Akasa Low-Profile LGA1700 ITX CPU Cooler Review (2026): A Spec-Based Look

What stands out

• 29.92mm low-profile height for Mini-ITX and HTPC cases
• 73 TDP thermal design power rating
• Tool-free push-pin mounting for LGA1700 sockets
• Aluminum heatsink with copper core construction

Who it fits

Key specs explained for this cooler

Cooler Height: 29.92mm

This measurement tells you the physical space the cooler occupies above the CPU. At roughly 1.18 inches, it fits inside low-profile and small form factor cases where standard towers will not. You should check your case specifications for maximum cooler height before buying. This allows you to use a more powerful cooling solution in a Mini-ITX build without worrying about clearance issues with side panels or RAM slots.

TDP Rating: 73 TDP

This rating indicates the maximum thermal power the cooler is designed to dissipate. It suggests this unit is suitable for processors with a thermal design power up to 73 watts. You should compare this against the TDP of your specific CPU. If your processor exceeds this rating, you may need a larger tower cooler. This spec helps you determine if the cooler can handle the heat output of your chip under load.

Socket Compatibility: LGA1700

This specifies the exact motherboard socket type the cooler supports. It is designed for Intel LGA1700 platforms, including 12th, 13th, and 14th Gen Core processors. You must verify your motherboard uses this socket before purchasing. It ensures the mounting hardware will attach correctly. If you have an older LGA1200 board or an AMD socket, this cooler will not fit, so this spec is critical for compatibility checks.

Tower Design: Low-Profile

This describes the physical structure of the heatsink. A low-profile tower is shorter and more compact than a standard tower design. It is optimized for Small Form Factor builds where space is limited. You benefit from this design if you are building a cube, HTPC, or Mini-ITX system. It allows for better airflow in tight spaces but may offer less cooling capacity than larger towers due to reduced surface area.

Design and build analysis

The Akasa AK-CC6602HP01 uses a mixed-material approach for its heatsink. According to the listing, the unit combines an aluminum block with a copper core. This layout aims to balance heat spreading speed with overall thermal mass. The aluminum body keeps the weight down while the copper base handles direct contact with the processor. The finish is black, which helps it blend into most small form factor cases without drawing attention to the hardware.

Size is the defining constraint here. The cooler stands 29.92mm tall, which is roughly 1.18 inches. It measures 3.43 inches in length and 3.35 inches in width. This compact footprint ensures it does not interfere with nearby RAM modules or PCIe slots in tight Mini-ITX builds. The total weight is 9.03 ounces. This light mass reduces stress on the motherboard socket, a practical consideration for smaller boards that may lack reinforced CPU sockets.

Mounting relies on tool-free push-pin brackets designed for LGA1700. This system allows for quick installation and secure retention without needing additional screws or backplates. The design is optimized for low-profile environments, making it suitable for Cube, HTPC, and Mini-ITX cases. You should verify your case clearance before purchasing, as the 29.92mm height leaves minimal margin for error in extremely confined spaces.

Setup and everyday use guide

Installing this cooler on an LGA1700 motherboard involves the included push-pin mounting system. The listing describes this as tool-free, which suggests you can secure the unit without additional hardware or complex alignment steps. This method provides reliable retention for the lightweight assembly, which weighs 9.03 ounces. You simply align the pins with the motherboard holes and press until they lock into place. This approach minimizes the risk of stripping screws or misaligning the thermal pad.

Regarding compatibility, the cooler supports a range of desktop form factors. It works with ATX, Micro-ATX, and Mini-ITX motherboards, including Thin Mini-ITX variants. However, its 29.92mm height restricts where you can place it. You must ensure your case has sufficient vertical clearance above the CPU socket. This unit is intended for Small Form Factor systems, such as Cube or HTPC cases, where space is tight.

In daily use, the cooler is rated for up to 73 TDP. This limit applies to Intel Core processors. You should not expect it to handle high-end chips that exceed this thermal design power. The aluminum and copper construction helps dissipate heat efficiently within that constraint. The included fan operates at 74 PWM, allowing for speed adjustments based on your system’s thermal needs. This setup is practical for compact builds that prioritize fitment and moderate cooling performance over extreme overclocking potential.

Check Case Clearance And TDP

Before you buy the Akasa AK-CC6602HP01, you must verify your case clearance. Its 29.92mm height is strict. Standard RAM modules often exceed this limit. You should check your memory profile height against the cooler’s footprint. This unit supports LGA1700 sockets only. It does not fit older Intel or AMD platforms. You need to ensure your case accepts low-profile towers. This cooler is not for high-wattage builds. The 73 TDP rating limits its use to efficient processors. It suits Mini-ITX or HTPC systems where space is tight. If you run a high-end Core i9 under heavy load, this unit may struggle. It fits alongside other compact options in our 1 CPU Air Coolers & Thermal Paste guide. Choose it only if your case dimensions and thermal needs align. Regular dust cleaning with compressed air will maintain performance. No software or complex tools are required for basic upkeep. Keep your airflow path clear for best results.

Check before you buy

• Verify RAM height fits under 29.92mm
• Confirm LGA1700 socket compatibility
• Ensure case supports low-profile towers
• Check if 73 TDP suits your CPU
• Plan for regular dust cleaning

The product at a glance

1

Akasa Low-Profile LGA1700 ITX CPU Cooler

Best for: Low-power CPUs in small cases

Socket Compatibility

LGA1700

Cooler Height

29.92mm

Tower Design

Low-Profile

TDP Rating

73 TDP

System Type

ITX

Material

Copper, Aluminum

View on Amazon: Akasa Low-Profile LGA1700 ITX CPU Cooler Affiliate link

This Akasa cooler is designed for low-profile and Small Form Factor systems. It stands 29.92mm tall and supports Intel LGA1700 sockets. The aluminum heatsink and copper core are optimized for processors up to 73 TDP. Tool-free push-pin mounting simplifies installation. It fits Mini-ITX, Cube, and HTPC cases.

Pros

• 29.92mm low-profile height for SFF builds
• LGA1700 socket compatibility
• Tool-free push-pin mounting system
• Aluminum heatsink with copper core

Cons

• Limited to 73 TDP CPU power
• No RGB lighting features listed
• Fan speed fixed at 74 PWM

Good fit if

• You need a cooler under 30mm tall
• You are building a Mini-ITX system
• Your CPU TDP is 73 or lower

Skip if

• You have a high-TDP processor
• You require RGB lighting effects
• You need adjustable fan speeds

Verdict: Akasa Low-Profile LGA1700 ITX Cooler is a compact solution for small cases. It fits users with low-power CPUs who need reliable cooling in tight spaces.

Specifications side by side

Frequently asked questions

See also

• akasa low profile lga1700 itx CPU cooler alternatives
• akasa copper core value CPU cooler vs ak cc7129bp01 low profile intel
• minorsonic aio CPU cooler review
• razer blackwidow v4 low profile review