15 Best Heatsinks for PS5, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the best heatsinks for PS5 requires matching thermal specs to your drive’s physical constraints. We compared 15 options based strictly on published specifications. The Easycargo 100-Piece 15mm Copper Shim Kit leads because it offers twelve distinct thickness options in pure C1100 copper for precise gap filling. This guide helps you decide which passive cooling solution fits your specific M.2 SSD form factor and clearance limits.
Quick picks
The best fit for you
- You need precise thermal gap filling for non-standard SSD heights Easycargo 100-Piece 15mm Copper Shim Kit The 15mm copper shim kit offers 12 distinct thickness options for exact height adjustments.
- You require the thinnest possible cooler for tight clearance slots Icepc 1.5mm Graphene Copper M.2 Heatsink This 1.5 mm copper heatsink profile fits easily into the most restrictive PS5 drive bays.
- You want a heatsink that replaces the console's original SSD cover Sabrent PS5 M.2 NVMe Aluminum Heatsink The CNC-machined aluminum design swaps out the stock cover to improve heat dissipation via the native fan.
- You need a cooling solution that accommodates large 22110 SSD sizes GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe The integrated heat pipe and aluminum fin cover supports SSDs up to 22110 in size.
Our 15 picks
Easycargo 100-Piece 15mm Copper Shim Kit
Best for: custom-thickness thermal gap filling on PS5 SSDs
- Compatible Device
- ✓ GPU, Laptop, RAM, PS5, M.2 SSD, VRM
- Material
- Copper C1100
- Length
- 0.6 inches
- Width
- 0.6 inches
View on Amazon: Easycargo 100-Piece 15mm Copper Shim Kit Affiliate link
The Easycargo 15mm Copper Pad Shim Kit gives you 100 pure C1100 copper shims across 12 distinct thicknesses ranging from 0.1mm to 2mm. Rated at 401W/mK thermal conductivity, these 15mm by 15mm plates function as high-conductivity gap fillers between PS5 M.2 SSD components and thermal assemblies. This setup suits you if you need custom thickness matching for drive clearances across 2230, 2242, or 2280 form factors.
Pros
- Pure C1100 copper construction with 401W/mK thermal conductivity
- Includes 100 shims spanning 12 thicknesses from 0.1mm to 2mm
- Compatible with PS5 M.2 NVMe 2230, 2242, and 2280 drives
- Available in options with glue or without glue
Cons
- Small 15mm by 15mm square footprint does not cover full SSDs in one piece
- Does not include an integrated full-length M.2 heatsink body
- Only includes 3 pieces of the 2mm thickness
Good fit if
- You need precise thickness adjustment between 0.1mm and 2mm for thermal gaps.
- You want high thermal conductivity material rated at 401W/mK.
- You are fitting varied M.2 drive sizes such as 2230, 2242, or 2280 in your PS5.
Skip if
- You want a dedicated one-piece full-cover heatsink designed for the PS5 expansion bay.
- You prefer an all-in-one heatsink with built-in mounting screws or clips.
Verdict: Easycargo 15mm Copper Pad Shim Kit provides versatile thermal gap bridging with pure C1100 copper and 12 distinct thickness options. It gives you flexible heat transfer for PS5 M.2 SSDs that require precise height adjustments.
Icepc Graphene Copper M.2 Heatsink
Best for: Low-profile passive cooling for PS5 M.2 SSDs
- Compatible Device
- ✓ Laptop, PS5
- Material
- Copper with Graphene Coating
- Dimensions
- 70x20x2mm
- Mounting Type
- Silicone Thermal Pad
- Weight
- 0.71 ounces
View on Amazon: Icepc Graphene Copper M.2 Heatsink Affiliate link
This icepc heatsink uses pure copper and a graphene coating to transfer heat from your PS5 M.2 SSD. The 70x20x2mm size fits standard 2280 drives. It includes a silicone thermal pad for secure attachment without tools. The slanted slot design aids airflow. You get a compact, high-conductivity solution for keeping your console storage cool.
Pros
- Pure copper base material
- Graphene coating for high thermal conductivity
- Includes silicone thermal pad
- Compact 70x20x2mm dimensions
- Slanted slot airflow design
Cons
- Only 2mm thick, limiting surface area
- No active fan included
- Graphene claims rely on software testing
Good fit if
- You need a low-profile heatsink for tight PS5 spaces
- You want passive cooling for an M.2 NVMe SSD
- You prefer tool-free installation via thermal pad
Skip if
- You require active fan cooling for extreme loads
- You need a thicker heatsink for larger drives
- You are installing on a non-M.2 device
Verdict: icepc PS5 M.2 Copper Heatsink offers a slim, passive cooling option for PS5 owners with standard M.2 SSDs. It suits users prioritizing low height and easy installation over maximum thermal mass.
Icepc 4mm Pure Copper M.2 Heatsink
Best for: tight PS5 M.2 slots with pure copper
- Compatible Device
- ✓ PS5, M.2 SSD
- Material
- Pure Copper
- Dimensions
- 70x20x4mm
- Mounting Type
- Silicone Based Thermal Pad
View on Amazon: Icepc 4mm Pure Copper M.2 Heatsink Affiliate link
This Icepc heatsink is made from pure copper, which offers higher thermal conductivity than aluminum. It measures 2.76 by 0.79 by 0.16 inches and includes a silicone thermal pad. The design supports 70x20mm NGFF SSDs, making it suitable for PS5 M.2 slots. You get a compact solution that fits narrow spaces while providing efficient heat exchange through its air duct design.
Pros
- Pure copper construction for superior heat transfer
- Includes silicone thermal pad for SSD protection
- Compact 4mm height fits narrow PS5 slots
- Designed for 70x20mm NGFF SSDs
Cons
- 4mm height is the lower end of the available range
- Single unit size rather than a multi-pack
- No graphene coating compared to other copper options
Good fit if
- You need a low-profile heatsink for tight PS5 spaces
- You want pure copper thermal performance
- You are installing a 70x20mm M.2 SSD
Skip if
- You require a graphene-coated surface for extra durability
- You need a multi-pack for multiple drives
- You prefer a taller heatsink for maximum surface area
Verdict: Icepc 4mm Pure Copper M.2 Heatsink is a solid choice for users with tight PS5 M.2 slots who prioritize pure copper conductivity over added coatings. It fits the 70x20mm SSD form factor perfectly.
Icepc 1.5mm Graphene Copper M.2 Heatsink
Best for: ultra-low clearance PS5 SSD installations
- Compatible Device
- ✓ Laptop, PS5
- Material
- Copper with graphene coating
- Dimensions
- 70x20x1.5mm
- Mounting Type
- Adhesive thermal pad
- Weight
- 1.59 ounces
View on Amazon: Icepc 1.5mm Graphene Copper M.2 Heatsink Affiliate link
This is a low-profile copper heatsink finished with a graphene coating, designed to cool standard 2280 M.2 NVMe solid-state drives. Measuring 70 by 20 by 1.5 millimeters, its slim 0.059-inch height fits easily into compact drive bays like the PS5 expansion slot. The pre-applied adhesive thermal pad enables tool-free mounting directly onto your drive. It suits you if you need a minimal, low-clearance cooling solution that leaves ample vertical space.
Pros
- Slim 1.5 mm profile fits tight clearances in PS5 and laptop bays
- Copper base construction with graphene coating
- Adhesive thermal pad enables tool-free installation
- Slanted slot layout forms an integrated air duct design
Cons
- Relies on adhesive mounting rather than screws or retention clips
- Lacks a bottom heatsink tray for dual-sided drive cooling
- Measures 70 mm long, leaving the edges of 80 mm drives uncovered
Good fit if
- You need an ultra-thin 1.5 mm heatsink for tight drive compartments.
- You prefer a tool-free setup using an adhesive thermal pad.
- You are cooling a standard 2280 M.2 NVMe SSD.
Skip if
- You prefer mechanical screw or bracket mounting instead of adhesive tape.
- You use an SSD form factor other than 2280.
Verdict: Icepc Graphene Copper M.2 SSD Heatsink delivers an ultra-thin 1.5 mm copper profile that easily slips into tight PS5 drive bays. Its adhesive thermal pad makes installation quick without requiring additional mounting brackets or tools.
Easycargo 20mm Copper Pad Shim Kit
Best for: Custom thermal gap filling in PS5 installations
- Compatible Device
- ✓ GPU, RAM, PS5, VRM
- Material
- Pure Copper C1100
- Dimensions
- 20mm x 20mm
- Weight
- 4.66 ounces
View on Amazon: Easycargo 20mm Copper Pad Shim Kit Affiliate link
This kit provides 40 pure C1100 copper pad shims cut to 20mm by 20mm dimensions for heat transfer. You receive six thicknesses ranging from 0.3mm to 1.5mm, paired with a thermal conductivity rating of 401W/mK. It suits you if you need custom gap fillers to bridge clearance spaces on your PS5 M.2 SSD or VRM components rather than relying on standard thermal pads alone.
Pros
- Pure C1100 copper construction with 401W/mK thermal conductivity
- Includes 40 square pads measuring 20mm by 20mm
- Six different thicknesses ranging from 0.3mm up to 1.5mm
- Functions as a thermal gap filler for PS5 M.2 SSDs and VRMs
Cons
- Square 20mm footprint does not cover a full 2280 M.2 drive in one piece
- Requires manual gap measurement across six included thicknesses
- Does not include mounting brackets or screws
Good fit if
- You need variable-thickness copper shims between 0.3mm and 1.5mm to fill thermal gaps.
- You want high thermal conductivity material rated at 401W/mK for your PS5 drive or VRM.
- You need a multi-piece 20mm by 20mm shim kit for custom cooling setups.
Skip if
- You want a single full-cover heatsink designed to clip directly onto a 2280 drive.
- You prefer pre-applied thermal adhesive or pre-cut full-length thermal strips.
Verdict: Easycargo 40-Piece 20mm Copper Pad Shim Kit provides high-conductivity C1100 copper spacers in six distinct thicknesses for bridging precise thermal gaps. It serves your PS5 setup when standard one-size heatsink pads leave uneven clearances.
Awxlumv Copper M.2 2280 Heatsink
Best for: pure copper M.2 2280 SSD cooling
- Compatible Device
- ✓ PS5
- Material
- 100% Red copper
- Dimensions
- 70x20x8 mm
- Mounting Type
- Rubber band
- Features
- Thermal Pad
- Weight
- 1.59 ounces
View on Amazon: Awxlumv Copper M.2 2280 Heatsink Affiliate link
This Awxlumv heatsink is a pure red copper cooler built for M.2 2280 SSDs inside your PS5 or desktop computer. It features seven copper fins, a 2 mm base, and a rated 397 W/m.K thermal conductivity to manage drive heat. Measuring 70 by 20 by 8 millimeters, it includes a silicone thermal pad and rubber bands for installation. It suits you if you want high thermal conductivity copper cooling for a standard 2280 drive.
Pros
- Pure red copper construction with 397 W/m.K thermal conductivity
- Includes silicone thermal pad and two mounting rubber bands
- Seven integrated cooling fins with a 2 mm base plate
- Compact 70 x 20 x 8 mm dimensions fit M.2 2280 drives
Cons
- Requires rubber bands rather than metal clips or screws for mounting
- Needs at least 12 mm of vertical installation clearance
Good fit if
- You need a pure copper heatsink for a standard M.2 2280 SSD.
- You have at least 12 mm of installation height clearance available.
Skip if
- You want screw-down or rigid metal mounting instead of rubber bands.
- You use an SSD size other than the 2280 form factor.
Verdict: Awxlumv Pure Copper M.2 2280 Heatsink delivers high 397 W/m.K thermal conductivity and solid copper fin cooling for 2280 drives. Its rubber band attachment keeps installation simple if you have 12 mm of vertical clearance.
Sabrent PS5 M.2 NVMe Aluminum Heatsink
Best for: PS5 SSD slot cover replacement cooling
- Compatible Device
- ✓ PS5, M.2 SSD
- Material
- CNC'd aluminum
- Dimensions
- 5.85 x 3 x 0.46 inches
- Weight
- 2.82 ounces
View on Amazon: Sabrent PS5 M.2 NVMe Aluminum Heatsink Affiliate link
The Sabrent heatsink is a CNC-machined aluminum cooler that replaces the native PS5 SSD slot cover. Measuring 5.85 inches long, 3 inches wide, and 0.46 inches tall, it fits directly into the expansion bay to utilize the console fan for cooling. Its sandwich design applies balanced pressure across the drive using included thermal tape and screws. This suits you if you want a slot-replacing heatsink built specifically for PS5 M.2 NVMe storage.
Pros
- Directly replaces the native PS5 SSD expansion slot cover
- CNC-machined aluminum build integrates with the console fan airflow
- Sandwich design maintains even pressure across the SSD
- Ships with thermal tape, mounting screws, and an installation guide
Cons
- Restricted to the PS5 console and compatible M.2 SSD form factors
- Requires removing and setting aside the factory console cover
Good fit if
- You want a heatsink designed to replace the PS5 metal expansion cover directly.
- You prefer an all-in-one bundle that includes thermal tape and mounting screws.
- You need balanced contact pressure from a CNC aluminum sandwich design.
Skip if
- You intend to keep the stock PS5 metal slot cover installed.
- You need a universal heatsink to fit standard desktop PC motherboards.
Verdict: Sabrent PS5 M.2 NVMe Aluminum Heatsink replaces the console's internal SSD cover with CNC-machined aluminum to improve heat dissipation via the native fan. Its sandwich layout and included thermal accessories make it a tailored cooling solution for your PS5 drive.
Icepc 2280 M.2 Graphene Coated Copper Heatsink
Best for: copper-grade cooling in tight PS5 SSD bays
- Compatible Device
- ✓ Laptop, PS5
- Material
- Copper
- Dimensions
- 2.76 x 0.91 x 0.31 inches
- Weight
- 1.75 ounces
View on Amazon: Icepc 2280 M.2 Graphene Coated Copper Heatsink Affiliate link
This is a solid copper 2280 M.2 SSD radiator finished with a graphene coating. Measuring 0.31 inches high, 0.91 inches wide, and 2.76 inches long, it fits standard 22x80mm drives in tight console bays. It includes a silicone thermal pad for tool-free installation and comes in Stripe or Grid styles. It suits you if you want a dense copper cooler sized for PS5 storage expansion.
Pros
- Solid copper construction with graphene surface coating
- Low 0.31-inch height fits slim NVMe drive bays
- Includes silicone thermal conductive pad
- Tool-free thermal pad installation
Cons
- Only fits 2280 form-factor M.2 drives
- Does not replace the PS5 metal expansion slot cover
Good fit if
- You need a 0.31-inch profile heatsink for a 2280 NVMe SSD in your PS5.
- You want copper construction with a graphene coating instead of plain aluminum.
- You prefer tool-free mounting with an included silicone thermal pad.
Skip if
- You use an M.2 SSD size other than 2280.
- You want an all-in-one heatsink that replaces the PS5 bay cover door.
Verdict: Icepc 2280 Graphene Coated Copper Heatsink delivers dense copper cooling in a compact 0.31-inch profile tailored to 2280 NVMe SSDs. It mounts cleanly inside the PS5 drive slot using the included silicone thermal pad.
GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe
Best for: PS5 owners wanting integrated heat pipe cooling
- Compatible Device
- ✓ PS5, M.2 SSD
- Material
- Copper, Aluminum
- Dimensions
- 5 x 2.59 x 0.55 inches
- Weight
- 3.18 ounces
View on Amazon: GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe Affiliate link
This replacement expansion slot cover from GRAUGEAR integrates an aluminum plate-fin heatsink and a direct-touch copper heat pipe directly into your PS5. It measures 5 by 2.59 by 0.55 inches and includes two thermal pads rated at 4.8W/m-k and 3.6W/m-k. It suits you if you need broad drive compatibility, supporting single- or double-sided M.2 NVMe SSDs from sizes 2230 up to 22110.
Pros
- Direct-touch copper heat pipe paired with aluminum plate fins
- Supports M.2 SSD form factors 2230, 2242, 2260, 2280, and 22110
- Compatible with both single-sided and double-sided SSD drives
- Includes two thermal pads rated at 4.8W/m-k and 3.6W/m-k plus screwdriver and screws
Cons
- Replaces the original expansion slot cover rather than fitting underneath it
- Specific 0.55-inch height matches standard PS5 consoles rather than slim bays
Good fit if
- You want an integrated PS5 slot cover with a direct-touch copper heat pipe.
- You are installing single-sided or double-sided M.2 NVMe drives from 2230 to 22110 sizes.
- You want bundled installation tools, including two thermal pads and a screwdriver.
Skip if
- You need a standard heatsink to install inside a generic desktop PC enclosure.
- You prefer to retain the stock metal expansion slot cover on your PS5.
Verdict: GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe replaces your stock expansion bay door with an integrated aluminum fin and copper heat pipe cooler. It accommodates SSD sizes up to 22110 in both single- and double-sided layouts.
Awxlumv M.2 2280 Thermal Pads 6-Pack
Best for: desktop and PS5 SSD heatsink replacements
- Compatible Device
- ✓ PS5
- Material
- Nano Silicon Grease Material
- Dimensions
- 70x22x1mm
- System Type
- Desktop
- Features
- Thermal Pad
- Length
- 2.76 inches
View on Amazon: Awxlumv M.2 2280 Thermal Pads 6-Pack Affiliate link
You get a six-pack of silicone thermal pads designed to sit between an M.2 2280 drive and a heatsink. Each pad measures 70 by 22 millimeters with a 1-millimeter thickness. They feature a thermal conductivity rating of 12.0 W/mK and operate within temperatures from -40 to 200 degrees Celsius. This pack suits you if you need replacement thermal interface material for your PS5 or desktop SSD cooler setup.
Pros
- High 12.0 W/mK thermal conductivity rating
- Includes six pre-cut 70 x 22 x 1 mm pads
- Wide operating temperature range from -40 to 200 degrees Celsius
- Low-viscosity silicone grease design protects SSD labels
Cons
- Supplies thermal pads only without a metal heatsink
- Fixed 1 mm thickness provides no alternative gap options
Good fit if
- You already have a heatsink and need replacement thermal pads
- You want a high 12.0 W/mK conductivity rating for M.2 2280 drives
- You need multiple thermal pads to maintain desktop and PS5 drives
Skip if
- You need a complete metal heatsink rather than thermal pads
- You need thermal pads with a thickness other than 1 mm
Verdict: Awxlumv M.2 2280 Thermal Pad 6-Pack supplies high 12.0 W/mK heat conductivity to fill gaps between your M.2 2280 drive and an external heatsink.
JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink
Best for: ultra-slim copper cooling in tight expansion slots
- Compatible Device
- ✓ Laptop, PS5, M.2 SSD
- Material
- Pure Copper
- Dimensions
- 70x20x2mm
- Features
- Thermal Pad
- Weight
- 1.06 ounces
View on Amazon: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink Affiliate link
The JOYJOM heatsink pairs a pure copper core with a graphite coating for your M.2 2280 drive. Measuring 70 by 20 by 2 millimeters, this ultra-slim plate fits tight spaces inside your PS5 expansion bay. The copper base delivers 401 W/mK thermal conductivity, while grooved surface channels aid passive heat dissipation. It comes with a silicone thermal pad, rubber rings, and heat-resistant bandages, making it suitable if you need low-profile cooling.
Pros
- Pure copper core rated at 401 W/mK thermal conductivity
- Grooved graphite surface expands heat dissipation area
- Ultra-slim 2 mm profile fits tight clearances
- Supplied with silicone thermal pad, rubber rings, and mounting bandages
Cons
- Relies on rubber rings and bandages rather than metal screws or clips
- Single-sided plate leaves the underside of the SSD uncovered
- Provides less thermal mass than thicker multi-finned heatsinks
Good fit if
- You need an ultra-low 2 mm profile heatsink for tight drive bays.
- You want high-conductivity copper coated with grooved graphite.
- You want mounting accessories and a thermal pad included in the box.
Skip if
- You prefer a rigid enclosure fastened with screws rather than bands.
- You require double-sided heatsink coverage for two-sided M.2 drives.
Verdict: JOYJOM Graphite Covered Copper M.2 Heatsink delivers 401 W/mK copper thermal transfer inside an ultra-slim 2 mm profile. It offers straightforward passive cooling for space-limited M.2 2280 solid-state drives.
ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack
Best for: multi-drive setups needing low-profile black aluminum coolers
- Compatible Device
- ✓ PS5, M.2 SSD
- Material
- Alloy aluminum
- Dimensions
- 22 x 80mm
- Mounting Type
- Metal clips + rubber bands
- Color
- Black
- Features
- Thermal Pad
View on Amazon: ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack Affiliate link
This ELUTENG package includes four black oxidized aluminum heatsinks sized for standard 2280 M.2 SSDs. Designed with heat-dissipating surface grooves, each unit pairs with an included thermal silicone pad. You can secure them using either the metal clips or the eight supplied rubber bands. If you need low-profile black cooling covers for multiple M.2 drives inside your PS5, this pack gives you hardware for four separate installations.
Pros
- Includes four aluminum heatsinks and four thermal pads
- Dual mounting options with metal clips and eight rubber bands
- Grooved aluminum surface expands heat dissipation area
- Sized at 22 x 80 mm for standard 2280 M.2 SSDs
Cons
- Uses aluminum rather than copper
- Does not replace the PS5 metal SSD slot expansion cover
Good fit if
- You need black 2280 heatsinks for multiple M.2 SSDs.
- You want flexible mounting using either metal clips or rubber bands.
Skip if
- You only have a single drive to cool and do not need extra units.
- You prefer a copper heatsink over aluminum.
Verdict: ELUTENG 2280 Aluminum Heatsink 4-Pack gives you four low-profile black aluminum coolers with dedicated thermal pads and dual fastening options for 2280 SSDs. It offers a practical multi-drive cooling solution if you want a clean black finish without extra bulk.
Haojiaho 6mm Pure Copper M.2 2280 Heatsink
Best for: compact pure copper PS5 SSD cooling
- Compatible Device
- ✓ Laptop, PS5, M.2 SSD
- Material
- Pure copper
- Dimensions
- 70 x 21 x 6 mm
- Features
- Thermal Pad
- Weight
- 1.64 ounces
View on Amazon: Haojiaho 6mm Pure Copper M.2 2280 Heatsink Affiliate link
This is a pure copper heatsink designed for M.2 2280 solid-state drives, compatible with your PS5 expansion slot. It measures 70 by 21 by 6 mm and features surface grooves to expand heat dissipation area. The package includes a silicone thermal pad and rubber mounting rings. You get direct heat transfer with a stated 5°C to 20°C temperature reduction. It suits you if you need a low-profile copper cooler for an internal console drive.
Pros
- Constructed entirely from pure copper with grooved fins
- Includes a low-viscosity silicone thermal pad
- Compact dimensions of 70 x 21 x 6 mm fit standard M.2 2280 drives
- Comes with rubber rings for mounting
Cons
- Uses rubber rings rather than metal screws or brackets for retention
- Does not replace the native PS5 metal expansion slot cover
Good fit if
- You need a pure copper heatsink that measures 6 mm thick.
- You want an included silicone thermal pad and mounting rings in the box.
- You have an M.2 2280 SSD installed in your PS5.
Skip if
- You prefer a heatsink with rigid screw-mounted brackets instead of rubber rings.
- You want an integrated replacement cover for the PS5 expansion bay.
Verdict: Haojiaho 6mm Pure Copper M.2 Heatsink provides pure copper thermal dissipation in a compact 70 by 21 by 6 mm footprint for M.2 2280 drives. It is an effective passive cooling option that fits inside your PS5 storage compartment using silicone padding and rubber rings.
Haojiaho 67x18x2mm Pure Copper M.2 Heatsink
Best for: tight clearance M.2 2280 SSD cooling
- Compatible Device
- ✓ Laptop, PS5, M.2 SSD
- Socket Compatibility
- M.2 2280 SSD
- Material
- Pure Copper
- Dimensions
- 67x18x2mm
- Features
- Thermal Pad
- Weight
- 0.56 ounces
View on Amazon: Haojiaho 67x18x2mm Pure Copper M.2 Heatsink Affiliate link
This Haojiaho heatsink uses pure copper for efficient heat dissipation. Its ultra-thin 2mm profile allows installation in tight spaces without interference. The kit includes a silicone thermal pad to bridge the gap between your M.2 SSD and the cooler. It is designed for M.2 2280 SSDs and fits PS5 consoles. You get reliable cooling for data transfer speeds in a compact form factor.
Pros
- Constructed from 100% pure copper for high thermal conductivity
- Ultra-thin 2mm thickness avoids interference with nearby components
- Includes a silicone thermal pad for improved heat transfer
- Compatible with M.2 2280 SSDs and PS5 consoles
Cons
- Limited to M.2 2280 size SSDs only
- No active fan for forced air cooling
- Cooling performance varies by 5°C to 20°C depending on environment
Good fit if
- You need a low-profile heatsink for tight PS5 SSD slots
- You want passive cooling for an M.2 2280 NVMe drive
- You prefer pure copper over aluminum for heat dissipation
Skip if
- You require active cooling with a built-in fan
- You use M.2 SSDs larger than 2280 size
- You need a heatsink with adjustable fan speeds
Verdict: Haojiaho 2mm Pure Copper M.2 Heatsink is a solid passive cooling solution for users with limited vertical clearance. It fits best in PS5 drives or laptops where space is tight.
WAVLINK M.2 2280 Aluminum SSD Heatsink
Best for: single- and double-sided PS5 M.2 SSDs
- Compatible Device
- ✓ PS5
- Material
- Aluminum alloy
- Dimensions
- 2.87 x 0.91 x 0.35 in
View on Amazon: WAVLINK M.2 2280 Aluminum SSD Heatsink Affiliate link
This WAVLINK heatsink is an aluminum cooler sized for standard 2280 M.2 SSDs inside your PS5 or compact PC builds. It stands 0.354 inches tall, fitting the console expansion bay without clearance issues. An integrated 3mm height adjustment accommodates both single-sided and double-sided solid-state drives. Included dual thermal silicone pads and mounting tools cover installation directly out of the box if you want a straightforward cooling upgrade.
Pros
- Includes dual thermal silicone pads for top and bottom coverage
- 3mm adjustable height supports single-sided and double-sided drives
- Low-profile 0.354-inch height fits PS5 SSD expansion slots
- Mounting tools included in the package
Cons
- Only fits 2280 length M.2 drives
- Aluminum construction without copper components
Good fit if
- You need a 2280 heatsink that fits both single-sided and double-sided M.2 SSDs.
- You want an aluminum cooler that comes with top and bottom thermal pads plus tools.
Skip if
- You are installing an M.2 drive with a form factor other than 2280.
- You want a pure copper heatsink rather than aluminum alloy.
Verdict: WAVLINK M.2 2280 Aluminum SSD Heatsink provides reliable aluminum cooling and flexible height adjustments for single- or double-sided PS5 drives. Its low 0.354-inch profile and included thermal pads ensure a clean fit inside the console slot.
Specifications side by side
| Spec | Easycargo 100-Piece 15mm Copper Shim Kit | Icepc Graphene Copper M.2 Heatsink | Icepc 4mm Pure Copper M.2 Heatsink | Icepc 1.5mm Graphene Copper M.2 Heatsink | Easycargo 20mm Copper Pad Shim Kit | Awxlumv Copper M.2 2280 Heatsink | Sabrent PS5 M.2 NVMe Aluminum Heatsink | Icepc 2280 M.2 Graphene Coated Copper Heatsink | GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe | Awxlumv M.2 2280 Thermal Pads 6-Pack | JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink | ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack | Haojiaho 6mm Pure Copper M.2 2280 Heatsink | Haojiaho 67x18x2mm Pure Copper M.2 Heatsink | WAVLINK M.2 2280 Aluminum SSD Heatsink |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | M.2 2280 SSD | not stated |
| Material | Copper C1100 | Copper with Graphene Coating | Pure Copper | Copper with graphene coating | Pure Copper C1100 | 100% Red copper | CNC'd aluminum | Copper | Copper, Aluminum | Nano Silicon Grease Material | Pure Copper | Alloy aluminum | Pure copper | Pure Copper | Aluminum alloy |
| Compatible Device | PC, Laptop GPU, CPU, M.2 NVMe SSD | M.2 2280 SSD, Laptop PC | M.2 2280 SSD, Laptop PC | M.2 2280 NVMe SSD, PS5, Laptop PC | CPU, GPU, VGA, RAM, VRM, PS5 SSD | M.2 2280 SSD, Desktop PC, PS5 | PS5 console | M.2 NVMe SSD, PS5, Laptop, PC | PS5, M.2 NVMe SSD | M.2 2280 SSD | M.2 2280 SSD, Laptop, PS5 | M.2 2280 SSD | M.2 2280 SSD, PS5, Nintendo Switch | not stated | M.2 2280 SSD, PC, PS5 |
| Dimensions | not stated | 70x20x2mm | 70x20x4mm | 70x20x1.5mm | 20mm x 20mm | 70x20x8 mm | 5.85 x 3 x 0.46 inches | 2.76 x 0.91 x 0.31 inches | 5 x 2.59 x 0.55 inches | 70x22x1mm | 70x20x2mm | 22 x 80mm | 70 x 21 x 6 mm | 67x18x2mm | 2.87 x 0.91 x 0.35 in |
| Mounting Type | not stated | Silicone Thermal Pad | Silicone Based Thermal Pad | Adhesive thermal pad | not stated | Rubber band | not stated | not stated | not stated | not stated | not stated | Metal clips + rubber bands | not stated | not stated | not stated |
| System Type | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | Desktop | not stated | not stated | not stated | not stated | not stated |
| Color | Copper | Black | not stated | not stated | not stated | gold | PS5 HEATSINK | Black | Silver | Grey | Black | Black | Copper | Copper | Multicolored |
| Features | not stated | Thermal Pad | Thermal Pad | not stated | not stated | Thermal Pad | not stated | not stated | not stated | Thermal Pad | Thermal Pad | Thermal Pad | Thermal Pad | Thermal Pad | not stated |
| Length | 0.6 inches | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 2.76 inches | not stated | not stated | not stated | not stated | not stated |
| Width | 0.6 inches | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 0.87 inches | not stated | not stated | not stated | not stated | not stated |
| Weight | not stated | 0.71 ounces | not stated | 1.59 ounces | 4.66 ounces | 1.59 ounces | 2.82 ounces | 1.75 ounces | 3.18 ounces | 1.41 ounces | 1.06 ounces | 2.47 ounces | 1.64 ounces | 0.56 ounces | not stated |
| Model | ES-C100-1515 | CAICEPC0008-2 | ICEPC0009-4 | ICEPC0016-1.5 | 2020XXC40 | M.2-Copper 1Pcs | SB-PSHS | ICEPC0026-B | G-PS5HS04 | 70x22x1mm | 70x20x2mm | not stated | Thk. 6mm | Thk. 2mm | Heatsink 880X |
| Size | not stated | 70*20*2mm | 4mm | 70x20x1.5mm | not stated | 1Pcs | M.2 NVMe PS5 Heatsink | not stated | not stated | 2.75; 0.87; 0.04 | not stated | not stated | not stated | not stated | not stated |
How to Choose the Right PS5 Heatsink
-
Compare Base Metal Conductivity
When choosing a heatsink, check the raw material and its rated thermal conductivity. Copper delivers rapid heat transfer from the SSD controller, reaching up to 401 W/mK on models like the JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink. Aluminum models offer lighter weight and effective heat dissipation across larger surface areas. If your drive runs demanding tasks that generate sudden heat spikes, copper provides higher thermal conductivity. For balanced, everyday cooling without adding extra weight to the drive slot, standard aluminum provides reliable performance.
-
Verify Supported SSD Form Factor
You must match the heatsink specifications to your solid-state drive length. Most consumer M.2 drives use the standard 2280 format, measuring 80 millimeters long. However, some drives follow the extended 22110 form factor. If you plan to install a non-standard drive, check that the cooler specifically lists support for that length. The GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe accommodates SSD sizes up to 22110. Choosing a model built strictly for 2280 will leave longer drives uncovered or prevent proper mounting inside the console expansion bay.
-
Measure Vertical Clearance Requirements
Check the total height specification of the cooler to ensure it fits beneath the PS5 drive bay cover. Direct-attach heatsinks vary significantly in thickness, from slim metal plates to tall fin stacks. For instance, the Awxlumv Copper M.2 2280 Heatsink stands 0.31 inches tall and requires 12 mm of vertical clearance to sit properly. If your cooler is too tall, the metal bay door will not close flush over the drive. Always verify height dimensions against available clearance before finalizing your choice.
-
Check Drive PCB Component Layout
Check whether your M.2 drive has memory chips mounted on one side or both sides of the circuit board. Single-sided drives have a flat underside, while double-sided drives place chips beneath the PCB, creating uneven contact surfaces. Coolers like the WAVLINK M.2 2280 Aluminum SSD Heatsink provide flexible height adjustments designed to accommodate both single- and double-sided layouts. Using a cooler that does not account for bottom-mounted components can bend the SSD board or leave the bottom memory chips without direct thermal contact.
-
Evaluate Thermal Pad Conductivity Ratings
Heatsinks rely on thermal interface pads to bridge microscopic gaps between the SSD chips and the metal radiator. Check the thermal conductivity rating of the included or replacement pads, measured in W/mK. For example, the Awxlumv M.2 2280 Thermal Pads 6-Pack specifies a high 12.0 W/mK rating. Higher ratings transfer heat faster across the gap. If you select thick pads with low thermal conductivity, heat will remain trapped near the controller, reducing overall cooling efficiency regardless of how large the heatsink metal block is.
-
Consider Mounting and Fastening Styles
Examine how the heatsink secures to the SSD. Basic designs use elastic silicone rings or rubber bands, which allow fast, tool-free installation but can degrade over years of thermal cycling. Other models provide more permanent mechanical attachments, such as the ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack, which features dual fastening options. A rigid fastening setup maintains consistent clamping pressure across the drive length. This pressure keeps the thermal pad tightly compressed against the controller and NAND flash, ensuring steady heat transfer over long gaming sessions.
Frequently asked questions
Do I need a heatsink for my PS5 M.2 SSD?
Yes, adding a heatsink helps manage heat in the console’s drive bay. The PS5’s internal fan blows air over the cooler to dissipate thermal energy. Without adequate cooling, sustained write speeds may drop as the drive throttles. A proper heatsink maintains optimal operating temperatures during long gaming sessions or large file transfers.
What is the difference between copper and aluminum heatsinks?
Copper transfers heat faster than aluminum due to higher thermal conductivity. Products like the Easycargo 15mm Copper Shim Kit use pure C1100 copper for rapid heat spreading. Aluminum options, such as the Sabrent model, are lighter and often cheaper. Both materials work well when paired with a thermal pad to bridge the gap between the SSD and the cooler.
How thick can a PS5 M.2 heatsink be?
The PS5 drive slot has limited vertical clearance, so thickness matters. Many slim heatsinks measure 1.5 mm to 4 mm, fitting easily into tight spaces. Thicker options like the 6mm Haojiaho model require more room. You must ensure the total height, including the thermal pad, does not prevent the drive from seating correctly or the cover from closing.
Can I use a standard M.2 heatsink on a PS5?
Many standard M.2 2280 heatsinks work if they fit within the console’s height limits. The Icepc 4mm Pure Copper model is designed for the 70x20mm form factor. However, some covers like the GRAUGEAR unit replace the entire expansion bay door. Always verify the dimensions match your specific drive size and the available clearance inside the PS5 slot.
Do I need thermal pads with a PS5 heatsink?
Yes, a thermal pad is essential for transferring heat from the SSD to the heatsink. Most listed products, including the Icepc Graphene Copper model, include an adhesive thermal pad. The pad fills the gap between the drive’s chips and the cooler. Without it, air pockets would insulate the drive and reduce cooling efficiency significantly.
What is the best heatsink for a PS5 Slim?
The PS5 Slim has tighter clearance, so you need a thinner profile. The Icepc 1.5mm Graphene Copper heatsink is ideal for ultra-low clearance installations. It measures only 0.06 inches high. Slimmer options ensure the drive fits without forcing the console’s side panel, which could damage the plastic casing or prevent proper airflow from the internal fan.
Does a heatsink affect PS5 game loading times?
A heatsink does not directly increase speed, but it prevents thermal throttling. When an SSD gets too hot, it slows down to protect itself. By keeping temperatures lower, a heatsink like the Awxlumv Pure Copper model helps maintain consistent read and write speeds. This ensures smooth performance during large asset loads without sudden drops in throughput.
How do I install a PS5 M.2 heatsink?
Installation involves placing the thermal pad on the SSD, attaching the heatsink, and securing it. Some models use rubber bands, like the Awxlumv heatsink, for simple attachment. Others, like the Sabrent cover, replace the bay door entirely. Ensure the drive is fully seated in the M.2 slot before closing the console to avoid hardware damage.
See also
- best heatsinks with RGB
- best heatsinks for m 2 SSD
- best active heatsinks
- best CPU coolers under 30
- best CPU coolers under 50
- 15 Best CPU Coolers Under $100, Compared
- Best CPU Coolers for AM4 in 2026: 15 Picks Ranked by Specs
- Best CPU Coolers for AM5: 15 Spec-Based Picks
- best gaming monitors for PS5
- best handheld gaming PCs for PS5














