Awxlumv Large Aluminum Heatsink 4.72''x2.72''x1.06'' Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The awxlumv large aluminum heatsink 4 72 x2 72 x1 06 alternatives provide options for buyers who need different dimensions or features. This original heatsink offers a substantial 120 x 69 x 27mm footprint with 22 fins for passive cooling. You might look for alternatives if you require a lower profile, a multi-pack, or a different brand. The products listed here were chosen because their specifications overlap with the original.
The list includes options like the 150x93x15mm model for low-clearance needs and the 25mm mini heatsinks for compact boards. Some alternatives come with thermal tape, while others focus on specific components like VRMs or power transistors. You can compare these 6 picks to find the exact size and material that fits your electronic layout. Each option serves a distinct purpose, from broad heat spreading to targeted component cooling. This guide helps you select the right aluminum heatsink based on your spatial constraints and thermal requirements.
Our top pick: Awxlumv 120mm Aluminum Heatsink.
How alternatives compare to Awxlumv
Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack
This 150x93x15mm heatsink offers a much wider footprint than the original 120mm model, spreading heat across a larger horizontal area. You gain a 4.3 mm base plate for better contact with wide components. However, you sacrifice vertical height, dropping from 27 mm to just 15 mm. This makes it ideal for low-clearance electronics where the taller original would not fit. It comes as a two-pack, doubling your cooling capacity for multiple chips. If you need broad heat dissipation in a slim profile, this premium option replaces the original’s deeper fins with a wider, flatter design.
Awxlumv 25mm Small Aluminum Heatsink 6-Pack
The 25mm mini heatsinks differ significantly in scale. You trade the original’s large 120x69mm surface area for compact 25x25x10mm blocks. This six-pack allows you to cool multiple small components simultaneously, which the single large unit cannot do. The height drops to 10 mm, fitting into very tight spaces. You give up the extensive fin structure of the original but gain modularity. This budget-friendly choice suits compact boards where individual chips need separate cooling zones. It is not a direct replacement for high-heat loads but excels in distributing cooling across several low-power devices.
Walfront Black Aluminum Heatsink 50x12.7x100mm
This Walfront heatsink is a compact alternative at 50x12.7x100mm. It is significantly narrower than the original 69 mm width, making it suitable for tight spaces like routers. The height remains low at 12.7 mm, compared to the original’s 27 mm. You lose the original’s broader 120 mm length and 22-fin structure. This model is designed for small electronic components rather than large power transistors or NVMe drives. It is not suitable for high-heat desktop processors. If your space is constrained horizontally and vertically, this smaller black aluminum block provides targeted cooling where the original would be too bulky.
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
These 80x40x11mm heatsinks are much smaller and shorter than the original. You get two units with pre-applied thermal tape, simplifying installation. The height is only 11 mm, half that of the original’s 27 mm profile. The surface area is reduced to fit space-constrained hardware where taller coolers cannot clear. You lose the large 120 mm footprint but gain easy mounting for small electronics. This option is best for passive cooling on compact devices. If you need to cool multiple small components in a low-profile setup, these tape-backed units offer a practical alternative to the single, larger original heatsink.
SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink
The SGTKJSJS heatsink measures 5.9 x 2.91 x 0.39 inches. It is shorter than the original 1.06 inch height, fitting low-clearance applications. You receive two units with adhesive backing, providing more coverage than the single original. The material is black anodized aluminum, similar to the original. You give up the 22-fin structure for a simpler design. This option is suitable for low-to-medium heat loads like power transistors. If you need two smaller cooling blocks with easy installation for regulators or transistors, this pair offers a practical passive solution where the original’s height would be excessive.
Awxlumv 40x40x20mm Aluminum Heatsink
This 40x40x20mm heatsink is a compact square block, far smaller than the original’s rectangular 120x69mm shape. The height is 20 mm, slightly less than the original’s 27 mm. You gain pre-applied thermal tape for easier mounting. This model is designed for small components like VRMs and chipsets. It is not a direct alternative for large power modules or NVMe drives due to its reduced surface area. If you need low-power chip cooling in tight spaces, this small aluminum block fits where the original would be too large. It offers targeted cooling for specific motherboard components rather than broad heat dissipation.
Quick picks
Our 7 picks
Awxlumv 120mm Aluminum Heatsink
Best for: passive cooling on wide electronic components
- Material
- Black anodized aluminum
- Compatible Device
- Computer, MOSFET, NVME SSD, GPU
- Dimensions
- 120 x 69 x 27mm
- Weight
- 7.76 ounces
This Awxlumv heatsink is a passive aluminum radiator designed for heat dissipation across electronics and PC components. Measuring 120 by 69 by 27 millimeters (4.72 by 2.72 by 1.06 inches), it provides 22 cooling fins to disperse thermal buildup. Weighing 0.49 pounds, it suits your build if you need passive cooling for power transistors, voltage regulators, MOSFETs, or external NVMe drives.
Pros
- Large 120 x 69 x 27 mm footprint for passive heat transfer
- 22 integrated cooling fins maximize surface area
- Black anodized aluminum construction
Cons
- No thermal adhesive or mounting tape included in the package
- Requires at least 27 mm (1.06 inches) of vertical clearance
Good fit if
- You need a 120 x 69 mm passive aluminum heatsink with 22 fins.
- You are cooling larger components like voltage regulators, power amplifiers, or external drive enclosures.
Skip if
- You require pre-applied thermal adhesive or mounting accessories.
- You have tight enclosures with under 27 mm of clearance.
Verdict: Awxlumv 120x69x27mm Aluminum Heatsink provides substantial passive surface area through its 22-fin aluminum structure. It serves as an effective cooling block for electronics where you have 1.06 inches of vertical space.
Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack
Best for: low-profile cooling across wide electronic components
- Material
- Aluminum
- Dimensions
- 150 x 93x 15 mm
- Color
- Black
- Weight
- 10.9 ounces
View on Amazon: Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack
This Awxlumv heatsink is a black aluminum cooler measuring 5.9 by 3.6 by 0.59 inches (150 by 93 by 15 mm). It features a 4.3 mm base plate and 2 mm thick fins, weighing 310 grams. If you need a wide, low-profile cooling surface for computers, power transistors, voltage regulators, or MOSFETs, this gives you broad surface area coverage in tight vertical clearances where tall fin stacks cannot fit.
Pros
- Substantial 4.3 mm thick aluminum base board
- Sturdy 2 mm thick cooling fins
- Broad 150 by 93 mm surface area footprint
- Provides 310 g of aluminum thermal mass
Cons
- Low 15 mm total height limits vertical fin clearance
- Thermal tape or mounting paste not listed
Good fit if
- You need a wide 150 by 93 mm footprint for component coverage.
- You require a low-profile 15 mm height for tight enclosures.
- You are cooling power components like MOSFETs, ICs, or voltage regulators.
Skip if
- You need taller fins than 15 mm for passive vertical draft.
- You require pre-applied thermal adhesive in the package.
Verdict: Awxlumv 150x93x15mm Aluminum Heatsink delivers a wide footprint and a thick 4.3 mm base plate for low-clearance electronic components. It suits applications requiring broad horizontal heat spread within a slim 15 mm vertical profile.
Awxlumv 25mm Small Aluminum Heatsink 6-Pack
Best for: cooling multiple small components on compact boards
- Material
- anodized aluminum
- Cooling Method
- passive cooling
- Compatible Device
- ASUS ROG Ally
- Dimensions
- 25 x 25 x 10mm
- Mounting Type
- Pre-applied thermal conductive tape
- Color
- Black
This Awxlumv set includes six mini black anodized aluminum heatsinks measuring 25 by 25 by 10 millimeters each. Every unit weighs 5.7 grams and features an eight-by-eight fin arrangement. Pre-applied thermal conductive adhesive tape covers the base for direct attachment without liquid glue. You get modular cooling suited for small components like chipsets, power ICs, stepper motors, or handheld devices rather than a single large continuous surface.
Pros
- Includes six individual 25 x 25 x 10 mm anodized aluminum heatsinks
- Pre-applied thermal conductive adhesive tape backing on each piece
- 8 x 8 pin fin matrix design for multidirectional heat dissipation
- Lightweight construction at 5.7 grams per piece
Cons
- Small 25 x 25 mm footprint does not cover large integrated heat spreaders
- Adhesive tape mounting provides lower retention force than mechanical hardware
Good fit if
- You need to cool multiple small electronic components such as power ICs or stepper motors.
- You want tool-free installation using pre-applied thermal adhesive tape.
Skip if
- You require a single large heat spreader for high-wattage desktop processors.
- You prefer screw-down or clip-on mechanical mounting hardware.
Verdict: Awxlumv 25mm Mini Aluminum Heatsink 6-Pack delivers multi-point cooling for compact electronics with its pre-taped aluminum array. It provides a modular thermal solution when single large heatsinks will not fit your layout.
Walfront Black Aluminum Heatsink 50x12.7x100mm
Best for: Small electronic components in tight spaces
- Material
- Aluminum
- Compatible Device
- Router, CPU, Amplifier, Motherboard
- Dimensions
- 50x12.7x100mm
- Color
- Black
View on Amazon: Walfront Black Aluminum Heatsink 50x12.7x100mm
This Walfront heatsink is a black aluminum block measuring 50 x 12.7 x 100 mm. It features slotted fine teeth to improve heat dissipation. The compact structure and light weight make it easy to install or remove. You can use it for routers, CPUs, amplifiers, and power supplies. It helps reduce hardware failure from overheating. This option suits projects needing a small, efficient cooling fin.
Pros
- Black aluminum construction
- Slotted fine teeth for heat dissipation
- Compact 50 x 12.7 x 100 mm size
- Lightweight and easy to install
Cons
- Very narrow 12.7 mm width limits surface area
- No thermal adhesive or mounting hardware included
- Small base footprint restricts use to small chips
Good fit if
- You need a small heatsink for a router or amplifier
- You have limited space around the component
- You are cooling a low-power electronic component
Skip if
- You require a large surface area for high heat loads
- You need a heatsink with included mounting screws
- You are cooling a standard desktop CPU
Verdict: Walfront Black Aluminum Heatsink 50x12.7x100mm is a compact cooling solution for small electronic components. It fits well in tight spaces for routers or power modules. It is not suitable for high-heat desktop processors.
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
Best for: compact passive cooling on small electronics
- Material
- Black anodized aluminum
- Cooling Method
- Passive
- Compatible Device
- 3D printers, LEDs, FPV transmitters
- Dimensions
- 80 x 40 x 11mm
- Mounting Type
- Thermal conductive adhesive tape
- Weight
- 1.26 ounces
This package includes two black anodized aluminum heatsinks designed for passive cooling. Each unit measures 80 x 40 x 11 mm (3.15 x 1.57 x 0.44 inches) and weighs 1.26 ounces (36 grams). They feature pre-coated thermal tape backing for direct mounting without extra paste. This setup suits you if you need compact, low-profile cooling on electronics like 3D printers, LEDs, or FPV transmitters.
Pros
- Includes two black anodized aluminum heatsinks
- Pre-coated thermal tape backing for installation
- Low 0.44-inch (11 mm) vertical profile
- Lightweight build at 1.26 ounces (36 grams) per unit
Cons
- Smaller 80 x 40 mm footprint than 120 x 69 mm alternatives
- Lower 11 mm height provides less vertical fin area than 27 mm models
- Uses adhesive tape rather than mechanical screw mounts
Good fit if
- You need a low-profile heatsink under 0.5 inches tall.
- You want pre-applied thermal adhesive backing for installation.
- You cool compact electronics like 3D printers, LEDs, or FPV transmitters.
Skip if
- You need a full-sized 120 x 69 mm cooling surface.
- You require mechanical mounting hardware instead of thermal tape.
Verdict: ZZHXSM 80x40x11mm Black Aluminum Heatsinks deliver compact passive heat dissipation with pre-applied adhesive tape. They fit space-constrained hardware where taller 27 mm coolers cannot clear.
SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink
Best for: passive cooling of power transistors
- Material
- Aluminum
- Dimensions
- 5.9 x 2.91 x 0.39 inch
- Mounting Type
- Thermal Conductive Adhesive Tape
- Color
- Black
- Weight
- 10.7 ounces
This SGTKJSJS heatsink measures 5.9 x 2.91 x 0.39 inches. It is made of pure aluminum with a black anodized finish. Each unit weighs 10.7 ounces for a pair. The base includes pre-coated thermal tape for easy mounting. You get two pieces in the package. This size fits power transistors, FETs, ICs, and voltage regulators on PCB boards.
Pros
- Includes two black anodized aluminum heatsinks
- Pre-coated thermal tape backing for installation
- Dimensions of 150 x 74 x 10 mm
- Pure aluminum construction for heat dissipation
Cons
- Only 0.39 inches thick for limited surface area
- No fan included for active cooling
- Fixed thermal tape limits repositioning
Good fit if
- You need passive cooling for power components
- You require a compact black heatsink
- You want two units in one package
Skip if
- You need active cooling with a fan
- You require a thicker heatsink for high heat
- You need adjustable mounting options
Verdict: SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink offers a simple passive solution for low-to-medium heat loads. It fits users who need two black heatsinks with adhesive backing for transistors or regulators.
Awxlumv 40x40x20mm Aluminum Heatsink
Best for: Small VRM and chipset cooling
- Material
- Aluminum alloy
- Dimensions
- 1.57 x 1.57 x 0.79 inches
- Mounting Type
- Thermal Conductive Adhesive Tape
- Color
- Black
- Compatible Device
- GPU, VRM, 3D Printer
- Weight
- 3.76 ounces
This 40x40x20 mm aluminum heatsink measures 1.57 x 1.57 x 0.79 inches. It features a black anodized finish and includes pre-applied thermal adhesive tape. The kit contains four units for cooling VRMs, GPU backplates, or chipsets. You get reliable heat dissipation for enclosed environments. The compact size fits tight spaces where larger coolers cannot go.
Pros
- 40x40x20 mm aluminum alloy construction
- Pre-applied thermal conductive adhesive tape
- Black anodized finish for corrosion resistance
- Includes four heatsinks per kit
Cons
- Small 40 mm size limits heat dissipation capacity
- Adhesive backing may not suit all mounting surfaces
- No included mounting hardware for screw attachment
Good fit if
- You need to cool small VRMs or chipsets
- You have limited space for a 40 mm footprint
- You want a simple adhesive installation method
Skip if
- You require high airflow cooling for large processors
- You prefer screw-mounted heatsinks over adhesive
- You need a single large heatsink instead of a kit
Verdict: Awxlumv 40mm Aluminum Heatsink is a compact solution for small components like VRMs. It fits tight spaces well. You should choose it for low-power chip cooling.
Specifications side by side
| Spec | Awxlumv 120mm Aluminum Heatsink | Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack | Awxlumv 25mm Small Aluminum Heatsink 6-Pack | Walfront Black Aluminum Heatsink 50x12.7x100mm | ZZHXSM 80mm Black Aluminum Heatsink 2-Pack | SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink | Awxlumv 40x40x20mm Aluminum Heatsink |
|---|---|---|---|---|---|---|---|
| Material | Black anodized aluminum | Aluminum | anodized aluminum | Aluminum | Black anodized aluminum | Aluminum | Aluminum alloy |
| Cooling Method | not specified | not specified | passive cooling | not specified | Passive | not specified | not specified |
| Compatible Device | Computer, MOSFET, NVME SSD, GPU | not specified | ASUS ROG Ally | Router, CPU, Amplifier, Motherboard | 3D printers, LEDs, FPV transmitters | not specified | not specified |
| Dimensions | 120 x 69 x 27mm | 150 x 93x 15 mm | 25 x 25 x 10mm | 50x12.7x100mm | 80 x 40 x 11mm | 5.9 x 2.91 x 0.39 inch | 1.57 x 1.57 x 0.79 inches |
| Mounting Type | not specified | not specified | Pre-applied thermal conductive tape | not specified | Thermal conductive adhesive tape | Thermal Conductive Adhesive Tape | Thermal Conductive Adhesive Tape |
| Color | Black | Black | Black | Black | Black | Black | Black |
| Features | not specified | not specified | not specified | not specified | Thermal Tape | Thermal Tape | Thermal Tape |
| Weight | 7.76 ounces | 10.9 ounces | 1.27 ounces | not specified | 1.26 ounces | 10.7 ounces | 3.76 ounces |
| Model | 69x27 mm | 2個 | 25x25x10 mm | not specified | AHEATS-80x40x11-2 | 2DSRP-1571 | 40x40x20 mm |
| Size | not specified | 2 Pcs | 25 x25 x10 | not specified | not specified | not specified | not specified |
If you want cooling for liquid pumps, you can evaluate barrow d5 pump heatsink top alternatives.
Frequently asked questions
Which alternative is best for low-profile electronics?
The Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack is the best premium choice for low-clearance applications. It features a wide footprint and a thick 4.3 mm base plate designed for broad horizontal heat spreading. This slim 15 mm vertical profile suits components where taller coolers do not fit.
How do I cool multiple small components?
The Awxlumv 25mm Small Aluminum Heatsink 6-Pack provides a modular solution for compact boards. Each unit measures 25 x 25 x 10 mm and comes with pre-taped adhesive for easy installation. This pack allows you to target heat sources individually where single large heatsinks cannot fit your layout.
Is there an option for tight router spaces?
The Walfront Black Aluminum Heatsink 50x12.7x100mm fits well in tight spaces for routers or power modules. It is a compact cooling solution for small electronic components. Note that this specific model is not suitable for high-heat desktop processors, so verify your thermal requirements before purchasing.
What heatsink works for power transistors?
The SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink offers a simple passive solution for low-to-medium heat loads. It includes two black heatsinks with adhesive backing, making it ideal for transistors or regulators. The dimensions allow it to fit in areas where standard 27 mm coolers are too tall.
Can I use these for VRM cooling?
The Awxlumv 40x40x20mm Aluminum Heatsink is the best VRM option for small components. It is designed for low-power chip cooling and fits tight spaces well. The compact 40 mm size and included thermal tape make it a practical choice for motherboard voltage regulator modules or similar small electronics.
Which alternative is the most budget-friendly?
The Awxlumv 25mm Small Aluminum Heatsink 6-Pack is rated as the best budget option. It delivers multi-point cooling for compact electronics at a lower cost per unit. The pre-taped aluminum array allows you to cover several small components simultaneously, providing a versatile thermal solution for various board layouts.
Do these heatsinks include adhesive tape?
Several alternatives include pre-applied adhesive tape for easy mounting. The ZZHXSM 80mm Black Aluminum Heatsink 2-Pack and the SGTKJSJS 5.9 x 2.91 model both feature thermal tape. The Awxlumv 40x40x20mm also includes thermal tape. This simplifies installation on components where mounting screws are not feasible.
What is the weight of the large alternative?
The Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack weighs 10.9 ounces. This is the total weight for the two-pack set. The substantial mass helps absorb and dissipate heat effectively across the wide 150x93 mm footprint, providing stable passive cooling for wide electronic components in low-profile scenarios.