Akasa CPU Coolers: 5 Picks Ranked by Specs

Quick picks

Our 5 picks

1 Best overall

Akasa 92mm Copper Core CPU Cooler

Best for: Intel CPUs up to 115W in compact cases

Socket Compatibility

LGA 1200/1151/1150/1155/1156/775

Fan Size

92mm

TDP Rating

115W

Material

Copper

Features

Fan

Dimensions

3.74 × 3.74 × 2.44 inches

View on Amazon: Akasa 92mm Copper Core CPU Cooler Affiliate link

This Akasa cooler uses a copper base and aluminum fins to handle up to 115W TDP. The 92mm PWM fan adjusts speed based on CPU load. It supports LGA 1200, 1151, 1150, 1155, 1156, and 775 sockets. The pushpin installation is designed for easy setup without adjustment. It fits well in cases where space is limited but you need reliable cooling.

Pros

• Copper core base for efficient heat transfer
• 92mm PWM fan for quiet operation
• Supports multiple Intel sockets including LGA 1200
• Pushpin installation for easy mounting

Cons

• 92mm fan size limits airflow compared to larger coolers
• 115W TDP rating may not suffice for high-end CPUs
• Limited to Intel sockets, no AMD support listed

Good fit if

• You need a low-profile cooler for a compact case
• You are using an Intel CPU with a TDP up to 115W
• You prefer quiet operation under normal workloads

Skip if

• You require cooling for CPUs with TDP higher than 115W
• You are building an AMD-based system
• You need a cooler with a larger fan for maximum airflow

Verdict: Akasa Copper Core 92mm CPU Cooler is a practical choice for users with Intel CPUs up to 115W who need a compact, quiet solution. It is ideal for those prioritizing ease of installation and low noise levels.

2 Also great

Akasa 21mm Low-Profile Intel Cooler

Best for: Small cases with older Intel sockets

Socket Compatibility

LGA775, LGA1150, LGA1155, LGA1156

Cooler Height

21mm

Tower Design

Low Profile

Fan Size

8cm

Dimensions

3.35 × 3.43 × 0.83 inches

Weight

5.43 ounces

View on Amazon: Akasa 21mm Low-Profile Intel Cooler Affiliate link

This Akasa cooler is built for tight cases. It stands only 21mm tall. It uses an 8cm PWM fan with twin ball bearings. The unit supports LGA775, LGA1150, LGA1155, and LGA1156 sockets. It includes a backplate and pre-applied thermal paste. You should choose this if your case height is limited. It is a compact solution for older Intel platforms.

Pros

• 21mm total height fits small cases
• 8cm PWM fan with twin ball bearings
• Pre-applied thermal interface for easy setup
• Includes motherboard backplate and spring-loaded screws

Cons

• Only supports older Intel sockets
• Small 8cm fan may limit airflow
• Low profile design restricts heat dissipation

Good fit if

• You need a cooler under 25mm tall
• You use an LGA115x or LGA775 socket
• You have a small form factor case

Skip if

• You use LGA1700 or LGA1200 sockets
• You need high cooling performance
• You require modern socket compatibility

Verdict: Akasa Low Profile Intel Cooler 21mm is a compact option for older Intel systems. It fits cases with strict height limits. It is not suitable for modern processors.

3 Best budget

Akasa 26.9mm Low-Profile LGA 1700 Cooler

Best for: Mini-ITX cases with 35W CPUs

Socket Compatibility

LGA1700

Cooler Height

26.9 mm

Tower Design

Low-Profile

Fan Size

75 mm

TDP Rating

35 W

System Type

ITX

View on Amazon: Akasa 26.9mm Low-Profile LGA 1700 Cooler Affiliate link

This Akasa cooler is designed for Mini-ITX and HTPC builds where space is tight. It features a 26.9 mm height and a 75 mm PWM fan. The aluminum core handles processors up to 35 W TDP. It includes tool-free push pins for LGA1700 installation. You get a reliable, compact solution for small form factor systems without complex assembly.

Pros

• 26.9 mm low profile height fits tight cases
• 75 mm PWM fan for airflow
• Tool-free push pin assembly for LGA1700
• Aluminum heat sink core

Cons

• Limited to 35 W TDP processors
• 75 mm fan is smaller than standard 120 mm fans
• Aluminum construction may have lower heat capacity than copper

Good fit if

• You need a cooler under 27 mm tall
• You are building a Mini-ITX or HTPC system
• Your CPU has a 35 W TDP or lower

Skip if

• You have a high TDP processor above 35 W
• You require a standard 120 mm fan size
• You are using a full tower ATX case

Verdict: Akasa 26.9mm Low Profile LGA1700 Cooler is a practical option for Mini-ITX builders with low-power CPUs. It fits where standard coolers cannot, provided your processor stays within the 35 W limit.

4 Also great

Akasa Low-Profile LGA1700 ITX CPU Cooler

Best for: Low TDP Intel LGA1700 in SFF cases

Socket Compatibility

LGA1700

Cooler Height

29.92mm

Tower Design

Low-Profile

TDP Rating

73 TDP

System Type

ITX

Material

Copper, Aluminum

View on Amazon: Akasa Low-Profile LGA1700 ITX CPU Cooler Affiliate link

This Akasa cooler is designed for Intel LGA1700 sockets in Small Form Factor cases. It stands 29.92mm tall with a 73 W TDP rating. The aluminum heatsink uses a copper core for heat dissipation. It mounts via tool-free push-pins. You should choose this if your case has strict height limits and your processor stays under 73 W.

Pros

• 29.92mm low-profile height fits tight cases
• LGA1700 socket compatibility for modern Intel CPUs
• Tool-free push-pin mounting system
• Aluminum heatsink with copper core

Cons

• 73 W TDP rating limits high-power CPUs
• No fan speed control mentioned in specs
• Single fan configuration only

Good fit if

• You use a Mini-ITX or Cube case
• You have an Intel LGA1700 processor under 73 W
• You need tool-free installation

Skip if

• You run a CPU exceeding 73 W TDP
• Your case height exceeds 30mm
• You need RGB lighting or fan curves

Verdict: Akasa LGA1700 Mini-ITX Low-Profile Cooler fits small cases with low TDP Intel chips. It works for users who prioritize compact size over thermal headroom.

5 Best premium

Akasa ALUCIA H6LS M2 Low-Profile Cooler

Best for: Compact builds needing 150W cooling

Socket Compatibility

LGA1851, LGA1700, AM5

Cooler Height

67.2mm

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120mm

TDP Rating

150W

View on Amazon: Akasa ALUCIA H6LS M2 Low-Profile Cooler Affiliate link

The Akasa ALUCIA H6LS is a low-profile air cooler designed for compact builds. It features six copper heat pipes and a 120mm fan to handle CPUs up to 150W TDP. The tower stands only 67.2mm tall, ensuring it fits in small form factor cases. It includes a PWM fan that runs up to 2000 RPM. You get compatibility with LGA1700, LGA1851, and AM5 sockets.

Pros

• Six copper heat pipes for efficient heat transfer
• Low-profile tower height of 67.2mm
• 120mm fan supports speeds up to 2000 RPM
• Handles CPU TDP ratings up to 150W

Cons

• Tower height of 67.2mm may restrict tall RAM modules
• Single fan configuration limits maximum airflow potential
• Heavier weight of 1.76 pounds requires sturdy mounting

Good fit if

• You need a cooler under 70mm for a mini ITX case
• You are building with LGA1700 or AM5 processors
• You want a 120mm fan for better static pressure

Skip if

• You require a dual-tower design for extreme cooling
• You have very tall RAM that exceeds 67mm clearance
• You prefer a silent operation below 700 RPM

Verdict: Akasa ALUCIA H6LS Low-Profile 67mm Cooler fits users who need high thermal performance in a small footprint. It is ideal for compact systems running 150W processors.

Specifications side by side

Akasa CPU Coolers Ranked by Specs

The Akasa lineup separates easily by socket support and case constraints. The Akasa 92mm Copper Core CPU Cooler targets Intel LGA 1200 and 775 systems in compact cases. The Akasa 21mm Low-Profile Intel Cooler fits older Intel sockets where height is strictly limited. These options prioritize physical fit over raw thermal capacity.

For modern LGA 1700 builds, the Akasa 26.9mm Low-Profile LGA 1700 Cooler suits Mini-ITX cases with low-power chips. The Akasa Low-Profile LGA1700 ITX CPU Cooler offers a slightly heavier alternative for similar small form factor needs. If you need more thermal headroom, the Akasa ALUCIA H6LS M2 Low-Profile Cooler uses six heat pipes for 150W processors. This group balances size with performance.

Where Akasa Fits Your Build

Akasa targets compact and low-profile needs. You will find options for LGA 1700 and older LGA 775 sockets. The range spans from 0.83-inch heights to 2.65-inch designs. Most units use copper or aluminum fins. You can choose between 92mm and 120mm fans. The lineup covers 35W to 150W thermal loads. It does not offer air coolers for AMD sockets. There are no RGB lighting options in this selection. You also will not find tower-style coolers with multiple fans. This brand focuses on space-saving solutions for small form factor cases.

How to Choose the Right Akasa Cooler

1. Check Socket Compatibility

   Verify that the cooler supports your specific CPU socket before buying. The Akasa 92mm Copper Core CPU Cooler supports LGA 1200 and LGA 775. This makes it suitable for older Intel platforms. If you have a newer LGA 1700 processor, you must select a different model. The Akasa 26.9mm Low-Profile LGA 1700 Cooler is designed for this socket. Always match the cooler's listed compatibility to your motherboard to ensure proper mounting.

2. Measure Case Height

   Your computer case has a maximum cooler height limit. You must measure the space inside your case before purchasing. The Akasa 21mm Low-Profile Intel Cooler stands only 0.83 inches tall. This fits cases with strict height restrictions. The Akasa 26.9mm Low-Profile LGA 1700 Cooler is 1.06 inches high. It is also suitable for tight spaces. Ensure the cooler height is less than your case's limit to avoid interference with side panels.

3. Evaluate Heat Pipe Count

   Heat pipes transfer heat from the CPU to the fins. More pipes generally mean better thermal performance. The Akasa ALUCIA H6LS M2 Low-Profile Cooler includes six heat pipes. This design helps it handle processors up to 150W in a compact size. Other models in this list do not specify heat pipe counts. If you need high cooling capacity for a powerful CPU, prioritize units with multiple heat pipes.

4. Consider System Type

   The type of system you are building affects your cooler choice. Mini-ITX cases have limited space and airflow. The Akasa 26.9mm Low-Profile LGA 1700 Cooler is listed for ITX systems. It is ideal for small form factor builds with low-power CPUs. The Akasa Low-Profile LGA1700 ITX CPU Cooler is also designed for ITX systems. If you are building a standard ATX tower, you may have more options available.

5. Assess Material Quality

   Cooler materials impact heat dissipation and durability. Copper conducts heat better than aluminum. The Akasa 92mm Copper Core CPU Cooler uses copper for its core. This material helps manage heat for Intel CPUs up to 115W. The Akasa ALUCIA H6LS M2 also uses copper. Some models use aluminum fins. Check the material specifications to understand the thermal properties. Copper cores are often preferred for better heat transfer efficiency.

Frequently asked questions

See also

• akasa copper core value CPU cooler vs ak cc7129bp01 low profile intel
• akasa vs startech com CPU cooler
• best case fans for CPU Cooler
• minorsonic aio CPU cooler review