6 Best Alternatives to the SCYTHE Shuriken 3 92mm Low-Profile (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding suitable scythe shuriken 3 alternatives depends on your chassis clearance and cooling requirements. The SCYTHE Shuriken 3 is designed for compact setups with its 1.5-inch height, AM5 and LGA 1700 support, and zero RAM interference. Its reflow-soldered construction and custom 92mm fan ensure stability and airflow in tight layouts. However, you might prefer a cooler with broader socket compatibility, ARGB lighting, or an all-copper heatsink. If your computer case offers more vertical clearance, you may also want a larger 120mm single-tower or dual-tower design with four to six heat pipes for higher heat dissipation.
This guide covers 6 options for 2026 to fit different enclosures and build priorities. These alternatives were chosen because their specs overlap with the original, featuring shared AM5 and LGA 1700 socket support alongside compact ITX profiles. The list includes both low-profile 47mm models and standard tower heatsinks from brands like Thermalright, Cooler Master, and Iceberg Thermal. Evaluating these physical dimensions, fan sizes, and mounting specs will help you choose the right fit for your system.
Our top pick: SCYTHE Shuriken 3 92mm Low-Profile Cooler.
Comparing SCYTHE Shuriken 3 Alternatives
Cooler Master Hyper 212 Halo CPU Cooler
The Cooler Master Hyper 212 Halo offers ARGB lighting and an aluminum single-tower design with four direct-contact heat pipes. You gain integrated illumination and a full-size tower layout that pushes air horizontally across your chassis. In exchange, you give up the ultra-compact 1.5-inch clearance of the SCYTHE Shuriken 3. The Hyper 212 Halo stands 6.06 inches tall and weighs 1.53 pounds, compared to the 1.06-pound, 1.5-inch Shuriken 3. Both models support AM5 and LGA 1700 sockets. You should choose the Hyper 212 Halo if your enclosure has room for a standard 154 mm tower heatsink and you want ARGB lighting rather than a low-profile heatsink.
Thermalright Peerless Assassin 120 Dual Fan Cooler
The Thermalright Peerless Assassin 120 provides two fin stacks, two 120mm fans, and six heat pipes. It also expands socket compatibility beyond the Shuriken 3 to include AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. However, you give up the zero-interference footprint and short 1.5-inch height of the Shuriken 3. The Peerless Assassin 120 measures 6.18 inches tall and 5.31 inches wide, needing 157mm of vertical case space. You should pick this cooler if you are building in a full-size case that can accommodate dual 120mm towers and you need broader motherboard socket support.
Iceberg Thermal IceSLEET G4 120mm Cooler
The Iceberg Thermal IceSLEET G4 delivers a specified 180W TDP cooling capacity, a 120mm ARGB fan, and quiet 22.5 dBA operation. It also features a clip-free slide-lock fan mount. Compared to the SCYTHE Shuriken 3, you gain higher thermal capacity and built-in lighting. However, you sacrifice compact clearance. The IceSLEET G4 measures 6.14 inches tall, 5.47 inches wide, and 3.19 inches long, whereas the Shuriken 3 stands just 1.5 inches tall. Both units support AM5 and LGA 1700 platforms. You should choose the IceSLEET G4 if you have a standard chassis with over 6.14 inches of cooler clearance and prefer a quiet 120mm tower.
Thermalright 47mm Full Copper CPU Cooler
The Thermalright AXP-90 X47 Full Copper is a dedicated ITX cooler featuring an all-copper heatsink, four heatpipes, and 22.4 dBA operation. It fits older and newer sockets including AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. The Shuriken 3 is slightly shorter at 1.5 inches compared to this cooler's 1.85-inch (47mm) height, and the Shuriken 3 weighs less at 1.06 pounds versus 1.54 pounds. Both focus on compact systems, but the Thermalright provides copper construction and broader socket compatibility. Pick this model if you need an all-copper low-profile cooler for an ITX chassis that supports up to 47mm of cooler height.
Thermalright Peerless Assassin Dual Tower Air Cooler
The Thermalright Peerless Assassin SE utilizes two cooling towers, two 120mm fans, and six copper heat pipes. It supports AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. Compared to the SCYTHE Shuriken 3, it offers a larger dual-fan configuration and wider platform support. However, it gives up the compact low-profile form factor. The heatsink stands 6.1 inches tall and weighs 2 pounds, whereas the Shuriken 3 measures 1.5 inches tall and weighs 1.06 pounds. You should pick this Peerless Assassin SE version if you have a standard case with clearance for a full-height tower and want dual-tower cooling.
Thermalright Assassin X 120 White ARGB
The Thermalright Assassin X 120 SE White ARGB features a single-tower design with four heat pipes, an ARGB fan delivering 66.17 CFM airflow, and a white finish. It also supports AM4, AM5, LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. The SCYTHE Shuriken 3 does not include lighting and has a 92mm fan, but stands only 1.5 inches high. By comparison, the Assassin X 120 SE requires 148mm (5.83 inches) of vertical clearance. At 1 pound, it weighs slightly less than the 1.06-pound Shuriken 3. You should pick this cooler if you want a white ARGB tower heatsink for a mid-sized case.
Quick picks
Our 7 picks
SCYTHE Shuriken 3 92mm Low-Profile Cooler
Best for: ultra-compact AM5 and LGA 1700 builds
- Socket Compatibility
- AM5, LGA1700
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Dimensions
- 3.7 × 3.6 × 1.5 inches
- Weight
- 1.06 pounds
The SCYTHE Shuriken 3 is a compact low-profile air cooler designed for space-constrained builds. At 1.5 inches tall with a 92mm custom fan, it prevents clearance conflicts with your RAM and PCIe slots. Reflow-soldered fins and heat pipes manage thermal transfer across modern processors. You should choose this cooler if you build an ultra-compact small-form-factor system that uses AMD AM5 or Intel LGA1700 motherboards and needs guaranteed component clearance.
Pros
- Low 1.5-inch total height fits compact enclosures
- Reflow-soldered joint between fins and heat pipes
- Zero-interference layout clears RAM and PCIe slots
- Custom 92mm fan features side pressure relief cutouts
Cons
- Socket support limited strictly to AM5 and LGA 1700
- Weighs 1.06 pounds despite compact dimensions
Good fit if
- You need a low-profile cooler standing only 1.5 inches tall.
- You run an AMD AM5 or Intel LGA 1700 motherboard.
- You require zero interference with tall RAM or PCIe cards.
Skip if
- You use CPU sockets outside of AM5 or LGA 1700.
- You have clearance for a larger 120mm tower cooler.
Verdict: SCYTHE Shuriken 3 92mm Low-Profile CPU Cooler delivers a tight 1.5-inch profile with zero memory interference for AM5 and LGA 1700 setups. Its soldered build makes it an efficient cooling option for ultra-small cases.
Cooler Master Hyper 212 Halo CPU Cooler
Best for: standard cases needing full-height 120mm cooling
- Cooler Height
- 154mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 2050 RPM
- Lighting
- ARGB
- Socket Compatibility
- AM5, LGA 1700
The Cooler Master Hyper 212 Halo is a 154 mm tall single-tower heatsink equipped with a 120 mm ARGB fan. It features four 6 mm direct-contact copper heat pipes and delivers up to 51.88 CFM airflow at 2050 RPM. If your chassis can accommodate a standard tower instead of a low-profile cooler, this design offers broad Intel LGA1700 and AMD AM5 compatibility alongside a rated 27 dBA noise level.
Pros
- Four 6 mm direct-contact copper heat pipes
- 120 mm fan with 51.88 CFM airflow and 2.89 mmH2O air pressure
- Maximum rated fan noise output of 27 dBA
- Compatible with both AMD AM5 and Intel LGA1700 sockets
Cons
- 154 mm height requires significantly more case clearance than low-profile models
- Equipped with only one 120 mm cooling fan
Good fit if
- You have at least 154 mm of CPU cooler clearance inside your case.
- You want addressable Gen 2 RGB lighting compatible with 3-pin motherboard headers.
- You need mounting support for modern platforms like AMD AM5 or Intel LGA 1700.
Skip if
- You require a sub-100 mm low-profile cooler for a compact mini-ITX enclosure.
- You need a dual-fan or dual-tower heatsink configuration.
Verdict: Cooler Master Hyper 212 Halo 120mm Cooler trades the compact footprint of low-profile units for a 154 mm single-tower heatsink with four direct-contact heat pipes. It provides reliable airflow and ARGB lighting for cases with standard clearance.
Thermalright Peerless Assassin 120 Dual Fan Cooler
Best for: full-size cases needing maximum dual-tower cooling
- Socket Compatibility
- AM4/AM5, LGA1700/1200/2011/1851
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
- Fan Speed
- 1550rpm±10%
View on Amazon: Thermalright Peerless Assassin 120 Dual Fan Cooler
The Thermalright Peerless Assassin 120 Dual-Tower Cooler is a full-sized heatsink built with two fin stacks, six 6mm copper heat pipes, and two 120mm PWM fans. It stands 157mm tall, delivers up to 66.17 CFM of airflow at 25.6 dB(A), and mounts to modern AMD and Intel sockets. It suits you if your case accommodates standard tower heights and you want more heatsink volume than compact 92mm low-profile coolers offer.
Pros
- Six 6mm pure copper sintered heat pipes with AGHP technology
- Dual 120mm PWM fans delivering up to 66.17 CFM of airflow
- Double-tower aluminum heatsink with a pure copper base
- Low maximum operational noise level rated at 25.6 dB(A)
Cons
- Tall 157mm height does not fit small-form-factor or slim cases
- No integrated RGB or ARGB lighting included on fans or heatsink
Good fit if
- You have a PC chassis with at least 157mm of CPU cooler height clearance.
- You want dual 120mm fans and two fin stacks rather than a compact low-profile cooler.
Skip if
- You build in an ultra-compact mini-ITX enclosure restricted to low-profile coolers.
- You require built-in lighting on the cooling fans or heatsink top.
Verdict: Thermalright Peerless Assassin 120 Dual-Tower Cooler provides substantial cooling capacity using two fin stacks and dual 120mm fans. It serves as a heavy-duty alternative whenever your PC enclosure allows for a 157mm tower height.
Iceberg Thermal IceSLEET G4 120mm Cooler
Best for: standard towers needing quiet 180W cooling
- Socket Compatibility
- LGA1700, 1200, 115X, 1366, AM5, AM4
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 180W
- Fan Speed
- 1400 RPM
- Lighting
- ARGB
The Iceberg Thermal IceSLEET G4 is a standard-height tower cooler featuring four direct-touch heat pipes and a 120mm ARGB PWM fan. While low-profile alternatives fit shallow cases, this model stands 6.14 inches tall, requiring a standard chassis. It delivers a 180W TDP rating and airflow up to 58.5 CFM with noise levels capped at 22.5 dBA. This cooler suits you if your build has vertical clearance and needs higher thermal capacity.
Pros
- 180W TDP rating handles high-load processors
- Slide-lock fan mount eliminates the need for wire clips
- Quiet operation rated at 22.5 dBA maximum
- Broad socket support including LGA 1700 and AM5
Cons
- Height of 6.14 inches will not fit compact small-form-factor cases
- Maximum fan speed is limited to 1400 RPM
Good fit if
- You have at least 6.14 inches of vertical clearance inside your computer case.
- You want clip-free fan installation using slide-lock mounting.
- You need up to 180W TDP thermal headroom with integrated ARGB lighting.
Skip if
- You are building in a slim mini-ITX enclosure that requires a low-profile heatsink.
- You require a high-speed fan that exceeds 1400 RPM.
Verdict: Iceberg Thermal IceSLEET G4 120mm Cooler provides 180W TDP cooling and quiet 22.5 dBA operation with clip-free slide-lock fan mounting. It works well if your chassis has the 6.14 inches of clearance needed for a standard tower heatsink.
Thermalright 47mm Full Copper CPU Cooler
Best for: compact ITX builds with strict height limits
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1200, 1851
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
The Thermalright 47mm Low-Profile Copper Cooler is an ultra-compact air cooler built for small-form-factor systems. You get a total height of 47mm paired with a 92mm slim PWM fan and four 6mm heatpipes. The all-metal platform mounts to AMD AM4 and AM5 sockets as well as Intel LGA 1700 and 1851 boards. Running at 22.4 dBA or less, it suits you when you build inside tight ITX enclosures.
Pros
- Total cooler height of 47mm fits compact clearance
- Four 6mm heatpipes paired with reflow soldering
- Rated noise level stays at or below 22.4 dBA
- Includes slim 92mm PWM fan
Cons
- Limited to four heatpipes unlike larger tower coolers
- Heavier than standard aluminum units at 1.54 pounds
Good fit if
- You build inside an ITX case requiring under 50mm cooler clearance.
- You want a compact 92mm fan with low noise capped at 22.4 dBA.
- You use modern sockets including AMD AM5 or Intel LGA 1700 and 1851.
Skip if
- You have clearance for a standard 120mm dual-tower cooler.
- You want more than four heatpipes for cooling.
Verdict: Thermalright 47mm Low-Profile Copper Cooler packs four heatpipes and quiet 22.4 dBA cooling into a 47mm height. It gives you a capable cooling solution when your case space is extremely limited.
Thermalright Peerless Assassin Dual Tower Air Cooler
Best for: standard cases needing dual-tower air cooling
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin Dual Tower Air Cooler
If your computer chassis can accommodate a standard tower cooler instead of a low-profile design, this dual-tower heatsink offers expanded cooling capacity. The unit measures 155 mm tall and includes two 120 mm PWM fans that reach up to 1,550 RPM. With six 6 mm copper heat pipes and an aluminum fin array, you get 66.17 CFM of peak airflow for your AM4, AM5, or LGA 1700 processor.
Pros
- Six 6 mm sintered copper heat pipes
- Dual 120 mm PWM fans delivering up to 66.17 CFM airflow
- Maximum rated fan noise level of 25.6 dB(A)
- Wide socket support including LGA 1700, LGA 1851, AM4, and AM5
Cons
- 155 mm height does not fit slim or small-form-factor cases
- AMD installation requires the motherboard original backplate (not included)
Good fit if
- You have a PC case with at least 155 mm of vertical cooler clearance.
- You want dual 120 mm fans and a dual-tower heatsink rather than a low-profile cooler.
- You are building an Intel LGA 1700/1851 or AMD AM4/AM5 system.
Skip if
- You need a low-profile cooler for a compact small-form-factor build.
- You do not have the original AMD backplate for your AM4 or AM5 motherboard.
Verdict: Thermalright Peerless Assassin 120mm Dual-Tower delivers dual-fan tower cooling with six copper heat pipes for full-sized cases that do not require a low-profile heatsink.
Thermalright Assassin X 120 White ARGB
Best for: mid-sized cases needing balanced 4-pipe cooling
- Socket Compatibility
- AM4, AM5, LGA 115X, 1200, 1700, 1851
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- TDP Rating
- 125-225 W
- Fan Speed
- 1550 RPM
The Thermalright Assassin X 120 SE White CPU Cooler is a single-tower heatsink equipped with four 6mm heat pipes and a 120mm ARGB fan. Standing 148mm tall, it delivers airflow up to 66.17 CFM with a noise ceiling of 25.6 dB(A) and handles thermal loads between 125W and 225W. It suits you if your chassis permits a mid-sized tower and you want more cooling headroom than compact 92mm low-profile alternatives provide.
Pros
- Four 6mm heat pipes with AGHP technology rated for 125W to 225W TDP
- 120mm PWM fan moves up to 66.17 CFM of airflow
- Maximum specified operating noise level is capped at 25.6 dB(A)
- Wide socket support including Intel LGA 1700, LGA 1851, AM4, and AM5
Cons
- 148mm tower height prevents installation in compact low-profile cases
- Single-tower heatsink provides less dissipation area than dual-tower alternatives
Good fit if
- You have at least 148mm of CPU cooler clearance in your enclosure.
- You want an ARGB white cooler rated for processors up to 225W TDP.
- You build on modern platforms such as Intel LGA 1700/1851 or AMD AM4/AM5.
Skip if
- You need a low-profile cooler that fits into slim or small-form-factor builds.
- You want an all-black design or build without integrated ARGB lighting.
Verdict: Thermalright Assassin X 120 SE White CPU Cooler provides solid 4-heatpipe cooling performance and 66.17 CFM airflow for mid-sized enclosures that can handle its 148mm height. It offers you higher thermal capacity than 92mm low-profile designs whenever vertical clearance is not restricted.
Specifications side by side
| Spec | SCYTHE Shuriken 3 92mm Low-Profile Cooler | Cooler Master Hyper 212 Halo CPU Cooler | Thermalright Peerless Assassin 120 Dual Fan Cooler | Iceberg Thermal IceSLEET G4 120mm Cooler | Thermalright 47mm Full Copper CPU Cooler | Thermalright Peerless Assassin Dual Tower Air Cooler | Thermalright Assassin X 120 White ARGB |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | AM5, LGA1700 | not specified | AM4/AM5, LGA1700/1200/2011/1851 | LGA1700, 1200, 115X, 1366, AM5, AM4 | AM4, AM5, LGA1700, 115X, 1200, 1851 | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA 115X, 1200, 1700, 1851 |
| Cooler Height | not specified | 154mm | 157mm | not specified | 47mm | 155 mm | 148 mm |
| Heat Pipes | not specified | 4 | 6 | 4 | 4 | 6 | 4 |
| Tower Design | Low-Profile | not specified | Double tower | not specified | Low-Profile | Dual-Tower | not specified |
| Fan Size | 92mm | 120mm | 120mm | 120mm | 92mm | 120 mm | 120 mm |
| TDP Rating | not specified | not specified | not specified | 180W | not specified | not specified | 125-225 W |
| Fan Speed | not specified | 2050 RPM | 1550rpm±10% | 1400 RPM | not specified | 1550 RPM | 1550 RPM |
| Lighting | not specified | ARGB | not specified | ARGB | not specified | not specified | ARGB |
| System Type | not specified | not specified | not specified | not specified | ITX | not specified | not specified |
| Color | not specified | Black | PA120 | Black | AXP-90 X47 FULL Cooper | PA120 SE | White |
| Material | not specified | Aluminum | not specified | not specified | not specified | not specified | not specified |
| Features | not specified | Fan | not specified | Fan | Fan | not specified | Fan |
| Dimensions | 3.7 × 3.6 × 1.5 inches | 6.06 × 4.88 × 2.87 inches | 6.18 × 5.31 × 4.92 inches | 3.19 × 5.47 × 6.14 inches | 3.72 × 3.74 × 1.85 inches | 6.1 × 5.31 × 4.92 inches | 5.83 × 4.92 × 2.8 inches |
| Weight | 1.06 pounds | 1.53 pounds | 1 pounds | not specified | 1.54 pounds | 2 pounds | 1 pounds |
| Model | SCSK-3000 | RR-S4KK-20PA-R1 | LM-PA 120 | ICESLEETG4MD-BBB-00A | AXP-90 X47 FULL Cooper | PA120 SE | AX120 SE ARGB WHITE-D2 |
| Size | not specified | V2 | PA120 series | not specified | Height 47mm | PA120 SE series | 4 Heat pies |
You can also examine okinos aqua 3 alternatives if your case accommodates different cooler height specifications.
Frequently asked questions
Which alternative is best for an ITX case with strict clearance limits?
The Thermalright 47mm Full Copper CPU Cooler is your best choice for low-clearance ITX builds. It measures 1.85 inches (47mm) tall, making it a close low-profile match to the SCYTHE unit. It features four heat pipes, an all-copper build, and runs at 22.4 dBA. It also supports older and newer sockets including AM4, AM5, LGA 1700, and LGA 1851.
Do these alternatives support older Intel sockets like LGA 1200 and LGA 1151?
Yes, several Thermalright options support older Intel platforms. While the SCYTHE Shuriken 3 lists AM5 and LGA 1700 support, models like the Thermalright Peerless Assassin 120, Assassin X 120 White ARGB, and the 47mm Full Copper model fit LGA 1200, LGA 1150, and LGA 1151. They also maintain forward compatibility with LGA 1851 and AM4 motherboards for flexible upgrading.
Which alternative provides the highest airflow rating?
The Thermalright Assassin X 120 White ARGB provides the highest specified airflow on this list. Its 120mm fan delivers 66.17 CFM across four heat pipes. Standing at 148mm tall, it requires a mid-sized chassis rather than an ultra-compact enclosure. You also get integrated ARGB lighting and a clean white finish, trading the low-profile form factor of the Shuriken 3 for higher single-tower ventilation.
What is the quietest alternative to the SCYTHE Shuriken 3?
The Thermalright 47mm Full Copper CPU Cooler features the lowest listed acoustic rating at 22.4 dBA. If you prefer a full-tower design, the Iceberg Thermal IceSLEET G4 is nearly as quiet with a 22.5 dBA specification. The IceSLEET G4 provides 180W TDP cooling capacity and uses a slide-lock fan mounting mechanism, though its 6.14-inch height demands significantly more vertical room inside your PC case.
How much vertical case clearance do you need for a dual-tower alternative?
You need at least 157mm or 6.18 inches of clearance for dual-tower coolers like the Thermalright Peerless Assassin 120. The Peerless Assassin SE version also measures 6.1 inches tall and weighs two pounds. These twin-tower options feature six heat pipes and two 120mm fans. They require standard desktop cases and will not fit the compact cases built for 1.5-inch low-profile coolers like the Shuriken 3.
Which alternatives include integrated ARGB lighting?
Three models on this list offer integrated ARGB lighting if you want illumination. The Cooler Master Hyper 212 Halo, Iceberg Thermal IceSLEET G4, and Thermalright Assassin X 120 White ARGB each incorporate ARGB elements. Unlike the non-illuminated SCYTHE Shuriken 3, these coolers are standard-sized towers with 120mm fans that fit cases with at least 148mm of vertical clearance above your processor socket.