Icepc 1.5mm Graphene Copper M.2 vs Icepc 2280 M.2 Graphene Coated (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This icepc m 2 heatsink ps5 pci e vs m 2 pcie nvme 2280 comparison looks at two copper options for 2280 M.2 NVMe drives. Both units use graphene-coated copper to boost thermal conductivity and include adhesive pads for tool-free installation. They target laptops, PCs, and PS5 consoles. The main difference lies in their physical profile. One is a slim 1.5mm design, while the other is a taller 0.31-inch full-cover heatsink. You need to choose based on your available clearance.
Key differences
| Aspect | Icepc 1.5mm Graphene Copper M.2 Heatsink | Icepc 2280 M.2 Graphene Coated Copper Heatsink |
|---|---|---|
| Dimensions | 70x20x1.5mm (2.76x0.79x0.06 inches) | 2.76x0.91x0.31 inches |
| Height | 0.06 inches | 0.31 inches |
| Mounting Pad Material | Adhesive thermal pad | Silicone thermal pad |
| Model | ICEPC0016-1.5 | ICEPC0026-B |
| Color | Not listed | Black |
Which one should you choose?
Choose Icepc 1.5mm Graphene Copper M.2 Heatsink if
- You have very limited vertical clearance inside a laptop or PS5 drive bay.
- You prefer a minimal profile that sits closer to the motherboard.
- You want the lighter unit at 1.59 ounces.
Choose Icepc 2280 M.2 Graphene Coated Copper Heatsink if
- You need a full-cover design that extends over more of the SSD surface.
- You want a thicker heatsink with more mass for heat absorption.
- You prefer a black finish for aesthetic consistency.
Verdict: Choose the 1.5mm model if your system has tight space constraints around the M.2 slot. Pick the 0.31-inch model if you have the room and want a larger surface area for heat dissipation. Both use the same copper and graphene materials for effective cooling.
Heatsink Dimensions and Fit
Physical Height
The Icepc 1.5mm Graphene Copper M.2 Heatsink measures 0.06 inches in height. This low profile makes it suitable for tight spaces, such as laptops or PS5 slots with limited clearance. In contrast, the Icepc 2280 M.2 Graphene Coated Copper Heatsink is significantly taller at 0.31 inches. This increased height allows for more material to absorb and dissipate heat. You must check your system's clearance before choosing the taller option. The lower unit offers better compatibility for constrained enclosures where vertical space is restricted.
Width Coverage
Coverage of the SSD surface affects cooling efficiency. The Icepc 1.5mm Graphene Copper M.2 Heatsink has a width of 0.79 inches. This covers the standard M.2 drive width but leaves some edge area exposed. The Icepc 2280 M.2 Graphene Coated Copper Heatsink is wider at 0.91 inches. This broader footprint provides more surface area for heat exchange. A wider heatsink can potentially manage heat from larger NAND chips more effectively. If maximum surface coverage is your priority, the wider model provides a clear advantage for full-board contact.
Thermal Pad Material
Both products use adhesive pads to secure the heatsink to the SSD without tools. The Icepc 1.5mm Graphene Copper M.2 Heatsink uses an adhesive thermal pad. This standard material transfers heat from the drive to the copper base. The Icepc 2280 M.2 Graphene Coated Copper Heatsink specifies an ilicone thermal pad. Ilicone is a brand of silicone thermal interface material known for durability and consistent thermal conductivity. Silicone pads often maintain their properties better over time than generic adhesives. This specific material choice gives the second product a slight edge in interface quality.
Weight
Weight can impact stress on the M.2 slot or SSD PCB. The Icepc 1.5mm Graphene Copper M.2 Heatsink weighs 1.59 ounces. This lighter mass puts less downward pressure on the drive. The Icepc 2280 M.2 Graphene Coated Copper Heatsink weighs 1.75 ounces. The additional 0.16 ounces comes from the extra copper volume in the taller and wider design. While the difference is small, the lighter option is easier to handle and places minimal mechanical stress on the connector. For sensitive laptop slots, the lighter unit is preferable.
Style Options
Aesthetics and airflow patterns differ between the two models. The Icepc 1.5mm Graphene Copper M.2 Heatsink features a slanted slot design for a clean look. It is available in two height variations: 0.06 inches and 0.16 inches. This allows you to choose based on clearance needs. The Icepc 2280 M.2 Graphene Coated Copper Heatsink comes in Stripe or Grid styles. These patterns may influence airflow direction slightly. The first product offers more variation in height for fitting different chassis depths, giving it an edge in customization options.
Which Heatsink Fits Your Needs
User with tight clearance in laptop or PS5
The Icepc 1.5mm Graphene Copper M.2 Heatsink stands only 0.06 inches tall. This low profile ensures it fits in narrow spaces where other coolers might not. You get copper with graphene coating for efficient heat transfer. The adhesive thermal pad allows for easy, tool-free installation on your 2280 NVMe SSD without risking damage to surrounding components.
User seeking maximum surface area for cooling
The Icepc 2280 M.2 Graphene Coated Copper Heatsink is 0.31 inches high. This greater height provides more material to absorb and dissipate heat from your drive. It features a full-cover design with a silicone thermal pad to protect SSD particles. The increased mass and surface area help maintain lower temperatures during intensive data transfers or gaming sessions.
User wanting aesthetic slanted slot design
Both products offer a slanted slot design for visual appeal. However, the Icepc 2280 M.2 Graphene Coated Copper Heatsink comes in Stripe or Grid styles. This allows you to choose a look that matches your build. The copper construction with graphene coating ensures performance remains high while adding a professional aesthetic to your internal hardware setup.
The products compared
Icepc 1.5mm Graphene Copper M.2 Heatsink
Best for: low-profile PS5 and laptop SSD cooling
- Material
- Copper with graphene coating
- Compatible Device
- M.2 2280 NVMe SSD, PS5, Laptop PC
- Dimensions
- 70x20x1.5mm
- Mounting Type
- Adhesive thermal pad
- Weight
- 1.59 ounces
View on Amazon: Icepc 1.5mm Graphene Copper M.2 Heatsink Affiliate link
This Icepc heatsink uses a copper base with a graphene coating to manage heat for 2280 NVMe SSDs. It measures 70x20x1.5mm and mounts via an adhesive thermal pad. The design includes slanted slots to increase air contact area. It fits PS5 consoles, laptops, and narrow spaces. The low profile suits systems with limited clearance.
Pros
- Graphene coating claims high thermal conductivity
- Thin 1.5mm height for tight spaces
- Adhesive pad allows tool-free installation
- Slanted slot design improves airflow
Cons
- Very low 1.5mm profile limits heat dissipation surface
- Adhesive mounting may leave residue on SSD
- Graphene coating durability is not specified
Good fit if
- You need a low-profile heatsink for a PS5
- You have a laptop with limited SSD clearance
- You want tool-free installation for a 2280 NVMe SSD
Skip if
- You require a tall heatsink for maximum cooling
- You prefer screw-mounted stability over adhesive
- You use an M.2 SSD larger than 2280 size
Verdict: Icepc 1.5mm Graphene Copper M.2 Heatsink fits users with tight clearance who need a simple, low-profile solution for their PS5 or laptop SSD.
Icepc 2280 M.2 Graphene Coated Copper Heatsink
Best for: compact M.2 SSD cooling in PS5 and laptops
- Material
- Copper
- Compatible Device
- M.2 NVMe SSD, PS5, Laptop, PC
- Dimensions
- 2.76 x 0.91 x 0.31 inches
- Weight
- 1.75 ounces
View on Amazon: Icepc 2280 M.2 Graphene Coated Copper Heatsink Affiliate link
This Icepc heatsink uses a full copper base with graphene coating for your M.2 NVMe 2280 SSD. Measuring 2.76 by 0.91 by 0.31 inches, it fits narrow spaces like laptops and PS5 consoles. The design includes slanted slots for airflow and uses an iilicone thermal pad for tool-free installation. It targets users needing efficient heat dissipation in compact builds.
Pros
- Full copper construction for high thermal conductivity
- Graphene coating enhances heat transfer efficiency
- Compact 0.31-inch height fits narrow spaces
- Tool-free installation via iilicone thermal pad
Cons
- Only available in 0.31-inch height
- Single style option per variation
- No included mounting screws
Good fit if
- You use a PS5 or laptop with limited clearance
- You want a copper heatsink with graphene coating
- You prefer tool-free SSD installation
Skip if
- You need a taller heatsink for better airflow
- You require multiple style options
- You already have a pre-installed thermal solution
Verdict: Icepc 2280 Graphene Copper Heatsink suits users with tight space constraints who want a copper and graphene solution for their M.2 SSD. It is a practical fit for PS5 and laptop owners who value compact dimensions and easy installation.
Specifications side by side
| Spec | Icepc 1.5mm Graphene Copper M.2 Heatsink | Icepc 2280 M.2 Graphene Coated Copper Heatsink |
|---|---|---|
| Material | Copper with graphene coating | Copper |
| Compatible Device | M.2 2280 NVMe SSD, PS5, Laptop PC | M.2 NVMe SSD, PS5, Laptop, PC |
| Dimensions | 70x20x1.5mm | 2.76 x 0.91 x 0.31 inches |
| Mounting Type | Adhesive thermal pad | not stated |
| Weight | 1.59 ounces | 1.75 ounces |
| Size | 70x20x1.5mm | not stated |
| Model | ICEPC0016-1.5 | ICEPC0026-B |
| Color | not stated | Black |
Frequently asked questions
Does the Icepc 1.5mm Graphene Copper M.2 Heatsink fit in a PS5?
Yes, this heatsink is compatible with the PS5. It features a very low profile, measuring only 0.06 inches in height. This slim design allows it to fit within the tight clearance of PS5 SSD slots without interfering with other components. You can install it directly on your M.2 drive for effective cooling.
What is the weight difference between the two Icepc M.2 coolers?
The Icepc 1.5mm model weighs 1.59 ounces, while the Icepc 2280 Graphene Coated version weighs 1.75 ounces. The standard 2280 model is slightly heavier due to its increased height and surface area. Both units remain lightweight, ensuring they do not add significant stress to your M.2 SSD or motherboard slot during use.
Are both heatsinks made of copper?
Yes, both the Icepc 1.5mm and the Icepc 2280 Graphene Coated heatsinks are constructed from copper. Copper provides high thermal conductivity to draw heat away from your NVMe drive. Both products also feature graphene coating to further enhance heat dissipation efficiency across the surface of the metal base.
Can I use the Icepc 1.5mm heatsink on a laptop?
Yes, the Icepc 1.5mm Graphene Copper M.2 Heatsink is designed for laptop compatibility. Its compact dimensions of 70x20x1.5mm and low height make it ideal for laptops with limited internal space. You can apply the adhesive pad to your M.2 SSD to secure it firmly in place without requiring additional mounting hardware.
What are the exact dimensions of the Icepc 2280 Graphene Coated heatsink?
The Icepc 2280 Graphene Coated Copper Heatsink measures 2.76 inches in length, 0.91 inches in width, and 0.31 inches in height. These dimensions align with the standard 2280 M.2 form factor. The black color and slightly taller profile provide more surface area compared to the ultra-thin 1.5mm variant.
Is the Icepc 2280 heatsink compatible with PS5 consoles?
Yes, the Icepc 2280 M.2 Graphene Coated Copper Heatsink is compatible with PS5 systems. It is designed to fit standard 2280 M.2 NVMe drives used in PS5 expansion slots. The copper and graphene construction helps manage thermal loads, making it a practical choice for maintaining optimal drive temperatures in your console.
How thick is the Icepc 1.5mm Graphene Copper M.2 Heatsink?
The Icepc 1.5mm Graphene Copper M.2 Heatsink is exactly 1.5mm thick, which translates to 0.06 inches. This minimal thickness is its defining feature, allowing it to fit in environments where space is extremely constrained. It is significantly thinner than the 0.31-inch tall Icepc 2280 model.