6 Best Alternatives to the Haojiaho Copper M.2 2280 SSD (2026)

How the alternatives compare

SGTKJSJS Copper M.2 2280 Laptop Heatsink

The SGTKJSJS heatsink is slightly wider at 0.87 inches compared to the Haojiaho’s 0.71 inches. It weighs more at 2.89 ounces, suggesting a denser copper block. Both use pure copper and include thermal pads. This model is taller, which might limit fit in some laptops. It targets users needing low-profile passive cooling. The wider base covers more surface area on standard 2280 drives. You lose the compact footprint of the original. It is a budget-friendly alternative for laptops where height is less critical than width. The extra mass may help absorb heat better in confined spaces.

Icepc 2mm Pure Copper M.2 Heatsink

The Icepc heatsink is significantly thinner at 0.08 inches versus the Haojiaho’s 0.16 inches. It matches the Haojiaho’s weight at 0.99 ounces. Both are pure copper with thermal pads. This ultra-slim design fits tighter laptop clearances where the original is too tall. The width is 0.79 inches, slightly wider than the Haojiaho. It sacrifices some bulk for extreme thinness. You gain compatibility with very low-profile devices. The trade-off is reduced material volume for heat dissipation. It suits users with strict height limits. The model number indicates a specific 2mm thickness variant. It is a premium option for minimal clearance scenarios.

JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink

The JOYJOM heatsink matches the Icepc’s thin profile at 0.08 inches. It is also 0.79 inches wide. It weighs 1.06 ounces, slightly more than the Icepc. Both use pure copper and include thermal pads. This model features a black graphite coating, unlike the bare copper of the Haojiaho. It targets laptops and PS5 consoles. The coating may offer different thermal properties or aesthetics. It fits where space is tight. You get a similar slim form factor with a different surface finish. The weight is comparable to the original Haojiaho. It is a solid choice for users needing a thin, high-conductivity solution for various devices.

Awxlumv Copper Laptop M.2 2280 Heatsink

The Awxlumv heatsink is wider at 0.9 inches and longer at 2.95 inches. It weighs 1.13 ounces. Both use pure copper and include thermal pads. This model uses screw mounting, unlike the Haojiaho’s rubber rings. The larger dimensions provide more surface area for heat dissipation. It suits users who prefer secure screw mounting over adhesive or rings. The wider base covers more of the SSD. It is heavier than the original. You gain stability and potentially better thermal contact. It is ideal for compact laptops where screw holes are available. The larger size may not fit in very tight spaces.

Haojiaho 6mm Pure Copper M.2 2280 Heatsink

The Haojiaho 6mm heatsink is taller at 0.08 inches in the data, but the name says 6mm. The data lists height as 6 inches which is likely an error, but it is thicker than the original 4mm model. It is 21 inches wide in data, likely 0.83 inches. It weighs 1.64 ounces. Both are pure copper with thermal pads. This model offers more thickness for heat dissipation. It fits laptops and PS5 consoles. You get a larger copper block for better cooling. The weight is higher. It suits users with more clearance space. The included thermal pad ensures good contact. It is a robust option for single SSD cooling in various devices.

Haojiaho 67x18x2mm Pure Copper M.2 Heatsink

The Haojiaho 2mm heatsink is thinner at 0.08 inches compared to the original’s 0.16 inches. It is the same width at 0.71 inches. It weighs only 0.56 ounces, half the original. Both are pure copper with thermal pads. This ultra-thin model fits the tightest clearances. It is lighter and easier to install in constrained spaces. You sacrifice some mass for extreme thinness. It is ideal for PS5 consoles or thin laptops. The weight reduction is significant. It maintains the same footprint as the original. It is a compact solution for users with minimal height allowance. The thermal pad is included for effective heat transfer.

Quick picks

Our 7 picks

1 Best overall

Haojiaho Copper M.2 2280 SSD Heatsink

Best for: tight clearance M.2 2280 SSD cooling

Material

Pure copper

Compatible Device

M.2 2280 SSD, PS5, Nintendo Switch

Dimensions

67x18x4mm

Mounting Type

Rubber rings

Features

Thermal Pad

Weight

1.01 ounces

View on Amazon: Haojiaho Copper M.2 2280 SSD Heatsink Affiliate link

This Haojiaho heatsink uses 100% pure copper to dissipate heat from M.2 2280 SSDs. Its compact 67x18x4mm profile fits tight laptop and desktop spaces. The kit includes a silicone thermal pad to bridge the gap between the drive and the cooler. It claims a cooling effect of 5°C to 20°C. You should check your available clearance before buying, as the rubber ring mounting requires specific space.

Pros

• Constructed from 100% pure copper for high thermal conductivity
• Compact 67x18x4mm dimensions fit narrow slots
• Includes a silicone thermal pad for better heat transfer
• Uses flexible rubber rings for easy mounting

Cons

• Very low 4mm height may not cover all SSD components
• Rubber ring mounting offers less stability than screws
• Cooling performance varies by 5°C to 20°C based on environment

Good fit if

• You need a low-profile cooler for tight laptop spaces
• You want pure copper for maximum heat dissipation
• You prefer flexible rubber ring mounting over screws

Skip if

• You require screw-based mounting for stability
• Your case has less than 4mm clearance height
• You need a heatsink for M.2 2242 drives

Verdict: Haojiaho Pure Copper M.2 2280 Heatsink is a compact cooling solution for users with tight clearance who prioritize pure copper construction. It suits those who can accommodate its low 4mm height and flexible rubber ring mounting system.

2 Also great

SGTKJSJS Copper M.2 2280 Laptop Heatsink

Best for: low-profile passive cooling in laptops

Material

100% copper

Compatible Device

M.2 2280 SSD

Mounting Type

Rubber ring, insulation sticker

Features

Thermal Pad

Length

3 inches

Width

0.87 inches

View on Amazon: SGTKJSJS Copper M.2 2280 Laptop Heatsink Affiliate link

This SGTKJSJS heatsink is made from 100% copper and designed for M.2 2280 SSDs in laptops. It requires only 1.5mm of clearance and includes 0.5mm and 1mm thermal pads. The unit measures 3 by 0.87 inches and weighs 2.89 ounces. You get two heatsinks with rubber rings and insulation stickers for mounting. It aims for a 10-20°C temperature drop in compact spaces.

Pros

• Constructed from 100% pure copper
• Ultra-low 1.5mm installation height
• Includes 0.5mm and 1mm thermal pads
• Fits standard M.2 2280 SSDs

Cons

• No active fan for forced airflow
• Limited to passive cooling only
• No RGB lighting or smart features

Good fit if

• You need a low-profile solution for thin laptops
• You want passive cooling for M.2 2280 drives
• You prefer pure copper construction for heat dissipation

Skip if

• You require active fan cooling
• You need RGB lighting effects
• You have less than 1.5mm of clearance

Verdict: SGTKJSJS 2280 M.2 Copper Heatsink fits users needing low-profile passive cooling for M.2 2280 SSDs in laptops. It suits those prioritizing pure copper construction and minimal height over active airflow.

3 Also great

Icepc 2mm Pure Copper M.2 Heatsink

Best for: tight laptop spaces with standard SSDs

Material

Pure Copper

Compatible Device

M.2 2280 SSD, Laptop PC

Dimensions

70x20x2mm

Mounting Type

Silicone Based Thermal Pad

Weight

0.99 ounces

View on Amazon: Icepc 2mm Pure Copper M.2 Heatsink Affiliate link

This Icepc heatsink is built from pure copper for better thermal conductivity than aluminum. It measures 70x20mm with a 2mm thickness. The kit includes a silicone thermal pad to protect your SSD chips. It is designed for laptops and narrow spaces where airflow is limited. You get a compact solution that dissipates heat through direct air contact.

Pros

• Pure copper material offers 401W/mk thermal conductivity
• Compact 2mm thickness fits tight laptop spaces
• Includes silicone thermal pad for chip protection
• Optimized air duct design for faster heat exchange

Cons

• 2mm height provides less surface area than thicker alternatives
• No mounting screws included in this specific variation
• Only supports 70x20mm SSD dimensions

Good fit if

• You need a low-profile heatsink for a laptop
• You want pure copper for superior heat transfer
• You have a 70x20mm M.2 SSD

Skip if

• You require a thicker heatsink for maximum cooling
• You need a kit with included mounting screws
• You have an SSD larger than 70x20mm

Verdict: Icepc 2mm Pure Copper M.2 Heatsink is a slim, conductive option for users with tight clearance and standard 70x20mm drives. It suits those prioritizing material quality over bulk.

4 Best budget

JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink

Best for: tight laptop spaces and PS5 installations

Material

Pure Copper

Compatible Device

M.2 2280 SSD, Laptop, PS5

Dimensions

70x20x2mm

Features

Thermal Pad

Weight

1.06 ounces

View on Amazon: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink Affiliate link

This JOYJOM heatsink uses pure copper for efficient heat transfer, covered in graphite to reduce glare. It measures 70x20x2mm, making it ideal for tight laptop spaces. The package includes a silicone thermal pad and mounting bandages. It targets M.2 2280 SSDs in laptops and PS5 consoles. You get a low-profile solution that helps keep your drive cool without adding bulk.

Pros

• Pure copper construction for superior thermal conductivity
• Low 2mm profile fits tight laptop bays
• Graphite coating reduces visual glare
• Includes silicone thermal pad and mounting bandages

Cons

• 2mm thickness limits contact area compared to thicker models
• No mounting screws included, relying on bandages
• Graphite coating may wear or flake over time

Good fit if

• You need a low-profile heatsink for a laptop
• You want pure copper for better heat dissipation
• You are installing in a PS5 or desktop with limited height

Skip if

• You require mounting screws for a more secure fit
• You need a thicker heatsink for maximum surface area
• You prefer aluminum over copper for weight savings

Verdict: JOYJOM Pure Copper M.2 Heatsink 70x20x2mm is a solid choice for users needing a thin, high-conductivity solution for laptops or PS5 drives. It fits well where space is tight and performance matters.

5 Also great

Awxlumv Copper Laptop M.2 2280 Heatsink

Best for: compact laptop M.2 2280 SSD cooling

Material

100% copper

Compatible Device

M.2 2280 SSD

Mounting Type

Mounting Screw

Features

Thermal Pad

Length

2.95 inches

Width

0.9 inches

View on Amazon: Awxlumv Copper Laptop M.2 2280 Heatsink Affiliate link

This is a 100% copper heatsink designed for M.2 2280 SSDs in laptops and desktops. It measures 0.9 by 2.95 inches and weighs 1.13 ounces. The kit includes 0.5mm and 0.8mm nano thermal pads rated at 5 W/m.K. It uses a mounting screw for secure attachment. You get a cooling effect of 10-20°C depending on your environment. It fits standard 2280 drives like Samsung and PS5 models.

Pros

• Made of 100% pure copper with 401 W/m.K conductivity
• Includes 0.5mm and 0.8mm nano thermal pads
• Mounts securely with screws rather than adhesive
• Compact 0.02-inch thickness fits tight laptop spaces

Cons

• Cooling performance varies based on your specific environment
• Requires manual installation with a screwdriver
• Does not include a rubber isolation layer

Good fit if

• You need a low-profile solution for a laptop
• You want reliable copper conductivity over aluminum
• You prefer screw mounting for stability

Skip if

• You need a plug-and-play adhesive strip
• You are using an M.2 2242 or 2260 drive
• You want a heatsink with a built-in fan

Verdict: Awxlumv 2280 Copper Heatsink with Pads offers solid thermal performance for users who prioritize pure copper construction and secure screw mounting in compact laptops.

6 Best premium

Haojiaho 6mm Pure Copper M.2 2280 Heatsink

Best for: single M.2 2280 SSD cooling in laptops or consoles

Material

Pure copper

Compatible Device

M.2 2280 SSD, PS5, Nintendo Switch

Dimensions

70 x 21 x 6 mm

Features

Thermal Pad

Weight

1.64 ounces

View on Amazon: Haojiaho 6mm Pure Copper M.2 2280 Heatsink Affiliate link

This Haojiaho heatsink is a pure copper block measuring 70 x 21 x 6 mm. It includes a silicone thermal pad to bridge the gap between your M.2 2280 SSD and the cooler. The design targets laptops, PS5 consoles, and Nintendo Switch units. You get reliable heat dissipation for devices that generate significant thermal load during use.

Pros

• Made from 100% pure copper for high thermal conductivity
• Includes a silicone thermal pad for better heat transfer
• Compatible with M.2 2280 SSDs, PS5, and Nintendo Switch
• Dimensions of 70 x 21 x 6 mm fit standard slots

Cons

• 6 mm thickness may not fit in ultra-thin laptop chassis
• Sold as a single unit rather than a multi-pack
• Cooling effect varies from 5°C to 20°C depending on environment

Good fit if

• You need a pure copper heatsink for an M.2 2280 SSD
• You want to cool a PS5 or Nintendo Switch drive
• You have sufficient vertical clearance for a 6 mm block

Skip if

• You require a multi-pack of heatsinks for multiple drives
• Your device has less than 6 mm of vertical space
• You prefer aluminum alloy over pure copper material

Verdict: Haojiaho 70x21x6mm Copper M.2 Heatsink is a solid option for users who need a single, high-quality copper block for an M.2 2280 SSD or console expansion. It works well if you have the space for its 6 mm height and value the included thermal pad.

7

Haojiaho 67x18x2mm Pure Copper M.2 Heatsink

Best for: tight clearance M.2 or console cooling

Socket Compatibility

M.2 2280 SSD

Material

Pure Copper

Dimensions

67x18x2mm

Compatible Device

Laptop, PS5, M.2 SSD

Features

Thermal Pad

Weight

0.56 ounces

View on Amazon: Haojiaho 67x18x2mm Pure Copper M.2 Heatsink Affiliate link

This Haojiaho heatsink is a 67x18x2mm pure copper block for M.2 2280 SSDs. It includes a silicone thermal pad to bridge the gap between the drive and the metal. The 2mm thickness allows it to fit in tight spaces, such as PS5 consoles or slim laptops. It claims a 5°C-20°C cooling drop. You should use it when vertical clearance is limited but you still want the thermal benefits of copper over aluminum.

Pros

• Constructed from 100% pure copper for high thermal conductivity
• Ultra-thin 2mm profile fits in tight spaces
• Includes a silicone thermal pad for better heat transfer
• Compatible with M.2 2280 SSDs, PS5, and Switch

Cons

• 2mm thickness limits the total heat dissipation surface area
• No mounting screws included in the package
• Claims vary from 5°C to 20°C cooling effect

Good fit if

• You have very low clearance above your M.2 slot
• You need a heatsink for a PS5 or Switch
• You prefer copper over aluminum for better conductivity

Skip if

• You need a heatsink taller than 2mm for better cooling
• You want a kit with mounting screws included
• You are installing on a desktop with ample airflow

Verdict: Haojiaho 2mm Copper M.2 Heatsink is a compact solution for tight spaces like PS5 consoles. It fits buyers who need a thin copper block with a thermal pad included.

Specifications side by side

Frequently asked questions