Icepc mSATA SSD Pure Copper or Icepc 1.5mm Graphene Copper M.2? Which Icepc Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This icepc msata SSD pure copper vs m 2 heatsink ps5 pci e comparison helps you choose the right cooling solution. Both products use adhesive mounting for tool-free installation on compatible drives. The main difference lies in their form factor and target hardware. One model is designed for older mSATA drives, while the other fits modern M.2 NVMe SSDs and PS5 consoles. Selecting the correct size ensures proper heat dissipation for your specific storage device.
Key differences
| Aspect | Icepc Pure Copper Heatsink for 50x30mm mSATA SSD | Icepc 1.5mm Graphene Copper M.2 Heatsink |
|---|---|---|
| Compatible Device | 50x30mm mSATA SSD | M.2 2280 NVMe SSD, PS5, Laptop |
| Material | Pure copper | Copper with graphene coating |
| Dimensions | 40x26x4mm | 70x20x1.5mm |
| Weight | 0.63 ounces | 1.59 ounces |
Which one should you choose?
Choose Icepc Pure Copper Heatsink for 50x30mm mSATA SSD if
- You have a 50x30mm mSATA SSD that needs cooling
- You prefer a thicker heatsink for potentially greater surface area
- You want a lighter cooling solution for your drive
Choose Icepc 1.5mm Graphene Copper M.2 Heatsink if
- You are installing an M.2 2280 NVMe SSD in a PC or PS5
- You want the added thermal conductivity claims of a graphene coating
- You need a low-profile 1.5mm heatsink for narrow spaces
Verdict: Choose the Pure Copper model if you are cooling legacy mSATA drives. Select the Graphene M.2 heatsink for modern 2280 NVMe SSDs or PS5 expansion slots. Matching the physical dimensions to your specific drive type is the most critical factor for successful installation.
Pure Copper vs Graphene Heatsink
compatible device
You must match the heatsink to your drive form factor. The Icepc Pure Copper Heatsink is designed strictly for 50x30mm mSATA SSDs. It fits specific models like the PM830 and SL700. The Icepc Graphene Copper M.2 Heatsink targets 2280 size M.2 NVMe SSDs. It lists compatibility with drives such as the SN750, 970 EVO, and PM981. It also supports PS5 consoles and laptops. These products serve different hardware standards. You cannot use the mSATA cooler on an M.2 drive. You cannot use the M.2 cooler on an mSATA drive. Choose based on your slot type.
material
Thermal conductivity depends on the base material. The Icepc Pure Copper Heatsink uses pure copper. The data lists its thermal conductivity at 401W/mk. This is higher than standard aluminum. The Icepc Graphene Copper M.2 Heatsink uses copper with a graphene coating. The manufacturer states graphene reaches 5300W/m·K. Pure copper is listed at 386.4W/m·K in this context. The graphene layer offers a significantly higher theoretical conductivity rating. This suggests faster heat transfer from the SSD to the sink. The pure copper model relies solely on the metal base. Graphene provides an additional conductive advantage.
dimensions
Physical size determines fit in your system. The Icepc Pure Copper Heatsink measures 40x26x4mm. It is 1.57 inches long and 0.16 inches high. The Icepc Graphene Copper M.2 Heatsink measures 70x20x1.5mm. It is 2.76 inches long and only 0.06 inches high. The M.2 cooler is much longer but significantly thinner. The mSATA cooler is wider and thicker. The M.2 model is suitable for narrow spaces like laptops. The mSATA model is bulkier. You need clearance for the 4mm height on the mSATA unit. The 1.5mm height on the M.2 unit is low profile.
design
Heat dissipation relies on surface area and airflow. The Icepc Pure Copper Heatsink features a broken groove design. This increases the heat dissipation area for faster heat exchange with air. The manufacturer claims a 10°C to 25°C cooling effect. The Icepc Graphene Copper M.2 Heatsink uses a slanted slot design. This provides a more aesthetically pleasing look. It also increases contact area with air. Both designs aim to maximize heat exchange. The broken grooves on the mSATA model are functional. The slanted slots on the M.2 model are functional and visual. Both utilize adhesive backing for secure attachment.
weight
Weight affects the stress on the SSD and mounting. The Icepc Pure Copper Heatsink weighs 0.63 ounces. It is a compact, lightweight solution. The Icepc Graphene Copper M.2 Heatsink weighs 1.59 ounces. It is more than twice as heavy as the mSATA model. The heavier M.2 cooler may require a more robust adhesive bond. The lighter mSATA cooler places less physical load on the drive. Both use adhesive mounting. The difference in mass is notable. You should ensure the adhesive can support the 1.59-ounce weight on the M.2 drive. The 0.63-ounce weight is minimal.
Choose the right Icepc heatsink
Owner of a 50x30mm mSATA drive
This model is built specifically for 50x30mm mSATA SSDs. It uses pure copper with 401W/mk conductivity. The 40x26x4mm size fits these smaller drives perfectly. You get a tool-free adhesive mount. The broken groove design increases surface area for faster heat exchange. This ensures your older mSATA drive runs cooler and more smoothly.
User with a standard M.2 2280 SSD
This heatsink is designed for 2280 M.2 NVMe SSDs. It features a graphene coating on copper for high thermal efficiency. The 70x20x1.5mm profile suits laptops and PS5 consoles. The slanted slot design improves aesthetics and airflow. You get a secure adhesive thermal pad for easy installation. It fits popular drives like the SN750 and 970 EVO.
PS5 or laptop owner seeking low profile
This option is ideal for narrow spaces like PS5 slots or laptops. The 1.5mm height ensures it fits without clearance issues. The graphene coating enhances heat dissipation beyond standard copper. It supports various M.2 2280 drives. The adhesive pad provides stable mounting. You benefit from professional air duct design for quick heat removal in tight enclosures.
The products compared
Icepc Pure Copper Heatsink for 50x30mm mSATA SSD
Best for: 50x30mm mSATA SSD cooling
- Material
- Pure copper
- Compatible Device
- 50x30mm mSATA SSD
- Dimensions
- 40x26x4mm
- Mounting Type
- Adhesive backing
- Weight
- 0.63 ounces
View on Amazon: Icepc Pure Copper Heatsink for 50x30mm mSATA SSD Affiliate link
This Icepc heatsink is designed for 50x30mm mSATA SSDs. It uses pure copper for thermal conductivity of 401W/mk, which is higher than aluminum. The broken groove design increases the surface area for faster heat exchange. It measures 40x26x4mm and attaches via adhesive backing. You get a 10°C to 25°C cooling effect depending on your environment. It is a simple, tool-free solution for cooling specific legacy drives.
Pros
- Pure copper material with 401W/mk thermal conductivity
- Broken groove design increases heat dissipation area
- Tool-free installation with high-performance adhesive backing
- Specific fit for 50x30mm mSATA SSDs
Cons
- Limited to 50x30mm mSATA SSDs only
- Adhesive mounting may not suit all use cases
- Cooling effect varies by environment
Good fit if
- You have a 50x30mm mSATA SSD
- You want pure copper for better heat transfer
- You prefer tool-free adhesive installation
Skip if
- You use M.2 NVMe or other SSD sizes
- You need a heatsink for PS5 storage
- You require a fan for active cooling
Verdict: Icepc Pure Copper mSATA Heatsink is the right pick if you need to cool a 50x30mm mSATA drive with passive copper conduction. It fits users who want a simple, adhesive-mounted solution for legacy SSDs.
Icepc 1.5mm Graphene Copper M.2 Heatsink
Best for: Slim passive cooling for PS5 and laptops
- Material
- Copper with graphene coating
- Compatible Device
- M.2 2280 NVMe SSD, PS5, Laptop PC
- Dimensions
- 70x20x1.5mm
- Mounting Type
- Adhesive thermal pad
- Weight
- 1.59 ounces
View on Amazon: Icepc 1.5mm Graphene Copper M.2 Heatsink Affiliate link
This Icepc heatsink uses a copper base with a graphene coating to manage NVMe SSD temperatures. It measures 70x20x1.5mm and fits standard 2280 M.2 drives. The adhesive thermal pad allows for tool-free installation. Its slanted slot design improves airflow and aesthetics. This unit suits users who need a low-profile solution for laptops or PS5 consoles.
Pros
- Copper base with graphene coating for high thermal conductivity
- Low 1.5mm height profile fits narrow spaces
- Adhesive thermal pad enables easy tool-free mounting
- Slanted slot design improves airflow and looks
Cons
- Graphene coating may wear over time
- Adhesive pad leaves residue if removed
- No active fan for forced cooling
Good fit if
- You need a low-profile heatsink for a PS5
- You want a passive cooling solution for a laptop
- You prefer tool-free installation on M.2 drives
Skip if
- You require active fan cooling for extreme loads
- You have a thick case with no clearance
- You need a heatsink for 2230 or 2242 drives
Verdict: Icepc Graphene Copper M.2 Heatsink offers a slim, passive cooling option for standard NVMe drives. It fits well in tight spaces like laptops and PS5 consoles where active fans do not fit.
Specifications side by side
| Spec | Icepc Pure Copper Heatsink for 50x30mm mSATA SSD | Icepc 1.5mm Graphene Copper M.2 Heatsink |
|---|---|---|
| Material | Pure copper | Copper with graphene coating |
| Compatible Device | 50x30mm mSATA SSD | M.2 2280 NVMe SSD, PS5, Laptop PC |
| Dimensions | 40x26x4mm | 70x20x1.5mm |
| Mounting Type | Adhesive backing | Adhesive thermal pad |
| Weight | 0.63 ounces | 1.59 ounces |
| Size | 40x26x4mm | 70x20x1.5mm |
| Model | ICEPC0002-4 | ICEPC0016-1.5 |
Frequently asked questions
Does the Icepc Pure Copper heatsink fit M.2 NVMe drives?
No. This model is designed strictly for 50x30mm mSATA SSDs. It has a specific size of 40x26x4mm to match those smaller legacy drives. You cannot use it on standard M.2 NVMe modules. You must check your drive form factor before buying.
Is the Graphene Copper heatsink suitable for PS5 consoles?
Yes. This model is listed as compatible with PS5 consoles. Its slim 1.5mm profile allows it to fit in tight spaces where active fans do not fit. It provides passive cooling for standard NVMe drives in your console without adding bulk.
What is the thickness of the Icepc M.2 heatsink?
The Icepc 1.5mm Graphene Copper M.2 Heatsink is 1.5mm thick. This slim design makes it ideal for laptops and PS5 consoles. The height is listed as 0.06 inches. You get passive cooling without interfering with other components in tight enclosures.
How heavy is the Pure Copper mSATA heatsink?
The Icepc Pure Copper Heatsink for mSATA SSD weighs 0.63 ounces. It measures 40x26x4mm with dimensions of 1.57 inches in length. The lightweight copper construction helps dissipate heat effectively while remaining easy to mount on small legacy SSDs using adhesive.
Can I use the Pure Copper heatsink on a laptop M.2 slot?
No. That model is built for 50x30mm mSATA SSDs, not M.2 slots. Laptops typically use M.2 NVMe drives. You should use the Icepc 1.5mm Graphene Copper M.2 Heatsink instead. It is designed for standard NVMe drives and fits laptop form factors.
Does the Graphene Copper heatsink come with a fan?
No. This is a passive cooling solution. It relies on the copper material to dissipate heat without moving parts. The product is designed for environments where active fans do not fit, such as slim laptops and PS5 consoles. It uses adhesive mounting only.
What material is the Icepc Pure Copper heatsink made of?
It is made of pure copper. The product name and attributes confirm this material choice. Copper offers high thermal conductivity for efficient heat transfer. This model is specifically engineered for 50x30mm mSATA SSDs to maintain optimal operating temperatures through passive conduction.