Looking Beyond the SLXKSGALM Low Profile CPU Cooler? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Looking beyond the slxksgalm low profile CPU cooler alternatives requires checking if your build needs different specifications. The SLXKSGALM model offers six heat pipes and supports AM4, AM5, LGA 1700, LGA 1200, and LGA 2011 sockets. It is designed for compact ITX cases where space is tight. This low-profile tower design fits users who prioritize small form factors over maximum airflow.
You might want something else if you need higher performance for heavier loads or a different aesthetic. Some alternatives provide dual-tower designs or ARGB lighting that this cooler lacks. The 6 options listed here were chosen because their specs overlap with the original. They include various heat pipe counts, socket compatibilities, and physical dimensions. This list helps you compare practical details like height and material. You can find a better fit for your specific case size or thermal requirements among these selections.
Our top pick: SLXKSGALM Low-Profile 6 Heatpipe Cooler.
How Each Alternative Compares
AKUQOGNP Low Profile 6-Heatpipe Cooler
The AKUQOGNP cooler matches the SLXKSGALM with six heat pipes and identical socket support for AM4, AM5, LGA 1700, and LGA 1200. Both are low-profile units designed for ITX builds. The AKUQOGNP serves as a direct alternative for users who need basic cooling in tight spaces. It does not offer higher airflow for heavy loads. You should choose this if you prefer a different brand while keeping the same compact form factor and socket compatibility. It is not suitable for high-performance gaming rigs.
Thermalright 47mm Full Copper CPU Cooler
The Thermalright AXP90-X47 differs by specifying a 47mm height and full copper construction. It supports a wider range of sockets, including LGA 1851, LGA 1150, and LGA 1151, which the SLXKSGALM lacks. This cooler is ideal for cases with strict height limits. It weighs 1.54 pounds and has a width of 3.74 inches. You should pick this if you need broader socket compatibility or a confirmed copper base. The SLXKSGALM supports LGA 2011, which this model does not list. This Thermalright option is a practical solution for small form factor builds with limited vertical space.
Thermalright Peerless Assassin 120 SE White ARGB
The Thermalright PA120 SE White ARGB is a dual-tower cooler, not a low-profile unit. It measures 4.72 inches in height and width, making it too large for ITX cases. It includes ARGB lighting and a white color scheme. This cooler supports AM4, AM5, LGA 1851, LGA 1700, and LGA 1200. You should choose this for standard ATX builds where space is not a constraint. It delivers stronger cooling for high-TDP CPUs. The SLXKSGALM is for compact builds, while this Thermalright model prioritizes performance and aesthetics over size. It weighs two pounds.
Thermalright Peerless Assassin 120 White
The Thermalright PA120 White is another dual-tower option with a white aluminum finish. It measures 6.18 inches in length and 4.92 inches in height. This cooler supports AM4, AM5, LGA 1851, LGA 1700, and LGA 1200 sockets. It lacks ARGB lighting but offers robust cooling for standard builds. You should pick this if you need strong performance in an ATX case. It is significantly larger than the SLXKSGALM low-profile design. The SLXKSGALM fits ITX systems, while this model suits users who prioritize cooling power and white aesthetics over compact size. It weighs two pounds.
Thermalright Burst Assassin 120 ARGB
The Thermalright Burst Assassin 120 ARGB is a single-tower cooler with ARGB lighting. It measures 6 inches in height and 4.9 inches in length. It supports AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. This model offers broad socket compatibility and solid airflow. You should choose this for standard ATX cases. It is larger than the SLXKSGALM but provides modern features. The SLXKSGALM is for compact ITX builds. This Thermalright option is a practical mid-range choice for users who need wide socket support and do not require a low-profile design. It weighs 1.12 pounds.
Thermalright Peerless Assassin 120 SE White ARGB
The Thermalright Peerless Assassin 120 SE ARGB White is a dual-tower cooler with ARGB lighting. It measures 6.1 inches in length and 4.92 inches in height. It supports AM4, AM5, LGA 1851, LGA 1700, and LGA 1200. This model delivers strong cooling for standard cases. You should pick this if you need performance and white aesthetics. It is not suitable for ITX builds due to its size. The SLXKSGALM is designed for compact spaces. This Thermalright cooler weighs 1.87 pounds and prioritizes cooling power over a small footprint. It is a better choice for standard ATX systems.
Quick picks
Our 7 picks
SLXKSGALM Low-Profile 6 Heatpipe Cooler
Best for: Compact ITX builds on AM4 or LGA 1700
- Socket Compatibility
- LGA 1700/1200/2011, AM4/AM5
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- System Type
- ITX
- Features
- Fan
View on Amazon: SLXKSGALM Low-Profile 6 Heatpipe Cooler Affiliate link
This low-profile cooler uses six copper heat pipes to move heat away from your CPU. It supports LGA 1700, 1200, 2011, AM4, and AM5 sockets. The design fits ITX builds where space is tight. A PWM fan helps manage noise and speed. You get reliable cooling for compact systems without needing a large tower.
Pros
- Six copper heat pipes for efficient heat transfer
- Low-profile tower design fits small cases
- Supports LGA 1700, 1200, 2011, AM4, and AM5
- PWM fan for adjustable speed control
Cons
- Limited to low-profile cooling performance
- No ARGB lighting included
- Single fan configuration may limit airflow
Good fit if
- You are building an ITX PC
- You need socket support for AM4 or LGA 1700
- You have limited case height
Skip if
- You need high-end gaming cooling
- You want RGB lighting effects
- You have a full-tower case
Verdict: SLXKSGALM Low Profile CPU Cooler works well for compact ITX builds on AM4 or LGA 1700. It fits tight spaces but does not offer high airflow for heavy loads.
AKUQOGNP Low Profile 6-Heatpipe Cooler
Best for: ITX builds with LGA 1700 or AM5
- Socket Compatibility
- LGA 1700/1200/2011, AM4/AM5
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- System Type
- ITX
- Features
- Fan
View on Amazon: AKUQOGNP Low Profile 6-Heatpipe Cooler Affiliate link
This is a low profile CPU cooler designed for ITX systems. It uses six copper heat pipes to transfer heat away from the processor. The unit includes a PWM fan for adjustable airflow. It supports modern sockets including AM4, AM5, LGA 1700, and LGA 1200. You should choose this if you need a compact solution for small form factor builds.
Pros
- Six heat pipes for efficient heat transfer
- PWM fan for variable speed control
- Compatible with AM4, AM5, LGA 1700, and LGA 1200 sockets
- Designed specifically for ITX cases
Cons
- Low profile design limits cooling capacity for high-end CPUs
- Single fan configuration restricts airflow options
- Generic brand with limited long-term support data
Good fit if
- You are building an ITX case
- You need support for LGA 1700 or AM5 sockets
- You prioritize compact size over maximum cooling performance
Skip if
- You require a high-end air cooler for overclocking
- You need a cooler with multiple fan mounts
- You prefer established brands with extensive warranty support
Verdict: AKUQOGNP Low Profile 6 Heatpipe Cooler fits users with small ITX cases who need basic cooling for modern sockets. It is not suitable for high-performance gaming rigs.
Thermalright 47mm Full Copper CPU Cooler
Best for: Compact ITX cases with height limits
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1200, 1851
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright 47mm Full Copper CPU Cooler Affiliate link
This low-profile air cooler stands 47mm tall, making it suitable for compact ITX builds. It uses four 6mm copper heatpipes to transfer heat from the CPU. The included 92mm PWM fan operates quietly at 22.4 dBA. It supports modern sockets including LGA 1700, AM5, and LGA 1851. You should choose this if you need a slim cooler that fits in tight cases without sacrificing basic cooling performance.
Pros
- 47mm total height fits small cases
- Four 6mm copper heatpipes
- Quiet 92mm PWM fan at 22.4 dBA
- Supports LGA 1700 and AM5 sockets
Cons
- Only four heatpipes limit peak performance
- 92mm fan may obstruct nearby RAM
- Lower cooling capacity than full-size towers
Good fit if
- You are building an ITX PC
- You need a cooler under 50mm tall
- You use a CPU with moderate power draw
Skip if
- You run high-TDP gaming CPUs
- You have tall RAM sticks
- You need maximum cooling performance
Verdict: Thermalright AXP90-X47 Low Profile Cooler is a practical solution for small form factor builds. It fits cases with limited height while supporting modern processor sockets.
Thermalright Peerless Assassin 120 SE White ARGB
Best for: High-performance ATX builds with white themes
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1851, 1200
- Cooler Height
- 155mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
- TDP Rating
- 120 to 265W
View on Amazon: Thermalright Peerless Assassin 120 SE White ARGB Affiliate link
This dual-tower air cooler features six 6mm copper heat pipes and two 120mm PWM fans. It supports sockets like LGA1700 and AM5 with a TDP rating up to 265W. The white finish and ARGB lighting suit specific builds. It is a practical choice for users needing strong cooling performance in a standard ATX case.
Pros
- Six 6mm pure copper heat pipes with AGHP technology
- Dual 120mm PWM fans providing up to 66.17 CFM airflow
- Supports Intel LGA1700/1200/115X and AMD AM4/AM5 sockets
- White color option with ARGB lighting effects
Cons
- 155mm height may not fit in smaller cases
- Dual-tower design requires clearance for tall RAM sticks
- ARGB lighting requires a compatible motherboard header
Good fit if
- You need high cooling performance for CPUs up to 265W TDP
- You have a standard ATX case with sufficient RAM clearance
- You want a white build with addressable RGB lighting
Skip if
- You are building in a compact ITX case with low clearance
- You require a low-profile cooler for small form factor builds
- You need silent operation below 25.6 dB noise levels
Verdict: Thermalright PA120 SE White ARGB delivers strong cooling for high-TDP CPUs in standard cases. It fits users who prioritize performance and white aesthetics over compact size.
Thermalright Peerless Assassin 120 White
Best for: Standard ATX builds needing strong cooling
- Cooler Height
- 157 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1500 RPM
- Lighting
- ARGB
View on Amazon: Thermalright Peerless Assassin 120 White Affiliate link
The Thermalright PA120 White is a dual-tower air cooler with a 157 mm height. It uses six 6 mm heat pipes and two 120 mm PWM fans. The design allows installation on the first graphics card slot, leaving room for memory chips. It supports Intel LGA 1700 and AMD AM5 sockets. This cooler suits users who need strong cooling performance and ARGB lighting in a standard ATX case.
Pros
- Dual-tower design with 6mm heat pipes
- 157 mm height fits most mid-tower cases
- ARGB lighting with 120 mm PWM fans
- Offset layout clears memory chips
Cons
- 157 mm height exceeds low-profile limits
- Dual-tower build blocks rear exhaust fans
- Requires standard ATX case clearance
Good fit if
- You need strong cooling for high-TDP CPUs
- You have a standard mid-tower case
- You want ARGB lighting effects
Skip if
- You are building a small form factor PC
- You need a low-profile cooler under 60 mm
- You have tight RAM clearance with tall heatsinks
Verdict: Thermalright PA120 White Dual-Tower Cooler delivers robust cooling for standard builds. It fits users who prioritize performance and aesthetics over compact size.
Thermalright Burst Assassin 120 ARGB
Best for: standard ATX cases needing broad socket support
- Socket Compatibility
- AM4, AM5, LGA1700/1851/1150/1151/1200
- Cooler Height
- 154 mm
- Heat Pipes
- 6
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Burst Assassin 120 ARGB Affiliate link
The Thermalright Burst Assassin 120 ARGB is a single-tower CPU air cooler designed for medium-sized cases. It features a 154 mm height, six pure copper heat pipes, and a 120 mm PWM fan. The unit supports modern sockets including AM5 and LGA1700. It offers efficient heat dissipation with a maximum airflow of 66.17 CFM and a noise level under 25.6 dB. This cooler suits users needing reliable cooling without the bulk of a dual-tower design.
Pros
- Six pure copper heat pipes with AGHP technology
- 120 mm PWM fan with up to 66.17 CFM airflow
- Supports AM5 and LGA1700 sockets
- ARGB lighting integration
- S-FDB bearings for long service life
Cons
- 154 mm height may not fit in small cases
- Single tower design limits cooling headroom for high-end CPUs
- Does not include software for ARGB control
Good fit if
- You need a cooler that fits in medium-sized cases
- You want support for the latest AM5 or LGA1700 sockets
- You prefer a single-tower build for easier RAM clearance
Skip if
- You have a compact ITX case with limited CPU cooler height
- You require a dual-tower cooler for extreme overclocking
- You need a low-profile cooler for small form factor builds
Verdict: Thermalright Burst Assassin 120 ARGB Single Tower is a practical mid-range option for users with standard ATX cases who need broad socket compatibility. It provides solid airflow and modern features without the size of larger coolers.
Thermalright Peerless Assassin 120 SE White ARGB
Best for: Standard ATX cases needing strong cooling
- Socket Compatibility
- Intel 115X/1200/1700/1851, AMD AM4/AM5
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 SE White ARGB Affiliate link
This dual-tower air cooler uses six 6mm heat pipes and two 120mm PWM fans to manage heat. It supports modern Intel and AMD sockets. The white finish and ARGB lighting match your build. You get strong cooling performance for standard ATX cases. It leaves space for memory chips. This is a solid option if you need reliable thermal headroom.
Pros
- Dual-tower design with six 6mm copper heat pipes
- Includes two 120mm PWM fans for airflow
- White color with ARGB lighting effects
- Supports Intel LGA 1700/1851 and AMD AM4/AM5
Cons
- Height reaches 155 mm, which may not fit small cases
- Dual-tower width can block adjacent RAM slots
- Does not include software for fan curve control
Good fit if
- You use a standard ATX case with enough height clearance
- You want a white-themed build with RGB lighting
- You need strong cooling for high-end processors
Skip if
- You have a low-profile or SFF case under 160 mm
- You need software control for fan speeds
- You prefer a single-tower design for easier RAM access
Verdict: Thermalright Peerless Assassin 120 SE ARGB White delivers strong cooling for standard cases. It suits builders who need performance and white aesthetics.
Specifications side by side
| Spec | SLXKSGALM Low-Profile 6 Heatpipe Cooler | AKUQOGNP Low Profile 6-Heatpipe Cooler | Thermalright 47mm Full Copper CPU Cooler | Thermalright Peerless Assassin 120 SE White ARGB | Thermalright Peerless Assassin 120 White | Thermalright Burst Assassin 120 ARGB | Thermalright Peerless Assassin 120 SE White ARGB |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 1700/1200/2011, AM4/AM5 | LGA 1700/1200/2011, AM4/AM5 | AM4, AM5, LGA1700, 115X, 1200, 1851 | AM4, AM5, LGA1700, 115X, 1851, 1200 | not stated | AM4, AM5, LGA1700/1851/1150/1151/1200 | Intel 115X/1200/1700/1851, AMD AM4/AM5 |
| Cooler Height | not stated | not stated | 47mm | 155mm | 157 mm | 154 mm | 155 mm |
| Heat Pipes | 6 | 6 | 4 | 6 | 6 | 6 | 6 |
| Tower Design | Low-Profile | Low-Profile | Low-Profile | Double tower | Dual-Tower | Single-Tower | Dual-Tower |
| Fan Size | 120mm | 120mm | 92mm | 120mm | 120 mm | 120 mm | 120mm |
| TDP Rating | not stated | not stated | not stated | 120 to 265W | not stated | not stated | not stated |
| Fan Speed | not stated | not stated | not stated | 1550rpm±10% | 1500 RPM | 1550 RPM | 1550 RPM |
| Lighting | not stated | not stated | not stated | ARGB | ARGB | ARGB | ARGB |
| System Type | ITX | ITX | ITX | not stated | not stated | not stated | not stated |
| Color | One Color | One Color | AXP-90 X47 FULL Cooper | White | White | BA120 ARGB | White |
| Material | not stated | not stated | not stated | not stated | Aluminum | not stated | Aluminum |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | not stated | not stated | 3.72 × 3.74 × 1.85 inches | 4.72 × 0.98 × 4.72 inches | 6.18 × 5.31 × 4.92 inches | 4.9 × 2 × 6 inches | 6.1 × 5.31 × 4.92 inches |
| Weight | not stated | not stated | 1.54 pounds | 2 pounds | 2 pounds | 1.12 pounds | 1.87 pounds |
| Size | One Size | One Size | Height 47mm | 6 Heat Pipe | not stated | 4 Heatpies | 6 Heatpipes |
| Model | SLXKSGALM | AEDVHRYKK | AXP-90 X47 FULL Cooper | PA120 SE WHITE ARGB 1700-D2 | PA120 White-D2 | BA120 ARGB-D1 | PA120 SE WHITE ARGB 1700-d6 |
Another guide worth a look: minorsonic aio CPU cooler alternatives.
Frequently asked questions
Is the SLXKSGALM cooler compatible with AM5 sockets?
Yes, the SLXKSGALM Low-Profile 6 Heatpipe Cooler supports AM5 sockets. It also works with AM4, LGA 1700, and LGA 1200 platforms. This broad compatibility makes it a flexible choice for modern builds. You can use it in compact ITX systems without worrying about socket mismatches. The six heat pipes help manage heat across these different processor architectures effectively.
What is the height of the Thermalright AXP90-X47?
The Thermalright 47mm Full Copper CPU Cooler has a height of 47mm, which is approximately 1.85 inches. This low profile allows it to fit into cases with strict height limitations. It is designed for ITX builds where space is tight. The compact dimensions ensure it does not interfere with RAM or other components in small form factor enclosures.
Do the Thermalright Peerless Assassin coolers have ARGB lighting?
Yes, the Thermalright Peerless Assassin 120 SE White ARGB model features ARGB lighting. This allows you to sync the cooler with your system’s aesthetic. The standard white version and the Burst Assassin 120 ARGB also include lighting options. These features are ideal for builders who want visual customization. The lighting adds style without compromising the cooling performance of the six heat pipes.
Which alternative is best for high-performance ATX builds?
The Thermalright Peerless Assassin 120 White is best for high-performance ATX builds. It delivers robust cooling for standard cases and handles high-TDP CPUs well. Unlike low-profile options, it prioritizes performance over compact size. The dual-tower design with six heat pipes provides strong airflow. This makes it a solid choice for users who need reliable thermal management in larger cases.
How many heat pipes does the AKUQOGNP cooler have?
The AKUQOGNP Low Profile 6-Heatpipe Cooler features six heat pipes. This matches the SLXKSGALM model in terms of heat transfer capacity. It is designed for ITX builds with LGA 1700 or AM5 sockets. The six heat pipes help dissipate heat efficiently in tight spaces. This specification ensures it can handle basic cooling needs for modern processors in compact systems.
Is the Thermalright Burst Assassin suitable for single tower designs?
Yes, the Thermalright Burst Assassin 120 ARGB is a single tower design. It offers a practical mid-range option for standard ATX cases. The single tower structure provides solid airflow without the bulk of larger coolers. It supports broad socket compatibility including AM5 and LGA 1851. This design balances performance and size, making it suitable for users who need efficient cooling in a compact form factor.
Can the SLXKSGALM cooler be used in LGA 1200 systems?
Yes, the SLXKSGALM Low-Profile 6 Heatpipe Cooler supports LGA 1200 sockets. It also works with AM4, AM5, and LGA 1700. This wide range of socket compatibility makes it versatile for various builds. You can install it in compact ITX cases that require low-profile cooling. The six heat pipes ensure effective heat dissipation across all supported platforms.