TRADOCK Replacement CPU Cooling Fan Alternatives: 6 Similar Picks Compared

How alternatives differ from TRADOCK

Noctua SFF Foam CPU Cooler Fan Duct Kit

The Noctua NA-FD1 is not a direct fan replacement like the TRADOCK unit. It is a duct kit designed to improve airflow from your existing fan. While the TRADOCK fan restores the original 5V 0.22A electrical specs for Beelink Mini PCs, this Noctua kit focuses on physical airflow management in small cases. It measures 3.9 by 1.89 by 4.72 inches. You should choose this if you have a compatible cooler but need better air direction. It does not replace a broken fan. It works with standard fans. This is an add-on for case optimization rather than a component swap for mini PCs.

StarTech.com 65x60x45mm Socket 7/370 CPU Cooler

The StarTech FAN370PRO targets Socket 7 and Socket 370 systems, which is very different from the Beelink Mini PC focus of the TRADOCK fan. This cooler measures 65 by 60 by 45mm and weighs 4.8 ounces. It serves users restoring vintage hardware who need a TX3 connector replacement. The TRADOCK unit uses a 4-pin connector for DC 5V 0.22A input. This StarTech option is a precise fit for older Intel platforms. It does not fit modern mini PCs. Pick this if you are working on retro builds. It offers a dedicated cooling solution for legacy sockets rather than a generic fan replacement for consumer electronics.

Ultra Socket 775 Copper Core CPU Cooler

The Ultra P4 LGA 775 Heatsink is built for legacy LGA 775 platforms. It features a copper core and weighs 1 pound. Its dimensions are 3.7 by 7.1 by 9.7 inches. This is a substantial heatsink assembly, unlike the small TRADOCK 5008 fan which weighs only a fraction of an ounce. The TRADOCK fan is a direct electrical replacement for Beelink devices. The Ultra cooler is for desktop towers. It does not support newer CPU sockets. Choose this if you own an older LGA 775 system. It provides robust copper core cooling. It is not suitable for mini PCs or vintage console replacements. It serves a completely different market segment.

Socket 478 Aluminum 70mm CPU Cooler

The Socket 478 Aluminum 70mm CPU Cooler is designed for older Intel systems. It fits users restoring vintage Pentium or Celeron PCs. This is a basic cooling solution for low-power processors. The TRADOCK fan is a specific replacement for Beelink Mini PCs with precise 5V 0.22A specs. This Socket 478 unit targets a different era of computing. It does not match the electrical requirements of modern mini PCs. It is a direct fit for legacy Intel motherboards. Pick this if you are repairing an old desktop. It is not compatible with Beelink devices. It offers a simple aluminum cooling option for retro builds rather than a specialized fan swap.

StarTech.com 50mm Socket 7/370 Aluminum Cooler

The StarTech FANP1003LD is a niche part for Socket 7 and Socket 370 builds. It measures 1.61 by 1.97 by 1.97 inches and weighs 8 ounces. This is an aluminum cooler for vintage PC restoration. The TRADOCK fan is a 5008 model replacement for Beelink Mini PCs. It uses a 4-pin connector and 5V input. This StarTech unit is black and fits older systems. It does not fit modern mini PCs. Choose this if you are restoring vintage hardware. It is not a drop-in replacement for consumer electronics. It serves a specific retro computing niche. The physical size and socket compatibility are completely different from the TRADOCK fan.

Evercool Wii Cooling Fan

The Evercool Fii Turbo TG-W1 Fan is a specialized replacement for Nintendo Wii consoles. It suits users who need a direct swap for a failing unit or want slightly better airflow. The TRADOCK fan is designed for Beelink Mini PCs like the U59 PRO. It matches specific 5V 0.22A electrical specs. This Evercool fan targets a gaming console. It is not compatible with Beelink devices. Pick this if you are repairing a Wii. It offers a direct replacement for a specific console model. It does not fit mini PCs. The application is entirely different. It serves the gaming hardware market rather than the mini PC restoration market.

Quick picks

Our 7 picks

1 Best overall

TRADOCK 5008 Replacement Fan for Beelink Mini PCs

Best for: Beelink Mini PC fan replacements

Features

Fan

View on Amazon: TRADOCK 5008 Replacement Fan for Beelink Mini PCs Affiliate link

This TRADOCK replacement fan is designed for specific Beelink Mini PCs, including the U59 PRO, GK55, Ace, Magician, and T8Pro. It operates on DC 5V at 0.22A and uses a 4-pin connector. The unit is a 5008 size fan, making it a direct swap for the original 14.11.0170Q0A4 part. You get a single fan in the package. It suits users who need a straightforward, compatible replacement for their specific mini PC model.

Pros

• Compatible with Beelink U59 PRO, GK55, Ace, Magician, and T8Pro
• Uses standard 4-pin power connector
• Operates at DC 5V 0.22A
• Direct replacement for P/N 14.11.0170Q0A4

Cons

• Limited to specific Beelink Mini PC models
• Small 5008 fan size restricts airflow potential
• Single fan only, no heatsink included

Good fit if

• You need a direct replacement for a Beelink Mini PC fan
• Your original fan failed and you need a compatible 5V 4-pin unit
• You are repairing a Beelink U59 PRO, GK55, Ace, Magician, or T8Pro

Skip if

• You need a fan for a desktop PC or different brand
• You require a larger fan for better cooling performance
• You need a complete heatsink and fan assembly

Verdict: TRADOCK 5008 Replacement Fan for Beelink Mini PCs is a precise replacement part for users with compatible Beelink Mini PCs who need to restore cooling function with the original electrical specifications.

2 Also great

Noctua SFF Foam CPU Cooler Fan Duct Kit

Best for: Small form factor cases with perforated panels

Features

Fan

Dimensions

4.72 × 3.9 × 1.89 inches

Weight

1.9 ounces

View on Amazon: Noctua SFF Foam CPU Cooler Fan Duct Kit Affiliate link

This duct kit bridges the gap between your fan and case panels to improve airflow. It uses EVA foam spacers adjustable from 5 to 45mm. The kit measures 3.9 x 1.89 x 4.72 inches and weighs 1.9 ounces. It fits Noctua NH-L9i and NH-L9a series coolers. You should use this if you have a small form factor case with perforated panels.

Pros

• Improves cooling performance by up to 5°C
• Adjustable spacers range from 5 to 45mm
• Compatible with NH-L9i and NH-L9a coolers
• Includes 6-year manufacturer warranty

Cons

• Only works with specific Noctua cooler models
• Requires a case with perforated panels
• Does not include the fan itself

Good fit if

• You use an NH-L9i or NH-L9a cooler
• You have a small form factor case
• Your case has perforated side panels

Skip if

• You use a cooler not listed in the specs
• Your case does not have perforated panels
• You need a fan included in the package

Verdict: Noctua NA-FD1 Fan Duct Kit helps you get better cooling from your existing fan. It is a practical add-on for small cases with the right cooler.

3 Best budget

StarTech.com 65x60x45mm Socket 7/370 CPU Cooler

Best for: Socket 7 and Socket 370 retro builds

Socket Compatibility

Socket 7/370

Features

Fan

Weight

4.8 ounces

View on Amazon: StarTech.com 65x60x45mm Socket 7/370 CPU Cooler Affiliate link

This StarTech.com unit is a dedicated cooling device for legacy Socket 7 and Socket 370 processors. It measures 65x60x45mm and includes a heatsink with a fan. The package weighs 4.8 ounces. It uses a TX3 connector for compatibility. You should choose this if you are restoring older hardware or need a specific replacement for a vintage motherboard. It is not suitable for modern CPU sockets.

Pros

• Compatible with Socket 7 and Socket 370
• Includes integrated heatsink and fan
• Uses TX3 connector for direct fit
• Compact 65x60x45mm dimensions

Cons

• Only supports legacy Socket 7/370 CPUs
• Does not fit modern LGA or AM sockets
• Limited to older computer systems

Good fit if

• You need a replacement for a Socket 370 motherboard
• You are building or repairing a vintage PC
• You require a TX3 connector type

Skip if

• You have a modern LGA or AM socket
• You need support for Socket 478 or newer
• You are upgrading a current generation desktop

Verdict: StarTech 65x60x45mm Socket 7/370 Cooler is a precise fit for Socket 7 and Socket 370 systems. It serves users restoring vintage hardware who need a direct TX3 connector replacement.

4 Also great

Ultra Socket 775 Copper Core CPU Cooler

Best for: legacy LGA 775 CPU cooling

Socket Compatibility

Socket 775

Fan Speed

3600 RPM

Material

Copper

Features

Fan

Dimensions

9.7 × 3.7 × 7.1 inches

Weight

1 pounds

View on Amazon: Ultra Socket 775 Copper Core CPU Cooler Affiliate link

This Ultra P4 cooler uses a copper core with aluminum fins for efficient heat transfer on Socket 775 processors. The included fan runs at 3600 RPM and supports PWM speed control. It measures 9.7 inches in length and weighs 1 pound. You should choose this unit if you need a reliable air cooler for older LGA 775 systems that require a copper-based solution.

Pros

• Copper core heatsink construction
• 3600 RPM fan speed
• PWM fan speed control
• Aluminum fins for heat dissipation

Cons

• Sleeve bearing may have shorter lifespan than fluid dynamic bearings
• Limited to Socket 775 compatibility
• 9.7-inch height may not fit smaller cases

Good fit if

• You are upgrading an older LGA 775 system
• You prefer copper core heat sinks for better thermal conductivity
• You need PWM fan control for adjustable noise levels

Skip if

• You use a modern socket like LGA 1700 or AM5
• You require a low-profile cooler under 4 inches
• You prefer a fan with a longer-lasting bearing type

Verdict: Ultra P4 LGA 775 Heatsink is a solid choice for owners of legacy LGA 775 platforms who want copper core cooling. It fits well in standard towers but does not support newer CPU sockets.

5 Best premium

Socket 478 Aluminum 70mm CPU Cooler

Best for: Restoring legacy Socket 478 Intel systems

Socket Compatibility

Socket 478

Fan Size

70 mm

Features

Fan

View on Amazon: Socket 478 Aluminum 70mm CPU Cooler Affiliate link

This replacement kit pairs an aluminum heat sink with a 70 mm fan for older Socket 478 systems. The fan runs at 3500 RPM on 12V power, supporting Intel Pentium processors up to 3.2 GHz. It uses a standard 3-pin connector and features a sleeve bearing rated for 10,000 hours. You need this if you are restoring legacy hardware or replacing a failed cooling unit for a specific vintage motherboard.

Pros

• Aluminum heat sink construction
• 70 mm fan size with 15 mm thickness
• 3500 RPM fan speed at 12V
• Standard 3-pin motherboard connector
• 10,000-hour sleeve bearing lifetime

Cons

• Small 70 mm fan limits cooling capacity
• Sleeve bearing is less durable than fluid dynamic bearings
• Only supports legacy Socket 478 processors

Good fit if

• You are replacing a broken cooler on a Socket 478 motherboard
• You need a direct replacement for an Intel Pentium or Celeron system
• You are building a retro computing rig

Skip if

• You use a modern Socket LGA or AM4/AM5 motherboard
• You require high airflow for overclocked CPUs
• You need a larger 80 mm or 92 mm fan for better cooling

Verdict: Socket 478 Heatsink & Fan 70mm is a specific replacement for older Intel systems. It fits users restoring vintage Pentium or Celeron PCs who need a basic cooling solution for low-power processors.

6 Best black

StarTech.com 50mm Socket 7/370 Aluminum Cooler

Best for: Socket 370 vintage PC restoration

Socket Compatibility

Socket 370, Socket 7

Fan Size

50 mm

Color

Black

Material

Aluminum

Features

Fan

Dimensions

1.97 × 1.61 × 1.97 inches

View on Amazon: StarTech.com 50mm Socket 7/370 Aluminum Cooler Affiliate link

This StarTech.com unit is a black aluminum CPU cooler fan designed for legacy systems. It supports Socket 7 and Socket 370 processors. The fan measures 50 mm by 50 mm by 41 mm. It weighs 8 ounces and includes an LP4 connector. You need this if you are maintaining older hardware. It fits tight spaces due to its small footprint. It is not for modern sockets.

Pros

• Supports Socket 7 and Socket 370
• Compact 50 mm fan size
• Aluminum heatsink construction
• Includes LP4 connector

Cons

• Only fits legacy Socket 7 and 370
• Small 50 mm fan limits airflow
• No mention of PWM speed control

Good fit if

• You are repairing a Socket 370 system
• You need a direct replacement for an old fan
• You have limited space for a 50 mm cooler

Skip if

• You use a modern CPU socket
• You need high airflow for gaming
• You require PWM fan control

Verdict: StarTech 50mm Socket 7 CPU Cooler is a niche part for Socket 7 and 370 builds. It suits you only if you are restoring vintage hardware. It does not fit modern systems.

7 Also great

Evercool Wii Cooling Fan

Best for: Wii console fan replacement

Features

Fan

View on Amazon: Evercool Wii Cooling Fan Affiliate link

This Evercool TG-W1 is a replacement cooling fan designed for the Nintendo Wii console. It features a turbo design to improve airflow over the original unit. The product is listed as a standalone fan component. It is a practical option for users needing to replace a failed or noisy fan in their Wii hardware. The data confirms it is a fan-only part without additional mounting hardware.

Pros

• Turbo cooling design for improved airflow
• Direct replacement for Nintendo Wii Model TG-W1
• Standalone fan unit for easy swapping

Cons

• No mounting hardware included in data
• Specific to Wii console only
• No airflow or noise specs provided

Good fit if

• You need a direct replacement for a Wii TG-W1 fan
• You want to upgrade to a turbo fan for better cooling
• You are repairing a noisy or failed Wii cooling system

Skip if

• You need a fan for a PC CPU cooler
• You require mounting brackets or screws
• You are looking for detailed airflow specifications

Verdict: Evercool Fii Turbo TG-W1 Fan is a specialized replacement part for Nintendo Wii consoles. It suits users who need a direct swap for a failing unit or want slightly better airflow for their gaming device.

Specifications side by side

Frequently asked questions