Looking Beyond the Thermaltake 120mm ARGB White Cooler? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Thermaltake UX400 ARGB White Cooler offers 240W TDP capacity with a non-interference design that prevents memory clearance issues. You might look for thermaltake ux400 argb white cooler alternatives if you need a different height, color, or socket support. This single-tower unit measures 5.98 inches tall and uses a 120mm fan running up to 1800 RPM. It fits a wide range of Intel and AMD platforms with broad compatibility.
The 6 alternatives listed here were chosen because their specs overlap with the original. Some options provide higher static pressure for thick radiators, while others offer lower profiles for small form factor builds. You can find black models for non-white chassis or six-heat-pipe designs for heavier workloads. Each pick shares core traits like ARGB lighting and 120mm fans, ensuring you can swap in a cooler that matches your specific case dimensions or aesthetic needs without sacrificing thermal performance.
Our top pick: Thermaltake 120mm ARGB White Cooler.
How each alternative compares
Montech NX400 ARGB White Tower Cooler
The Montech NX400 ARGB White Tower Cooler uses a thicker 28mm fan to boost static pressure, which helps push air through dense fin stacks. It stands 6.14 inches tall, slightly taller than the Thermaltake’s 5.98-inch profile, so you must check your case clearance. It also weighs 1.64 pounds, heavier than the Thermaltake’s 1.1 pounds. You get four heat pipes and ARGB lighting, similar to the original. This option suits white builds where maximum airflow through fins matters more than low-profile fit.
Jonsbo CA40 Black 120mm ARGB CPU Cooler
The Jonsbo CA40 Black 120mm ARGB CPU Cooler shifts focus from aesthetics to pure thermal output, offering 225W TDP performance. It comes in black, contrasting with the Thermaltake’s white finish. You lose the specific memory clearance guarantee found in the original, but gain strong cooling for high-TDP chips. It supports AM4, AM5, LGA 1851, and LGA 1200 sockets. If you prioritize cooling capacity and RGB sync over matching a white chassis, this black unit provides a practical, performance-focused alternative for your system.
Raijintek ELEOS 12 EVO RBW 120mm Cooler
The Raijintek ELEOS 12 EVO RBW 120mm Cooler increases heat pipe count to six direct-contact copper pipes, improving heat transfer over the Thermaltake’s four pipes. It reaches 6.46 inches in height, requiring more vertical clearance than the Thermaltake’s 5.98 inches. It uses standard RGB lighting rather than the ARGB found in the original. This cooler serves modern Intel and AMD builds well if your case accommodates the taller profile. You trade the non-interference design for increased thermal mass and direct contact with the CPU surface.
Thermalright AXP120-X67 White ARGB Cooler
The Thermalright AXP120-X67 White ARGB Cooler is a low-profile option, standing only 2.64 inches tall compared to the Thermaltake’s 5.98-inch height. It fits compact small-form-factor builds where the original would not fit. It includes six copper heat pipes and ARGB lighting. It supports AM4, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151 sockets. You give up the tall single-tower design and high airflow capacity for a compact footprint. This alternative is best for users needing a white, low-profile solution.
Cooler Master i70C ARGB Low-Profile Cooler
The Cooler Master i70C ARGB Low-Profile Cooler is a downward-airflow design, measuring 2.76 inches in height, much shorter than the Thermaltake’s 5.98 inches. It is strictly for Intel LGA 1700 and 1851 platforms, unlike the Thermaltake’s broad AMD support. It handles chips up to 95W TDP, significantly lower than the Thermaltake’s 240W rating. It features a copper core and ARGB fan in black. This option is for compact black Intel builds where height is the primary constraint, sacrificing thermal headroom for size compatibility.
Cooler Master Hyper 212 Halo White CPU Cooler
The Cooler Master Hyper 212 Halo White CPU Cooler features a 154 mm height, which is taller than the Thermaltake’s 5.98-inch profile. It includes four direct-contact heat pipes and a 27 dBA 120 mm ARGB fan. It supports native AM5 and LGA 1700 mounting. The unit weighs 1.56 pounds, heavier than the Thermaltake. It offers balanced airflow in a white chassis. You gain a proven design with low noise levels but accept a taller footprint and more limited socket compatibility compared to the broader support of the original.
Quick picks
Our 7 picks
Thermaltake 120mm ARGB White Cooler
Best for: standard white builds needing unrestricted memory clearance
- Cooler Height
- 5.98 inches
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120mm
- TDP Rating
- 240W
- Fan Speed
- 1800 RPM
This white single-tower CPU air cooler pairs a 120mm ARGB fan with four 6mm copper heat pipes. It handles thermal loads up to 240W TDP with a fan speed range of 700 to 1800 RPM. The unit measures 5.98 inches tall and uses an offset layout to prevent memory overlap. It suits you if you want a white build that fits mainstream Intel or AMD sockets.
Pros
- 240W TDP thermal capacity
- Four 6mm direct-touch copper heat pipes
- Non-interference design leaves memory slots fully clear
- Wide compatibility including Intel LGA 1851/1700 and AMD AM5/AM4
Cons
- Height of 5.98 inches exceeds low-profile case limits
- Single-fan configuration rather than dual-fan push-pull
Good fit if
- You need a white CPU cooler rated up to 240W TDP.
- You want full memory clearance without heatsink overhang.
- You use an Intel LGA 1851/1700 or AMD AM5/AM4 processor.
Skip if
- You require a low-profile cooler for a slim compact case.
- You want a dual-tower cooling setup.
Verdict: Thermaltake 120mm ARGB White Air Cooler delivers 240W TDP capacity with a non-interference design that prevents memory clearance issues. It provides 700 to 1800 RPM airflow and broad socket support in a standard single-tower footprint.
Montech NX400 ARGB White Tower Cooler
Best for: white mid-tower builds needing thick static-pressure fans
- Socket Compatibility
- AMD AM5/AM4, Intel LGA1851/1700
- Cooler Height
- 156mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120mm
- Lighting
- ARGB
You get a single-tower air cooler in a white finish featuring four heat pipes and a 52-fin heatsink. It includes a 120mm ARGB fan that measures 28mm thick for focused static pressure rather than standard 25mm depths. At 6.14 inches tall, it fits standard mid-tower enclosures. This setup suits you if you need a clean white aesthetic with custom lighting and balanced thermal performance.
Pros
- Thicker 28mm fan provides static-pressure-optimized airflow
- Single-tower heatsink equipped with 52 shaped cooling fins
- Four heat pipes direct heat away from the processor
- Customizable ARGB lighting integrated directly into the fan
Cons
- Height of 6.14 inches precludes installation in slim cases
- Single-fan configuration without an included second fan
Good fit if
- You want an all-white single-tower cooler with ARGB lighting
- You have at least 6.14 inches of cooler clearance in your case
- You prefer a 28mm-thick high-static-pressure cooling fan
Skip if
- You build inside a small-form-factor or low-profile chassis
- You require a dual-tower or six-pipe cooling setup
Verdict: Montech NX400 ARGB White Tower Cooler pairs a 52-fin stack with a 28mm-thick ARGB fan for focused airflow in white PC enclosures. It provides reliable four-pipe cooling provided your chassis clears its 6.14-inch height profile.
Jonsbo CA40 Black 120mm ARGB CPU Cooler
Best for: High TDP cooling in black builds
- Socket Compatibility
- AM5/AM4/Intel LGA115X/1200/1700/1851
- Cooler Height
- 157mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 225W
- Lighting
- ARGB
The Jonsbo CA40 Black is a single-tower air cooler with a 157mm height and 4 copper heat pipes. It carries a 225W TDP rating and includes a 120mm PWM fan. The unit features ARGB lighting that syncs via a 5V header. It supports modern sockets like AM5 and LGA 1700. This cooler suits users who need high thermal performance in a standard tower form factor.
Pros
- 225W TDP rating for high heat dissipation
- 4 copper heat pipes for efficient heat transfer
- 120mm PWM fan with mute series technology
- ARGB lighting syncs via 5V motherboard header
- Supports AM5, AM4, and LGA 1700/1851
Cons
- 157mm height may block tall RAM sticks
- Black color clashes with white PC builds
- No included adapter for 4-pin fan headers
Good fit if
- You need a 225W TDP rated cooler
- You have a black-themed PC case
- You use AM5 or LGA 1700 sockets
Skip if
- You require a white aesthetic for your build
- You have low-profile RAM that exceeds 157mm clearance
- You need a low-profile cooler under 120mm
Verdict: The Jonsbo CA40 Black 120mm ARGB Cooler offers strong 225W thermal performance and broad socket support. It fits users prioritizing cooling capacity and ARGB sync over aesthetic matching.
Raijintek ELEOS 12 EVO RBW 120mm Cooler
Best for: systems fitting a taller six-pipe cooler
- Socket Compatibility
- Intel/AMD Ryzen, LGA 1700
- Heat Pipes
- 6
- Fan Size
- 120mm
- Lighting
- RGB
- Material
- Copper
- Features
- Fan
The Raijintek ELEOS 12 EVO RBW is an air cooler equipped with six 6mm copper direct-contact heat pipes and a 120mm PWM fan. It connects via a 5V addressable RGB header and supports Intel LGA 1700 alongside AMD Ryzen sockets. Standing 6.46 inches tall, it suits you if you want a six-pipe thermal design for modern desktop processors and have enough chassis clearance for a taller tower.
Pros
- Six 6mm copper direct-contact heat pipes
- 120mm PWM fan with direct air tunnel design
- 5V addressable RGB lighting connector
- Compatible with Intel LGA 1700 and AMD Ryzen sockets
Cons
- Height of 6.46 inches requires ample case clearance
- Includes one 120mm fan rather than dual fans
Good fit if
- You need six direct-contact heat pipes for CPU heat transfer.
- You have a PC chassis with over 6.46 inches of cooler clearance.
- You use an Intel LGA 1700 or AMD Ryzen motherboard with a 5V ARGB header.
Skip if
- You build in a compact case with limited vertical clearance.
- You lack a 5V addressable RGB connector on your motherboard.
Verdict: Raijintek ELEOS 12 EVO RBW 120mm Cooler provides six direct-contact copper heat pipes and standard 120mm PWM airflow. It serves modern Intel and AMD builds well if your case accommodates its 6.46-inch height.
Thermalright AXP120-X67 White ARGB Cooler
Best for: compact white small-form-factor PC builds
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
- Lighting
- ARGB
This Thermalright cooler is a compact, top-down air cooler designed for space-constrained cases. Standing 67mm tall, it fits where standard single-tower coolers cannot. You get six 6mm copper heat pipes paired with a pure copper base and a 120mm slim PWM fan. It pushes up to 59 CFM of airflow at 1800 RPM. This setup suits you if you need low-profile clearance alongside addressable RGB lighting for compatible Intel or AMD AM4 motherboards.
Pros
- Low 67mm total height fits tight small-form-factor cases
- Six 6mm pure copper heat pipes with pure copper base
- Slim 120mm PWM fan delivers up to 59 CFM of airflow
- Addressable RGB lighting connects via standard 5V 3-pin header
Cons
- AMD socket support listed only for AM4 without AM5 coverage
- Airflow capped at 59 CFM due to the slim 15mm fan profile
Good fit if
- You build inside a compact case with under 70mm of CPU clearance.
- You run an Intel LGA 1700/1851 or AMD AM4 processor.
- You want top-down downdraft cooling across six copper heat pipes.
Skip if
- You build on an AMD AM5 motherboard.
- You have clearance for a standard tower cooler with a thicker 25mm fan.
Verdict: Thermalright 120mm White Low-Profile Air Cooler delivers six copper heat pipes in a tight 67mm form factor. It provides a compact, lighting-equipped cooling solution for supported Intel and AMD AM4 small-form-factor builds.
Cooler Master i70C ARGB Low-Profile Cooler
Best for: compact black Intel LGA 1700/1851 builds
- Socket Compatibility
- LGA 1700, LGA 1851
- Cooler Height
- 70mm
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- TDP Rating
- 95W
- Fan Speed
- 1,800 RPM
If you want a dark alternative to white coolers, this Cooler Master low-profile unit gives you an anodized black aluminum fin stack with a copper insert base. It stands 70mm tall, making it suitable for tight cases. A 120mm PWM ARGB fan spins from 650 to 1,800 RPM to cool Intel chips up to a 95W TDP. It fits LGA 1700 and LGA 1851 sockets.
Pros
- Compact 70mm height fits low-profile enclosures
- Copper insert base aids heat dissipation up to 95W TDP
- PWM fan offers an adjustable range of 650 to 1,800 RPM
- Frosted fan blades disperse integrated ARGB illumination
Cons
- Compatible only with Intel LGA 1700 and LGA 1851 sockets
- 95W TDP capacity excludes higher-wattage processors
Good fit if
- You build inside a low-profile case requiring a 70mm cooler height.
- You run an Intel Core 3 or Core 5 processor within a 95W TDP limit.
- You prefer an anodized black finish over standard white aesthetics.
Skip if
- You use an AMD motherboard or an unsupported Intel platform.
- You need cooling capacity for CPUs exceeding a 95W TDP.
Verdict: Cooler Master 120mm Low-Profile Black Cooler provides a 70mm downward-airflow option tailored strictly for Intel LGA 1700 and 1851 platforms. Its copper core and PWM ARGB fan serve low-profile systems running chips up to 95W TDP.
Cooler Master Hyper 212 Halo White CPU Cooler
Best for: white AM5 and LGA1700 mid-tower builds
- Socket Compatibility
- LGA1700, 1200, 1150-1156, AM4, AM5
- Cooler Height
- 154 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- Fan Speed
- 2050 RPM ±10%
- Lighting
- ARGB
View on Amazon: Cooler Master Hyper 212 Halo White CPU Cooler
The Cooler Master Hyper 212 Halo is a white CPU air cooler built with four 6mm direct-contact copper heat pipes and an aluminum fin stack. At 154 mm tall, it uses a 120 mm ARGB Gen 2 fan rated for 51.88 CFM airflow, 2.89 mmH2O air pressure, and 27 dBA maximum noise. It suits you if you want a white tower cooler with out-of-the-box AMD AM5 and Intel LGA1700 bracket support.
Pros
- Compact 154 mm total heatsink height
- Four 6 mm direct-contact copper heat pipes
- MF120 Halo2 fan delivers 51.88 CFM airflow at 27 dBA
- Native AM5 and LGA1700 mounting hardware included
Cons
- At 154 mm tall, it will not fit compact low-profile cases
- Single-fan setup with four heat pipes rather than dual fans or six pipes
Good fit if
- You are building an AMD AM5 or Intel LGA1700 system in a white color theme.
- You have a PC case with at least 154 mm of CPU cooler clearance.
- You want an ARGB Gen 2 fan compatible with standard 3-pin motherboard headers.
Skip if
- You need a low-profile cooler under 70 mm for a small form factor case.
- You require six heat pipes for higher heat dissipation.
Verdict: Cooler Master Hyper 212 Halo White CPU Cooler pairs a 154 mm height with native AM5 mounting and four direct-contact heat pipes for reliable everyday cooling. Its 27 dBA 120 mm ARGB fan delivers balanced airflow in a clean white chassis.
Specifications side by side
| Spec | Thermaltake 120mm ARGB White Cooler | Montech NX400 ARGB White Tower Cooler | Jonsbo CA40 Black 120mm ARGB CPU Cooler | Raijintek ELEOS 12 EVO RBW 120mm Cooler | Thermalright AXP120-X67 White ARGB Cooler | Cooler Master i70C ARGB Low-Profile Cooler | Cooler Master Hyper 212 Halo White CPU Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | not specified | AMD AM5/AM4, Intel LGA1851/1700 | AM5/AM4/Intel LGA115X/1200/1700/1851 | Intel/AMD Ryzen, LGA 1700 | not specified | LGA 1700, LGA 1851 | LGA1700, 1200, 1150-1156, AM4, AM5 |
| Cooler Height | 5.98 inches | 156mm | 157mm | not specified | 67mm | 70mm | 154 mm |
| Heat Pipes | 4 | 4 | 4 | 6 | 6 | not specified | 4 |
| Tower Design | Single-Tower | Single-Tower | not specified | not specified | Low-Profile | Low-Profile | not specified |
| Fan Size | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120 mm |
| TDP Rating | 240W | not specified | 225W | not specified | not specified | 95W | not specified |
| Fan Speed | 1800 RPM | not specified | not specified | not specified | 1800 RPM | 1,800 RPM | 2050 RPM ±10% |
| Lighting | ARGB | ARGB | ARGB | not specified | ARGB | ARGB | ARGB |
| Color | White | White | Black | not specified | White | Black | White |
| Material | Copper | not specified | Copper | Copper | not specified | Copper, Aluminum | Aluminum |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 4.92 × 3.62 × 5.98 inches | 4.72 × 2.91 × 6.14 inches | not specified | 2.95 × 5 × 6.46 inches | 4.86 × 4.72 × 2.64 inches | 4.72 × 4.72 × 2.76 inches | 6.06 × 4.88 × 2.87 inches |
| Weight | 1.1 pounds | 1.64 pounds | not specified | 1.34 pounds | 1.34 pounds | 14.5 ounces | 1.56 pounds |
| Model | UX400 ARGB White | NX400ARGBW | CA40 Black | 0R10B00222 | AXP120-X67 WHITE ARGB 1700-d2 | RR-I7C7-18PA-R1 | RR-S4WW-20PA-R1 |
| Size | not specified | NX400 ARGB | not specified | not specified | AXP120 series | 3.40 | V2 |
If you need a matching case for your build, compare cooler height clearances across thermaltake view 170 tg argb alternatives.
Frequently asked questions
What is the best white CPU cooler for standard memory clearance?
The Thermaltake 120mm ARGB White Cooler is the top pick for standard white builds needing unrestricted memory clearance. It delivers 240W TDP capacity with a non-interference design that prevents memory clearance issues. The unit provides 700 to 1800 RPM airflow in a single-tower footprint that fits most mid-tower cases.
Which white tower cooler has four heat pipes?
The Montech NX400 ARGB White Tower Cooler is the best option with four heat pipes. It pairs a 52-fin stack with a 28mm-thick ARGB fan for focused airflow in white PC enclosures. This cooler provides reliable four-pipe cooling, provided your chassis clears its 6.14-inch height profile.
What is the best budget CPU cooler for black builds?
The Jonsbo CA40 Black 120mm ARGB Cooler is the best budget choice for high TDP cooling in black builds. It offers strong 225W thermal performance and broad socket support. This unit fits users prioritizing cooling capacity and ARGB sync over aesthetic matching with white components.
Which cooler is best for systems fitting a taller six-pipe design?
The Raijintek ELEOS 12 EVO RBW 120mm Cooler is the best premium option for systems fitting a taller six-pipe cooler. It provides six direct-contact copper heat pipes and standard 120mm PWM airflow. It serves modern Intel and AMD builds well if your case accommodates its 6.46-inch height.
What is the best cooler for compact white small-form-factor PC builds?
The Thermalright AXP120-X67 White ARGB Cooler is the best choice for compact white small-form-factor PC builds. It delivers six copper heat pipes in a tight 67mm form factor. It provides a compact, lighting-equipped cooling solution for supported Intel and AMD AM4 small-form-factor builds.
Which low-profile cooler is best for compact black Intel builds?
The Cooler Master i70C ARGB Low-Profile Cooler is also great for compact black Intel LGA 1700 and 1851 builds. It provides a 70mm downward-airflow option tailored strictly for these platforms. Its copper core and PWM ARGB fan serve low-profile systems running chips up to 95W TDP.
What is a good white cooler for AM5 and LGA1700 mid-tower builds?
The Cooler Master Hyper 212 Halo White CPU Cooler is another strong option for white AM5 and LGA1700 mid-tower builds. It pairs a 154 mm height with native AM5 mounting and four direct-contact heat pipes. Its 27 dBA 120 mm ARGB fan delivers balanced airflow in a clean white chassis.