MITXPC Dynatron LGA4189 Copper Heatpipe Alternatives: 6 Similar Picks Compared

Alternatives Compared to Dynatron N2

Dynatron 1U Copper Blower Heatsink

The Dynatron R13 targets 1U LGA 2011 systems rather than your FCLGA4189 build. It uses a copper-only construction for heat dissipation, unlike the aluminum base and copper heatpipe mix in the N2. Its dimensions are 3.15 by 4.06 inches with a 1.1-inch height, fitting tight chassis spaces. This blower-style heatsink supports up to 95W TDP, which is significantly lower than the 270W capacity of the original. You should choose this if you are building a compact server with LGA 2011 processors and need directed airflow. It does not fit your socket, so verify compatibility before purchasing.

Dynatron 2U Active Aluminum SP3 Heatsink

The Dynatron A26 is designed for AMD EPYC SP3 sockets, not Intel FCLGA4189. It features an active cooling method with aluminum fins, differing from the passive copper heatpipe design of the N2. Measuring 4.5 by 5 inches with a 6-inch height, it requires more vertical clearance than the original. This cooler is built for 2U server chassis, providing necessary active cooling for EPYC processors. It lacks the compact form factor of the N2 and does not support your specific Intel socket. Pick this only if you are cooling AMD SP3 CPUs in a 2U environment. It offers active airflow where the original relies on case fans for passive cooling.

Dynatron 1U Copper Vapor Chamber Server Heatsink

The Dynatron B4A utilizes a copper vapor chamber for heat transfer, offering different thermal dynamics than the N2's copper heatpipes. It is sized at 3.1 by 4.2 inches with a 1-inch height, fitting 1U Intel Xeon servers. This design prioritizes high thermal performance in a compact footprint, similar to the N2's intent but for a different socket and generation. It does not support FCLGA4189, so it is incompatible with your Ice Lake or Cooper Lake CPUs. Choose this if you need advanced vapor chamber technology for 1U Xeon builds. It provides a specialized cooling solution for high-density server environments where space is limited.

Easycargo 20-Piece Copper and Aluminum Heatsink Kit

The Easycargo kit is intended for Raspberry Pi boards, not server CPUs. It includes 20 pieces of copper and aluminum heatsinks with thermal tape for adhesive mounting. Each piece is tiny, measuring 0.55 by 0.28 inches, far smaller than the N2. This kit cools small components like RAM and VRAM on single-board computers. It lacks the structural mounting hardware and thermal capacity for high-TDP server processors. You should only consider this for low-power embedded projects. It offers a simple, low-profile solution for consumer electronics rather than enterprise computing. The material mix is similar, but the application and scale are entirely different from the original.

SilverStone 1U Passive Copper Server Heatsink

The SilverStone SST-XE01-2011 is a passive copper heatsink for LGA 2011 or LGA 2066 sockets. It measures 3.54 by 3.54 inches with a 1.02-inch height, fitting 1U server chassis. Like the N2, it relies on passive cooling, but it does not support your FCLGA4189 socket. It is constructed entirely of copper, differing from the aluminum base of the original. This cooler is for older Intel Xeon platforms in compact server builds. You must verify socket compatibility before considering this option. It provides reliable passive cooling for compatible systems but cannot be used for your specific Intel processor. It is a specialized component for legacy server infrastructure.

Intel K69237 Copper Core LGA115X/1200 Cooler

The Intel K69237-001 is an aluminum and copper cooler for LGA 1200 sockets. It measures 3.9 by 3.9 inches with a 2.64-inch height, suitable for standard desktop builds. This cooler supports up to 65W TDP, which is much lower than the 270W capacity of the N2. It is designed for consumer-grade Intel CPUs, not enterprise server processors. The mounting mechanism and socket compatibility differ significantly from the original. You should only look at this if you are building a standard desktop with an LGA 1200 processor. It lacks the server-grade thermal performance and socket support required for your specific needs. It is a basic solution for low-power desktop applications.

Quick picks

Our 7 picks

1 Best overall

Dynatron LGA4189 Copper Heatpipe Heatsink

Best for: Intel FCLGA4189 server CPUs

Socket Compatibility

FCLGA4189

Material

Aluminum Base, Copper Heatpipes

Mounting Type

Captive Mounting Sets

View on Amazon: Dynatron LGA4189 Copper Heatpipe Heatsink Affiliate link

The MITXPC Dynatron N2 is an aluminum heatsink with copper heatpipes designed for Intel FCLGA4189 sockets, including Ice Lake and Cooper Lake processors. It supports up to 270W TDP when paired with 23CFM airflow. The unit features a stacked fin design and comes with pre-printed Shin-Etsu 7762 thermal grease. It uses standard Intel captive mounting sets for installation. This cooler suits users needing reliable passive cooling for high-power server CPUs.

Pros

• Supports up to 270W TDP with 23CFM airflow
• Uses copper heatpipes for efficient heat transfer
• Includes pre-printed Shin-Etsu 7762 thermal grease
• Compatible with FCLGA4189 sockets

Cons

• Requires specific 23CFM airflow to reach max TDP
• Passive design limits cooling in low-airflow cases
• Limited to Intel FCLGA4189 socket compatibility

Good fit if

• You use an Intel Ice Lake or Cooper Lake processor
• You have a case with adequate airflow
• You need a high-TDP server CPU cooler

Skip if

• You use a socket other than FCLGA4189
• You need active fan cooling
• You require compatibility with AMD platforms

Verdict: The MITXPC Dynatron N2 LGA4189 Cooler is a specialized passive solution for Intel FCLGA4189 processors. It fits users who prioritize high TDP support in a compact, fanless design for server environments.

2 Best premium

Dynatron 1U Copper Blower Heatsink

Best for: 1U LGA 2011 server builds

Socket Compatibility

Intel Socket 2011 (Narrow ILM)

Material

Copper1100

Server Height

1U

Mounting Type

Captive Mounting

Dimensions

4.06 × 3.15 × 1.1 inches

Weight

1.04 pounds

View on Amazon: Dynatron 1U Copper Blower Heatsink Affiliate link

This is a 1U copper heatsink designed for Intel Socket 2011 (Narrow ILM). It features a Copper 1100 block with skived fins and a PWM blower fan. The unit supports CPUs up to 95 Watts and comes with Shin-Etsu G751 thermal grease pre-printed. It uses a captive mounting system for secure installation. This cooler is built for compact server environments where height is restricted.

Pros

• Copper 1100 material with skived fins
• Supports up to 95 Watts CPU power
• Includes PWM blower fan
• Pre-printed Shin-Etsu G751 thermal grease
• Captive mounting for secure fit

Cons

• Limited to Intel Socket 2011 (Narrow ILM)
• Max support is only 95 Watts
• Blower design may increase noise

Good fit if

• You need a 1U cooler for LGA 2011
• You have a chassis with blower fan slots
• You require a captive mounting solution

Skip if

• You use an AM4 or AM5 socket
• You need support for high TDP CPUs
• You prefer a standard tower design

Verdict: Dynatron R13 1U Copper Heatsink is a specialized cooler for LGA 2011 systems in 1U chassis. It fits users who need a low-profile blower solution for 95W processors.

3 Also great

Dynatron 2U Active Aluminum SP3 Heatsink

Best for: AMD EPYC SP3 2U server cooling

Socket Compatibility

Socket SP3

Material

Aluminum

Server Height

2U

Cooling Method

Active

Compatible Device

AMD EPYC

Dimensions

5 × 4.5 × 6 inches

View on Amazon: Dynatron 2U Active Aluminum SP3 Heatsink Affiliate link

The Dynatron A26 is an active cooling solution designed for AMD EPYC processors using the SP3 socket. It features an aluminum construction with embedded heatpipes to manage thermal loads in 2U server chassis. Measuring 4.5 by 5 by 6 inches and weighing 1 pound, it fits standard rack spaces. This heatsink suits users needing reliable airflow cooling for enterprise-grade CPUs without the bulk of larger alternatives.

Pros

• Active cooling method with embedded heatpipes
• Compatible with AMD EPYC SP3 socket
• Fits 2U server height specifications
• Lightweight aluminum build at 1 pound

Cons

• Limited to AMD EPYC SP3 socket only
• Aluminum material may offer less thermal mass than copper
• Does not support Intel LGA4189 sockets

Good fit if

• You use AMD EPYC processors in a 2U chassis
• You need active airflow cooling for server workloads
• You require a lightweight heatsink for rack mounting

Skip if

• You use Intel LGA4189 processors
• You prefer passive cooling without fans
• You need compatibility with multiple CPU sockets

Verdict: Dynatron A26 2U Active Aluminum Heatsink is a solid choice for AMD EPYC SP3 systems. It provides necessary active cooling for 2U servers. Buyers needing Intel LGA4189 support should look elsewhere.

4 Best vapor chamber

Dynatron 1U Copper Vapor Chamber Server Heatsink

Best for: 1U Intel Xeon server cooling

Socket Compatibility

FCLGA 3647 Narrow ILM

Material

Copper with vapor chamber base

Server Height

1U

Dimensions

108.0 x 81.0 x 27.0 mm

System Type

Server

Weight

1.06 pounds

View on Amazon: Dynatron 1U Copper Vapor Chamber Server Heatsink Affiliate link

This Dynatron B4A heatsink is a 1U server cooling solution designed for Intel FCLGA 3647 Narrow ILM sockets. It features a copper vapor chamber base and stacked copper fins for efficient heat transfer. The unit measures 108.0 x 81.0 x 27.0 mm and weighs 1.06 pounds. It suits users needing passive or active cooling in 1U server chassis for high-performance Xeon processors.

Pros

• Copper vapor chamber base for superior heat spreading
• Stacked copper fin array for high thermal conductivity
• Compact 1U height fits in small server chassis
• Compatible with Intel FCLGA 3647 Narrow ILM sockets

Cons

• Limited to FCLGA 3647 socket compatibility
• Heavy weight of 1.06 pounds may stress mounting points
• Requires 1U chassis space which restricts case options

Good fit if

• You are building a 1U server with Intel Xeon processors
• You need a passive cooling solution for high TDP CPUs
• You require a vapor chamber base for efficient heat dissipation

Skip if

• You are using a socket other than FCLGA 3647
• You need a cooler taller than 1U for your chassis
• You prefer aluminum heatsinks for lower weight

Verdict: Dynatron B4A 1U Copper Vapor Chamber Heatsink is a specialized cooling solution for 1U Intel Xeon servers. It fits users who need high thermal performance in a compact form factor.

5 Best budget

Easycargo 20-Piece Copper and Aluminum Heatsink Kit

Best for: Cooling small chips on Raspberry Pi boards

Material

Aluminum + Copper

Compatible Device

Raspberry Pi 5 4 3 boards

Mounting Type

Pre-applied adhesive tape backing

Features

Thermal Tape

Dimensions

0.55 × 0.55 × 0.28 inches

Weight

0.64 ounces

View on Amazon: Easycargo 20-Piece Copper and Aluminum Heatsink Kit Affiliate link

This kit offers 20 mixed aluminum and copper heatsinks for Raspberry Pi 5, 4, and 3 boards. Each unit features pre-applied thermal adhesive tape for direct mounting. The set includes various sizes to cover VRAM, VGA, RAM, and other chips. It is a practical solution for cooling multiple components on single-board computers without complex hardware installation.

Pros

• Includes 15 aluminum and 5 copper heatsinks
• Pre-applied thermal conductive adhesive tape
• Compatible with Raspberry Pi 5, 4, and 3
• Suitable for cooling VRAM, VGA, RAM, and IC chips

Cons

• Only suitable for small surface areas
• Adhesive backing limits repositioning
• Not designed for high-TDP CPU sockets

Good fit if

• You need to cool multiple small chips on a Raspberry Pi
• You want a simple adhesive mounting method
• You are building a compact SBC project

Skip if

• You are cooling a standard desktop CPU
• You require adjustable fan speed control
• You need a large heatsink for high heat output

Verdict: Easycargo 20pc Pi Heatsink Kit is a targeted solution for Raspberry Pi owners who need to cool multiple small components like RAM and VRAM. It fits users who prefer adhesive mounting over screws for simple, low-profile thermal management.

6 Best passive

SilverStone 1U Passive Copper Server Heatsink

Best for: 1U servers with LGA2011 or LGA2066

Socket Compatibility

LGA2011/2066

Material

Copper skived-fin and copper base

Server Height

1U

Cooling Method

Passive

System Type

Server

Dimensions

3.54 × 3.54 × 1.02 inches

View on Amazon: SilverStone 1U Passive Copper Server Heatsink Affiliate link

This SilverStone unit is a passive cooling solution standing 26mm tall. It uses a copper skived-fin design with a copper base for heat transfer. The cooler supports Intel LGA2011 and LGA2066 sockets. It weighs 1.08 pounds and measures 3.54 inches square. This build targets 1U rackmount servers where airflow comes from external fans rather than integrated blowers.

Pros

• Copper skived-fin and copper base construction
• Compact 26mm height fits 1U chassis
• Supports Intel LGA2011 and LGA2066 sockets
• Passive design requires no internal fan noise

Cons

• Only compatible with LGA2011 and LGA2066 sockets
• Requires external server chassis airflow to function
• Heavier at 1.08 pounds compared to aluminum alternatives

Good fit if

• You are building a 1U rackmount server
• You use Intel LGA2011 or LGA2066 processors
• You need a passive cooler to reduce noise

Skip if

• You use Intel LGA4189 processors
• You need a cooler with an integrated fan
• You are building a standard desktop PC

Verdict: SilverStone 1U Passive Copper Cooler is a specialized component for 1U servers using LGA2011 or LGA2066. It does not fit your LGA4189 build. You should look for a cooler that explicitly supports your socket type.

7 Best lga 1200

Intel K69237 Copper Core LGA115X/1200 Cooler

Best for: Standard 65W Intel LGA1200 builds

Socket Compatibility

LGA115X, Socket 1200

Material

Copper core, aluminum

Dimensions

3.9 x 3.9 x 2.64 inches

View on Amazon: Intel K69237 Copper Core LGA115X/1200 Cooler Affiliate link

This Intel K69237-001 cooler uses a copper core and aluminum fins for LGA1200 and LGA115X sockets. It provides 65W of cooling capacity, depending on your case airflow and ambient temperature. The unit measures 3.9 by 3.9 by 2.64 inches. It is a straightforward air cooler designed for standard desktop builds using Intel 10th generation processors or compatible sockets.

Pros

• Copper core with aluminum fins for efficient heat transfer
• Compatible with LGA1200 and LGA115X sockets
• 65W thermal design power capacity
• Compact 2.64-inch height fits most mid-tower cases

Cons

• Limited to 65W cooling capacity
• Not compatible with AMD or X299 sockets
• Passive design requires adequate case airflow

Good fit if

• You use an Intel LGA1200 processor
• You need a 65W TDP cooler
• You prefer a low-profile aluminum design

Skip if

• You use an AMD CPU
• You have an X299 motherboard
• You need more than 65W cooling

Verdict: Intel K69237-001 LGA1200 Aluminum Cooler is a basic air cooler for users with 65W Intel CPUs on LGA1200 boards. It fits well in cases with good airflow but lacks power for high-end chips.

Specifications side by side

Frequently asked questions