MECCANIXITY Heatsink Copper Pad Shim Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You might need meccanixity heatsink copper pad shim alternatives if your cooling project demands different hardware dimensions or mounting methods. The original MECCANIXITY copper pad shims measure 20mm by 20mm by 1.5mm and come in a six-piece pack. These copper plates withstand temperatures up to 160 degrees Celsius. They work well for bridging flat 1.5mm physical gaps across notebook chips, memory modules, and graphic components that lack built-in thermal mounts.
However, you may require alternative dimensions, brands, or cooling features. A 1.5mm thickness or 20mm square layout does not fit every clearance gap. The 6 alternatives on this list were chosen because their specifications overlap with the original MECCANIXITY plates, sharing pure copper materials and chip-cooling designs. These options offer smaller 15mm by 15mm profiles, thinner 0.8mm shims, console-specific plates bundled with thermal paste, or active copper heatsink units with dedicated fans for server and desktop sockets.
Our top pick: MECCANIXITY 20mm x 20mm x 1.5mm Copper Shims.
Comparing the Alternatives to MECCANIXITY
Intel Socket 478 Copper Core CPU Cooler
The Intel Socket 478 Copper Core CPU Cooler replaces passive gap management with a dedicated active heatsink. Unlike the MECCANIXITY six-piece set of flat 20mm by 20mm by 1.5mm copper plates, this unit includes an integrated 2.5-inch fan and a solid copper core. It actively drives airflow across your processor rather than simply bridging clearance gaps to an existing cooler. However, you give up broad multi-device flexibility. The Intel cooler works only on Socket 478 motherboards, whereas MECCANIXITY shims fit diverse chipsets and memory modules. Choose this Intel cooler if you need a complete thermal replacement for a Socket 478 system instead of standalone spacing shims.
Dynatron Copper LGA1156 Blower Heatsink
The Dynatron K199 heatsink offers a complete active cooling assembly rather than flat thermal spacing material. While the MECCANIXITY set supplies six individual 20mm by 20mm by 1.5mm copper plates for manual gap filling, Dynatron delivers a 12.5-ounce copper heatsink equipped with a dedicated blower fan. Its 1.12-inch height fits restricted chassis clearances while directly cooling your processor. You trade away the flexible application of MECCANIXITY shims, which fit northbridges, memory modules, and varied chipsets. The Dynatron unit mounts specifically to Intel LGA 1156 sockets. Select this model if you need an active, all-in-one copper cooler for an LGA 1156 desktop build instead of individual shims.
Dynatron 1U Active Copper Heatsink
The Dynatron 1U Active Copper Heatsink provides full active cooling designed for LGA 1155 and LGA 1156 server setups. In contrast to MECCANIXITY shims, which are small 20mm by 20mm by 1.5mm passive copper squares, this unit measures 5 inches by 5 inches by 2.5 inches and weighs 15.2 ounces. It incorporates an active fan with dual ball bearings to push heat away directly. You sacrifice the compact versatility of MECCANIXITY shims, which fit graphics cards, memory modules, and small electronic chips. This cooler also cannot fit tight notebook spaces. You should pick this Dynatron cooler if you manage a 1U server chassis running compatible Intel sockets and require dedicated forced-air cooling.
NEW Games Order PS3 Copper Heatsink Shims
NEW Games Order PS3 Copper Heatsink Shims provide two 42mm copper plates measuring 1.2mm thick, bundled directly with Arctic Silver 5 thermal paste. This package spares you from sourcing separate thermal compound, which MECCANIXITY requires. The 1.2mm thickness also serves clearance gaps narrower than the 1.5mm MECCANIXITY profile. What you give up is piece count and small-component flexibility. MECCANIXITY provides six 20mm by 20mm plates suited for diverse ICs, graphics cards, and notebook memory chips. The 42mm size on this set is much larger and intended for console processors. Choose the NEW Games Order set if you are specifically repairing Sony PlayStation 3 processors and want included thermal paste.
Dynatron 1U Copper Blower Heatsink
The Dynatron R13 provides an active cooling solution featuring pure copper skiving and an integrated blower fan. While MECCANIXITY offers passive 20mm by 20mm by 1.5mm copper shims for gap filling, this Dynatron unit is an active thermal cooler designed for 95-watt processors within a 1.1-inch vertical height. It actively moves air across its copper fins to maintain server processor stability. However, you give up the versatile placement of MECCANIXITY shims, which fit notebooks, graphic cards, and discrete chipsets. The Dynatron cooler weighs 1.04 pounds and fits only Intel Socket 2011 Narrow ILM server boards. Choose this model if you need dedicated 1U active server cooling instead of passive copper spacer pads.
JIUWU 15x15x0.8mm Copper Heatsink Shims
JIUWU Copper Heatsink Shims provide a thinner profile and higher piece count than the MECCANIXITY package. This set delivers 20 copper plates sized at 15mm by 15mm with a 0.8mm thickness, weighing 0.32 ounces overall. The smaller 15mm width and thinner 0.8mm gauge make them easier to fit over compact laptop CPUs and GPUs where tighter spacing tolerances exist. You also receive 14 more shims than the six-piece MECCANIXITY set. In exchange, these shims cover less surface area than 20mm square pads and cannot fill gaps requiring 1.5mm thickness. Pick the JIUWU shims if you need slim 0.8mm copper pads in bulk for laptop maintenance.
Quick picks
Our 7 picks
MECCANIXITY 20mm x 20mm x 1.5mm Copper Shims
Best for: bridging 1.5mm gaps in small electronics
- Material
- Copper
- Compatible Device
- Chips, notebooks, memory modules
- Dimensions
- 20mm x 20mm x 1.5mm
View on Amazon: MECCANIXITY 20mm x 20mm x 1.5mm Copper Shims
This MECCANIXITY copper shim pack includes six 20mm by 20mm plates with a 1.5mm thickness. Built from copper, each pad handles temperatures up to 160 degrees to transfer heat from laptop processors, memory modules, graphics chips, or bridge chipsets. You get durable metal shims for small electronic hardware requiring cooling, provided you supply your own adhesive for mounting.
Pros
- Includes six 20mm x 20mm x 1.5mm copper plates
- Withstands temperatures up to 160 degrees
- Fits chips, memory modules, and laptop components
Cons
- Requires separate adhesive for installation
- Copper surface darkens when exposed to air
Good fit if
- You need a 1.5mm thick copper shim to bridge component gaps.
- You have your own thermal adhesive or mounting compound.
- You are cooling laptop chips, memory modules, or north/south bridges.
Skip if
- You need pre-applied adhesive included in the package.
- You require a shim thinner or thicker than 1.5mm for your clearance.
Verdict: MECCANIXITY 20mm x 20mm x 1.5mm Copper Pad Shim provides six durable copper plates rated up to 160 degrees for small electronic heat transfer. It works reliably if you supply your own adhesive and need exact 1.5mm gap spacing.
Intel Socket 478 Copper Core CPU Cooler
Best for: cooling Socket 478 Pentium 4 systems
- Socket Compatibility
- Socket 478
- Material
- Aluminum, Copper core
- Compatible Device
- Intel Pentium 4, Celeron processors
- Fan Size
- 2.5-inch
- Mounting Type
- Heat sink retention clip
- Features
- Fan
This Intel cooler pairs an aluminum heatsink with a solid copper core and an integrated 2.5-inch fan. Built specifically for Socket 478 setups, it attaches with a dedicated retention clip and connects using an 11-inch 3-pin cable. If you need an active thermal unit rather than a flat shim to cool an Intel Pentium 4 or Celeron processor up to 3.40 GHz, this complete cooling assembly fits your legacy hardware.
Pros
- Solid copper core paired with aluminum heatsink
- Integrated 2.5-inch cooling fan
- Long 11-inch 3-pin connector cord
- Includes retention clip mounting hardware
Cons
- Restricted to legacy Socket 478 motherboards
- Uses a 3-pin connector without 4-pin PWM control
Good fit if
- You run an Intel Pentium 4 or Celeron CPU on Socket 478.
- You need an active heatsink with a fan instead of a bare copper pad.
Skip if
- You need a thin copper shim for direct GPU or laptop gap filling.
- You use a modern motherboard socket rather than Socket 478.
Verdict: Intel Socket 478 Copper Core CPU Cooler delivers dedicated active cooling with its copper core and 2.5-inch fan. It serves as a full thermal replacement for compatible Pentium 4 and Celeron systems.
Dynatron Copper LGA1156 Blower Heatsink
Best for: compact Socket LGA1156 Intel desktop builds
- Socket Compatibility
- LGA1156
- Material
- Copper
- Compatible Device
- Intel i5 & i7 CPUs
- Fan Size
- 3-inch
- Dimensions
- 3.35 x 3.21 x 1.12 inches
- Features
- Fan
The Dynatron LGA1156 Copper Heatsink with Blower Fan is an active thermal solution built entirely from copper. Measuring 3.35 by 3.21 by 1.12 inches and weighing 12.5 ounces, it integrates a 3-inch double ball bearing blower fan powered by a 4-pin connector. It suits you if you need an active, low-profile copper cooler for Intel Core i5 or i7 processors on Socket LGA1156 instead of a passive shim.
Pros
- Full copper heatsink construction
- Compact 1.12-inch overall height
- Integrated 3-inch double ball bearing blower fan
- Standard 4-pin fan connector
Cons
- Compatibility restricted strictly to Socket LGA1156
- Heavier 12.5-ounce weight compared to basic shims
Good fit if
- You run an Intel Core i5 or i7 processor on Socket LGA1156.
- You need an active copper heatsink with a low 1.12-inch profile.
Skip if
- You only need a flat copper shim to fill a gap beneath an existing cooler.
- You use a motherboard with a CPU socket other than LGA1156.
Verdict: Dynatron LGA1156 Copper Heatsink with Blower Fan provides an all-in-one copper thermal unit designed for compact Intel LGA1156 setups. It replaces traditional heatsink-and-shim stacks with a direct-mount active cooling unit.
Dynatron 1U Active Copper Heatsink
Best for: 1U LGA 1155 and LGA 1156 servers
- Socket Compatibility
- LGA1155, LGA1156
- Material
- Copper
- Server Height
- 1U
- Cooling Method
- Active
- Dimensions
- 5 x 5 x 2.5 inches
- Features
- Fan
This Dynatron cooler is an all-copper active heatsink built for compact 1U server chassis. It measures 5 by 5 by 2.5 inches and weighs 15.2 ounces. You get an integrated cooling fan equipped with dual ball bearings for active airflow. The mounting hardware specifically supports Intel LGA 1155 and LGA 1156 processor sockets. It fits your build if you need full thermal hardware rather than a standalone copper shim.
Pros
- Solid copper construction
- Integrated fan with dual ball bearings
- Compact 1U server profile at 2.5 inches tall
- Active cooling setup for LGA 1155 and LGA 1156 sockets
Cons
- Socket compatibility limited strictly to LGA 1155 and LGA 1156
- Substantially larger footprint than passive copper shims at 5 by 5 inches
Good fit if
- You need a complete active cooling assembly for an Intel LGA 1155 or LGA 1156 CPU.
- You are building inside a low-profile 1U server chassis.
Skip if
- You only need a thin copper shim to fill a small thermal gap.
- You run modern processor sockets outside of LGA 1155 or LGA 1156.
Verdict: Dynatron 1U Copper Active CPU Cooler delivers dedicated active cooling with dual ball bearings for legacy LGA 1155 and LGA 1156 server setups. It replaces minimal shim pads with a complete copper heatsink solution.
NEW Games Order PS3 Copper Heatsink Shims
Best for: Sony PlayStation 3 processor heatsink repairs
- Material
- 100% copper
- Compatible Device
- Sony Playstation 3 PS3 Fat Slim
- Dimensions
- 6.7 × 4.1 × 1.4 inches
- Weight
- 1 pounds
This kit includes two 100% copper shims paired with a 3.5-gram tube of Arctic Silver 5 thermal paste. Each cut and polished shim measures 42mm by 42mm with a thickness of 1.2mm. Designed to sit between the CPU or GPU and the heatsink, it provides thermal transfer material tailored specifically for Sony PlayStation 3 Fat and Slim consoles. It suits you if you need pre-sized copper plates and paste for console cooling maintenance.
Pros
- Includes two 42mm x 42mm copper shims
- Includes a 3.5g tube of Arctic Silver 5 thermal paste
- Constructed from 100% cut and polished copper
- Specified 1.2mm thickness fits between processors and heatsinks
Cons
- Fixed 42mm x 42mm dimensions limit use in smaller spaces
- Only provided in a single 1.2mm thickness option
- Compatibility specified strictly for Sony PlayStation 3 Fat and Slim
Good fit if
- You need 42mm by 42mm copper shims with a 1.2mm thickness profile.
- You want bundled Arctic Silver 5 thermal paste included with your shims.
- You are servicing heatsinks on a Sony PlayStation 3 Fat or Slim console.
Skip if
- You require smaller shim sizes like 15mm or 20mm squares.
- You need a thickness other than 1.2mm for your cooling gap.
- You already have thermal paste and only need standalone shims.
Verdict: NEW Games Order 42mm Copper Pad Shims deliver two 1.2mm-thick polished copper plates bundled with Arctic Silver 5 thermal paste. This set gives you dedicated cooling hardware sized specifically for Sony PlayStation 3 processor repairs.
Dynatron 1U Copper Blower Heatsink
Best for: 1U Intel LGA 2011 Narrow ILM builds
- Socket Compatibility
- Intel Socket 2011 (Narrow ILM)
- Material
- Copper1100
- Server Height
- 1U
- Mounting Type
- Captive Mounting
- Dimensions
- 4.06 × 3.15 × 1.1 inches
- Weight
- 1.04 pounds
Dynatron 1U Copper Blower Heatsink gives you an active cooling solution for Intel Socket 2011 Narrow ILM setups. Built from Copper1100 with skiving fins, it features a 1.1-inch profile designed for 1U server chassis. The unit includes a PWM-controlled alloy frame blower, pre-printed Shin-Etsu G751 thermal grease, and captive mounting hardware. It is rated to dissipate CPU power up to 95 watts in compact rackmount builds.
Pros
- Copper1100 construction with skiving fins
- Pre-applied Shin-Etsu G751 thermal grease
- Compact 1.1-inch height for 1U server clearance
- PWM-enabled alloy frame blower with dual ball bearings
Cons
- Restricted to Intel Socket 2011 Narrow ILM motherboards
- Maximum CPU power dissipation capped at 95 watts
Good fit if
- You need a low-profile 1U cooler for an Intel Socket 2011 Narrow ILM board.
- You run a processor with a power rating of 95 watts or less.
Skip if
- You have a Square ILM Socket 2011 motherboard or another socket type.
- You need to cool a CPU that exceeds 95 watts.
Verdict: Dynatron 1U Copper Blower Heatsink provides tailored 1U active thermal management for 95-watt Intel Socket 2011 Narrow ILM systems. Its pure copper skiving design and integrated blower deliver reliable cooling within strict 1.1-inch vertical constraints.
JIUWU 15x15x0.8mm Copper Heatsink Shims
Best for: laptop CPU and GPU thermal gap filling
- Material
- High Purity Copper
- Compatible Device
- Laptop GPU and CPU
- Dimensions
- 15mm x 15mm x 0.8mm
- Length
- 0.59 inches
- Width
- 0.59 inches
- Weight
- 0.32 ounces
The JIUWU 15mm x 15mm x 0.8mm Copper Shims provide solid metal heat transfer for laptop components. Each pad measures 15mm by 15mm with a 0.8mm thickness, stamped from high purity copper to interface directly between your laptop CPU or GPU and the heatsink assembly. This 20-piece pack suits you if you need compact, sub-millimeter copper spacers to bridge physical contact gaps during laptop thermal repairs and hardware maintenance.
Pros
- High-purity copper construction
- Thin 0.8mm thickness for tight clearance gaps
- 15mm x 15mm dimensions sized for laptop CPU and GPU dies
- Supplied in a 20-piece pack
Cons
- Fixed 0.8mm thickness does not fit wider gaps
- 15mm x 15mm surface area is too small for desktop processors
Good fit if
- You need 0.8mm thick copper shims to fill laptop heatsink gaps.
- You work on laptop CPU or GPU cooling assemblies requiring a 15mm x 15mm size.
- You want multiple replacement pads in a single 20-count package.
Skip if
- You need shims thicker or thinner than 0.8mm for proper heatsink contact.
- You require larger copper plates to cover desktop CPU heat spreaders.
Verdict: JIUWU 15mm x 15mm x 0.8mm Copper Shims deliver precise 0.8mm thermal spacing tailored for laptop CPU and GPU repairs. The 20-pack format gives you plenty of pure copper shims for multiple compact hardware maintenance jobs.
Specifications side by side
| Spec | MECCANIXITY 20mm x 20mm x 1.5mm Copper Shims | Intel Socket 478 Copper Core CPU Cooler | Dynatron Copper LGA1156 Blower Heatsink | Dynatron 1U Active Copper Heatsink | NEW Games Order PS3 Copper Heatsink Shims | Dynatron 1U Copper Blower Heatsink | JIUWU 15x15x0.8mm Copper Heatsink Shims |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | Socket 478 | LGA1156 | LGA1155, LGA1156 | not specified | Intel Socket 2011 (Narrow ILM) | not specified |
| Material | Copper | Aluminum, Copper core | Copper | Copper | 100% copper | Copper1100 | High Purity Copper |
| Server Height | not specified | not specified | not specified | 1U | not specified | 1U | not specified |
| Cooling Method | not specified | not specified | not specified | Active | not specified | not specified | not specified |
| Compatible Device | Chips, notebooks, memory modules | Intel Pentium 4, Celeron processors | Intel i5 & i7 CPUs | not specified | Sony Playstation 3 PS3 Fat Slim | not specified | Laptop GPU and CPU |
| Fan Size | not specified | 2.5-inch | 3-inch | not specified | not specified | not specified | not specified |
| Dimensions | 20mm x 20mm x 1.5mm | not specified | 3.35 x 3.21 x 1.12 inches | 5 x 5 x 2.5 inches | not specified | not specified | 15mm x 15mm x 0.8mm |
| Mounting Type | not specified | Heat sink retention clip | not specified | not specified | not specified | Captive Mounting | not specified |
| Features | not specified | Fan | Fan | Fan | not specified | not specified | not specified |
| Weight | not specified | not specified | 12.5 ounces | 15.2 ounces | 1 pounds | 1.04 pounds | 0.32 ounces |
| Length | not specified | not specified | not specified | not specified | not specified | not specified | 0.59 inches |
| Width | not specified | not specified | not specified | not specified | not specified | not specified | 0.59 inches |
| Size | 20mm x 20mm x 1.5mm | not specified | not specified | not specified | Small | not specified | 15mm x 15mm x 0.8mm |
| Model | mea231224ee000534 | CS91249-002 | K199 | K199 | 8541600992 | R13 | GYA032 |
| Color | not specified | not specified | not specified | not specified | Bronze | not specified | not specified |
If you also configure compact workspace gear, you can compare specifications across funmily walking pad treadmill alternatives.
Frequently asked questions
What is a thinner copper shim alternative to MECCANIXITY pads?
You can choose the JIUWU copper heatsink shims if you require a thinner profile. MECCANIXITY plates measure 1.5mm thick, whereas JIUWU shims measure 0.8mm thick. They feature a smaller 15mm by 15mm footprint designed for laptop CPU and GPU thermal gap filling. The pack includes 20 pure copper pieces.
Are there copper shim kits designed specifically for gaming consoles?
Yes, the NEW Games Order copper heatsink shims are tailored specifically for Sony PlayStation 3 processor repairs. This set provides two 1.2mm-thick polished copper plates measuring 42mm across. The package also includes Arctic Silver 5 thermal paste, giving you dedicated hardware to fill thermal gaps on console GPUs without cutting larger plates.
Can you replace thermal copper shims with an active CPU cooler?
You can switch from passive copper shims to an active CPU cooler if your socket and chassis permit. For example, the Intel Socket 478 Copper Core CPU Cooler provides an integrated 2.5-inch fan and copper core for Pentium 4 systems. This unit delivers active airflow directly to the processor instead of bridging gaps to an external heatsink.
Which copper cooler alternative fits a 1U server chassis?
The Dynatron 1U Copper Blower Heatsink model R13 fits 1U server heights. It features a compact 1.1-inch profile and pure copper skiving construction. Designed for 95-watt Intel Socket 2011 Narrow ILM configurations, it uses an integrated blower fan to manage heat in restricted rackmount environments rather than using passive shims.
What is an alternative copper cooler for Socket LGA 1156 motherboards?
The Dynatron Copper LGA1156 Blower Heatsink model K199 provides direct active cooling for Socket LGA 1156 desktop configurations. It features an integrated blower fan, copper construction, and dimensions of 3.21 inches by 3.35 inches by 1.12 inches. It weighs 12.5 ounces and mounts directly to the socket as a full thermal unit.
What options exist for legacy Socket LGA 1155 servers needing copper cooling?
The Dynatron 1U Active Copper Heatsink supports legacy LGA 1155 and LGA 1156 server sockets. It features dual ball bearings and measures 5 inches long, 5 inches wide, and 2.5 inches tall with a weight of 15.2 ounces. This provides an active copper thermal assembly instead of using flat copper shims.
How do shim dimensions affect thermal transfer when replacing MECCANIXITY pads?
Shim thickness and surface dimensions determine thermal interface contact between your chip and heatsink. MECCANIXITY shims measure 20mm by 20mm by 1.5mm, while alternatives like JIUWU measure 15mm by 15mm by 0.8mm. Matching the exact gap thickness ensures proper physical contact without bowing hardware or leaving unbridged spaces.