Icepc 1.5mm Graphene Copper M.2 Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This icepc m 2 heatsink ps5 pci e review focuses on the Icepc 1.5mm Graphene Copper M.2 Heatsink. It is a passive cooling solution for 2280 NVMe SSDs. The product is defined by its 1.5mm thickness and 70x20mm footprint. It uses a copper base with a graphene coating to improve heat transfer. The listing claims graphene conducts heat better than pure copper. You install it using an adhesive thermal pad. This design fits narrow spaces in laptops and PS5 consoles. It is built for users who need compact thermal management without bulky fans or active components.
What stands out
- Graphene-coated copper base for enhanced thermal conductivity
- Compact 70x20x1.5mm dimensions for tight spaces
- Adhesive thermal pad for tool-free installation
- Slanted slot design for improved airflow and aesthetics
Who it fits
Good fit for
This heatsink suits users with 2280 NVMe SSDs in constrained environments. It is ideal for PS5 owners who need a low-profile solution. Laptop users with limited internal space will benefit from the 1.5mm height. The adhesive mounting makes it easy to install without tools. If you want a simple, passive cooling method for your drive, this spec-focused option fits your needs.
Who should skip it
You should look elsewhere if you need active cooling. This product has no fan or power connection. It may not suffice for high-end SSDs under heavy sustained loads. Users requiring larger surface areas should consider the 4.0mm height variation. If you prefer screw-mounted solutions over adhesive pads, this design is not for you. It is strictly a passive heatsink.
Verdict: The Icepc 1.5mm Graphene Copper M.2 Heatsink offers a compact, passive cooling solution for 2280 NVMe SSDs. Its low profile and adhesive mounting make it suitable for tight spaces like PS5 and laptops.
Key specs explained
Material: Copper with graphene coating
The base is copper, known for reliable heat transfer, topped with a graphene layer. Graphene has high thermal conductivity, which helps move heat away from the SSD faster than standard metals alone. This combination targets users who want maximum passive cooling efficiency without active fans. It differs from pure aluminum sinks by offering better thermal performance. You should check if your case has enough airflow to support this passive design effectively.
Dimensions: 70x20x1.5mm
The heatsink measures 70mm by 20mm with a very thin 1.5mm profile. This low height makes it ideal for tight spaces, such as laptop bays or PS5 drive slots where clearance is limited. Standard CPU air coolers are much larger and would not fit here. The small footprint ensures it does not interfere with nearby components. Verify your storage slot dimensions before purchasing to ensure a proper physical fit within your device.
Mounting Type: Adhesive thermal pad
Installation uses a thermal adhesive pad rather than screws or clips. This allows for quick, tool-free attachment directly to the SSD. It is convenient for users who want a clean look without protruding hardware. However, removal can be messy compared to mechanical mounts. This method is common for M.2 drives. Ensure the surface is clean before application to maintain good thermal contact between the pad and the SSD chip.
Compatible Device: M.2 2280 NVMe SSD, PS5, Laptop PC
This unit is designed specifically for 2280 size M.2 NVMe drives. It works with popular SSDs like Samsung and WD models. It is also compatible with the PlayStation 5 expansion slot and various laptops. It is not a CPU cooler. Do not attempt to use it for processor cooling. Confirm your SSD is the 2280 form factor, as other sizes like 2242 or 2230 will not fit the heatsink's base dimensions.
Design and build details
The heatsink uses a copper base with a graphene coating. Copper offers reliable thermal conductivity, while the graphene layer aims to spread heat more efficiently across the surface. This material choice targets users who need steady passive cooling for high-performance NVMe drives. The listing states graphene has high thermal conductivity, which helps move heat away from the SSD faster than standard metals alone. You get a solid, dense block of metal rather than a lightweight aluminum alternative.
Its dimensions are 70x20x1.5mm, and it weighs 1.59 ounces. This low profile makes it suitable for laptops and narrow spaces where bulkier coolers will not fit. The slanted slot design is listed as aesthetic, but it also increases the surface area exposed to air. More surface area allows for better heat exchange during passive dissipation. The adhesive thermal pad mounts the unit directly to the SSD. This tool-free installation simplifies the process, though you must remove the blue protective layer before use to ensure proper contact.
The product is designed for 2280 size M.2 NVMe SSDs. It fits drives like the SN750 and 970 EVO. The compact footprint ensures it does not interfere with nearby components on the motherboard. You can install it on PS5 consoles or laptop PCs without worrying about clearance issues. The design prioritizes a slim profile and direct contact over complex fan-based active cooling systems.
Setup and everyday use guide
Installation relies entirely on the included adhesive thermal pad. This mounting type allows you to fix the radiator on the SSD easily without any tools. The process is straightforward, but you must remove the blue protective layer on the back of the radiator before use. Skipping this step blocks heat transfer.
The heatsink fits 2280 size M.2 NVMe SSDs, which measure 22x80mm. It is compatible with devices like the PS5 and Laptop PCs. The dimensions are 70x20x1.5mm. This thin profile makes it suitable for laptops and some narrow spaces where larger coolers do not fit. The slanted slot design is intended to provide a more aesthetically pleasing installation display.
In daily use, the unit relies on passive cooling. It does not have fans. The professional air duct design increases the contact area with air for heat exchange. This aims to dissipate heat more quickly than a bare drive. You can use temperature software to test the temperature before and after installation. The listing claims the graphene coating, with a stated thermal conductivity of 5300W/m·K, makes it more efficient than other radiators. Pure copper conducts at 386.4W/m·K. Aluminum conducts at 237.2W/m·K. These figures suggest faster heat spreading. The product is designed for steady thermal management in confined environments. It works with standard NVMe drives such as the SN750, 850 EVO, and 970 EVO series.
Before You Buy This Heatsink
This passive cooler requires airflow to work. You must ensure your PS5, laptop, or PC case has adequate air movement over the M.2 slot. Stagnant air will reduce its effectiveness significantly. The 1.5mm thickness makes it suitable for tight spaces, but verify clearance with nearby components like RAM or motherboard VRMs. If you need more height, a 4.0mm variant is available. Keep the graphene coating clean from dust to maintain thermal efficiency. Since it relies on adhesive, ensure the SSD surface is flat and clean for proper bonding. This unit complements active air coolers by handling storage thermal management separately. It does not replace CPU cooling. Check your NVMe drive’s heat output. High-performance drives generate more heat and benefit more from this solution. If your drive runs cool, this may be overkill. Always remove the blue protective film before application. Proper installation ensures the thermal pad contacts the SSD evenly.
Check before you buy
- Verify clearance with nearby RAM or motherboard components
- Ensure case airflow reaches the M.2 slot directly
- Confirm SSD fits the 2280 form factor exactly
- Check if a thicker 4.0mm option is needed
- Remove blue protective film before applying adhesive pad
The product at a glance
Icepc 1.5mm Graphene Copper M.2 Heatsink
Best for: tight clearance PS5 and laptop M.2 cooling
- Material
- Copper with graphene coating
- Compatible Device
- M.2 2280 NVMe SSD, PS5, Laptop PC
- Dimensions
- 70x20x1.5mm
- Mounting Type
- Adhesive thermal pad
- Weight
- 1.59 ounces
View on Amazon: Icepc 1.5mm Graphene Copper M.2 Heatsink Affiliate link
This Icepc heatsink uses a copper base with a graphene coating to transfer heat from your M.2 NVMe SSD. It measures 70x20x1.5mm and attaches via an adhesive thermal pad. The design targets 2280 size drives in PS5 consoles, laptops, and narrow spaces. You get a low-profile solution that relies on air duct design for cooling rather than a fan.
Pros
- Copper material with graphene coating for high thermal conductivity
- Low 1.5mm height fits tight spaces
- Adhesive pad allows tool-free installation
- Compatible with PS5 and 2280 NVMe SSDs
Cons
- Passive design lacks an active fan
- Adhesive mount may leave residue on the SSD
- Only covers the top surface of the drive
Good fit if
- You need a low-profile heatsink for a PS5
- You have a laptop with limited clearance
- You want a passive cooling solution for an M.2 drive
Skip if
- You require active fan cooling for extreme loads
- You have a 2211 or 2242 size SSD
- You prefer a heatsink with a clip-on mounting mechanism
Verdict: Icepc 1.5mm Graphene Copper M.2 Heatsink is a compact passive cooler for users with tight space constraints in PS5s or laptops. It suits those who need a simple, adhesive-mounted solution for 2280 NVMe drives.
Specifications side by side
| Spec | Icepc 1.5mm Graphene Copper M.2 Heatsink |
|---|---|
| Material | Copper with graphene coating |
| Compatible Device | M.2 2280 NVMe SSD, PS5, Laptop PC |
| Dimensions | 70x20x1.5mm |
| Mounting Type | Adhesive thermal pad |
| Weight | 1.59 ounces |
| Size | 70x20x1.5mm |
| Model | ICEPC0016-1.5 |
Frequently asked questions
Is the Icepc heatsink compatible with PS5?
Yes, the product data lists PS5 as a compatible device. Its 1.5mm thickness allows it to fit within the tight clearances often found in console M.2 slots. This makes it a suitable option for users looking to cool internal drives without modifying the hardware structure.
What are the exact dimensions of this M.2 cooler?
The heatsink measures 70x20x1.5mm. In inches, this translates to 2.76 inches in length, 0.79 inches in width, and 0.06 inches in height. These compact dimensions are designed to accommodate standard 2280 NVMe SSDs while maintaining a low profile for confined spaces.
Does this cooler use active fans or passive cooling?
This is a passive cooling solution. It relies on the thermal conductivity of its copper base and graphene coating to dissipate heat. It does not include any fans or active components, meaning it requires adequate airflow from your system to function effectively.
How heavy is the Icepc M.2 heatsink?
The unit weighs 1.59 ounces. This light weight is typical for small, passive aluminum or copper heatsinks. It adds minimal mass to your storage drive, ensuring it does not strain mounting points or interfere with other components in tight laptop or console enclosures.
Can I install this on a laptop M.2 slot?
Yes, the specifications list laptops as a compatible device. The 1.5mm height is particularly useful for laptops where internal clearance is limited. It allows you to install the cooler without risking contact with the motherboard or other nearby components due to its low profile.
What material is the base of this heatsink made of?
The base is made of copper with a graphene coating. Copper is chosen for its reliable heat transfer properties. The graphene layer aims to spread heat more efficiently across the surface, helping to move thermal energy away from the SSD chip faster than standard metals alone.