6 Best Alternatives to the Akasa Low-Profile LGA1700 ITX CPU Cooler (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Akasa low profile lga1700 itx CPU cooler alternatives list helps you find suitable replacements for your compact build. The original Akasa model offers a 29.92mm height and supports up to 73 TDP, making it reliable for small form factor systems. However, you might need a different solution if your case requires a lower profile or if your processor exceeds the 73 TDP rating. Some users may also prefer copper-only heat transfer or compatibility with older LGA 115x sockets.
We selected these alternatives because their specifications overlap with the original cooler’s key features. The list includes options like the TRONSTORE TS1 for older platforms and the Thermalright AXP90-X47 for quiet operation. You will find coolers with varying heights, from 26.9mm to 70mm, to fit different case constraints. Each product listed here is chosen based on its published specs, such as socket support and material composition, ensuring you get a functional match for your specific hardware needs without relying on unverified claims.
Our top pick: Akasa Low-Profile LGA1700 ITX CPU Cooler.
How each alternative compares
TRONSTORE TS1 92mm CPU Cooler
The TRONSTORE TS1 uses a 92mm fan and fits LGA 1150, 1151, and 1200 sockets. It stands 2.2 inches tall, which is slightly lower than the Akasa’s 29.92mm height. This model weighs only 5.6 ounces, making it lighter than the Akasa unit. It lacks explicit LGA 1700 support, so it is not a direct replacement for modern Intel platforms. You should choose this if you are building with older sockets and need a budget-friendly, slim cooler. It offers basic cooling performance for legacy systems rather than the optimized thermal design found in the Akasa LGA 1700 model.
TRONWIRE TW-2 Low Profile Cooler
The TRONWIRE TW-2 shares the same 2.2-inch height and 92mm fan size as the TRONSTORE TS1. It also supports LGA 1150, 1151, and 1200 sockets but does not list LGA 1700 compatibility. This makes it less suitable for your current Akasa-based build unless you change your motherboard socket. The cooler uses copper and aluminum materials similar to the Akasa design. It is heavier than the TRONSTORE option but lacks the explicit mounting hardware for LGA 1700. Pick this alternative only if you are using an older Intel platform and need a low-profile solution that fits within a 2.2-inch height limit.
Akasa 26.9mm Low-Profile LGA 1700 Cooler
This Akasa model is even more compact, measuring just 1.06 inches or 26.9mm in height. It is lighter at 5.86 ounces compared to the original’s 9.03 ounces. It supports LGA 1700 sockets, ensuring compatibility with your current system. However, it is designed for low-power builds rather than the 73 TDP rating of the original. You should select this version if your case has extremely tight height constraints or if you are using a low-power CPU that generates less heat. It sacrifices some thermal headroom for a smaller footprint and easier installation in very small form factor cases.
Thermalright AXP90-X47 Full Copper Cooler
The Thermalright AXP90-X47 is taller at 1.85 inches, providing more surface area for heat dissipation. It features a full copper construction, which may offer better thermal conductivity than the Akasa’s copper and aluminum mix. It supports multiple sockets including AM4, AM5, and LGA 1200, but does not explicitly list LGA 1700 in its attributes, though the model name suggests compatibility. It weighs 1 pound, making it significantly heavier than the Akasa. Choose this if you need robust cooling in a 47mm package and prioritize pure copper heat transfer over the lighter weight of the original Akasa cooler.
Cooler Master i70C ARGB Low-Profile Cooler
The Cooler Master i70C is taller at 2.76 inches, allowing it to handle up to 95W TDP processors. It supports both LGA 1700 and the newer LGA 1851 sockets. It includes ARGB lighting, which the Akasa lacks. The unit weighs 14.5 ounces, making it heavier than the Akasa cooler. It is wider and deeper, requiring more case clearance. You should pick this alternative if you need higher thermal performance for mid-range Intel CPUs and want aesthetic lighting options. It offers more power handling but requires a larger case volume than the compact Akasa low-profile design.
Thermalright AXP90 Copper Low-Profile Cooler
The Thermalright AXP90 X53 stands 2.09 inches tall, which is shorter than the Cooler Master but taller than the Akasa. It uses a full copper construction for efficient heat transfer. It supports AM4, AM5, LGA 1200, 1150, and 1151 sockets, but does not explicitly list LGA 1700. It uses a 92mm fan similar to other alternatives. This model is best for builders who need reliable cooling under 55mm height limits on older platforms. If you require LGA 1700 support, this may not be the ideal fit. It offers a balance of height and material quality for tight spaces on compatible motherboards.
Quick picks
Our 7 picks
Akasa Low-Profile LGA1700 ITX CPU Cooler
Best for: Compact ITX builds with moderate TDP CPUs
- Socket Compatibility
- LGA1700
- Cooler Height
- 29.92mm
- Tower Design
- Low-Profile
- TDP Rating
- 73 TDP
- System Type
- ITX
- Material
- Copper, Aluminum
View on Amazon: Akasa Low-Profile LGA1700 ITX CPU Cooler Affiliate link
This Akasa cooler fits LGA1700 sockets in tight ITX cases. Its 29.92mm height and 73 TDP rating suit modest builds. The aluminum heatsink and copper core move heat efficiently. Tool-free push-pin mounts simplify installation. You get a compact, reliable solution for small form factor systems that need basic cooling without bulk.
Pros
- 29.92mm low-profile height fits SFF cases
- 73 TDP thermal rating for Core i9
- Tool-free push-pin mounting for LGA1700
- Copper core and aluminum fins design
Cons
- 73 TDP limit restricts high-end overclocking
- No ARGB lighting included in specs
- Single fan configuration only
Good fit if
- You build a Mini-ITX or Cube PC
- You need a cooler under 30mm tall
- You use a moderate TDP Intel CPU
Skip if
- You require RGB lighting effects
- You plan to overclock a high-TDP chip
- You need a cooler taller than 30mm
Verdict: Akasa LGA1700 Low-Profile Cooler fits ITX builders who prioritize case compatibility over extreme thermal headroom. It delivers reliable cooling for stock performance in compact enclosures.
TRONSTORE TS1 92mm CPU Cooler
Best for: older LGA 115x socket builds
- Socket Compatibility
- Socket 1200, 1151, 1150, 1155, 1156
- Fan Size
- 92mm
- System Type
- Desktop
- Material
- Copper, Aluminum
- Features
- Fan
- Dimensions
- 3.62 × 3.62 × 2.2 inches
View on Amazon: TRONSTORE TS1 92mm CPU Cooler Affiliate link
This TRONSTORE TS1 cooler uses a 92mm fan and aluminum heatsink with a copper core base. It stands 2.2 inches tall, making it suitable for small form factor cases. The unit supports LGA 1200, 1150, and 1151 sockets. It includes pre-applied thermal paste and a 4-pin PWM connector. You get a lightweight, tool-free installation option for Intel desktop processors.
Pros
- 92mm fan for effective heat dissipation
- Copper core base with aluminum heatsink
- Pre-applied thermal paste included
- Tool-free push pin installation
- 4-pin PWM fan speed control
Cons
- Limited socket support excludes LGA 1700
- No ARGB lighting features
- Basic aluminum and copper construction
Good fit if
- You need a low profile cooler under 2.2 inches
- You use an LGA 1200 or 1151 motherboard
- You want a lightweight cooler under 6 ounces
Skip if
- You have an LGA 1700 socket
- You require RGB lighting effects
- You need support for newer Intel sockets
Verdict: TRONSTORE TS1 92mm Low Profile Cooler offers basic cooling for older Intel platforms. It fits users with LGA 115x sockets who need a slim, affordable solution.
TRONWIRE TW-2 Low Profile Cooler
Best for: LGA 1200/1151 builds needing 92mm airflow
- Socket Compatibility
- LGA 1200, 1151, 1150, 1155, 1156
- Cooler Height
- 2.2 inches
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 3000 RPM
- System Type
- Desktop
View on Amazon: TRONWIRE TW-2 Low Profile Cooler Affiliate link
The TRONWIRE TW-2 is a low-profile air cooler designed for space-constrained builds. It features a 92mm fan running at 3000 RPM for efficient heat dissipation. The aluminum heatsink includes a copper core base to improve thermal transfer. It supports LGA 1200, 1150, and 1151 sockets. The unit measures 2.2 inches in height, making it suitable for small form factor desktops.
Pros
- 92mm fan operating at 3000 RPM
- Aluminum heatsink with copper core base
- Pre-applied thermal paste for easy installation
- 4-pin PWM connector with 12V DC operation
Cons
- Height is 2.2 inches, which is taller than the 1.85-inch Akasa and Thermalright AXP90 options on this list
- Socket compatibility list omits LGA 1700, requiring verification for your specific motherboard
- No mention of ARGB lighting or software control features
Good fit if
- You need a budget-friendly cooler for LGA 1200 or 1151 systems
- You have a case that accommodates up to 2.2 inches of cooler height
- You prefer tool-free push pin installation over screws
Skip if
- You are building an LGA 1700 system without confirmed bracket support
- You require a cooler height under 2 inches for tight clearance
- You need RGB lighting synchronization for your build
Verdict: TRONWIRE TW-2 Low Profile 92mm Cooler works well for older Intel platforms like LGA 1200 where height limits are moderate. It is not the optimal choice for new LGA 1700 builds due to the lack of explicit socket support and taller profile compared to dedicated ITX coolers.
Akasa 26.9mm Low-Profile LGA 1700 Cooler
Best for: Low-power LGA1700 Mini-ITX builds
- Socket Compatibility
- LGA1700
- Cooler Height
- 26.9 mm
- Tower Design
- Low-Profile
- Fan Size
- 75 mm
- TDP Rating
- 35 W
- System Type
- ITX
View on Amazon: Akasa 26.9mm Low-Profile LGA 1700 Cooler Affiliate link
This Akasa cooler is built for Intel LGA1700 sockets in Mini-ITX and HTPC cases. It features a 26.9 mm height and a 75 mm PWM fan. The aluminum core handles processors up to 35W TDP. Tool-free push pins ensure a secure fit. The pre-installed thermal interface simplifies setup. It is designed for small form factor builds where space is tight.
Pros
- 26.9 mm low-profile height fits small cases
- Supports Intel LGA1700 sockets
- Includes pre-installed thermal interface
- Tool-free push pin assembly for easy installation
Cons
- Limited to 35W TDP processors
- Small 75 mm fan may run louder
- Aluminum construction has lower heat capacity than copper
Good fit if
- You need a cooler under 27 mm tall
- You use an Intel LGA1700 motherboard
- Your CPU has a TDP of 35W or less
Skip if
- You have a high-TDP processor over 35W
- You require copper heat pipes for better cooling
- You need RGB lighting or ARGB support
Verdict: Akasa LGA1700 26.9mm Low-Profile Cooler is a compact solution for low-power LGA1700 builds in small cases. It fits users who prioritize height constraints and easy installation over high thermal performance.
Thermalright AXP90-X47 Full Copper Cooler
Best for: quiet ITX builds with tight height limits
- Socket Compatibility
- AM4, AM5, LGA 1150/1151/1200/1700
- Cooler Height
- 47mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright AXP90-X47 Full Copper Cooler Affiliate link
The Thermalright AXP90 X47 is a 47mm low-profile air cooler designed for Intel LGA 1700 and AMD AM4/AM5 sockets. It features four heat pipes and a pure copper base for efficient heat transfer. The included 92mm PWM fan delivers 42.58 CFM of airflow while maintaining a low noise level of 22.4 dB. This compact design suits small ITX cases where space is limited but cooling performance remains a priority.
Pros
- 47mm total height fits tight cases
- Four heat pipes ensure strong heat transfer
- Pure copper base improves conductivity
- 92mm PWM fan offers automatic speed control
- Low noise level of 22.4 dB
Cons
- 47mm height is taller than 35mm alternatives
- No ARGB lighting included
- 92mm fan may limit airflow compared to larger sizes
Good fit if
- You need a cooler under 50mm for ITX builds
- You prioritize quiet operation over maximum RGB aesthetics
- You use Intel LGA 1700 or AMD AM4/AM5 sockets
Skip if
- You require RGB lighting synchronization
- You need a cooler under 40mm for extreme clearance
- You prefer a larger 120mm fan for higher airflow
Verdict: Thermalright AXP90 X47 Low Profile is a solid choice for ITX builders who need reliable cooling in a compact 47mm package without RGB distractions. It fits users who value quiet operation and pure copper heat transfer in small form factor cases.
Cooler Master i70C ARGB Low-Profile Cooler
Best for: Low-profile Intel LGA 1700 builds under 95W
- Socket Compatibility
- LGA 1700, LGA 1851
- Cooler Height
- 70mm
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- TDP Rating
- 95W
- Fan Speed
- 1,800 RPM
View on Amazon: Cooler Master i70C ARGB Low-Profile Cooler Affiliate link
The Cooler Master i70C is a 70mm low-profile air cooler designed for Intel LGA 1700 and LGA 1851 sockets. It pairs a copper insert base with anodized black aluminum fins to handle up to 95W TDP. The included 120mm PWM fan runs between 650 and 1,800 RPM. Frosted blades enhance the ARGB lighting effect. This compact unit suits users needing minimal height in small form factor cases.
Pros
- 70mm height fits tight low-profile chassis
- Copper insert base aids heat dissipation
- 120mm PWM fan allows speed adjustment
- ARGB lighting with frosted blade design
Cons
- 95W TDP rating limits high-end CPU use
- No software control for ARGB listed
- Fan speed maxes at 1,800 RPM
Good fit if
- You need a 70mm tall cooler for ITX builds
- You use an Intel Core i5 or i7 under 95W
- You want ARGB lighting in a low-profile design
Skip if
- You require a cooler for a 125W or higher CPU
- You need a cooler taller than 70mm
- You prefer a non-ARGB minimalist aesthetic
Verdict: Cooler Master i70C ARGB Low Profile 70mm fits small cases with its 70mm height and handles 95W TDP processors. It is a solid choice for mid-range Intel builds in low-profile chassis.
Thermalright AXP90 Copper Low-Profile Cooler
Best for: ITX builds needing reliable cooling under 55mm
- Cooler Height
- 53mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 2700 RPM
- Socket Compatibility
- AM4, AM5, LGA 1200, LGA 1150, LGA 1151
View on Amazon: Thermalright AXP90 Copper Low-Profile Cooler Affiliate link
This low-profile air cooler stands 53mm tall, making it suitable for small ITX cases. It uses four 6mm heat pipes with AGHP technology to manage heat effectively in vertical or horizontal positions. The included 92mm fan runs up to 2700 RPM with a maximum airflow of 42.58 CFM. It features a pure copper base and an S-FDB bearing fan for durability. This unit supports LGA 1700 and other common sockets.
Pros
- 53mm low-profile height fits compact cases
- 4x6mm heat pipes with AGHP technology
- Pure copper base for efficient heat transfer
- 92mm fan reaches 2700 RPM max speed
- S-FDB bearing fan rated for 20,000 hours
Cons
- 53mm height is taller than the 47mm alternative
- No ARGB lighting included in this model
- Fan noise reaches 22.4 dB at max speed
Good fit if
- You need a cooler under 55mm for an ITX build
- You prioritize cooling performance over aesthetic lighting
- You want a pure copper base for better heat dissipation
Skip if
- You require RGB lighting for your system theme
- You need a cooler shorter than 50mm
- You plan to use the cooler in a non-ITX mid-tower case
Verdict: Thermalright AXP90 X53 Low-Profile Cooler offers solid cooling for tight spaces with its copper base and 92mm fan. It is the right choice for ITX builders who need reliable performance without RGB lighting.
Specifications side by side
| Spec | Akasa Low-Profile LGA1700 ITX CPU Cooler | TRONSTORE TS1 92mm CPU Cooler | TRONWIRE TW-2 Low Profile Cooler | Akasa 26.9mm Low-Profile LGA 1700 Cooler | Thermalright AXP90-X47 Full Copper Cooler | Cooler Master i70C ARGB Low-Profile Cooler | Thermalright AXP90 Copper Low-Profile Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA1700 | Socket 1200, 1151, 1150, 1155, 1156 | LGA 1200, 1151, 1150, 1155, 1156 | LGA1700 | AM4, AM5, LGA 1150/1151/1200/1700 | LGA 1700, LGA 1851 | not stated |
| Cooler Height | 29.92mm | not stated | 2.2 inches | 26.9 mm | 47mm | 70mm | 53mm |
| Heat Pipes | not stated | not stated | not stated | not stated | 4 | not stated | 4 |
| Tower Design | Low-Profile | not stated | Low-Profile | Low-Profile | Low-Profile | Low-Profile | Low-Profile |
| Fan Size | not stated | 92mm | 92mm | 75 mm | 92mm | 120mm | 92mm |
| TDP Rating | 73 TDP | not stated | not stated | 35 W | not stated | 95W | not stated |
| Fan Speed | not stated | not stated | 3000 RPM | not stated | not stated | 1,800 RPM | 2700 RPM |
| Lighting | not stated | not stated | not stated | not stated | not stated | ARGB | not stated |
| System Type | ITX | Desktop | Desktop | ITX | ITX | not stated | ITX |
| Color | Black | not stated | not stated | Black | AXP90-X47 Full | Black | AXP90 X53 FULL |
| Material | Copper, Aluminum | Copper, Aluminum | Copper, Aluminum | Aluminum | Copper | Copper, Aluminum | Copper |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 3.43 × 3.35 × 1.18 inches | 3.62 × 3.62 × 2.2 inches | 3.62 × 3.62 × 2.2 inches | 3.43 × 3.35 × 1.06 inches | 3.72 × 3.74 × 1.85 inches | 4.72 × 4.72 × 2.76 inches | 3.72 × 3.74 × 2.09 inches |
| Weight | 9.03 ounces | 5.6 ounces | not stated | 5.86 ounces | 1 pounds | 14.5 ounces | not stated |
| Model | AK-CC6602HP01 | TS1 | not stated | AK-CC6601EP01 | AXP90-X47 Full-1700-d6 | RR-I7C7-18PA-R1 | AXP90 X53 FULL D6 |
| Size | not stated | not stated | not stated | not stated | 47mm | 3.40 | 53mm |
If you prefer liquid cooling, you can evaluate pump and radiator dimensions across minorsonic aio CPU cooler alternatives.
Frequently asked questions
Which low-profile cooler is best for LGA 1700 ITX builds?
The Akasa Low-Profile LGA1700 ITX CPU Cooler is the top pick. It measures 3.35 by 3.43 inches with a height of 1.18 inches. This model fits compact ITX cases well. It uses copper and aluminum materials. It is designed for stock performance in small enclosures.
Does the TRONSTORE TS1 support LGA 1700 sockets?
No, the TRONSTORE TS1 does not support LGA 1700. It is compatible with LGA 1200, LGA 1150, and LGA 1151 sockets. This cooler is intended for older Intel platforms. It uses a 92mm fan and weighs 5.6 ounces. You should choose a different model for LGA 1700.
What is the thinnest LGA 1700 cooler on this list?
The Akasa 26.9mm Low-Profile LGA 1700 Cooler is the thinnest option. Its height is 1.06 inches. It is designed for low-power LGA 1700 builds. The cooler weighs 5.86 ounces and uses aluminum material. It prioritizes height constraints over high thermal performance.
Is there a full copper low-profile cooler for LGA 1700?
The Thermalright AXP90-X47 Full Copper Cooler is a solid choice. It features a full copper construction. However, it does not explicitly list LGA 1700 support in its attributes. It supports AM4, AM5, LGA 1200, LGA 1150, and LGA 1151. Check compatibility before buying.
Which cooler supports the new LGA 1851 socket?
The Cooler Master i70C ARGB Low-Profile Cooler supports LGA 1851 and LGA 1700. It has a height of 2.76 inches. It handles 95W TDP processors. The model includes ARGB lighting. It is suitable for mid-range Intel builds in low-profile chassis.
Can I use the TRONWIRE TW-2 for LGA 1700?
The TRONWIRE TW-2 is not optimal for LGA 1700. It supports LGA 1200, LGA 1150, and LGA 1151. It lacks explicit support for the newer LGA 1700 socket. Its height is 2.2 inches. You should select a cooler with verified LGA 1700 compatibility.
How tall is the Thermalright AXP90 X53?
The Thermalright AXP90 X53 has a height of 2.09 inches. It is a low-profile cooler with a 92mm fan. It uses a copper base. It supports AM4, AM5, LGA 1200, LGA 1150, and LGA 1151. It is designed for ITX builds under 55mm height limits.