Hilitand 70mm Extruded Aluminum CPU Cooler Alternatives: 6 Similar Picks Compared

Alternatives Compared to Hilitand

StarTech.com 50mm Socket 7/370 Aluminum Cooler

The StarTech.com 50mm Socket 7/370 Aluminum Cooler targets vintage hardware, unlike the Hilitand which supports modern AMD sockets. This StarTech unit measures 1.97 by 1.97 inches, making it significantly smaller than the Hilitand’s 4.21-inch length. It weighs 8 ounces, which is much heavier than the Hilitand’s 0.35 ounces. You should choose this option only if you are building a retro system with Socket 7 or Socket 370 processors. It does not fit AM2 or AM3 sockets. The black aluminum construction provides basic cooling for older CPUs where space is extremely tight. It is a specialized tool for legacy builds rather than a general-purpose upgrade for current systems.

Thermaltake Gravity i2 92mm CPU Cooler

The Thermaltake Gravity i2 92mm CPU Cooler supports Intel LGA 1200, 1150, and 1151 sockets, whereas the Hilitand is limited to AMD AM2 through FM2+. This Thermaltake unit is larger, measuring 3.7 by 3.7 inches with a height of 3.7 inches. It weighs 11 ounces, compared to the Hilitand’s light 0.35 ounces. The 92mm fan size suggests better airflow potential than the Hilitand’s 70mm fan. You should pick this cooler if you use an Intel processor and need a compact solution. It is not compatible with AMD sockets. The black aluminum design fits standard desktop cases. It offers a different socket compatibility profile and a larger physical footprint than the small Hilitand option.

TRONSTORE TS1 92mm CPU Cooler

The TRONSTORE TS1 92mm CPU Cooler also targets Intel LGA 1200 and 115x sockets, differing from the Hilitand’s AMD focus. This cooler features copper and aluminum materials, while the Hilitand uses only aluminum. The TRONSTORE unit measures 3.62 by 3.62 inches with a height of 2.2 inches. It weighs 5.6 ounces, which is heavier than the Hilitand. The 92mm fan provides a larger air volume than the Hilitand’s 70mm fan. You should choose this for Intel desktop builds in space-limited cases. It does not fit AMD sockets. The combination of copper and aluminum may offer different thermal properties. It is a straightforward choice for users who need Intel compatibility and a slightly larger cooler than the compact Hilitand.

AMD Wraith Stealth Slim AM4 CPU Cooler

The AMD Wraith Stealth Slim AM4 CPU Cooler is designed specifically for AM4 sockets, unlike the Hilitand which supports older AM2 to FM2+ sockets. This AMD unit measures 4.72 by 4.72 inches with a height of 1.97 inches. It is larger in surface area but thinner than the Hilitand. The cooler uses a 90mm fan, which is larger than the Hilitand’s 70mm fan. You should pick this if you have an AM4 processor and need a direct-mount solution. It is not compatible with AM2, AM3, or FM1 sockets. The black aluminum construction is standard for stock coolers. It offers modern AM4 support and a different form factor compared to the legacy-focused Hilitand cooler.

Cooler Master Hyper 212 Halo CPU Cooler

The Cooler Master Hyper 212 Halo supports AM5 and LGA 1700 sockets, which are newer than the Hilitand’s AM2 to FM2+ range. This Cooler Master unit is much larger, measuring 6.06 by 4.88 inches with a height of 2.87 inches. It weighs 1.53 pounds, significantly heavier than the Hilitand’s 0.35 ounces. It features ARGB lighting and a 120mm fan, offering more features than the basic Hilitand. You should choose this for modern AM5 or LGA 1700 builds with sufficient case clearance. It requires 154mm height clearance. The aluminum construction supports larger processors. It is a premium option for current systems, whereas the Hilitand is for older hardware.

AMD Wraith Spire Aluminum AM4 Cooler

The AMD Wraith Spire Aluminum AM4 Cooler is a stock solution for AM4 processors, differing from the Hilitand’s support for older AMD sockets. This AMD unit measures 3.81 by 3.81 inches with a height of 3.81 inches. It is a cube-shaped design, unlike the elongated Hilitand. The cooler uses aluminum construction and a standard fan. You should pick this for basic AM4 desktop cooling needs. It does not fit AM2, AM3, or FM1 sockets. It is a simple, plug-and-play option for standard cases. The Wraith Spire offers modern AM4 compatibility and a different physical profile compared to the compact, legacy-focused Hilitand cooler.

Quick picks

Our 7 picks

1 Best overall

Hilitand 70mm Extruded Aluminum CPU Cooler

Best for: legacy AMD socket small form factor builds

Socket Compatibility

AM2, AM3, AM3+, FM1, FM2, FM2+

Fan Speed

2200RPM

Material

Aluminum

Features

Fan

Dimensions

4.21 × 2.76 × 1.57 inches

Weight

0.35 ounces

View on Amazon: Hilitand 70mm Extruded Aluminum CPU Cooler

This Hilitand cooler uses a 70mm fan and extruded aluminum heatsink to dissipate heat from older AMD processors. It runs at 2200 RPM with a low 2.8W power draw. The unit fits AM2, AM3, AM3+, FM1, FM2, and FM2+ sockets. Its compact 70mm size makes it suitable for small form factor builds or cases with limited airflow. You get a straightforward, passive cooling solution that relies on direct air movement.

Pros

• 70mm fan size fits tight spaces
• Extruded aluminum heatsink for efficient heat transfer
• 2200 RPM fan speed for steady airflow
• Compatible with AM2 through FM2+ sockets

Cons

• Smaller 70mm fan moves less air than standard 92mm or 120mm coolers
• No PWM support listed, limiting speed control
• Limited socket compatibility excludes modern AM5 and Intel platforms

Good fit if

• You need a cooler for legacy AM2 or FM2+ systems
• You have a small case with limited height clearance
• You want a low-power passive cooling option

Skip if

• You use a modern AM5 or Intel CPU
• You need high airflow for overclocking
• You prefer PWM fan speed control

Verdict: Hilitand 70mm Aluminum CPU Cooler is a compact, low-power option for older AMD sockets. It suits users with small cases or legacy hardware who do not require high-end thermal performance.

2 Also great

StarTech.com 50mm Socket 7/370 Aluminum Cooler

Best for: Socket 7 and Socket 370 retro builds

Socket Compatibility

Socket 370, Socket 7

Fan Size

50 mm

Color

Black

Material

Aluminum

Features

Fan

Dimensions

1.97 × 1.61 × 1.97 inches

View on Amazon: StarTech.com 50mm Socket 7/370 Aluminum Cooler

This StarTech.com cooler pairs a 50 mm fan with an extruded aluminum heatsink. It supports legacy Socket 7 and Socket 370 processors. The unit measures 50x50x41 mm and weighs 8 ounces. It offers a compact, black aluminum build for older systems. You need this specific socket compatibility for vintage hardware upgrades.

Pros

• Supports Socket 7 and Socket 370 processors
• Compact 50 mm fan size
• Lightweight 8 ounce aluminum construction
• Extruded aluminum heatsink material

Cons

• Only fits legacy Socket 7 and 370
• Small 50 mm fan limits airflow
• No PWM support listed in specs

Good fit if

• You are upgrading a Socket 7 system
• You need a Socket 370 replacement
• You require a 50 mm form factor

Skip if

• You use modern AM4 or LGA sockets
• You need high airflow for hot CPUs
• You require PWM fan control

Verdict: StarTech 50mm Socket 7/370 Aluminum CPU Fan fits only Socket 7 and Socket 370 builds. It provides basic cooling for vintage processors where space is tight.

3 Best premium

Thermaltake Gravity i2 92mm CPU Cooler

Best for: Intel LGA 1200 builds needing compact quiet cooling

Socket Compatibility

LGA 1200/1156/1155/1150/1151

Tower Design

Low-profile

Fan Size

92mm

Material

Aluminum

Features

Fan

Dimensions

3.7 × 2.4 × 3.7 inches

View on Amazon: Thermaltake Gravity i2 92mm CPU Cooler

The Thermaltake Gravity i2 uses a low-profile aluminum extrusion heatsink paired with a 92mm, 7-bladed PWM fan. It supports Intel sockets including LGA 1200, 1156, 1155, 1150, and 1151. The compact design measures 3.7 inches in height and 3.7 inches in width. This cooler is suitable for users needing a small footprint that still delivers quiet operation through its four-pin PWM connectivity.

Pros

• Aluminum extrusion heatsink design
• 92mm 7-bladed fan for low noise
• 4-pin PWM connector support
• Low-profile 3.7-inch height
• Compatible with LGA 1200 and 115x sockets

Cons

• Limited to Intel socket compatibility
• 92mm fan size offers less airflow than 120mm options
• Single tower design restricts high-TDP cooling

Good fit if

• You need a low-profile cooler for a small case
• You use an Intel CPU with LGA 1200 or 115x sockets
• You prioritize quiet operation over maximum cooling performance

Skip if

• You require AMD socket support
• You need a dual-tower design for high heat output
• You prefer 120mm or larger fans for higher airflow

Verdict: Thermaltake Gravity i2 92mm Aluminum CPU Cooler fits users with Intel LGA 1200 or 115x processors who need a compact, quiet cooling solution for standard use cases.

4 Best budget

TRONSTORE TS1 92mm CPU Cooler

Best for: Intel socket 115x and 1200 desktop builds

Socket Compatibility

LGA 1200, 1151, 1150, 1155, 1156

Cooler Height

2.2 inches

Fan Size

92mm

System Type

Desktop

Material

Copper, Aluminum

Features

Fan

View on Amazon: TRONSTORE TS1 92mm CPU Cooler

This TRONSTORE TS1 cooler uses a 92mm fan and an aluminum heatsink with a copper core base. It supports Intel sockets 1200, 1151, 1150, 1155, and 1156. The unit includes pre-applied thermal paste and a 4-pin PWM connector for fan speed control. It weighs 5.6 ounces and measures 3.62 by 3.62 by 2.2 inches. You will find this practical for standard desktop builds needing reliable heat dissipation.

Pros

• Copper core base for efficient heat transfer
• Supports multiple Intel LGA sockets
• Includes pre-applied thermal paste
• 4-pin PWM fan control

Cons

• Only supports Intel sockets, not AMD
• 92mm fan may be louder than larger options
• No mention of AMD socket compatibility

Good fit if

• You use an Intel processor on socket 115x or 1200
• You need a simple plug-and-play installation
• You prefer a compact aluminum heatsink design

Skip if

• You have an AMD AM4 or AM5 processor
• You require support for modern Intel LGA 1700 sockets
• You need a cooler with a larger 120mm or 140mm fan

Verdict: TRONSTORE TS1 92mm Aluminum CPU Cooler is a solid choice for Intel users on older sockets who need a straightforward cooling solution. It fits well in cases where space is limited and AMD compatibility is not required.

5 Also great

AMD Wraith Stealth Slim AM4 CPU Cooler

Best for: AM4 small form factor builds

Socket Compatibility

AM4

Fan Size

90mm

Material

Aluminum

Features

Fan

Dimensions

1.97 × 4.72 × 4.72 inches

View on Amazon: AMD Wraith Stealth Slim AM4 CPU Cooler

The AMD Wraith Stealth is a slim, black aluminum heatsink designed for AM4 sockets. It includes a 90mm fan with a 4-pin PWM connector and comes with pre-applied thermal paste. Its compact 1.97-inch height makes it suitable for small form factor builds. You get direct screw mounting for a secure fit. This cooler offers a straightforward, no-frills cooling solution for standard desktop use.

Pros

• Aluminum heatsink with pre-applied thermal paste
• 90mm fan with 4-pin PWM connector
• Direct screw mounting for AM4 sockets
• Slim 1.97-inch height for compact cases

Cons

• 90mm fan is smaller than standard 120mm options
• Aluminum material offers less thermal mass than copper
• Limited to AM4 socket compatibility

Good fit if

• You need a low-profile cooler for a small case
• You are building or upgrading an AM4 system
• You want a simple plug-and-play installation

Skip if

• You require support for newer AM5 sockets
• You prefer larger 120mm or 140mm fans for lower noise
• You need a cooler with a copper base for higher TDP

Verdict: AMD Wraith Stealth AM4 90mm Aluminum Cooler fits users who need a compact, direct-mount solution for AM4 processors in space-constrained cases.

6 Best am5

Cooler Master Hyper 212 Halo CPU Cooler

Best for: LGA 1700 and AM5 builds with 154mm clearance

Cooler Height

154mm

Heat Pipes

4

Fan Size

120mm

Fan Speed

2050 RPM

Lighting

ARGB

Socket Compatibility

AM5, LGA 1700

View on Amazon: Cooler Master Hyper 212 Halo CPU Cooler

This Cooler Master Hyper 212 Halo uses four copper heat pipes and a 120mm fan to cool LGA 1700 and AM5 sockets. Its 154mm height fits most cases. The fan reaches 2050 RPM for 51.88 CFM airflow. It includes ARGB lighting compatible with 3-pin headers. You get a compact, black aluminum heatsink that simplifies installation on modern Intel and AMD platforms.

Pros

• Four 6mm copper heat pipes for direct contact
• 120mm fan delivers 51.88 CFM airflow
• Compatible with LGA 1700 and AM5 sockets
• ARGB Gen 2 lighting with auto-detection

Cons

• 154mm height may not fit small cases
• Requires 3-pin motherboard header for lighting
• No included software for RGB control

Good fit if

• You need LGA 1700 or AM5 support
• You want a 120mm fan with ARGB
• Your case allows 154mm cooler height

Skip if

• Your case has less than 154mm clearance
• You require 4-pin PWM fan control
• You need a cooler under 150mm tall

Verdict: Cooler Master Hyper 212 Halo 120mm ARGB fits LGA 1700 and AM5 builds with a 154mm height. It suits users who want ARGB lighting and a 120mm fan.

7 Also great

AMD Wraith Spire Aluminum AM4 Cooler

Best for: Basic AM4 desktop cooling needs

Socket Compatibility

AM4

Fan Size

3.81-inch

Material

Aluminum

Features

Fan

Dimensions

3.81 × 3.81 × 3.81 inches

View on Amazon: AMD Wraith Spire Aluminum AM4 Cooler

The AMD Wraith Spire is a stock cooler designed for AM4 sockets. It uses an extruded aluminum heatsink with pre-applied thermal paste. The unit includes a 3.81-inch fan connected via a 4-pin power cable. This compact 3.81-inch cube fits standard desktop cases. It suits users who need a basic, no-fuss cooling solution for their processor without extra setup.

Pros

• Supports AM4 motherboard sockets
• Includes pre-applied thermal paste
• Uses a 4-pin power connector
• Compact 3.81-inch cubic design

Cons

• Only supports the AM4 socket
• Uses a smaller 3.81-inch fan
• Aluminum heatsink has limited capacity

Good fit if

• You own an AM4 processor
• You want a pre-assembled cooler
• You need a compact stock unit

Skip if

• You use a different socket type
• You need high-end cooling performance
• You require RGB lighting effects

Verdict: AMD Wraith Spire AM4 Aluminum Cooler is a straightforward stock solution for AM4 builds. It fits users who want a simple, plug-and-play cooler for standard desktop cases.

Specifications side by side

Frequently asked questions

See also

• thermalright tl 9015 CPU fan alternatives
• comviee replacement fan alternatives