6 Best Alternatives to the Cryorig Low Profile Full Copper CPU Cooler (2026)

How each alternative compares

upHere Dual Tower ARGB CPU Cooler

The upHere D6SEC uses a dual-tower design with six heat pipes and ARGB lighting. It measures 6.06 inches in height, which is significantly taller than the Cryorig C5 CU’s 2.15 inches. This extra size allows for stronger airflow in standard ATX cases. You get more cooling capacity but lose the ability to fit in small form factor cases. The copper construction remains consistent with the original. Choose this if your case has ample clearance and you need higher thermal performance than a low-profile unit can provide. The dual-tower layout is less compact but more effective for standard builds.

Cryorig Low-Profile Aluminum Vapor Chamber Cooler

The Cryorig C5 Vapor Chamber Low Profile Cooler shares the same 2.15-inch height as the C5 CU. However, it uses an aluminum fin stack instead of full copper. This material change reduces weight and cost but may lower thermal conductivity slightly. It retains the vapor chamber base for efficient heat transfer. Socket compatibility remains broad, covering AM4, AM5, and Intel LGA sockets. Pick this if you prioritize case compatibility and lightweight design over maximum copper performance. It is ideal for compact AMD builds where the extra weight of copper is unnecessary. The vapor chamber ensures decent cooling despite the aluminum fins.

Rosewill Digital Display CPU Cooler

The Rosewill 120mm Air Cooler with Display features a digital temperature display on the fan hub. It measures 6.3 inches in height, making it unsuitable for low-profile cases. The cooler uses copper heat pipes and a fan for cooling. It supports a wide range of sockets including AM4, AM5, and Intel LGA 1851. The display provides real-time monitoring, which the Cryorig C5 CU lacks. Choose this if you want direct hardware visibility and do not need a compact cooler. It is better for mainstream builds where height is not a constraint. The copper construction offers reliable heat transfer for standard processors.

Thermalright Peerless Assassin 120 Dual Fan Cooler

The Thermalright Peerless Assassin 120 is a dual-tower cooler with six heat pipes and two 120mm fans. It stands 4.92 inches tall, far exceeding the Cryorig C5 CU’s 2.15-inch limit. This design delivers strong thermal performance for LGA 1700 and AM5 CPUs. It uses copper heat pipes for efficient heat dissipation. The cooler is heavier and requires more space inside the case. Select this if you prioritize cooling efficiency over compactness. It is ideal for mid-tower cases where maximum performance is needed. The dual-fan setup provides superior airflow compared to the single fan in the Cryorig model.

Thermalright 47mm Low-Profile CPU Cooler

The Thermalright AXP90 X47 Black is a low-profile cooler with a 47mm height. It is shorter than the Cryorig C5 CU’s 54.6mm but still fits in small cases. It uses a fan for cooling and supports multiple sockets including AM4 and AM5. The black color offers a different aesthetic compared to the copper finish of the original. It is lighter and more compact, making it suitable for extreme small form factor builds. Choose this if you need a cooler that fits in very tight spaces. It sacrifices some cooling headroom for maximum case compatibility. The 47mm height is a good balance between size and performance.

Thermalright AXP90 36mm Low-Profile Cooler

The Thermalright AXP90 X36 is an ultra-compact cooler with a 36mm height. It is significantly shorter than the Cryorig C5 CU, making it ideal for the smallest ITX cases. It uses a fan for cooling and supports standard sockets. The lightweight design makes it easy to install in constrained spaces. However, the 36mm height limits its thermal performance compared to taller coolers. Pick this if your case has extreme height restrictions. It is not suitable for high-TDP CPUs that require more cooling surface area. The compact size ensures compatibility with mini-ITX builds where space is the primary constraint.

Quick picks

Our 7 picks

1 Best overall

Cryorig Low Profile Full Copper CPU Cooler

Best for: compact Mini-ITX and small form factor builds

Socket Compatibility

AM4/AM5, LGA 1150/1200/1851/1700

Cooler Height

54.6 mm

Heat Pipes

5

Tower Design

Low Profile

Lighting

ARGB

Material

Copper

View on Amazon: Cryorig Low Profile Full Copper CPU Cooler Affiliate link

This Cryorig C5 CU is a low-profile CPU cooler designed for small form factor builds. It features a full copper fin stack and a vapor chamber base for efficient heat distribution. The unit stands 54.6 mm tall, fitting into tight spaces. It includes five copper heat pipes and an ARGB PWM fan. It supports AMD AM4/AM5 and Intel LGA sockets.

Pros

• Full copper fin stack for superior thermal conductivity
• Vapor chamber base for efficient heat distribution
• Ultra-compact 54.6 mm height for SFF builds
• ARGB PWM fan for quiet operation
• Supports AMD AM4/AM5 and Intel LGA sockets

Cons

• Low profile design limits cooling capacity for high-TDP CPUs
• Only five heat pipes compared to dual-tower competitors
• Single fan configuration restricts airflow volume

Good fit if

• You need a cooler under 55 mm for a Mini-ITX case
• You use an AMD AM4 or AM5 processor
• You prefer full copper construction for heat dissipation

Skip if

• You require high airflow for overclocking or high-TDP chips
• You need a dual-tower design for maximum cooling
• Your case clearance exceeds 60 mm

Verdict: Cryorig C5 CU Low Profile Copper Cooler is the right pick if you are building a compact PC and need a cooler that fits under 55 mm. It delivers solid copper performance in a small footprint.

2 Best dual tower

upHere Dual Tower ARGB CPU Cooler

Best for: Standard ATX builds needing dual-tower cooling

Cooler Height

154 mm

Heat Pipes

6

Tower Design

Dual-Tower

Fan Size

120mm

Fan Speed

1600 RPM

Lighting

ARGB

View on Amazon: upHere Dual Tower ARGB CPU Cooler Affiliate link

The upHere D6SEC is a dual-tower air cooler with six 6mm copper heat pipes. It uses two 120mm PWM fans reaching 1600 RPM for 68.2 CFM airflow. The design includes 5V ARGB lighting and fits most ATX cases. It supports Intel LGA 1700 and AMD AM5 sockets. This cooler suits users needing efficient cooling with aesthetic lighting options.

Pros

• Six 6mm copper heat pipes for effective heat transfer
• Dual 120mm fans provide 68.2 CFM airflow
• Supports 5V 3-Pin ARGB motherboard synchronization
• No fan removal required during installation

Cons

• 154 mm height may not fit small cases
• Limited to 5V ARGB, not 12V
• Does not mention direct touch heat pipe base

Good fit if

• You need a dual-tower cooler for modern sockets
• You want ARGB lighting with your build
• You have an ATX case with 154 mm clearance

Skip if

• You require a low-profile cooler under 120 mm
• You use a case with less than 154 mm CPU cooler clearance
• You prefer a cooler without ARGB lighting

Verdict: The upHere D6SEC Dual Tower ARGB CPU Cooler offers strong airflow and easy installation for standard ATX builds. It is a solid option for users who prioritize dual-tower performance and RGB aesthetics.

3 Best premium

Cryorig Low-Profile Aluminum Vapor Chamber Cooler

Best for: compact AMD AM4/AM5 builds

Socket Compatibility

AM4, AM5, LGA 1150/1200/1851/1700

Tower Design

Low-Profile

Material

Aluminum

Features

Vapor Chamber

Dimensions

3.81 × 3.81 × 2.15 inches

View on Amazon: Cryorig Low-Profile Aluminum Vapor Chamber Cooler Affiliate link

The Cryorig C5 is a low-profile air cooler built around a vapor chamber and an aluminum fin stack. It measures 3.81 by 3.81 by 2.15 inches, making it suitable for small form factor cases. The unit supports AMD AM4 and AM5 sockets, along with Intel LGA 1150, 1200, and 1851. You should choose this if you need compact cooling for a modern AMD or Intel processor without the bulk of a dual-tower design.

Pros

• Vapor chamber heat transfer technology
• Compact 2.15-inch height fits small cases
• Supports AMD AM4 and AM5 sockets
• Aluminum fin stack construction

Cons

• Aluminum fins offer lower thermal mass than copper
• Single tower design limits heat dissipation capacity
• No mention of PWM fan speed control

Good fit if

• You are building a compact SFF PC
• You use an AMD AM4 or AM5 processor
• You need a cooler under 3 inches tall

Skip if

• You require maximum cooling performance for high TDP chips
• You prefer copper fin stacks for better heat spread
• You need support for older Intel sockets like LGA 2066

Verdict: Cryorig C5 Vapor Chamber Low Profile Cooler is a specialized solution for compact builds using AMD AM4/AM5 or Intel LGA 1700/1851. It fits users who prioritize case compatibility over raw cooling headroom.

4 Also great

Rosewill Digital Display CPU Cooler

Best for: Users wanting real-time temp display on hardware

Socket Compatibility

LGA 1851/1700/1200, AM5/AM4

Heat Pipes

5

Fan Size

120mm

Fan Speed

2000 RPM

Material

Copper

Features

Fan

View on Amazon: Rosewill Digital Display CPU Cooler Affiliate link

This Rosewill cooler uses five copper heat pipes and a 120mm PWM fan to move heat away from your processor. It includes a built-in digital display so you can check your CPU temperature in real time without extra software. The unit fits Intel LGA 1851 and AMD AM5 sockets, among others. It suits users who want clear temperature data and reliable copper-based cooling in a standard 120mm form factor.

Pros

• Five copper heat pipes for efficient heat transfer
• Built-in digital display for real-time CPU monitoring
• 120mm PWM fan reaches up to 2000 RPM
• Supports Intel LGA 1851 and AMD AM5 sockets

Cons

• Hydraulic bearing fan may have shorter lifespan than fluid dynamic bearing options
• Single tower design limits cooling capacity compared to dual-tower competitors
• 120mm fan size may not fit in small form factor cases

Good fit if

• You want to monitor CPU temperatures directly on the hardware
• You are building on Intel LGA 1851 or AMD AM5 platforms
• You prefer copper heat pipes for better thermal conductivity

Skip if

• You need a low profile cooler under 60mm in height
• You are using a case with limited CPU cooler clearance
• You require a fan with a fluid dynamic bearing for longevity

Verdict: Rosewill 120mm Air Cooler with Display offers practical temperature visibility and solid copper heat transfer for mainstream builds. It fits users who value direct hardware monitoring and standard socket support over extreme overclocking potential.

5 Best lga 1700

Thermalright Peerless Assassin 120 Dual Fan Cooler

Best for: LGA 1700 cooling in standard ATX cases

Socket Compatibility

AM4/AM5, LGA1700/1200/2011/1851

Cooler Height

157mm

Heat Pipes

6

Tower Design

Double tower

Fan Size

120mm

Fan Speed

1550rpm±10%

View on Amazon: Thermalright Peerless Assassin 120 Dual Fan Cooler Affiliate link

This dual-tower air cooler uses six 6mm pure copper heat pipes and a copper base for efficient heat transfer. It includes two 120mm PWM fans spinning at 1550rpm. The unit stands 157mm tall, which limits use in small cases. It supports major Intel and AMD sockets, including LGA 1700. You get strong cooling performance for standard ATX builds.

Pros

• Six 6mm pure copper heat pipes with AGHP technology
• Dual 120mm PWM fans providing up to 66.17 CFM airflow
• Pure copper base with full electroplating reflow welding
• Supports LGA 1700, LGA 1200, AM4, and AM5 sockets

Cons

• 157mm height exceeds the 155mm clearance of many LGA 1700 low-profile cases
• Aluminum fin stack rather than full copper construction
• No included RGB lighting or digital display

Good fit if

• You need reliable cooling for LGA 1700 processors
• You have a standard ATX case with over 160mm clearance
• You prefer silent operation under 25.6dB noise level

Skip if

• You are building in a compact ITX case with height limits under 155mm
• You require RGB lighting synchronization
• You need a cooler that fits under 150mm in height

Verdict: Thermalright Peerless Assassin 120 Dual Tower delivers strong thermal performance for LGA 1700 CPUs in mid-tower cases. It suits builders who prioritize cooling efficiency over compact size.

6 Best black

Thermalright 47mm Low-Profile CPU Cooler

Best for: ITX builds needing a compact black cooler

Socket Compatibility

AM4, AM5, LGA115x/1200/1700/1851

Cooler Height

47mm

Heat Pipes

4

Tower Design

Low-Profile

Fan Size

92mm

System Type

ITX

View on Amazon: Thermalright 47mm Low-Profile CPU Cooler Affiliate link

The Thermalright AXP90 X47 is a low-profile CPU cooler standing 47mm tall. It uses four 6mm heat pipes and a 92mm fan to manage heat. The black nickel plating offers corrosion resistance. It supports modern sockets like AM5 and LGA1700. This model suits users needing a compact black cooler for ITX builds.

Pros

• 47mm total height fits tight cases
• Four 6mm heat pipes for heat transfer
• Black nickel plating for corrosion resistance
• Supports AM5 and LGA1700 sockets
• 92mm PWM fan with low noise

Cons

• Only 47mm height limits large CPU cooling
• Single 92mm fan may struggle with high TDP
• No digital display for temperature monitoring

Good fit if

• You need a low-profile cooler under 50mm
• You build in a small ITX case
• You prefer a black finish for your build

Skip if

• You require a dual-tower design for max cooling
• You need a cooler taller than 50mm
• You want a cooler with a built-in display

Verdict: Thermalright AXP90 X47 Black 47mm Low Profile is a solid choice for ITX builders who need a compact black cooler. It fits well in small cases but may not handle extreme heat loads.

7 Best budget

Thermalright AXP90 36mm Low-Profile Cooler

Best for: Small ITX cases with height limits

Socket Compatibility

AM4, AM5, LGA1150/1151/1200/1700/1851

Cooler Height

36mm

Heat Pipes

4

Tower Design

Low-Profile

System Type

ITX

Features

Fan

View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler Affiliate link

The Thermalright AXP90 X36 is a low-profile CPU cooler standing 36mm tall. It uses four 6mm AGHP heat pipes for efficient heat transfer. The unit includes a slim PWM fan that operates at 22.4 dBA or less. It supports modern AMD AM4 and AM5 sockets alongside Intel LGA 1200 and 1700. This design suits ITX builds where case height is restricted.

Pros

• 36mm total height fits tight cases
• Four 6mm AGHP heat pipes
• Slim PWM fan for low noise
• Supports AM4, AM5, and LGA sockets

Cons

• Single fan limits cooling capacity
• 36mm height restricts RAM clearance
• No digital display or software control

Good fit if

• You need a cooler under 40mm
• You build in an ITX case
• You use AM4 or AM5 CPUs

Skip if

• You require high-end cooling performance
• You have tall RAM sticks
• You need dual-tower design

Verdict: Thermalright AXP90 X36 Low Profile Cooler is a compact solution for small form factor builds. It fits users who prioritize case compatibility over maximum thermal headroom.

Specifications side by side

Frequently asked questions