building or maintaining a system with an LGA 775 processor
- You prefer copper core heatsinks for their thermal performance
- You need a high-RPM fan for maximum airflow
Skip if
- You have a modern motherboard with LGA 1700 or AM5 sockets
- You are installing the cooler in a case with strict height restrictions
- You require a fan bearing rated for higher longevity than sleeve bearings
Verdict: Ultra P4 LGA 775 Copper Core Heatsink is a solid choice for users upgrading legacy LGA 775 systems who need robust copper-based cooling. It delivers strong airflow for older processors but does not support current CPU socket standards.
Socket 478 Aluminum 70mm CPU Cooler
Best for: legacy Socket 478 Intel Pentium systems
- Socket Compatibility
- Socket 478
- Fan Size
- 70 mm
- Features
- Fan
View on Amazon: Socket 478 Aluminum 70mm CPU Cooler Affiliate link
This Socket 478 cooling solution pairs an aluminum heat sink with a 70 mm sleeve bearing fan. It supports Intel Pentium processors up to 3.2 GHz and Celeron Dup up to 2.8 GHz. The fan operates at 3500 RPM on 12V power with a 3-pin connector. It is designed for older desktop systems requiring legacy CPU cooling.
Pros
- Aluminum heat sink for efficient passive cooling
- 70 mm fan runs at 3500 RPM
- Compatible with Socket 478 Intel Pentium and Celeron CPUs
- 10,000 hour rated fan lifetime
Cons
- Small 70 mm fan size limits airflow compared to standard 80 mm or 120 mm units
- Sleeve bearing fan may have shorter longevity than fluid dynamic bearing alternatives
- Limited to older Socket 478 architecture, not suitable for modern CPUs
Good fit if
- You are repairing or upgrading an older Socket 478 desktop PC
- You need a direct replacement for a failed CPU cooler on legacy hardware
- You require a low-power cooling solution for basic office tasks on older systems
Skip if
- You have a modern CPU requiring Socket 115x, AM4, or AM5 compatibility
- You need high airflow for gaming or intensive workloads
- You prefer larger fans for quieter operation
Verdict: Socket 478 Aluminum Heatsink & 70mm Fan is a niche replacement part for specific legacy hardware. It fits users maintaining older Intel Pentium or Celeron systems who need a functional, spec-matched cooler.
StarTech.com 50mm Socket 7/370 Aluminum Cooler
Best for: legacy Socket 7 and 370 systems
- Socket Compatibility
- Socket 370, Socket 7
- Fan Size
- 50 mm
- Color
- Black
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 1.97 × 1.61 × 1.97 inches
View on Amazon: StarTech.com 50mm Socket 7/370 Aluminum Cooler Affiliate link
This StarTech.com fan is a black, 50mm unit designed for legacy Socket 7 and Socket 370 processors. It includes a heatsink and comes with both TX3 and LP4 connectors for flexible mounting. The aluminum construction keeps the weight at 8 ounces. It fits small form factor builds or older systems requiring a 50mmx50mmx41mm footprint.
Pros
- Black aluminum heatsink and fan assembly
- Compatible with Socket 7 and Socket 370
- Includes TX3 and LP4 connectors
- Compact 50mmx50mmx41mm dimensions
Cons
- Small 50mm fan size limits airflow
- Only supports older Socket 7 and 370
- No mention of PWM speed control
Good fit if
- You need a replacement for a Socket 370 system
- You require TX3 or LP4 connectors
- You are building a compact legacy PC
Skip if
- You use modern Socket AM4 or LGA1700
- You need a 120mm or larger fan
- You require PWM fan control
Verdict: StarTech.com 50mm Black Socket 7/370 Fan is a straightforward replacement for older hardware. It fits users maintaining legacy Socket 7 or 370 systems who need specific TX3 or LP4 connectors.
Evercool Wii Cooling Fan
Best for: Wii console cooling replacement
- Features
- Fan
View on Amazon: Evercool Wii Cooling Fan Affiliate link
This Evercool Fii Turbo TG-W1 is a replacement fan designed for the Nintendo Wii console. It features a specific model designation of TG-W1. The unit functions as a dedicated fan component for internal cooling. It is suitable for users needing a direct replacement for their Wii hardware. The design focuses on restoring airflow to the original system. You should consider this if your console requires a new fan unit.
Pros
- Specifically designed for Nintendo Wii consoles
- Model TG-W1 matches original specifications
- Functions as a dedicated cooling fan
Cons
- Limited to single device compatibility
- No included mounting hardware listed
- Basic fan-only design without heatsink
Good fit if
- You need a direct replacement fan for a Wii
- You want a model-specific part for repair
- You are restoring original console airflow
Skip if
- You need a CPU cooler for a PC
- You require a fan with a heatsink
- You want a universal replacement part
Verdict: Evercool Fii Turbo TG-W1 Cooling Fan is a targeted replacement part for Wii owners. It fits users who need to restore original console cooling rather than upgrading PC hardware.
Specifications side by side
| Spec | Gugxiom NUC8 Replacement CPU Cooling Fan | Noctua SFF Foam CPU Cooler Fan Duct Kit | StarTech.com 65x60x45mm Socket 7/370 CPU Cooler | Ultra Socket 775 Copper Core CPU Cooler | Socket 478 Aluminum 70mm CPU Cooler | StarTech.com 50mm Socket 7/370 Aluminum Cooler | Evercool Wii Cooling Fan |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | not stated | not stated | Socket 7/370 | Socket 775 | Socket 478 | Socket 370, Socket 7 | not stated |
| Fan Size | not stated | not stated | not stated | not stated | 70 mm | 50 mm | not stated |
| Fan Speed | not stated | not stated | not stated | 3600 RPM | not stated | not stated | not stated |
| Color | not stated | Black | Black | not stated | not stated | Black | not stated |
| Material | not stated | not stated | not stated | Copper | not stated | Aluminum | not stated |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 3.94 × 3.94 × 0.39 inches | 4.72 × 3.9 × 1.89 inches | not stated | 9.7 × 3.7 × 7.1 inches | not stated | 1.97 × 1.61 × 1.97 inches | not stated |
| Weight | not stated | 1.9 ounces | 4.8 ounces | 1 pounds | not stated | 8 ounces | not stated |
| Model | Gugxiomu8zgh7vyrc14382 | NA-FD1 | FAN370PRO | ult31797 | not stated | FANP1003LD | not stated |
| Size | not stated | One Size | 65x60x45mm | not stated | not stated | not stated | not stated |
You can review comviee replacement fan alternatives if you need specifications for smoker hardware instead.
Frequently asked questions
Is there a direct replacement for the Gugxiom NUC8 fan?
Yes, the Gugxiom NUC8 Replacement CPU Cooling Fan serves as a direct swap for Intel NUC8 systems. It measures 3.94 by 3.94 by 0.39 inches. This specific form factor ensures it fits compact desktops designed for that generation. You should verify your system model before purchasing to ensure compatibility.
Can I use the Noctua NA-FD1 to replace a broken fan?
No, the Noctua NA-FD1 is a fan duct kit, not a cooling fan itself. It measures 3.9 by 1.89 by 4.72 inches and weighs 1.9 ounces. This accessory optimizes airflow for specific Noctua SFF coolers in perforated cases. It delivers measurable temperature drops but does not generate air movement on its own.
What cooler works for legacy Socket 7 systems?
The StarTech.com Socket 7/370 CPU Cooler Fan is a functional replacement for legacy hardware. It measures 65x60x45mm and weighs 4.8 ounces. It fits users maintaining older Socket 7 or 370 motherboards who need a simple fan and heatsink unit. This option provides basic cooling for older processor architectures.
Is the Ultra P4 LGA 775 cooler compatible with modern CPUs?
No, the Ultra P4 LGA 775 Copper Core Heatsink does not support current CPU socket standards. It is designed for legacy LGA 775 CPU cooling. The unit measures 3.7 by 7.1 by 9.7 inches and weighs 1 pounds. It delivers strong airflow for older processors but lacks modern socket compatibility.
What is the best budget option for old motherboards?
The StarTech.com Socket 7/370 CPU Cooler Fan is listed as the best budget choice. It is a functional replacement for legacy hardware. It fits users maintaining older Socket 7 or 370 motherboards who need a simple fan and heatsink unit. This option provides basic cooling for older processor architectures without premium features.
Does the StarTech.com 50mm cooler use a standard connector?
The StarTech.com 50mm Black Socket 7/370 Fan is designed for specific legacy connectors. It fits users maintaining legacy Socket 7 or 370 systems who need specific TX3 or LP4 connectors. The unit measures 1.61 by 1.97 by 1.97 inches and weighs 8 ounces. It provides straightforward replacement for older hardware.
Can I use these fans for console cooling?
The Evercool Fii Turbo TG-W1 Cooling Fan is a targeted replacement part for Wii owners. It fits users who need to restore original console cooling rather than upgrading PC hardware. This specific part is designed for the Nintendo Wii. It does not serve as a general-purpose PC CPU cooler.
What material is used in the Ultra LGA 775 cooler?
The Ultra P4 LGA 775 Copper Core Heatsink uses copper as its primary material. It is a solid choice for users upgrading legacy LGA 775 systems who need robust copper-based cooling. The unit measures 3.7 by 7.1 by 9.7 inches and weighs 1 pounds. Copper helps dissipate heat effectively for older processors.