Best Heatsinks for M.2 SSD: 13 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Adding a dedicated heatsink for m2 SSD hardware prevents thermal throttling and sustains transfer speeds under heavy workloads. This guide compares 13 options strictly using the specifications published on their listings to highlight practical differences.
The GLOTRENDS 3mm Low-Profile M.2 SSD Heatsink earns the top spot because its slim 3mm height fits compact desktop and PS5 slots without clearance issues. Comparing these physical dimensions and thermal materials helps you decide which cooler matches your specific enclosure.
Quick picks
The best fit for you
- You need a low-profile heatsink for tight spaces GLOTRENDS 3mm Low-Profile M.2 SSD Heatsink Its 3mm height allows it to fit standard desktop and PS5 2280 slots without clearance issues.
- You need an ultra-thin heatsink for a laptop SGTKJSJS Copper M.2 2280 Laptop Heatsink Its 0.04-inch height and copper construction fit restricted laptop internal drive clearances.
- You want maximum passive cooling for a desktop build JEYI M.2 2280 Copper Fin SSD Cooler The design features 36 copper fins and a 0.47-inch height for open desktop slots.
- You want a dedicated heatsink cover for PS5 Sabrent PS5 M.2 NVMe Aluminum Heatsink The CNC aluminum body is engineered specifically to replace the PS5 console expansion door.
Our 13 picks
GLOTRENDS 3mm Low-Profile M.2 SSD Heatsink
Best for: desktop and PS5 2280 SSD installations
- Compatible Device
- M.2 SSD (what this guide is about)
- Material
- aluminum
- Cooling Method
- Passive
- Dimensions
- 22x70x3mm
- Mounting Type
- metal clasps, rubber bands
- Weight
- 0.71 ounces
This GLOTRENDS passive aluminum heatsink measures 3mm high and fits standard 2280 NVMe and SATA drives. It lowers peak temperatures by 5 to 20°C using passive cooling fins and a low-viscosity thermal pad. You get a tool-less mount using metal clasps or rubber bands. It suits desktop builds and PS5 consoles where clearance is tight, though it will not fit inside laptops.
Pros
- Low 3mm profile fits standard 2280 drives in PS5, PS5 Slim, and desktops
- Reduces peak controller temperatures by 5 to 20°C under sustained load
- Tool-less installation using included metal clasps or rubber bands
- Includes pre-cut low-viscosity thermal pad
Cons
- Not compatible with laptop M.2 slots
- Passive design lacks an active cooling fan
- Limited to 2280 length drives only
Good fit if
- You need a low-profile heatsink for a PS5, PS5 Slim, or desktop 2280 drive.
- You want tool-free installation using metal clasps or rubber bands.
- You want passive, noise-free cooling without power cables.
Skip if
- You need cooling for an M.2 SSD installed inside a laptop.
- You use an SSD form factor other than 2280, such as 2230 or 2242.
Verdict: GLOTRENDS 3mm Low-Profile M.2 2280 Heatsink provides reliable passive cooling and easy tool-less installation for tight desktop and PS5 slots. It is an efficient, silent thermal solution for any compatible 2280 drive outside of laptops.
Easycargo 100-Piece 15mm Copper Shim Kit
Best for: precise GPU and SSD gap clearance tuning
- Compatible Device
- GPU, Laptop, RAM, PS5, M.2 SSD, VRM (what this guide is about)
- Material
- Copper C1100
- Length
- 0.6 inches
- Width
- 0.6 inches
This kit contains 100 pure C1100 copper shims sized at 15mm by 15mm across 12 different thicknesses, ranging from 0.1mm up to 2.0mm. It features a thermal conductivity rating of 401W/mK. You get a direct thermal interface designed to bridge specific height gaps on M.2 NVMe drives, laptop GPUs, or VRAM chips. It suits you if you need exact clearance matching across varied component heights.
Pros
- Pure C1100 copper construction with 401W/mK thermal conductivity
- Includes 100 shims across 12 distinct thicknesses from 0.1mm to 2mm
- Compact 15mm by 15mm footprint fits M.2 SSDs, GPUs, and VRAM chips
- Available in variations with or without adhesive glue
Cons
- Square 15mm profile does not cover an entire 2280 M.2 drive body
- Provides only 3 pieces of the thickest 2mm size option
Good fit if
- You need precise copper shims to fill tight gaps on laptop GPUs or M.2 SSDs.
- You want high thermal conductivity material rated at 401W/mK.
- You build custom cooling setups requiring mixed thicknesses between 0.1mm and 2mm.
Skip if
- You want a single full-length heatsink cover for a 2280 M.2 SSD.
- You require large quantities of shims at 2mm thickness.
Verdict: Easycargo 15mm Copper Shim Kit provides a versatile 100-piece assortment of pure copper plates engineered to bridge exact clearance gaps. Its 401W/mK rating makes it a practical choice for tight GPU and M.2 thermal interfaces.
SGTKJSJS Copper M.2 2280 Laptop Heatsink
Best for: tight laptop M.2 2280 drive clearances
- Compatible Device
- Laptop, M.2 SSD (what this guide is about)
- Material
- 100% copper
- Mounting Type
- Rubber ring, insulation sticker
- Features
- Thermal Pad
- Length
- 3 inches
- Width
- 0.87 inches
This package gives you two 100% copper heatsinks designed for M.2 2280 solid-state drives. Each unit measures 3 inches long, 0.87 inches wide, and 0.04 inches thick, requiring a minimum installation clearance of 1.5 millimeters. It includes 0.5-millimeter and 1-millimeter silicone thermal pads alongside rubber rings and high-temperature insulation stickers. You will find this setup suits compact laptop compartments and desktop motherboards requiring low-profile cooling.
Pros
- Made of 100% cut and polished copper
- Requires only 1.5mm of installation height clearance
- Includes both 0.5mm and 1mm silicone thermal pads
- Contains two heatsinks in the package
Cons
- Secures with rubber rings or adhesive stickers instead of metal clips
- Only fits 2280 length M.2 drives
Good fit if
- You need a low-profile heatsink fitting tight 1.5mm laptop clearances.
- You want two pure copper heatsinks with multiple pad thicknesses included.
Skip if
- You use an M.2 SSD size other than form factor 2280.
- You prefer rigid screw-down or clip-on mounting brackets.
Verdict: SGTKJSJS Copper M.2 2280 Laptop Heatsink 2-Pack delivers ultra-slim copper cooling designed specifically for tight laptop clearances and standard 2280 drives. It provides flexible mounting hardware and two thermal pad thicknesses in a twin-pack configuration.
JEYI M.2 2280 Copper Fin SSD Cooler
Best for: Silent desktop M.2 2280 passive cooling
- Compatible Device
- M.2 SSD (what this guide is about)
- Material
- Copper, aluminum
- Cooling Method
- Passive
- Dimensions
- 2.83 x 0.94 x 0.47 inches
- Weight
- 1.76 ounces
This JEYI passive cooler is built for standard M.2 2280 NVMe solid-state drives in desktop computers. It features 36 copper fins paired with a CNC aluminum frame, delivering heat dissipation with 401 W/m·K thermal conductivity without fan noise. Standing 0.47 inches tall and 0.94 inches wide, it includes three thermal pads for installation. It suits you if you need silent cooling and have vertical clearance around your drive slot.
Pros
- 36 copper fins provide high surface area with 401 W/m·K thermal conductivity
- Completely passive operation with zero fan noise
- Precision CNC aluminum frame provides rigid structural support
- Includes three thermal pads for installation
Cons
- Height of 0.47 inches requires clearance check in tight desktop builds
- Designed specifically for 2280 drives, not shorter M.2 formats
Good fit if
- You use a standard M.2 2280 NVMe SSD in a desktop PC
- You want quiet passive cooling without moving parts
- You have at least 0.47 inches of vertical clearance around the slot
Skip if
- You need a low-profile heatsink for a laptop or restricted enclosure
- You use an M.2 drive in a format other than 2280
Verdict: JEYI Copper Fin M.2 2280 SSD Heatsink delivers silent passive heat dissipation through 36 copper fins and a sturdy aluminum frame. Its 0.47-inch profile fits desktop motherboards that provide clear vertical space.
Sabrent PS5 M.2 NVMe Aluminum Heatsink
Best for: PS5 console internal SSD expansion cooling
- Compatible Device
- PS5, M.2 SSD (what this guide is about)
- Material
- CNC'd aluminum
- Dimensions
- 5.85 x 3 x 0.46 inches
- Weight
- 2.82 ounces
You get a dedicated CNC aluminum heatsink engineered to replace the native PS5 console expansion slot cover. It measures 5.85 inches long, 3 inches wide, and 0.46 inches high. The unit uses a sandwich design to maintain even pressure across your M.2 SSD. It includes mounting screws and thermal tape. You should choose this model specifically for cooling an internal PS5 solid-state drive upgrade.
Pros
- Replaces native PS5 expansion slot door
- CNC machined aluminum body
- Includes thermal tape and mounting screws
- Sandwich design distributes contact pressure evenly
Cons
- Form factor fits PS5 consoles instead of standard PC slots
- Footprint measures 5.85 inches long and 3 inches wide
Good fit if
- You need an M.2 heatsink engineered specifically for the PS5 expansion slot.
- You want a cooling block that replaces the factory metal slot cover.
- You need mounting screws and thermal tape included in the package.
Skip if
- You want to cool an M.2 SSD on a standard PC motherboard.
- You need a compact heatsink to fit inside a laptop.
Verdict: SABRENT PS5 Aluminum M.2 Heatsink Cover replaces the factory expansion slot door with a direct-fit CNC aluminum cooler. It provides dedicated cooling hardware tailored strictly to PS5 console SSD installations.
GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe
Best for: PS5 storage expansion with heat pipe cooling
- Compatible Device
- PS5, M.2 SSD (what this guide is about)
- Material
- Copper, Aluminum
- Dimensions
- 5 x 2.59 x 0.55 inches
- Weight
- 3.18 ounces
View on Amazon: GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe
This replacement expansion cover provides cooling for your PS5 M.2 NVMe SSD. It combines an aluminum plate-fin heatsink with a direct-touch copper heat pipe to pull heat off the drive. You can install single- or double-sided drives across lengths from 2230 up to 22110. It includes two thermal pads rated at 4.8 W/m-k and 3.6 W/m-k, along with mounting screws and a screwdriver for complete setup inside your console.
Pros
- Direct-touch copper heat pipe integrated with an aluminum plate-fin heatsink
- Supports M.2 drive sizes 2230, 2242, 2260, 2280, and 22110 in single- and double-sided layouts
- Includes thermal pads rated at 4.8 W/m-k and 3.6 W/m-k plus a screwdriver and screws
Cons
- Shaped specifically for PlayStation 5 expansion slots rather than standard PC cases
- Overall height of 0.55 inches does not fit laptop drive slots
Good fit if
- You want an integrated replacement bay cover and heatsink for a PS5 console.
- You run single- or double-sided M.2 NVMe drives up to size 22110.
Skip if
- You need a universal heatsink for a laptop or desktop motherboard slot.
- You already have an SSD with a non-removable factory heatsink.
Verdict: GRAUGEAR PS5 M.2 SSD Heatsink Cover with Heat Pipe combines a direct-touch copper heat pipe with an aluminum fin structure built for the PlayStation 5 expansion slot. It delivers dedicated thermal hardware for single- and double-sided M.2 NVMe drives up to size 22110.
JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink
Best for: laptops and space-constrained M.2 SSD installations
- Compatible Device
- Laptop, PS5, M.2 SSD (what this guide is about)
- Material
- Pure Copper
- Dimensions
- 70x20x2mm
- Features
- Thermal Pad
- Weight
- 1.06 ounces
View on Amazon: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink
This JOYJOM cooler pairs a 2mm pure copper base with a graphite outer coating for 2280 form factor M.2 solid-state drives. Measuring 70 by 20 millimeters, its low-profile 0.08-inch height fits tight laptop drive bays alongside desktop computers and PS5 consoles. Included silicone grease thermal pads, high-temperature bandages, and rubber rings handle mounting without screws. If you need a compact copper thermal solution for slim clearance enclosures, this heatsink fits your setup.
Pros
- Pure copper core rated at 401 W/mK with graphite surface layer
- Slim 2mm thickness designed for tight laptop drive clearances
- Grooved surface pattern designed to increase heat dissipation area
- Includes silicone grease thermal pad, rubber rings, and high-temperature bandages
Cons
- Uses rubber rings and bandages rather than screw or clip mounting
- Graphite exterior layer may show underlying red copper
- Thin 2mm profile offers less mass than taller desktop heatsinks
Good fit if
- You need a low-profile heatsink for space-constrained laptop or PS5 bays.
- You want high-conductivity copper combined with soft silicone thermal padding.
Skip if
- You have clearance for thicker heatsinks in a standard desktop case.
- You prefer rigid metal screw or bracket mounting over rubber retention rings.
Verdict: JOYJOM 2mm Graphite-Coated Copper Heatsink provides high-conductivity copper cooling in an ultra-slim profile suitable for laptops and tight M.2 slots. It uses rubber rings and silicone padding for simple, low-clearance installation.
Awxlumv Copper Laptop M.2 2280 Heatsink
Best for: compact laptop and console 2280 M.2 slots
- Compatible Device
- Laptop, M.2 SSD (what this guide is about)
- Material
- 100% copper
- Mounting Type
- Mounting Screw
- Features
- Thermal Pad
- Length
- 2.95 inches
- Width
- 0.9 inches
This Awxlumv heatsink is a pure red copper plate designed for 2280 form factor M.2 drives in tight spaces. At just 0.02 inches thick, it fits inside laptops, desktops, and PlayStation 5 consoles. The red copper material delivers up to 401 W/(m·K) thermal conductivity, paired with included 0.5mm and 0.8mm nano thermal pads rated at 5 W/(m·K). You get mounting screws, a screwdriver, and a laptop sled for installation.
Pros
- Pure red copper build with 401 W/(m·K) thermal conductivity
- Ultra-slim 0.02-inch thickness fits tight laptop clearances
- Includes 0.5mm and 0.8mm 5 W/(m·K) nano thermal pads
- Comes with mounting screws, screwdriver, and laptop sled
Cons
- Only fits 2280 length M.2 drives
- Flat plate design lacks raised cooling fins
Good fit if
- You need a low-profile heatsink for a laptop or PlayStation 5
- You are installing a standard 2280 M.2 SSD
- You want included installation tools, screws, and multiple pad thicknesses
Skip if
- You use non-2280 form factor M.2 drives like 2230 or 2242
- You have ample desktop space for a thicker heatsink with tall fins
Verdict: Awxlumv Copper M.2 2280 SSD Heatsink delivers high thermal conductivity in an ultra-slim 0.02-inch profile suited for clearance-limited laptop and console slots. Its included dual-thickness pads and mounting hardware make it a straightforward choice for tight 2280 SSD installations.
ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack
Best for: multi-drive setups needing black aluminum heatsinks
- Compatible Device
- PS5, M.2 SSD (what this guide is about)
- Material
- Alloy aluminum
- Dimensions
- 22 x 80mm
- Mounting Type
- Metal clips + rubber bands
- Color
- Black
- Features
- Thermal Pad
This package provides four black aluminum heatsinks sized for standard 22 x 80 mm M.2 SSDs. Each heatsink features a grooved surface design to aid heat dissipation, paired with an included thermal silicone pad. You can secure each unit using either metal clips or rubber bands. It suits you if you need to cool multiple 2280 NVMe or SATA drives in desktop PCs or compatible consoles.
Pros
- Includes four aluminum heatsinks and four thermal silicone pads
- Dual mounting options using metal clips or rubber bands
- Grooved aluminum surface expands heat dissipation area
- Sized for standard 22 x 80 mm M.2 2280 form factors
Cons
- Only sized for 2280 drives rather than shorter M.2 formats
- Aluminum construction rather than solid copper
Good fit if
- You have multiple 2280 M.2 SSDs requiring passive cooling.
- You prefer black aluminum heatsinks with clip or rubber band mounting.
- You need low-profile heatsinks compatible with PS5 or desktop M.2 slots.
Skip if
- You need a heatsink for shorter drive formats like 2230 or 2242.
- You want pure copper thermal material instead of aluminum.
Verdict: ELUTENG 2280 Aluminum Heatsink 4-Pack provides a practical multi-drive cooling solution with versatile clip and band mounting hardware. It delivers straightforward aluminum heat dissipation for up to four 2280 SSDs.
Haojiaho Copper M.2 2280 SSD Heatsink
Best for: low-profile installations in laptops and compact enclosures
- Compatible Device
- M.2 SSD (what this guide is about)
- Material
- Pure copper
- Dimensions
- 67x18x4mm
- Mounting Type
- Rubber rings
- Features
- Thermal Pad
- Weight
- 1.01 ounces
This is a pure copper passive heatsink built for M.2 2280 SSDs. It measures 67 by 18 by 4 millimeters, weighs 0.063 pounds, and features grooved surface channels. Haojiaho includes a silicone thermal pad and rubber mounting rings. You get a low-profile 4-millimeter height that fits tight clearances in laptops, desktops, or consoles without blocking adjacent components.
Pros
- Pure copper construction with grooved surface for heat release
- Slim 4mm height fits tight internal clearances
- Includes silicone thermal pad and rubber mounting rings
Cons
- Uses rubber mounting rings rather than fixed metal screws
- Length is 67mm, leaving drive ends partially uncovered
Good fit if
- You need a slim 4mm cooler for compact spaces like laptops
- You want pure copper thermal conductivity over standard aluminum
Skip if
- You need full 80mm length coverage on your drive
- You prefer rigid metal bracket or screw-down mounting
Verdict: Haojiaho 4mm Pure Copper M.2 2280 SSD Heatsink delivers pure copper cooling in a compact 4mm profile secured by rubber rings. It suits tight enclosures where standard tall heatsinks will not fit.
Haojiaho 6mm Pure Copper M.2 2280 Heatsink
Best for: compact copper cooling in M.2 2280 slots
- Compatible Device
- Laptop, PS5, M.2 SSD (what this guide is about)
- Material
- Pure copper
- Dimensions
- 70 x 21 x 6 mm
- Features
- Thermal Pad
- Weight
- 1.64 ounces
The Haojiaho 6mm Pure Copper M.2 2280 Heatsink is a low-profile passive cooling block designed for standard 2280 NVMe solid-state drives. Made entirely from pure copper with a grooved surface, it measures 70 by 21 by 6 millimeters and includes a silicone thermal pad with mounting rubber rings. It suits you if you need a compact copper cooler for tight installations in laptops, desktop motherboards, or gaming consoles like the PS5.
Pros
- Pure copper construction provides higher thermal conductivity than aluminum
- Grooved surface structure expands heat dissipation surface area
- Includes a matching silicone thermal pad and rubber mounting rings
- Compatible with 2280 M.2 SSDs, laptops, PS5 consoles, and desktops
Cons
- Total 6mm height requires checking clearance in ultra-thin laptop bays
- Secured using rubber rings rather than metal clips or screws
- Sized specifically for 2280 drives without support for shorter M.2 formats
Good fit if
- You want a 100% pure copper heatsink for an M.2 2280 drive.
- You need a 6mm-tall cooler bundled with a thermal pad and retention rings.
- You plan to cool an SSD inside a laptop, desktop PC, or PS5.
Skip if
- You have an M.2 drive in a 2230, 2242, or 2260 form factor.
- You have less than 6mm of vertical clearance above your SSD slot.
- You prefer rigid screw-mounted or metal-bracket mounting mechanisms.
Verdict: Haojiaho 6mm Pure Copper M.2 2280 Heatsink delivers high-conductivity solid copper cooling in a compact 70x21x6mm form factor. It provides a straightforward thermal solution complete with thermal padding for laptops, desktops, and compatible consoles.
Haojiaho 0.5mm Slim Copper M.2 Heatsink
Best for: tight laptop and PS5 SSD clearances
- Compatible Device
- Laptop, M.2 SSD (what this guide is about)
- Material
- Pure copper
- Dimensions
- 75 x 23 x 0.5 mm
- Length
- 2.95 inches
- Width
- 0.91 inches
This Haojiaho heatsink is a 0.5-millimeter slim copper plate made for 2280 M.2 SSDs. Its pure copper construction conducts heat away from your drive, while its 75 by 23 millimeter profile fits inside tight spaces. The kit includes ten silicone thermal pads, two mounting screws, a screwdriver, and a spudger. It suits you if you need low-profile cooling for laptop drives, desktop motherboards, or PlayStation 5 storage slots.
Pros
- 0.5 mm ultra-thin profile fits tight enclosures
- Pure copper material for thermal transfer
- Includes 10 silicone thermal pads, mounting screws, and tools
- Compatible with 2280 M.2 SSDs in laptops, desktops, and PS5
Cons
- Flat plate design lacks fins for expanded surface area
- Thin 0.5 mm thickness provides less thermal mass than tall heatsinks
Good fit if
- You need an ultra-thin 0.5 mm copper cooler for compact laptop or PS5 slots.
- You want an all-in-one kit bundled with extra thermal pads, screws, and tools.
Skip if
- You have clearance for a taller heatsink with finned heat dissipation.
- You use an SSD form factor that is not supported by 2280 dimensions.
Verdict: Haojiaho 0.5mm Slim Copper M.2 Heatsink delivers a pure copper heat spreader designed specifically for installations with minimal clearance. It supplies all required installation tools and thermal pads for laptop, desktop, and PS5 drive bays.
GOWENIC 2280 M.2 Graphene Copper Heatsink 2-Pack
Best for: low-clearance laptop 2280 M.2 SSD installations
- Compatible Device
- Laptop, M.2 SSD (what this guide is about)
- Material
- graphene, copper foil
View on Amazon: GOWENIC 2280 M.2 Graphene Copper Heatsink 2-Pack
This package includes two slim, flexible heatsinks tailored for 2280 M.2 SSDs. Each unit uses a dual-layer build featuring graphene on one side paired with copper foil on the other. You install each cooler by peeling off the backing film directly onto the drive without screws or specialized tools. This layout suits you if you need compact, low-clearance cooling inside tight laptop chassis or restricted drive bays.
Pros
- Dual-layer design featuring graphene on one side and copper foil on the other
- Slim and flexible construction designed for tight laptop clearance
- Includes two heatsinks per package
- Tool-free installation with peel-off adhesive film
Cons
- Compatible only with 2280 form-factor M.2 drives
- Lacks rigid fins, clips, or screw-mounting hardware
Good fit if
- You need a low-profile heatsink for a 2280 M.2 SSD inside a laptop.
- You want a tool-free installation using peel-off film.
- You need two heatsinks for multiple drives or replacements.
Skip if
- You use an M.2 SSD size other than 2280.
- You prefer a thick, finned cooler with mechanical screw mounts.
Verdict: GOWENIC 2280 M.2 Graphene Copper Heatsink 2-Pack delivers an ultra-slim dual-layer thermal solution built for laptop drive bays. Its tool-free peel-off film and flexible copper-graphene construction offer straightforward installation where rigid heatsinks cannot fit.
Specifications side by side
| Spec | GLOTRENDS 3mm Low-Profile M.2 SSD Heatsink | Easycargo 100-Piece 15mm Copper Shim Kit | SGTKJSJS Copper M.2 2280 Laptop Heatsink | JEYI M.2 2280 Copper Fin SSD Cooler | Sabrent PS5 M.2 NVMe Aluminum Heatsink | GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe | JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink | Awxlumv Copper Laptop M.2 2280 Heatsink | ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack | Haojiaho Copper M.2 2280 SSD Heatsink | Haojiaho 6mm Pure Copper M.2 2280 Heatsink | Haojiaho 0.5mm Slim Copper M.2 Heatsink | GOWENIC 2280 M.2 Graphene Copper Heatsink 2-Pack |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | aluminum | Copper C1100 | 100% copper | Copper, aluminum | CNC'd aluminum | Copper, Aluminum | Pure Copper | 100% copper | Alloy aluminum | Pure copper | Pure copper | Pure copper | graphene, copper foil |
| Cooling Method | Passive | not specified | not specified | Passive | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Compatible Device | 2280 M.2 SSD | PC, Laptop GPU, CPU, M.2 NVMe SSD | M.2 2280 SSD | M.2 2280 NVMe SSD | PS5 console | PS5, M.2 NVMe SSD | M.2 2280 SSD, Laptop, PS5 | M.2 2280 SSD | M.2 2280 SSD | M.2 2280 SSD, PS5, Nintendo Switch | M.2 2280 SSD, PS5, Nintendo Switch | M.2 2280 SSD, PS5 | 2280 M.2 SSD, laptop |
| Dimensions | 22x70x3mm | not specified | not specified | 2.83 x 0.94 x 0.47 inches | 5.85 x 3 x 0.46 inches | 5 x 2.59 x 0.55 inches | 70x20x2mm | not specified | 22 x 80mm | 67x18x4mm | 70 x 21 x 6 mm | 75 x 23 x 0.5 mm | not specified |
| Mounting Type | metal clasps, rubber bands | not specified | Rubber ring, insulation sticker | not specified | not specified | not specified | not specified | Mounting Screw | Metal clips + rubber bands | Rubber rings | not specified | not specified | not specified |
| Color | 1-22 x 70 x 3 mm | Copper | Copper Heatsinks | not specified | PS5 HEATSINK | Silver | Black | not specified | Black | Copper | Copper | Copper | not specified |
| Features | not specified | not specified | Thermal Pad | not specified | not specified | not specified | Thermal Pad | Thermal Pad | Thermal Pad | Thermal Pad | Thermal Pad | not specified | not specified |
| Weight | 0.71 ounces | not specified | 2.89 ounces | 1.76 ounces | 2.82 ounces | 3.18 ounces | 1.06 ounces | 1.13 ounces | 2.47 ounces | 1.01 ounces | 1.64 ounces | not specified | not specified |
| Length | not specified | 0.6 inches | 3 inches | not specified | not specified | not specified | not specified | 2.95 inches | not specified | not specified | not specified | 2.95 inches | not specified |
| Width | not specified | 0.6 inches | 0.87 inches | not specified | not specified | not specified | not specified | 0.9 inches | not specified | not specified | not specified | 0.91 inches | not specified |
| Size | 3mm High | not specified | not specified | not specified | M.2 NVMe PS5 Heatsink | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Model | 22x70x3mm | ES-C100-1515 | m2-t2p | Q80 | SB-PSHS | G-PS5HS04 | 70x20x2mm | HC-M.2-1 | not specified | FG6718 | Thk. 6mm | 2280T | GOWENICpsq6wnirek |
You can also review the best m 2 SSD enclosures if you need to cool a drive in a case.
How to Choose the Right M.2 Heatsink
-
Check Thermal Material Conductivity
Consider whether copper or aluminum fits your thermal requirements before you buy. Pure copper delivers higher thermal conductivity, rated up to 401W/mK on parts like the Easycargo 100-Piece 15mm Copper Shim Kit. This material rapidly pulls heat away from drive controllers in confined enclosures. Aluminum options provide lightweight heat dissipation with lower bulk and weight, which prevents strain on horizontal motherboard slots. If your drive runs constant write cycles, choose solid copper. For standard desktop operating temperatures, basic aluminum spreaders provide adequate heat dispersion.
-
Evaluate Heat Pipe Additions
Inspect whether the heatsink relies purely on solid metal conduction or adds dedicated heat pipes. Standard metal plates absorb heat directly into a static mass. A direct-touch heat pipe, found on options like the GRAUGEAR PS5 SSD Heatsink Cover with Heat Pipe, rapidly carries thermal energy away from the drive surface into a fin array. This active phase-change transfer lowers peak controller temperatures under sustained read and write loads. Choose a heat pipe design if your drive faces heavy gaming workloads, provided your mounting slot has enough vertical space.
-
Verify Form Factor Length
Verify the exact physical length of your drive PCB before ordering mounting hardware. Most modern consumer NVMe drives use the standard 2280 form factor, measuring 80mm in length. However, enterprise drives or specialized expansion modules may use extended 22110 dimensions measuring 110mm long. Some heatsink enclosures accommodate sizes up to 22110, while standard blocks like the ELUTENG 2280 M.2 Aluminum Heatsink 4-Pack only cover 80mm drives. Always check your drive's model label to ensure the heatsink length covers the memory modules and the controller.
-
Review Included Thermal Pads
Review the thermal interface pads supplied in the box to ensure proper drive contact. Single-sided M.2 drives leave an air gap beneath the printed circuit board, while double-sided drives have memory chips on both surfaces. Solutions like the SGTKJSJS Copper M.2 2280 Laptop Heatsink supply multiple pad thicknesses to bridge variations between chips and metal plates. Uneven contact prevents heat from transferring properly into the metal sink. Check the included accessory specs to verify that you receive suitable pad thicknesses to match your drive's chip layout.
-
Check Enclosure Slot Integration
Look at how the heatsink integrates with your host machine's physical layout. Dedicated console coolers, such as the Sabrent PS5 M.2 NVMe Aluminum Heatsink, completely replace the factory metal expansion door to maximize internal airflow. Universal stick-on heatsinks mount directly to the drive PCB using silicone bands or clips, fitting generic PC motherboards instead. If you are upgrading a console, select a dedicated replacement bay cover. If you are building a custom desktop PC, choose a universal heatsink that leaves adjacent PCIe slots unobstructed.
Frequently asked questions
Do M.2 heatsinks support different SSD form factors?
Most models accommodate standard 2280 drives, but specific designs accommodate larger sizes. The GRAUGEAR PS5 cooler, for instance, supports single- and double-sided M.2 NVMe drives up to size 22110. Standard options like the SGTKJSJS and GLOTRENDS focus exclusively on the 80mm length. Always verify whether your drive length matches the bracket or heatsink length before mounting.
Do M.2 heatsinks include thermal pads for installation?
Many kits supply thermal pads to ensure direct contact with your drive components. Models like the Awxlumv and SGTKJSJS include dual-thickness thermal pads to accommodate component height variations on single-sided or double-sided SSDs. Others, such as the JOYJOM and Haojiaho models, include silicone padding. You use these pads to fill the gap between the drive surface and the heatsink.
Can you use a regular M.2 heatsink inside a PS5 console?
You can use standard low-profile heatsinks or dedicated console replacement covers. Units like the SABRENT PS5 heatsink and GRAUGEAR replace the console expansion slot door entirely with integrated aluminum structures. Alternatively, low-profile designs like the GLOTRENDS 3mm heatsink fit within the internal bay while keeping the factory cover in place. You must keep overall height within slot boundaries to close the console properly.
How do low-profile M.2 heatsinks attach to the drive?
Mounting methods depend on the specific cooler design and height profile. The GLOTRENDS 3mm model uses a tool-less attachment system, while ELUTENG supplies metal clips and bands for its aluminum plates. Slim copper models, such as those from JOYJOM and Haojiaho, rely on elastic rubber rings to hold the assembly together. Flexible options like GOWENIC utilize a peel-off adhesive film for direct attachment.
How do passive M.2 heatsinks dissipate drive heat?
Passive coolers rely on natural thermal radiation and ambient chassis airflow rather than integrated fans. Models like the JEYI Q80 feature 36 copper fins set inside an aluminum frame to maximize external surface area. Heat moves from the M.2 SSD controller and NAND chips through the thermal interface and dissipates across the metal fins without generating mechanical noise inside your desktop case.
Can you cool multiple M.2 drives using a single heatsink kit?
Multi-packs allow you to cool several solid-state drives simultaneously across your motherboard. The ELUTENG 4-pack provides enough separate aluminum heatsinks, clips, and pads to outfit four distinct 2280 drives. Similarly, SGTKJSJS and GOWENIC offer two-pack options for dual-drive configurations. These multi-packs ensure uniform mounting hardware and identical thermal dissipation components across all storage slots in your system.
What is the purpose of small copper shims for SSDs?
Copper shims bridge tiny physical gaps between individual drive components and existing chassis cooling plates. A multi-piece assortment like the Easycargo 100-piece kit provides 15mm square copper plates suited for spot placement over memory chips or controllers. You use these small shims when an integrated motherboard or laptop heatsink does not make flush contact with specific low-profile chips on your M.2 drive.