Best Thermalright White CPU Coolers in 2026: 15 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right thermalright white CPU cooler depends on your case clearance, socket compatibility, and cooling requirements. We evaluated 15 models strictly using the specifications published on their official product listings.
The Thermalright Peerless Assassin 120 White Dual Tower takes the top position because its dual-tower heatsink pairs six 6mm heat pipes with dual 120mm fans for all-white builds needing dual-tower cooling performance. This guide helps you decide which cooler height, heat pipe layout, and motherboard socket support best fit your desktop build.
Quick picks
The best fit for you
- You want dual-tower cooling performance without RGB lighting. Thermalright Peerless Assassin 120 White Dual Tower Six 6mm heat pipes and dual fin stacks deliver high dissipation across modern sockets without lighting hardware.
- You need a compact single tower with addressable lighting. Thermalright Assassin X 120 White ARGB Four heat pipes and a 148 mm height ensure dependable cooling while fitting inside tighter clearances.
- You are building a low-profile small-form-factor desktop. Thermalright AXP120-X67 White ARGB Cooler A 67 mm vertical clearance packs six copper heat pipes into space-constrained cases.
- You want five heat pipes in mid-sized cases. Thermalright Assassin King 120 SE White ARGB Five 6 mm heat pipes deliver 66.17 CFM airflow inside a compact 148 mm tower.
Our 15 picks
Thermalright Peerless Assassin 120 White Dual Tower
Best for: all-white builds needing dual-tower cooling performance
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA115x/1200/1700/1851/2011
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 White Dual Tower
The Thermalright Peerless Assassin 120 White is a dual-tower CPU air cooler equipped with two 120mm TL-C12W PWM fans. It features six 6mm copper heat pipes and an aluminum heatsink standing 157mm tall. With a maximum airflow of 66.17 CFM and a noise ceiling of 25.6 dBA, it suits you if you want high thermal capacity for modern Intel LGA 1700/1851 or AMD AM4/AM5 processors without integrated lighting.
Pros
- Dual-tower design with six 6mm copper heat pipes
- Two 120mm PWM fans deliver up to 66.17 CFM of airflow
- Broad socket support covering AMD AM4/AM5 and Intel LGA 1700/1851
- Rated maximum noise output capped at 25.6 dBA
Cons
- 157mm height requires sufficient PC case clearance
- No integrated RGB or ARGB lighting
Good fit if
- You have a PC chassis with at least 157mm of CPU cooler height allowance.
- You use an AMD AM4/AM5 or Intel LGA 1700/1851 processor.
- You want an all-white dual-tower cooler without lighting.
Skip if
- You need integrated ARGB lighting on your cooler fans.
- You use a compact small-form-factor case with limited clearance.
Verdict: Thermalright Peerless Assassin 120 White provides robust dual-tower cooling via six 6mm heat pipes and dual 120mm fans. It is an effective option for mainstream and high-end sockets if you want non-RGB white hardware.
Thermalright Peerless Assassin 120 SE White ARGB
Best for: High-TDP Intel and AMD white gaming builds
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1851, 1200
- Cooler Height
- 155mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 SE White ARGB
This dual-tower white CPU air cooler features six 6 mm copper heat pipes and two 120 mm ARGB PWM fans. Standing 155 mm tall, it handles thermal loads between 120W and 265W with airflow up to 66.17 CFM and a maximum noise rating of 25.6 dB(A). It suits you if you need balanced, high-wattage cooling for modern AMD or Intel processors inside a standard mid-tower case.
Pros
- Six 6 mm AGHP copper heat pipes rated for 120W to 265W TDP
- Two 120 mm PWM fans with up to 66.17 CFM airflow
- Low rated fan noise ceiling of 25.6 dB(A)
- Wide socket support covering AM4, AM5, LGA 1700, and LGA 1851
Cons
- 155 mm overall height requires adequate case clearance
- 135 mm cooler width may crowd tall memory modules
Good fit if
- You run an Intel or AMD processor with a TDP up to 265W.
- You want dual white 120 mm ARGB PWM fans included out of the box.
- You have a PC chassis with at least 155 mm of cooler height clearance.
Skip if
- You need a low-profile cooler for a compact small-form-factor chassis.
- You prefer a build without addressable RGB lighting.
Verdict: Thermalright Peerless Assassin 120 SE White ARGB delivers dual-tower cooling with six heat pipes and addressable RGB fans for high-wattage processors. It balances strong airflow with low noise levels in standard desktop cases.
Thermalright Assassin X 120 White ARGB
Best for: compact white mid-range desktop builds
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 115X, 1200, 1700, 1851
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- TDP Rating
- 125-225 W
The Thermalright Assassin X 120 ARGB White is a single-tower CPU cooler built for mid-sized computer cases. Standing 148 mm tall, it provides clearance for cases that cannot accommodate larger dual-tower heatsinks. You get four 6 mm heat pipes rated for thermal loads up to 225W TDP and a 120 mm PWM fan generating up to 66.17 CFM. It suits you if you run mainstream processors.
Pros
- Compact 148 mm height fits mid-sized cases with limited clearance
- Four 6 mm heat pipes support thermal loads between 125W and 225W TDP
- 120 mm PWM fan pushes up to 66.17 CFM with noise capped at 25.6 dB(A)
- Broad socket support covering Intel LGA 1700/1851 and AMD AM4/AM5
Cons
- Includes four heat pipes rather than the six found on larger models
- Features a single cooling fan instead of a dual-fan configuration
Good fit if
- You need a compact 148 mm cooler that fits inside medium-sized enclosures.
- You want an addressable RGB fan to complement an all-white build.
- You run a processor operating between 125W and 225W TDP.
Skip if
- You want a dual-tower heatsink with two fans for higher thermal headroom.
- You prefer a build without lighting effects.
Verdict: Thermalright Assassin X 120 ARGB White provides capable single-tower cooling with addressable RGB lighting in a compact 148 mm profile. It is a reliable choice when you want clean white aesthetics without clearance issues in mid-sized cases.
Thermalright Peerless Assassin 120 White
Best for: high-TDP processors in white mid-tower builds
- Color
- White (what this guide is about)
- Cooler Height
- 157 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1500 RPM
The Thermalright Peerless Assassin 120 White Dual Tower is a dual-tower air cooler coated in an all-white finish with matching aluminum top covers. It pairs two 120mm PWM fans reaching up to 66.17 CFM with six 6mm copper heat pipes and a 9,600 cm² dissipation area. Standing 157mm tall, it fits standard mid-tower cases while using an offset design for RAM clearance. You will find it suits high-heat desktop processors needing quiet, heavy-duty cooling.
Pros
- Six 6mm sintered copper heat pipes built with AGHP technology
- Two 120mm PWM fans pushing up to 66.17 CFM of airflow
- Large 9,600 cm² dual-tower heat dissipation area
- Asymmetric offset layout maintains clearance for memory and the top PCIe slot
- Quiet operation rated at 25.6 dB(A) or lower at 1,500 RPM
Cons
- Stands 157mm tall, requiring a chassis with sufficient cooler clearance
- Total weight of 1.02kg adds substantial mass to the CPU socket area
Good fit if
- You need high thermal capacity from a dual-tower heatsink with six heat pipes.
- You build inside a mid-tower or full-tower case supporting at least 157mm cooler height.
- You want a clean white aesthetic without blocking memory modules or PCIe slots.
Skip if
- You use a compact or small-form-factor case with tight vertical clearance.
- You prefer a lighter single-tower cooler to reduce strain on the motherboard.
Verdict: Thermalright Peerless Assassin 120 White Dual Tower delivers high thermal dissipation through dual fin stacks and six copper heat pipes. It provides full-size cooling performance for mainstream and high-end sockets while preserving space for RAM modules.
Thermalright Peerless Assassin 120 White ARGB Cooler
Best for: dual-tower airflow in white mid-tower builds
- Color
- White (what this guide is about)
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler
This dual-tower white CPU cooler pairs two 120mm ARGB PWM fans with six 6mm copper heat pipes. Standing 155mm tall, it fits standard mid-tower cases while clearing memory slots. The two fans push up to 66.17 CFM of airflow at noise levels under 25.6 dB(A). If you need balanced dual-fan cooling performance and integrated lighting for modern AMD or Intel sockets, this setup gives you high heat dissipation capacity.
Pros
- Six 6mm copper heat pipes with AGHP technology
- Dual 120mm PWM ARGB fans reaching up to 66.17 CFM airflow
- Rated maximum operating noise level at or below 25.6 dB(A)
- Wide socket compatibility including Intel LGA 1700/1851 and AMD AM4/AM5
Cons
- Height of 155mm prevents use inside low-profile or slim cases
- Dual-tower 135mm width requires checking clearance around tight motherboard components
Good fit if
- You have a PC case with at least 155mm of vertical CPU cooler clearance.
- You run an AMD AM4/AM5 or Intel LGA 1700/1851 processor requiring dual-tower heat dissipation.
- You want addressable RGB lighting integrated into dual 120mm white fans.
Skip if
- You build inside a compact mini-ITX chassis requiring low-profile cooling.
- You prefer a single-tower design to keep the motherboard layout fully unobstructed.
Verdict: Thermalright Peerless Assassin White ARGB Cooler delivers robust dual-tower cooling with dual 120mm fans and six heat pipes for contemporary Intel and AMD builds. It gives you capable thermal dissipation and lighting without exceeding standard 155mm case clearance limits.
Thermalright Assassin X 120R White CPU Cooler
Best for: compact mid-tower builds needing white ARGB cooling
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1851/1700/1200/1150/1151
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
View on Amazon: Thermalright Assassin X 120R White CPU Cooler
This Thermalright cooler is a compact single-tower white heatsink built with four copper heat pipes and a pure copper base. It stands 148 mm tall, pairing an aluminum fin stack with a 120 mm ARGB PWM fan that moves up to 66.17 CFM at 25.6 dB(A). It suits you if you need a clean white cooler for standard cases and mainstream Intel or AMD processors.
Pros
- Compact 148 mm total height fits cases with limited clearance
- Four pure copper heat pipes paired with a pure copper base
- Maximum airflow of 66.17 CFM at noise levels under 25.6 dB(A)
- Wide compatibility covering Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- Single-tower layout provides less surface area than dual-tower models
- Comes with only one 120 mm cooling fan
Good fit if
- You need a 148 mm clearance profile for a compact or mid-tower case.
- You want customizable 5V 3-pin ARGB lighting on a white frame.
- You are building on modern platforms like LGA 1700, LGA 1851, AM4, or AM5.
Skip if
- You prefer a dual-tower heatsink with twin cooling fans.
- You want a blackout build without ARGB lighting.
Verdict: Thermalright Assassin X White ARGB CPU Cooler delivers balanced single-tower cooling with a 148 mm clearance height and addressable lighting. It serves standard desktop platforms that need dependable thermal performance without taking up excessive motherboard space.
Thermalright Peerless Assassin 120 SE White ARGB
Best for: dual-tower white PC builds needing ARGB
- Color
- White (what this guide is about)
- Socket Compatibility
- Intel 115X/1200/1700/1851, AMD AM4/AM5
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 SE White ARGB
This dual-tower white CPU air cooler uses six 6mm heat pipes and a copper base to handle heat transfer. You get two 120mm PWM fans with ARGB lighting that run up to 1550 RPM, pushing up to 66.17 CFM of airflow at 25.6 dB(A) maximum noise. At 155mm tall, it fits many mid-tower cases while cooling modern AMD and Intel platforms. It suits you if you want dual-fan airflow with addressable lighting.
Pros
- Dual 120mm PWM fans deliver up to 66.17 CFM of airflow
- Six 6mm AGHP copper heat pipes prevent gravity-related performance loss
- Maximum rated fan noise stays at 25.6 dB(A)
- Wide socket compatibility covers Intel LGA 1851 and AMD AM5
Cons
- Height of 155mm requires sufficient PC case clearance
- Total weight reaches 1.87 pounds
- No listed support for Intel LGA 2011 or LGA 2066 sockets
Good fit if
- You need high airflow paired with addressable RGB lighting.
- You build on an Intel LGA 1700, LGA 1851, or AMD AM5 platform.
- You have at least 155mm of vertical cooler clearance in your chassis.
Skip if
- You need a low-profile cooler for a slim small-form-factor case.
- You prefer an all-white build without any RGB lights.
Verdict: Thermalright Peerless Assassin 120 SE White ARGB pairs dual 120mm PWM fans with six heat pipes to deliver balanced cooling on modern sockets. It serves as a dependable, lighted dual-tower option for full-sized white desktop builds.
Thermalright Assassin King 120 SE White ARGB
Best for: Mid-sized cases needing compact five-pipe cooling
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 1700, 1851, 1200, 115X
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Assassin King 120 SE White ARGB
Thermalright Assassin King 120 SE White ARGB is a single-tower air cooler with five 6 mm heat pipes. You get a 148 mm total height, an aluminum heatsink, and a 120 mm PWM fan delivering up to 66.17 CFM airflow at 25.6 dB(A) maximum noise. It suits your mid-sized build if you need standard tower cooling, ARGB lighting, and clearance for sockets including AMD AM4/AM5 and Intel LGA 1700/1851.
Pros
- Five 6 mm AGHP heat pipes
- Compact 148 mm overall heatsink height
- TL-C12CW-S PWM fan moves up to 66.17 CFM
- Maximum rated fan noise of 25.6 dB(A)
Cons
- Includes single fan rather than dual fans
- Fan bearing lifespan rated for 20,000 hours
Good fit if
- You need a 148 mm tall cooler for a medium-sized case
- You want five heat pipes paired with ARGB lighting
- You use Intel LGA 1700/1851 or AMD AM4/AM5 sockets
Skip if
- You need an ultra-compact low-profile cooler under 70 mm
- You require a dual-tower heatsink with dual fans
Verdict: Thermalright Assassin King 120 SE White ARGB provides five 6 mm heat pipes and 66.17 CFM airflow inside a 148 mm tower. It is a solid single-fan white cooling solution for mainstream Intel and AMD desktop processors.
Thermalright 67mm Low-Profile White ARGB Cooler
Best for: compact small-form-factor builds needing low clearance
- Color
- White (what this guide is about)
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright 67mm Low-Profile White ARGB Cooler
The Thermalright AXP120 67mm White ARGB Cooler is a compact top-down heatsink designed for small-form-factor systems. At 67mm tall, it packs six 6mm copper heat pipes and an aluminum fin stack over a pure copper base. A slim 15mm PWM fan moves up to 59 CFM of air while keeping noise under 26.1 dB(A). It suits you if your build requires low vertical clearance.
Pros
- Total height of 67mm fits tight small-form-factor cases
- Six 6mm AGHP copper heat pipes with a pure copper base
- Slim 120mm PWM fan moves up to 59 CFM at 26.1 dB(A) maximum noise
- Includes 5V 3-pin ARGB lighting
Cons
- AMD socket support in published specs is limited to AM4
- Total 67mm height exceeds clearance limits of ultra-compact sub-50mm enclosures
Good fit if
- You build in a small-form-factor case with at least 67mm of vertical clearance.
- You want six heat pipes in a low-profile top-down cooler.
- You run an Intel LGA 1700/1200/115x or AMD AM4 processor.
Skip if
- You use an AMD socket not listed in the specifications, such as AM5.
- You have an ultra-slim chassis requiring a cooler under 50mm tall.
Verdict: Thermalright AXP120 67mm White ARGB Cooler provides a 67mm low-profile footprint packed with six heat pipes and addressable lighting. It delivers dependable top-down cooling for compact Intel and AM4 builds.
Thermalright AXP120-X67 White ARGB Cooler
Best for: compact white small-form-factor PC builds
- Color
- White (what this guide is about)
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
The Thermalright AXP120 Low-Profile White Cooler gives you a compact cooling option for small-form-factor builds. It stands 67 mm tall and features six 6 mm heat pipes paired with an aluminum fin stack and a copper base. A slim 15 mm PWM fan delivers up to 59 CFM of airflow at 26.1 dB(A) maximum noise with 5V ARGB lighting. You can install it in tight cases needing white hardware.
Pros
- Low 67 mm total height fits compact cases
- Six 6 mm AGHP copper heat pipes
- Slim 15 mm PWM fan with 5V ARGB lighting
- Copper base with electroplated reflow soldering
Cons
- Does not list AMD AM5 socket support
- Maximum airflow limited to 59 CFM by slim fan
Good fit if
- You build in a compact case requiring under 70 mm cooler clearance.
- You want addressable RGB lighting on a white low-profile heatsink.
- You use an Intel LGA 1700/1851 or AMD AM4 processor.
Skip if
- You run an AMD AM5 processor.
- You have clearance for a standard full-height tower cooler.
Verdict: Thermalright AXP120 Low-Profile White Cooler delivers 67 mm clearance cooling using six heat pipes and a slim ARGB fan. It serves compact white PC configurations that need quiet top-down heat dissipation.
Thermalright 67mm Low Profile White ARGB Cooler
Best for: low-profile and small-form-factor PC builds
- Color
- White (what this guide is about)
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright 67mm Low Profile White ARGB Cooler
This is a low-profile white air cooler designed for compact desktop builds. At 67 mm in total height, it pairs a slim 15 mm ARGB fan with six 6 mm copper heat pipes and an aluminum fin stack on a copper base. You get support for Intel LGA 1700, 1851, and AMD AM5 sockets. It suits you if your small-form-factor case lacks vertical clearance for standard tower coolers.
Pros
- Compact 67 mm total height fits space-constrained computer cases
- Six 6 mm copper heat pipes paired with a pure copper base
- Slim 120 mm PWM fan includes 5V 3-pin ARGB illumination
- Supports modern Intel LGA 1700, LGA 1851, and AMD AM5 sockets
Cons
- Slim 15 mm fan tops out at 59 CFM of maximum airflow
- Socket support for AMD excludes platforms older than AM4
Good fit if
- You need a white CPU cooler with a total height clearance under 70 mm.
- You want 5V addressable RGB lighting integrated into a slim 120 mm fan.
- You build on an AMD AM4, AM5, or modern Intel LGA platform.
Skip if
- You have a full-size case that can fit taller full-profile tower heatsinks.
- You require fan airflow higher than 59 CFM for sustained heavy workloads.
Verdict: Thermalright 67mm Low Profile White ARGB Cooler provides six copper heat pipes and addressable lighting in a 67 mm profile. It gives space-limited systems adequate cooling without intruding on tight vertical clearances.
Thermalright Assassin King 120 White ARGB
Best for: compact mid-tower builds needing white ARGB cooling
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700/1851/1150/1151/1200
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Tower Design
- Single-Tower
- Fan Size
- 120mm
This is a compact single-tower CPU cooler finished in white with addressable RGB lighting. Standing 148 mm tall, it fits mid-sized cases that cannot clear taller 155 mm towers. You get five 6 mm heat pipes, a copper base, and a 120 mm PWM fan pushing up to 66.17 CFM at 25.6 dB(A). It suits you if you need reliable cooling for modern Intel or AMD processors in a space-limited build.
Pros
- Compact 148 mm height fits cases with tighter clearance limits
- Five 6 mm pure copper heat pipes with AGHP III anti-gravity technology
- 120 mm PWM fan pushes 66.17 CFM with a maximum 25.6 dB(A) noise rating
- Hardware support for Intel LGA 1700/1851 and AMD AM4/AM5 sockets
Cons
- Single heatsink tower offers less surface area than dual-tower models
- Single-fan setup moves less total air than dual-fan configurations
Good fit if
- You need a white CPU cooler under 150 mm in height for your chassis.
- You want five heat pipes paired with an addressable RGB 120 mm fan.
- You run an Intel LGA 1700/1851 or AMD AM4/AM5 processor.
Skip if
- You need a dual-tower heatsink configuration for heavier thermal loads.
- You need a low-profile cooler below 70 mm for a small-form-factor case.
Verdict: Thermalright Assassin King 120 SE White ARGB delivers balanced cooling performance with five heat pipes and a quiet 120 mm ARGB fan. Its 148 mm height makes it an easy fit for space-constrained cases requiring a clean white aesthetic.
Thermalright Assassin King 120 SE White ARGB
Best for: mid-sized white PC builds needing low-noise cooling
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1200, 17XX
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM ± 10%
View on Amazon: Thermalright Assassin King 120 SE White ARGB
This is a white CPU cooler built with five 6mm heat pipes and an aluminum heatsink. At 148mm in height, it fits medium-sized computer cases. The bundled 120mm PWM fan delivers up to 66.17 CFM airflow with noise levels capped at 25.6 dB(A). It gives you addressable RGB lighting, an S-FDB fan bearing, and wide compatibility across Intel LGA 1700, Intel 1200, and AMD AM5 sockets.
Pros
- Five 6 mm AGHP heat pipes
- Compact 148 mm total height fits medium-sized computer cases
- Maximum fan noise level rated at 25.6 dB(A)
- Delivers up to 66.17 CFM airflow via a 120 mm PWM fan
Cons
- Single-fan heatsink configuration rather than dual-fan
- Fan service life rated at 20,000 hours
- No mounting support listed for Intel LGA 2066 or older platforms
Good fit if
- You need a 148 mm tall white cooler for a medium-sized chassis.
- You want five heat pipes paired with an addressable RGB fan.
- You run a modern Intel LGA 1700 or AMD AM4/AM5 processor.
Skip if
- You require a dual-tower heatsink with two fans.
- You use unlisted legacy sockets such as Intel LGA 2011 or LGA 2066.
Verdict: Thermalright Assassin King 120 SE White ARGB is a compact 148 mm single-tower cooler featuring five heat pipes and low-noise ARGB illumination. It offers practical thermal clearance and reliable airflow for modern Intel and AMD systems.
Thermalright Peerless Assassin 120 Dual-Tower White ARGB
Best for: dual-tower white builds needing quiet airflow
- Color
- White (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 Dual-Tower White ARGB
This is a dual-tower white CPU air cooler featuring six 6 mm copper heat pipes and a 9,600 cm² aluminum heatsink area. It includes two 120 mm ARGB PWM fans delivering up to 66.17 CFM of airflow at 25.6 dB(A). The 157 mm overall height and offset heatsink design leave clearance for memory and graphics cards. It suits you if you need balanced, high-volume cooling for Intel or AMD builds.
Pros
- Six 6 mm copper heat pipes with AGHP technology
- Dual 120 mm ARGB PWM fans with 66.17 CFM maximum airflow
- Offset asymmetric layout preserves memory and PCIe slot clearance
- Rated noise level at or below 25.6 dB(A)
Cons
- 157 mm total height requires adequate chassis clearance
- Fan speed is capped at 1,500 RPM
Good fit if
- You need a dual-tower white cooler with motherboard-controlled ARGB lighting.
- You use modern mainstream sockets such as Intel LGA 1700/1851 or AMD AM4/AM5.
Skip if
- You build in a compact PC chassis with under 157 mm of cooler clearance.
- You prefer a slim single-tower footprint that covers less motherboard area.
Verdict: Thermalright Peerless Assassin 120 White ARGB delivers dual-tower cooling with six heat pipes and two balanced ARGB fans. Its offset heatsink design prevents memory blocking while maintaining high airflow across Intel and AMD platforms.
Thermalright 92mm Slim White Fan
Best for: low-profile heatsink replacements and compact builds
- Color
- White (what this guide is about)
- Fan Size
- 92mm
- Fan Speed
- 2700 RPM
- Features
- Fan
- Dimensions
- 3.62 × 3.62 × 0.59 inches
This is a standalone 92 mm white slim fan rather than a full heatsink cooler. It measures 15 mm thick, making it ideal if you need to replace or add a fan to a low-profile CPU cooler. You get up to 2,700 RPM via a 4-pin PWM connection, delivering up to 42.58 CFM of airflow and 1.33 mm H2O air pressure at 22.4 dBA.
Pros
- 15 mm slim depth fits tight clearance spaces
- Delivers up to 42.58 CFM airflow and 1.33 mm H2O static pressure
- Four corner vibration-absorbing pads reduce operating vibration
- 4-pin PWM control allows variable speed up to 2,700 RPM
Cons
- Includes fan only with no heatsink or CPU bracket
- Smaller 92 mm size moves less air than 120 mm fans
- Lacks integrated ARGB lighting
Good fit if
- You need a 15 mm slim replacement fan for a low-profile heatsink.
- You want 4-pin PWM fan speed control reaching up to 2,700 RPM.
- You are building inside a compact chassis with limited cooler clearance.
Skip if
- You need a complete CPU cooler with heatsink and mounting hardware.
- You require a standard 120 mm fan mount.
- You want built-in ARGB lighting.
Verdict: Thermalright 92mm Slim White Fan provides a compact 15 mm cooling solution for small-form-factor heatsinks and restricted spaces. It delivers up to 2,700 RPM with 4-pin PWM control while keeping rated noise at 22.4 dBA.
Specifications side by side
| Spec | Thermalright Peerless Assassin 120 White Dual Tower | Thermalright Peerless Assassin 120 SE White ARGB | Thermalright Assassin X 120 White ARGB | Thermalright Peerless Assassin 120 White | Thermalright Peerless Assassin 120 White ARGB Cooler | Thermalright Assassin X 120R White CPU Cooler | Thermalright Peerless Assassin 120 SE White ARGB | Thermalright Assassin King 120 SE White ARGB | Thermalright 67mm Low-Profile White ARGB Cooler | Thermalright AXP120-X67 White ARGB Cooler | Thermalright 67mm Low Profile White ARGB Cooler | Thermalright Assassin King 120 White ARGB | Thermalright Assassin King 120 SE White ARGB | Thermalright Peerless Assassin 120 Dual-Tower White ARGB | Thermalright 92mm Slim White Fan |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | AM4, AM5, LGA115x/1200/1700/1851/2011 | AM4, AM5, LGA1700, 115X, 1851, 1200 | AM4, AM5, LGA 115X, 1200, 1700, 1851 | not specified | not specified | AM4, AM5, LGA1851/1700/1200/1150/1151 | Intel 115X/1200/1700/1851, AMD AM4/AM5 | AM4, AM5, LGA 1700, 1851, 1200, 115X | not specified | not specified | not specified | AM4, AM5, LGA1700/1851/1150/1151/1200 | AM4, AM5, LGA1700, 115X, 1200, 17XX | AM4, AM5, LGA1700, LGA1851 | not specified |
| Cooler Height | 157mm | 155mm | 148 mm | 157 mm | 155 mm | 148 mm | 155 mm | 148mm | 67mm | 67mm | 67mm | 148mm | 148mm | 157mm | not specified |
| Heat Pipes | 6 | 6 | 4 | 6 | 6 | 4 | 6 | 5 | 6 | 6 | 6 | 5 | 5 | 6 | not specified |
| Tower Design | Dual-Tower | Double tower | not specified | Dual-Tower | Dual-Tower | Single-Tower | Dual-Tower | not specified | Low-Profile | Low-Profile | Low-Profile | Single-Tower | not specified | Dual-Tower | not specified |
| Fan Size | 120mm | 120mm | 120 mm | 120 mm | 120 mm | 120 mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 92mm |
| TDP Rating | not specified | 120 to 265W | 125-225 W | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Fan Speed | 1550 RPM | 1550rpm±10% | 1550 RPM | 1500 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1800 RPM | 1800 RPM | 1800 RPM | 1550rpm±10% | 1550 RPM ± 10% | 1500 RPM ± 10% | 2700 RPM |
| Lighting | not specified | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | not specified |
| Color | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White |
| Material | not specified | not specified | not specified | Aluminum | Aluminum | not specified | Aluminum | not specified | not specified | not specified | not specified | not specified | not specified | Aluminum | not specified |
| Features | not specified | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan | not specified | Fan | Fan | Fan | Fan |
| Dimensions | 6.18 × 5.31 × 4.92 inches | 4.72 × 0.98 × 4.72 inches | 5.83 × 4.92 × 2.8 inches | 6.18 × 5.31 × 4.92 inches | 4.92 × 5.31 × 6.1 inches | 6.1 × 4.92 × 2.8 inches | 6.1 × 5.31 × 4.92 inches | 5.83 × 4.92 × 2.87 inches | 4.86 × 4.72 × 2.6 inches | 4.86 × 4.72 × 2.64 inches | 4.86 × 4.72 × 2.64 inches | 4.92 × 2.87 × 5.83 inches | 0.98 × 4.72 × 4.72 inches | 4.9 × 5.3 × 6.18 inches | 3.62 × 3.62 × 0.59 inches |
| Weight | 2.2 pounds | 2 pounds | 1 pounds | 2 pounds | 1.87 pounds | 1.39 pounds | 1.87 pounds | 1.4 pounds | 1.34 pounds | 1.34 pounds | 1.34 pounds | 1.4 pounds | 1 pounds | 1 pounds | not specified |
| Size | PA120 series | 6 Heat Pipe | 4 Heat pies | not specified | PA120 SE series | 4 Heatpies | 6 Heatpipes | 5 Heat pies | 67mm | AXP120 series | 67mm | 5 Heatpies | AK120 SE WHITE ARGB | 6 Heatpipes | not specified |
| Model | pa120 White | PA120 SE WHITE ARGB 1700-D2 | AX120 SE ARGB WHITE-D2 | PA120 White-D2 | not specified | AX120 SE ARGB WHITE-D1 | PA120 SE WHITE ARGB 1700-d6 | AK120 SE WHITE ARGB-d2 | not specified | AXP120-X67 WHITE ARGB 1700-d2 | not specified | AK120 SE WHITE ARGB-d1 | AK120 SE WHITE ARGB-D6-2 | not specified | TL-9015W D6 |
If you need additional airflow across your heatsink, you can compare specifications for the best thermalright case fans for CPU Cooler.
How to Choose a Thermalright White Cooler
-
Match Vertical Case Clearance
Case depth determines the cooler height your chassis can house. Standard mid-tower cases easily accommodate full-sized tower coolers measuring up to 6.1 inches tall. If you use a compact or small-form-factor chassis, taller towers can prevent the side panel from closing properly. In those restricted enclosures, select a top-down model like the Thermalright AXP120-X67 White ARGB Cooler. Its 67 mm profile provides adequate motherboard component clearance while fitting into tight spaces where vertical room is limited.
-
Verify AMD Socket Compatibility
Motherboard socket specifications differ between processor generations, so you must check bracket support. While most Thermalright white coolers support mainstream sockets, older or specialized revisions may support AM4 without including AM5 mounting hardware. The Thermalright 67mm Low-Profile White ARGB Cooler, for example, lists AM4 alongside Intel sockets but does not list AM5. If you are building on AMD's latest platform, verify that AM5 is explicitly stated in the socket specifications before you finalize your hardware selection.
-
Check RGB Header Support
White coolers feature either addressable RGB illumination or clean, unlit hardware. If you select an ARGB model, your motherboard must have an appropriate 3-pin 5V addressable header to power and synchronize the LEDs. If your build prioritizes a minimalist appearance without extra lighting cables, choose a non-lit model. The Thermalright Peerless Assassin 120 White Dual Tower offers a clean, all-white aesthetic with standard dual fans, eliminating the need to manage secondary lighting wires inside your computer chassis.
-
Inspect Memory Module Clearances
Dual-tower coolers provide substantial cooling area, but their broad dimensions can overhang your motherboard memory slots. When installing tall RAM modules with raised heatspreaders, wide coolers can interfere with the inner slots. Check the cooler layout for cutouts or offset fin arrays. The Thermalright Peerless Assassin 120 Dual-Tower White ARGB uses an offset heatsink design to prevent memory blocking. This ensures your RAM modules fit cleanly into their sockets without pressing against the cooling fins or the front intake fan.
-
Evaluate Fan Thickness Requirements
Restricted case compartments often leave minimal space between the heatsink and surrounding components like graphics cards or power supplies. Standard cooling fans measure 25 mm thick, which may cause clearance conflicts in tight chassis configurations. If you need a replacement or secondary intake in a tight space, inspect slim fan options. The Thermalright 92mm Slim White Fan measures only 15 mm thick while providing 4-pin PWM control up to 2,700 RPM, fitting spaces standard fans cannot clear.
-
Consider Total Cooler Weight
Heatsink mass directly reflects the volume of aluminum and copper used in the construction. Large dual-tower configurations weigh upwards of two pounds, requiring sturdy backplates and careful mounting pressure against the processor. Single-tower options often weigh closer to one pound, exerting less physical stress on the motherboard during transit. If you frequently transport your desktop computer, a lighter model such as the Thermalright Assassin King 120 SE White ARGB provides solid structural stability while minimizing mechanical strain.
Frequently asked questions
Do Thermalright white CPU coolers support Intel LGA 1700 and LGA 1851 sockets?
Yes, many Thermalright white coolers support both Intel LGA 1700 and LGA 1851 sockets alongside older platforms like LGA 1200. For instance, the Peerless Assassin 120 SE White ARGB and Assassin King 120 SE White ARGB list compatibility with LGA 1851, LGA 1700, and AMD AM5. You should verify individual product specs before installing, as socket brackets vary between specific versions.
Which Thermalright white CPU cooler is designed for small form factor builds?
The Thermalright AXP120-X67 models are engineered specifically for compact small-form-factor systems. These low-profile coolers feature a total vertical height of 67 mm while integrating six heat pipes and a slim ARGB fan. This top-down profile provides dedicated processor cooling inside cramped desktop cases without interfering with narrow vertical chassis dimensions or nearby hardware.
What is the difference between Peerless Assassin and Assassin X white coolers?
The primary difference is the heatsink structure and heat pipe configuration. The Peerless Assassin 120 White uses a dual-tower layout equipped with six heat pipes and two 120 mm fans. In contrast, the Assassin X 120 White uses a slimmer single tower with four heat pipes and a 148 mm height, offering a lighter profile for mid-range systems.
Are all Thermalright white CPU coolers equipped with RGB lighting?
No, Thermalright offers both illuminated and non-RGB white coolers. Models like the Peerless Assassin 120 SE White ARGB and Assassin King 120 SE White ARGB feature addressable RGB fans for illuminated setups. If you prefer a completely clean, unlit appearance, the standard Peerless Assassin 120 White Dual Tower provides the same multi-pipe thermal structure without any LED components.
How much airflow does the Thermalright Assassin King 120 SE White provide?
The Thermalright Assassin King 120 SE White ARGB delivers a rated airflow of 66.17 CFM. This single-tower cooler combines that airflow with five 6 mm copper heat pipes inside a 148 mm tall frame. This layout provides steady thermal dissipation for mainstream AMD AM4, AM5, and Intel LGA 1700 or LGA 1851 processors in standard desktop setups.
How do Thermalright dual-tower white coolers prevent RAM interference?
Thermalright dual-tower designs utilize an offset heatsink structure to maintain clearance around motherboard memory slots. The Peerless Assassin 120 Dual-Tower White ARGB is specifically shaped to preserve space for RAM modules while running dual fin stacks and two fans. This offset helps you install standard desktop memory kits without the front fan or cooling fins blocking neighboring slots.
What are the specifications of the Thermalright 92mm slim white fan?
The Thermalright 92mm Slim White Fan (TL-9015W D6) has a 15 mm thickness, measuring 3.62 by 3.62 inches overall. It reaches rotational speeds up to 2,700 RPM using a 4-pin PWM header for automated motherboard speed control. The unit produces a manufacturer-rated noise level of 22.4 dBA, making it suited for tight small-form-factor builds or compact heatsink replacements.