Thermalright Burst Assassin 120 ARGB Alternatives: 6 Similar Picks Compared

How alternatives differ from Burst Assassin

Thermalright AXP120-X67 White ARGB

The Thermalright AXP120-X67 White ARGB is a low-profile cooler, measuring just 2.64 inches in height. This is significantly shorter than the 6-inch Burst Assassin. It uses six heat pipes in a horizontal orientation, which suits compact cases with strict height limits. You lose the vertical tower design and potentially higher airflow capacity. However, you gain compatibility with small form factor builds where a standard tower would not fit. It supports the same modern sockets, including AM5 and LGA 1851. This option is for users who prioritize case fit over maximum cooling headroom. The white ARGB aesthetic matches the original but in a much smaller footprint.

Thermalright Assassin X 120 White ARGB

The Thermalright Assassin X 120 White ARGB uses four heat pipes instead of the six found in the Burst Assassin. It is a single-tower design, similar to the original, but with a slightly different height and weight profile. The cooler features white ARGB lighting, offering a specific aesthetic choice. You give up some raw thermal performance due to the reduced heat pipe count. However, it remains a solid choice for quiet builds with modern socket support. It fits users who want a white theme without the bulk of a dual-tower cooler. The socket compatibility matches the original, covering AM5 and LGA 1700. This is a budget-friendly alternative for standard mid-tower cases.

Thermalright Peerless Assassin 120 White ARGB Cooler

The Thermalright Peerless Assassin 120 White ARGB features a dual-tower design, unlike the single tower of the Burst Assassin. It also uses six heat pipes but in a larger, more substantial chassis. The height is 6.1 inches, slightly taller than the 6-inch Burst Assassin. This design provides greater cooling capacity for high-end CPUs. You gain thermal performance but risk clearance issues with tall RAM modules or smaller cases. The white ARGB lighting matches the aesthetic of the original. It supports the same modern sockets, including AM5 and LGA 1851. This pick is for users with standard mid-tower cases who need maximum cooling power and have the physical space to accommodate the larger dual-tower structure.

Thermalright Assassin King 120 SE White ARGB

The Thermalright Assassin King 120 SE White ARGB uses five heat pipes, one fewer than the Burst Assassin. It is a single-tower cooler with a height of 2.87 inches, which appears to be a typo in the data as other specs list 5.83 inches length. Assuming standard dimensions, it is a compact single tower. It offers white ARGB lighting and supports modern sockets like AM5 and LGA 1700. You give up one heat pipe compared to the original, which may affect peak thermal performance. However, it provides a quiet operation profile and a white aesthetic. This is a good alternative for users who want a slightly different thermal profile or specific color scheme while maintaining compatibility with current CPU platforms.

Thermalright AXP120-X67 White ARGB Cooler

The Thermalright AXP120-X67 White ARGB Cooler is another low-profile option, identical in dimensions to the first entry. It measures 2.64 inches in height and uses six heat pipes in a horizontal layout. This design is strictly for compact cases with tight clearance constraints. You sacrifice the vertical airflow dynamics of the Burst Assassin tower. However, you gain the ability to use a standard 120mm fan in a low-profile orientation. It supports AM4, LGA 1851, and LGA 1700 sockets. The white ARGB lighting provides a consistent aesthetic. This pick is for builders who cannot accommodate any tower cooler taller than 2.64 inches and still require six heat pipes for thermal management.

Thermalright Assassin King 120 White ARGB

The Thermalright Assassin King 120 White ARGB is a single-tower cooler with five heat pipes. It features white ARGB lighting and supports modern sockets including AM5 and LGA 1700. The dimensions indicate a compact profile suitable for medium cases. You give up one heat pipe compared to the Burst Assassin, which may result in slightly higher temperatures under heavy loads. However, it offers a quiet operation and a white aesthetic that matches many modern builds. This alternative is ideal for users who prioritize RAM clearance and noise levels over maximum thermal headroom. It maintains the same socket compatibility as the original, ensuring it works with both Intel and AMD platforms without modification.

Quick picks

Our 7 picks

1 Best overall

Thermalright Burst Assassin 120 ARGB

Best for: Medium cases needing ARGB and modern socket support

Socket Compatibility

AM4, AM5, LGA1700/1851/1150/1151/1200

Cooler Height

154 mm

Heat Pipes

6

Tower Design

Single-Tower

Fan Size

120 mm

Fan Speed

1550 RPM

View on Amazon: Thermalright Burst Assassin 120 ARGB

This single-tower air cooler uses six 6mm copper heat pipes and a 120mm PWM fan to dissipate heat. It stands 154mm tall, fitting medium-sized cases. The unit supports AM5, AM4, and LGA1700/1851 sockets. You get ARGB lighting and quiet operation at 25.6dB. It is a practical option for standard desktop builds that need reliable cooling without the bulk of a dual-tower design.

Pros

• Six 6mm pure copper heat pipes with AGHP technology
• 120mm PWM fan delivers 66.17 CFM airflow
• Supports AM5, AM4, LGA1700, and LGA1851 sockets
• ARGB lighting included

Cons

• Single-tower design limits cooling headroom compared to dual-tower alternatives
• 154mm height restricts compatibility with smaller computer cases
• Fan speed is capped at 1550 RPM

Good fit if

• You need a cooler that fits in a medium-sized case
• You want ARGB lighting for your build
• You are using an AM5 or LGA1700 socket

Skip if

• You require a low-profile cooler for a small form factor case
• You need maximum cooling performance for high-end CPUs
• You prefer a dual-tower design for better heat dissipation

Verdict: Thermalright Burst Assassin 120 ARGB is a solid single-tower choice for users with medium-sized cases who want ARGB lighting and modern socket support without the bulk of larger coolers.

2 Also great

Thermalright AXP120-X67 White ARGB

Best for: Compact cases with strict height limits

Socket Compatibility

AM4, AM5, LGA1700, LGA1851, LGA1200

Cooler Height

67 mm

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120 mm

Fan Speed

1800 RPM

View on Amazon: Thermalright AXP120-X67 White ARGB

The Thermalright AXP120-X67 is a low-profile air cooler designed for compact PC builds. It stands just 67 mm tall, fitting easily into small form factor cases. The unit includes a 120 mm PWM fan that moves up to 59 CFM of air while staying under 26.1 dB. Six 6 mm heat pipes use AGHP technology to manage heat effectively in vertical or horizontal positions. It supports modern Intel and AMD sockets.

Pros

• Ultra-compact 67 mm height for small cases
• Six 6 mm pure copper heat pipes
• AGHP technology prevents gravity-related heat transfer issues
• Quiet operation at 26.1 dB or less
• Includes 5V 3-pin ARGB lighting

Cons

• Low-profile design limits maximum cooling capacity
• Single fan configuration restricts airflow volume
• Aluminum fins may offer less thermal mass than all-copper designs

Good fit if

• You need a cooler under 70 mm tall
• You build in a small form factor case
• You want ARGB lighting on a white build

Skip if

• You run a high-TDP CPU over 150W
• You require maximum cooling performance
• You prefer a dual-fan setup for redundancy

Verdict: The Thermalright AXP120-X67 White Low-Profile Cooler fits users who prioritize case compatibility over raw cooling power. It is the right pick for compact builds where height is the main constraint.

3 Best budget

Thermalright Assassin X 120 White ARGB

Best for: Quiet white ARGB builds

Socket Compatibility

AM4, AM5, LGA 115X, 1200, 1700, 1851

Cooler Height

148 mm

Heat Pipes

4

Fan Size

120 mm

TDP Rating

125-225 W

Fan Speed

1550 RPM

View on Amazon: Thermalright Assassin X 120 White ARGB

This Thermalright cooler uses four 6mm heat pipes and a 120mm PWM fan to handle 125–225 W TDP loads. It features ARGB lighting and operates at 1550 RPM with noise levels under 25.6 dB. The 148 mm height fits most medium cases. It supports modern Intel and AMD sockets. This model offers efficient cooling for budget builds.

Pros

• Four 6mm AGHP heat pipes
• 120mm PWM fan at 1550 RPM
• ARGB lighting effects
• Quiet operation under 25.6 dB

Cons

• Only four heat pipes compared to six in competitors
• 148 mm height may limit fit in small cases
• Lower fan speed than high-performance alternatives

Good fit if

• You need a white ARGB cooler
• You have a medium-sized case
• You want quiet operation under 26 dB

Skip if

• You require six heat pipes
• Your case height is under 148 mm
• You need support for older AM3 sockets

Verdict: Thermalright AssassinX120 SE ARGB White provides solid cooling with four heat pipes and quiet ARGB lighting. It fits users who prioritize aesthetics and low noise over maximum thermal headroom.

4 Best premium

Thermalright Peerless Assassin 120 White ARGB Cooler

Best for: standard mid-tower cases with tall RAM

Socket Compatibility

AM4 AM5/Intel 1700/1150/1151/1851

Cooler Height

155mm

Heat Pipes

6

Tower Design

Double tower

Fan Size

120mm

Fan Speed

1550rpm±10%

View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler

This dual-tower air cooler uses six 6mm heat pipes and two 120mm PWM fans. It reaches 1550 RPM with an airflow of 66.17 CFM. The unit stands 155 mm tall and supports AM5 and LGA 1700 sockets. You get ARGB lighting and a white finish. It fits well if you need strong cooling performance in a standard mid-tower case.

Pros

• Dual-tower design with six heat pipes
• Includes two 120mm PWM fans
• ARGB lighting support
• White color option available

Cons

• 155 mm height may block tall RAM sticks
• 1.87 pound weight is heavy for small cases
• No software control for ARGB listed

Good fit if

• You need strong cooling for high-end CPUs
• You have a mid-tower case with room for height
• You want a white build with ARGB lighting

Skip if

• You are building a small form factor PC
• You have very tall RAM that blocks the cooler
• You prefer a single-tower design for space saving

Verdict: Thermalright PA120 SE ARGB White Dual Tower delivers solid cooling through its dual-tower and six heat pipe design. It is a strong match for users with standard cases who need reliable performance for modern sockets.

5 Also great

Thermalright Assassin King 120 SE White ARGB

Best for: quiet white builds with AM5 sockets

Socket Compatibility

AM4, AM5, LGA 1700, 1851, 1200, 115X

Cooler Height

148mm

Heat Pipes

5

Fan Size

120mm

Fan Speed

1550 RPM

Lighting

ARGB

View on Amazon: Thermalright Assassin King 120 SE White ARGB

The Thermalright AK120 SE is a white air cooler with five heat pipes and ARGB lighting. It measures 148mm in height and supports AM4, AM5, and LGA sockets. The included 120mm PWM fan runs up to 1550 RPM with a maximum airflow of 66.17 CFM. Noise levels stay at or below 25.6 dB. This cooler suits users who need a compact white build with modern lighting effects.

Pros

• Five 6mm heat pipes with AGHP III technology
• White ARGB lighting for aesthetic builds
• Low noise output of 25.6 dB(A) max
• Broad socket support including AM5 and LGA 1851

Cons

• Only five heat pipes compared to six in competitors
• Single fan limits total airflow capacity
• 148mm height may restrict fit in smaller cases

Good fit if

• You need a white-themed build with ARGB lighting
• You use AM5 or LGA 1851 sockets
• You prefer quiet operation under 26 dB

Skip if

• You require six heat pipes for higher thermal headroom
• You need dual fans for maximum cooling performance
• Your case has strict height limits under 148mm

Verdict: The Thermalright AK120 SE 120mm White ARGB fits users who prioritize a white aesthetic and quiet operation over maximum cooling power. It is a solid choice for mid-range CPUs in compact white builds.

6 Also great

Thermalright AXP120-X67 White ARGB Cooler

Best for: Small cases with LGA 1700/1851

Cooler Height

67mm

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120mm

Fan Speed

1800 RPM

Lighting

ARGB

View on Amazon: Thermalright AXP120-X67 White ARGB Cooler

This Thermalright AXP120-X67 is a low-profile air cooler designed for small form factor cases. It stands 67mm tall and uses six 6mm copper heat pipes with AGHP technology to manage heat effectively. The included 120mm PWM fan runs up to 1800 RPM with ARGB lighting. It supports modern Intel sockets like LGA 1700 and 1851, as well as AMD AM4. You get a white finish with pure copper base construction.

Pros

• 67mm low-profile height fits compact cases
• Six 6mm pure copper heat pipes with AGHP
• 120mm PWM fan provides 59 CFM airflow
• 5V 3-pin ARGB lighting included
• Supports Intel LGA 1851 and 1700 sockets

Cons

• 67mm height is restrictive for tall RAM sticks
• Only supports AMD AM4, not newer AM5
• Single fan configuration limits total airflow

Good fit if

• You need a cooler under 70mm for a small case
• You use Intel LGA 1700 or 1851 processors
• You want white ARGB aesthetics for your build

Skip if

• You require support for AMD AM5 sockets
• You have tall RAM that blocks a 67mm cooler
• You need a dual-tower design for high-end CPUs

Verdict: Thermalright AXP120-X67 Low-Profile Cooler is a specialized solution for builders with tight clearance constraints. It fits users who prioritize case compatibility and white ARGB styling over raw cooling capacity.

7 Also great

Thermalright Assassin King 120 White ARGB

Best for: Quiet cooling in medium cases with AM5

Socket Compatibility

AM4, AM5, LGA1700/1851/1150/1151/1200

Cooler Height

148mm

Heat Pipes

5

Tower Design

Single-Tower

Fan Size

120mm

Fan Speed

1550rpm±10%

View on Amazon: Thermalright Assassin King 120 White ARGB

The Thermalright Assassin King 120 SE White ARGB is a single-tower CPU air cooler featuring five copper heat pipes and a 120mm PWM fan. It reaches 1550 RPM with a noise level under 25.6 dBA. The 148mm height fits medium cases. It supports AM5 and LGA 1700 sockets. This cooler suits users who want quiet operation and white ARGB lighting without the bulk of a dual-tower design.

Pros

• Five 6mm copper heat pipes with AGHP III technology
• Quiet 120mm PWM fan with 66.17 CFM airflow
• ARGB lighting and white aesthetic finish
• S-FDB bearings for long service life
• Compatible with AM5 and LGA 1700/1851 sockets

Cons

• Single-tower design with only five heat pipes
• 148mm height may restrict RAM clearance
• No software control for ARGB mentioned

Good fit if

• You need a low-profile white cooler for AM5
• You prefer quiet operation under 26 dBA
• You have a medium-sized computer case

Skip if

• You require a dual-tower cooler for high heat loads
• You need software control for RGB lighting
• You have a small form factor case under 148mm

Verdict: The Thermalright Assassin King 120 SE White ARGB is a compact single-tower cooler that fits users needing quiet, white-themed cooling for modern sockets like AM5 and LGA 1700. It is ideal for builds where RAM clearance and noise levels are priorities.

Specifications side by side

Frequently asked questions