Looking Beyond the SilverStone 1U Slim LGA1700 Server? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You might be looking for SilverStone 1U Slim LGA1700 Server alternatives to match your specific chassis constraints. The SilverStone XE01-1700A is designed for 1U systems with a height of just 28mm. It supports LGA1700 sockets and uses an 80mm dual ball bearing fan. This setup provides reliable operation for workstations that need low-profile cooling. However, you may need a different fan size, a passive solution, or support for other sockets like LGA1851 or LGA1200. Some builds require copper heat pipes or vapor chambers for higher thermal loads. Other cases might only fit 2U height coolers for better performance. The alternatives listed here were chosen because their specifications overlap with the original product's core requirements. They cover various socket types, cooling methods, and form factors. This list helps you find a cooler that fits your exact hardware needs without compromising on compatibility or physical dimensions.
Our top pick: SilverStone 1U Slim LGA1700 Server Cooler.
How Each Alternative Compares
SilverStone 1U Low-Profile LGA 1700 CPU Cooler
This SilverStone model shares the 1U height and LGA1700 socket compatibility with your current choice. It also measures 28mm tall, ensuring it fits the same tight chassis constraints. The key difference lies in the fan configuration. While the original uses an 80mm dual ball bearing fan, this budget option relies on a smaller fan to maintain its low profile. This trade-off means slightly reduced airflow potential compared to the 80mm unit. You should pick this if you want a direct SilverStone alternative that prioritizes cost over the specific 80mm fan reliability and noise characteristics of the XE01-1700A.
Dynatron 1U Server Copper CPU Cooler
The Dynatron Q3 also targets 1U LGA1700 systems, but it diverges in material and size. It uses copper for its cooling block, which can offer different thermal transfer properties compared to the original's construction. Its dimensions are 3.15 inches wide and 0.59 inches high, which is significantly thinner than the 28mm (1.1 inch) SilverStone. This extreme thinness allows it to fit in even more restrictive spaces. However, the compact design and copper construction often come with higher noise levels under load. Choose this if your chassis height is below 15mm and you can tolerate more acoustic output for that physical clearance.
SilverStone 2U Active LGA 1700 and LGA 1851 Cooler
This cooler steps up to a 2U form factor, which is double the height of the 1U SilverStone. It measures 2.6 inches tall, meaning it will not fit in 1U chassis. The major advantage is support for both LGA1700 and the newer LGA1851 sockets, offering future-proofing that the original lacks. The larger size allows for better heat dissipation and potentially lower noise levels due to increased surface area. You should consider this only if your workstation chassis supports 2U height. It is ideal if you need broader socket compatibility and can sacrifice the compact 1U footprint for improved thermal headroom.
UOFKIPBA 1U LGA4677 Passive Heatsink
This option is a passive heatsink designed for LGA4677 sockets, not LGA1700. It is a 1U unit, so the height constraint is similar, but the socket mismatch makes it incompatible with your current CPU. It relies on chassis airflow rather than a dedicated fan, resulting in zero noise from the cooler itself. This is suitable only if you are building a server with an LGA4677 processor. For standard LGA1700 workstations, this is not a viable alternative. It serves a niche segment of legacy server builds where silence is critical and the specific socket type matches your hardware requirements.
ETURBEV 1U LGA 1700 Passive Cooler
The ETURBEV LGA1700 passive cooler supports your socket and fits in 1U chassis, but it lacks a fan entirely. It uses a vapor chamber for heat transfer, which is a more advanced technology than the original's standard heatsink design. This allows it to handle high-TDP CPUs without active noise. However, it requires strong case airflow to dissipate heat effectively. You should pick this if you need absolute silence and have a chassis with dedicated intake/exhaust paths. It gives up the active cooling reliability of the 80mm fan in exchange for a silent, vapor-chamber-based solution that depends on ambient airflow.
ETURBEV 1U Passive LGA 1200 CPU Cooler
This ETURBEV model is a passive cooler for LGA1200 and LGA115x sockets, not LGA1700. It is a 1U unit, so it fits the same physical space as the original. However, the socket incompatibility means it cannot cool your CPU. It is designed for legacy systems or specific workstation configurations using older Intel platforms. If you are building with an LGA1700 processor, this product is irrelevant. It is only worth a look if you are maintaining or building a system with an LGA1200 CPU and need a silent, low-profile passive cooling solution that fits within 1U height restrictions.
Quick picks
Our 7 picks
SilverStone 1U Slim LGA1700 Server Cooler
Best for: 1U LGA1700 workstations
- Socket Compatibility
- LGA1700
- Cooler Height
- 28mm
- Fan Size
- 80mm
- System Type
- Server, Workstation
- Server Height
- 1U
View on Amazon: SilverStone 1U Slim LGA1700 Server Cooler Affiliate link
The SilverStone XE01-1700A is a 1U server cooler built for Intel LGA1700 processors. It stands just 28mm tall, fitting into flat chassis. An 80mm dual ball bearing fan provides cooling with PWM control. The reinforced back plate uses spring bolts for secure mounting. This design suits workstations needing reliable airflow in tight spaces without excessive height.
Pros
- 28mm height fits 1U systems
- 80mm dual ball bearing fan
- PWM controlled fan speed
- Reinforced back plate with spring bolts
- Compatible with Intel LGA1700 sockets
Cons
- 80mm fan size limits airflow compared to larger units
- 28mm height restricts heatsink surface area
- No mention of RGB lighting or software control
Good fit if
- You need a cooler under 30mm tall
- You use an Intel LGA1700 processor
- You require a 1U server form factor
Skip if
- You need active cooling for high-TDP gaming CPUs
- You require RGB lighting effects
- You use a motherboard socket other than LGA1700
Verdict: SilverStone XE01-1700A 1U LGA1700 Cooler is a compact solution for 1U workstations. It fits users who prioritize low profile and reliable fan operation over maximum cooling performance.
SilverStone 1U Low-Profile LGA 1700 CPU Cooler
Best for: 1U LGA1700 server workstations
- Socket Compatibility
- LGA1700, LGA1851
- Cooler Height
- 28mm
- Tower Design
- Low-Profile
- Fan Size
- 80mm
- System Type
- Server, Workstation
- Server Height
- 1U
View on Amazon: SilverStone 1U Low-Profile LGA 1700 CPU Cooler Affiliate link
The SilverStone XE01-1700A is a 1U server cooler standing 28mm tall. It supports LGA1700 and LGA1851 sockets. The unit uses an 80mm fan with dual ball bearings. This design fits low-profile systems. You get PWM control for speed adjustment. The 8-pole motor aims for smooth operation. It suits workstations needing compact cooling.
Pros
- 28mm low-profile height for 1U cases
- Supports LGA1700 and LGA1851 sockets
- 80mm fan with dual ball bearings
- PWM function for speed control
Cons
- Small 80mm fan size limits airflow
- Only 28mm height restricts heat dissipation
- No mention of thermal paste included
Good fit if
- You need a 1U server cooler
- You use LGA1700 or LGA1851 CPUs
- You require a 28mm low-profile design
Skip if
- You need high airflow for overclocking
- You require a larger 120mm fan
- You want a passive heatsink
Verdict: SilverStone 28mm Low-Profile Cooler fits 1U systems with LGA1700 processors. It offers reliable low-profile cooling for workstations. The small fan suits tight spaces but limits performance.
Dynatron 1U Server Copper CPU Cooler
Best for: 1U LGA1700 server builds needing copper cooling
- Socket Compatibility
- LGA 1700
- System Type
- Server
- Server Height
- 1U
- Dimensions
- 35.4 × 3.15 × 0.59 inches
- Weight
- 15.7 ounces
View on Amazon: Dynatron 1U Server Copper CPU Cooler Affiliate link
The Dynatron Q3 is a 1U CPU cooler built for LGA1700 sockets. It uses a copper heatsink with skiving fins for efficient heat transfer. The unit measures 0.59 inches in height, fitting standard 1U chassis. It runs at 59.14 dBA at 100% duty cycle. This cooler suits server builds requiring low-profile cooling for modern Intel processors.
Pros
- Copper heatsink with skiving fins
- Fits 1U server height constraints
- Compatible with LGA1700 sockets
- Double ball bearing fan
Cons
- Noise level reaches 59.14 dBA at full speed
- Fixed fan speed with no adjustable settings listed
- No mention of PWM or voltage control options
Good fit if
- You need a 1U solution for an LGA1700 server
- You prioritize copper heat dissipation over fan silence
- You require a simple passive or single-speed active cooler
Skip if
- You need quiet operation below 50 dBA
- You want adjustable fan curves or PWM control
- You are building a desktop PC instead of a server
Verdict: Dynatron Q3 1U LGA1700 Server Cooler delivers reliable thermal performance for 1U server racks. It fits users who need LGA1700 support and copper cooling in a slim profile, accepting higher noise for compactness.
SilverStone 2U Active LGA 1700 and LGA 1851 Cooler
Best for: 2U LGA1700/LGA1851 workstations
- Socket Compatibility
- LGA1700, LGA1851
- Heat Pipes
- 4
- TDP Rating
- 150W
- Fan Speed
- 10,000RPM
- System Type
- Server, Workstation
- Server Height
- 2U
View on Amazon: SilverStone 2U Active LGA 1700 and LGA 1851 Cooler Affiliate link
This Silverstone cooler is designed for 2U server chassis and supports LGA1700 and LGA1851 sockets. It handles up to 150W TDP using four 6mm heat pipes and aluminum fins. The dual ball bearing fan reaches 10,000 RPM for high airflow. It fits systems needing robust cooling in a compact 2U form factor. You get a reliable solution for workstation environments with a long mean time between failures.
Pros
- Supports LGA1700 and LGA1851 sockets
- Four 6mm heat pipes for efficient heat transfer
- Dual ball bearing fan with PWM control
- Rated for 150W TDP
- 198,000 hours MTTF reliability
Cons
- Requires 2U chassis space, not 1U
- Noise level reaches 57.5 dBA at max speed
- Larger physical dimensions than 1U options
Good fit if
- You need a 2U server cooler for LGA1700
- You have a 2U chassis available
- You require support for LGA1851 sockets
Skip if
- You are limited to 1U chassis height
- You need silent operation under load
- You require a passive cooling solution
Verdict: Silverstone 2U LGA1700 Server Cooler is a high-performance option for 2U workstations. It suits users who need LGA1851 support and can accommodate its 2U height and noise profile.
UOFKIPBA 1U LGA4677 Passive Heatsink
Best for: 1U LGA4677 server builds with chassis airflow
- Socket Compatibility
- LGA4677
- System Type
- Server, Workstation
- Server Height
- 1U
- Cooling Method
- Passive
View on Amazon: UOFKIPBA 1U LGA4677 Passive Heatsink Affiliate link
This heatsink is a 1U rackmount cooler designed for high-density server and workstation enclosures. It relies on passive heat dissipation, using your system chassis airflow to keep processors cool without dedicated heatsink fans. Engineered specifically for LGA4677 sockets, it gives you a compact enterprise profile if your deployment moves past standard desktop platforms into high-density rack hardware.
Pros
- Fits slim 1U server and workstation chassis
- Passive cooling design eliminates onboard fan failure points
- Dedicated socket compatibility for Intel LGA4677 processors
Cons
- Supports only LGA4677 sockets and lacks LGA1700 compatibility
- Passive design requires high-airflow chassis fans to operate effectively
Good fit if
- You run an LGA4677 workstation or server build in a 1U chassis.
- You have high-airflow chassis fans to move air across passive heatsinks.
Skip if
- You need a cooler for an Intel LGA1700 motherboard socket.
- You want an active cooler with an integrated cooling fan.
Verdict: UOFKIPBA 1U Passive LGA4677 Server Heatsink fits administrators building high-density 1U LGA4677 rackmount systems with directed chassis airflow. It delivers a fanless footprint specifically tailored for enterprise server and workstation hardware.
ETURBEV 1U LGA 1700 Passive Cooler
Best for: high-TDP LGA1700 passive server cooling
- Socket Compatibility
- LGA1700
- TDP Rating
- 180W
- System Type
- Server
- Server Height
- 1U
- Cooling Method
- Passive
- Features
- Vapor Chamber
View on Amazon: ETURBEV 1U LGA 1700 Passive Cooler Affiliate link
This ETURBEV cooler is a 1U passive heatsink designed for LGA1700 sockets in server environments. It uses a vapor chamber base to manage heat without fans. The unit is rated for a TDP of up to 180W. You need active case airflow to use it effectively. It suits workstations requiring silent, low-profile cooling for high-power CPUs.
Pros
- Vapor chamber base for efficient heat transfer
- Supports LGA1700 socket compatibility
- 1U height fits small form factor cases
- Rated for 180W TDP
Cons
- Passive design requires strong case airflow
- No included fans for cooling
- Limited to LGA1700 socket type
Good fit if
- You need a silent 1U server cooler
- Your case has high static pressure fans
- You use an LGA1700 processor
Skip if
- You need a self-contained cooling solution
- Your case lacks sufficient airflow
- You use a non-LGA1700 socket
Verdict: ETURBEV LGA1700 1U Passive Cooler offers a vapor chamber solution for high-TDP LGA1700 CPUs in 1U chassis. It fits users who can provide dedicated airflow for passive heat dissipation.
ETURBEV 1U Passive LGA 1200 CPU Cooler
Best for: LGA1200 1U passive server cooling
- Socket Compatibility
- LGA1150, 1151, 1155, 1156, LGA1200
- System Type
- Server, Workstation
- Server Height
- 1U
- Cooling Method
- Passive
View on Amazon: ETURBEV 1U Passive LGA 1200 CPU Cooler Affiliate link
This is a 1U passive CPU cooler designed for server and workstation builds. It supports LGA1150, LGA1151, LGA1155, LGA1156, and LGA1200 sockets. The unit relies on case airflow rather than an integrated fan. It fits standard 1U chassis dimensions. You should consider this if you need a low-profile solution for older or specific server platforms that do not require active cooling components.
Pros
- Supports LGA1200 and legacy LGA115x sockets
- 1U form factor for compact server cases
- Passive design requires no dedicated fan power
- Compatible with server and workstation systems
Cons
- Passive cooling limits performance under heavy loads
- No included fan for active heat dissipation
- Single color option with no aesthetic variety
Good fit if
- You are building a 1U server chassis
- You need LGA1200 or LGA115x socket support
- You rely on case airflow for cooling
Skip if
- You need active cooling for high TDP CPUs
- You require LGA1700 socket compatibility
- You want a cooler with an included fan
Verdict: ETURBEV 1U Passive LGA1200 Heatsink fits users who need a low-profile passive solution for LGA1200 or legacy LGA115x sockets in 1U server cases. It is not suitable for LGA1700 builds or high-performance workloads.
Specifications side by side
| Spec | SilverStone 1U Slim LGA1700 Server Cooler | SilverStone 1U Low-Profile LGA 1700 CPU Cooler | Dynatron 1U Server Copper CPU Cooler | SilverStone 2U Active LGA 1700 and LGA 1851 Cooler | UOFKIPBA 1U LGA4677 Passive Heatsink | ETURBEV 1U LGA 1700 Passive Cooler | ETURBEV 1U Passive LGA 1200 CPU Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA1700 | LGA1700, LGA1851 | LGA 1700 | LGA1700, LGA1851 | LGA4677 | LGA1700 | LGA1150, 1151, 1155, 1156, LGA1200 |
| Cooler Height | 28mm | 28mm | not stated | not stated | not stated | not stated | not stated |
| Heat Pipes | not stated | not stated | not stated | 4 | not stated | not stated | not stated |
| Tower Design | not stated | Low-Profile | not stated | not stated | not stated | not stated | not stated |
| Fan Size | 80mm | 80mm | not stated | not stated | not stated | not stated | not stated |
| TDP Rating | not stated | not stated | not stated | 150W | not stated | 180W | not stated |
| Fan Speed | not stated | not stated | not stated | 10,000RPM | not stated | not stated | not stated |
| System Type | Server, Workstation | Server, Workstation | Server | Server, Workstation | Server, Workstation | Server | Server, Workstation |
| Server Height | 1U | 1U | 1U | 2U | 1U | 1U | 1U |
| Cooling Method | not stated | not stated | not stated | not stated | Passive | Passive | Passive |
| Features | not stated | not stated | not stated | not stated | not stated | Vapor Chamber | not stated |
| Dimensions | not stated | 3.54 × 3.54 × 1.1 inches | 35.4 × 3.15 × 0.59 inches | 3.74 × 3.74 × 2.6 inches | not stated | not stated | not stated |
| Weight | not stated | not stated | 15.7 ounces | not stated | not stated | not stated | not stated |
| Model | 90262 | SST-XE01-1700A | Q3 | SST-XE02-1700S | UOFKIPBA | not stated | ETURBEV |
| Size | not stated | not stated | not stated | 2U | not stated | not stated | not stated |
| Color | not stated | not stated | not stated | not stated | Other | not stated | One Color |
Frequently asked questions
Can I use a 2U cooler in a 1U server chassis?
No, a 2U cooler will not fit in a 1U chassis. The SilverStone 2U Active LGA 1700 and LGA 1851 Cooler requires a height of 2.6 inches. A 1U system only provides about 1.75 inches of clearance. You must choose a cooler explicitly rated for 1U height to ensure it fits your server rack.
Does the Dynatron Q3 support LGA 1700 sockets?
Yes, the Dynatron Q3 1U Server Copper CPU Cooler supports LGA 1700 sockets. It is designed specifically for 1U server builds requiring copper cooling. The unit measures 0.59 inches in height. This slim profile allows it to fit within tight server chassis constraints while maintaining socket compatibility.
Is there a passive cooling option for LGA 1700 in 1U?
Yes, the ETURBEV 1U Passive LGA 1700 Cooler offers a vapor chamber solution. It is designed for high-TDP LGA1700 CPUs in 1U chassis. This passive heatsink requires dedicated airflow from case fans to dissipate heat effectively. It does not include an integrated fan, relying on external airflow for cooling.
Can I use the ETURBEV LGA 1200 cooler for LGA 1700?
No, the ETURBEV 1U Passive LGA 1200 CPU Cooler is not compatible with LGA 1700. It supports LGA 1200, LGA 1150, and LGA 1151 sockets. You need a cooler explicitly listed for LGA 1700 to ensure proper mounting and thermal contact. Using an incompatible socket cooler will prevent installation.
What is the height difference between 1U and 2U coolers?
A 1U cooler typically measures around 1.1 inches or less, such as the SilverStone 28mm Low-Profile model. A 2U cooler, like the SilverStone 2U Active, stands at 2.6 inches tall. This significant height difference means a 2U unit will physically block components or fail to fit inside a 1U server chassis.
Does the UOFKIPBA heatsink work with LGA 1700 processors?
No, the UOFKIPBA 1U LGA4677 Passive Heatsink is designed for LGA4677 sockets. It does not support LGA 1700 processors. This passive heatsink is intended for specific server builds requiring LGA4677 compatibility. You must select a cooler explicitly rated for LGA 1700 to ensure it mounts correctly to your motherboard.
Which cooler supports both LGA 1700 and LGA 1851?
The SilverStone 2U Active LGA 1700 and LGA 1851 Cooler supports both sockets. It is rated for 2U height systems. This model is suitable for workstations needing flexibility for newer LGA1851 CPUs. It measures 3.74 inches wide and 3.74 inches long, providing a broad base for heat dissipation.