Akasa 92mm Copper Core CPU Cooler vs Akasa 21mm Low-Profile Intel Cooler (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the akasa copper core value CPU cooler vs ak cc7129bp01 low profile intel. Both options come from Akasa and use PWM fans for speed control. The main difference lies in their physical design and capacity. One is a standard 92mm tower with a copper core base for higher TDPs. The other is a compact 21mm low-profile unit with a pre-applied thermal interface. You need to choose based on your case size and socket type.
Key differences
| Aspect | Akasa 92mm Copper Core CPU Cooler | Akasa 21mm Low-Profile Intel Cooler |
|---|---|---|
| Cooler Height | 2.44 inches | 21mm (0.83 inches) |
| Fan Size | 92mm | 8cm (80mm) |
| TDP Rating | 115W | not listed |
| Socket Compatibility | LGA 1200, 1151, 1150, 1155, 1156, 775 | LGA 775, 1150, 1155, 1156 |
| Base Material | Copper core | not listed |
Which one should you choose?
Choose Akasa 92mm Copper Core CPU Cooler if
- You need a cooler rated for up to 115W TDP processors.
- Your CPU socket includes LGA 1200 or LGA 1151.
- Your case has standard tower clearance above the motherboard.
Choose Akasa 21mm Low-Profile Intel Cooler if
- You are building in a small form factor case with height limits.
- You want a pre-applied thermal interface and backplate for easy setup.
- You only need to support older Intel sockets like LGA 1156 or 775.
Verdict: The 92mm Copper Core is the better choice for standard ATX cases and higher power CPUs. The 21mm Low-Profile model is strictly for tight spaces where height is the primary constraint. Your decision depends on physical clearance and socket generation.
Akasa Cooler Specs Compared
tower design
The Akasa 92mm Copper Core CPU Cooler features a standard tower design with a height of 2.44 inches. This form factor allows for substantial airflow over the copper core base and aluminium fins. In contrast, the Akasa 21mm Low-Profile Intel Cooler is built for compact cases. Its total height is only 21mm, which is significantly lower than the 92mm model. This low-profile design prioritizes clearance over raw surface area. You must choose between the robust tower structure for better cooling potential or the slim 21mm profile for small form factor builds. The physical footprint differs greatly between these two distinct categories.
fan size
Fan diameter directly impacts airflow volume and noise levels. The Akasa 92mm Copper Core CPU Cooler uses a 92mm PWM fan. This larger diameter allows the fan to move more air at lower rotational speeds, which often results in quieter operation under load. The Akasa 21mm Low-Profile Intel Cooler uses an embedded 8cm fan. An 8cm fan is smaller and typically needs to spin faster to achieve similar airflow to a 92mm unit. This can lead to higher noise levels. If you prioritize quiet computing and maximum air movement, the 92mm fan offers a practical advantage. The larger fan size generally provides better thermodynamic efficiency.
socket compatibility
Both coolers support older Intel platforms, but the range differs. The Akasa 92mm Copper Core CPU Cooler supports LGA 1200, 1151, 1150, 1155, 1156, and 775. It also offers a variation for LGA 1700 and LGA 1851. This wide range covers most modern and legacy Intel sockets. The Akasa 21mm Low-Profile Intel Cooler supports LGA 775, 1150, 1155, and 1156. It lacks support for newer sockets like LGA 1200 or LGA 1700. If you are building on a newer platform, the 92mm cooler is the only viable option. The 21mm model is restricted to older generations.
heat dissipation capacity
Thermal Design Power rating indicates how much heat a cooler can handle. The Akasa 92mm Copper Core CPU Cooler is rated for up to 115W TDP. This allows it to manage high-end processors that generate significant heat. The Akasa 21mm Low-Profile Intel Cooler does not list a specific TDP rating. Low-profile coolers generally have less surface area and smaller fans, limiting their ability to dissipate high heat loads. You should assume the 21mm model is suitable for lower-power CPUs. For high-performance tasks, the 115W rated tower cooler provides a clear advantage in maintaining safe operating temperatures.
bearing type
The bearing mechanism affects longevity and noise. The Akasa 92mm Copper Core CPU Cooler uses a rolling bearing. This type of bearing is noted for reducing rotational friction and supporting heavy workloads. It is rated for up to 40,000 hours of service life. The Akasa 21mm Low-Profile Intel Cooler uses twin ball bearings. Ball bearings are also known for durability and long life. Both products use high-quality bearings designed for extended use. There is no significant performance difference in reliability between rolling and twin ball bearings for typical home use. Both options offer robust construction for long-term operation.
Which Akasa cooler suits your build
Users needing high thermal capacity for powerful CPUs
Choose the Akasa 92mm Copper Core if you need serious cooling for high TDP processors. Its 115W rating and larger 92mm fan provide robust airflow. The rolling bearing supports heavy workloads for up to 40,000 hours. This tower design fits standard cases and handles heat dissipation better than low-profile options.
Owners of compact cases with strict height limits
Select the Akasa 21mm Low-Profile Intel Cooler for tight spaces. Its total height is only 21mm, fitting inside small form factor cases. It uses a twin ball bearing for longevity and includes pre-applied thermal interface. This model supports LGA775 and LGA115x sockets, making it ideal for compact Intel builds.
Builders prioritizing quiet operation under normal loads
The Akasa 92mm Copper Core features a PWM fan regulated by CPU usage. This allows the fan speed to stay low during normal PC workloads, ensuring quiet computing. The omni-directional heatsink design also helps manage noise while providing efficient cooling for the CPU and surrounding motherboard zones.
The products compared
Akasa 92mm Copper Core CPU Cooler
Best for: Older Intel CPUs under 115W
- Socket Compatibility
- LGA 1200/1151/1150/1155/1156/775
- Fan Size
- 92mm
- TDP Rating
- 115W
- Material
- Copper
- Features
- Fan
- Dimensions
- 3.74 × 3.74 × 2.44 inches
View on Amazon: Akasa 92mm Copper Core CPU Cooler Affiliate link
This Akasa cooler uses a copper core base with aluminum fins to handle up to 115W TDP. It includes a 92mm PWM fan for quiet operation. The heatsink measures 3.74 inches wide and 2.44 inches tall. It supports older Intel sockets like LGA 775 through LGA 1200. You get easy installation with pushpins. It suits builds needing reliable cooling without high noise levels.
Pros
- Copper core base for efficient heat transfer
- 92mm PWM fan adjusts speed based on CPU load
- Rolling bearing supports up to 40,000 hours of use
- Pushpin installation requires no mounting adjustment
Cons
- 92mm fan size limits maximum airflow compared to larger coolers
- 2.44-inch height may not fit in very small cases
- Does not support modern LGA 1700 sockets without specific variation
Good fit if
- You need a quiet cooler for standard office or media PCs
- You have an older Intel socket like LGA 115x or LGA 775
- You want a low-profile option under 2.5 inches tall
Skip if
- You use a modern LGA 1700 socket
- You have a case with less than 2.5 inches of clearance
- You need a cooler for high-end gaming CPUs over 115W
Verdict: Akasa 92mm Copper Core CPU Cooler delivers solid cooling for older Intel platforms with quiet operation. It fits users who prioritize low noise and easy installation over maximum thermal headroom.
Akasa 21mm Low-Profile Intel Cooler
Best for: Older Intel sockets in small cases
- Socket Compatibility
- LGA775, LGA1150, LGA1155, LGA1156
- Cooler Height
- 21mm
- Tower Design
- Low Profile
- Fan Size
- 8cm
- Dimensions
- 3.35 × 3.43 × 0.83 inches
- Weight
- 5.43 ounces
View on Amazon: Akasa 21mm Low-Profile Intel Cooler Affiliate link
This Akasa cooler is built for tight cases with a total height of just 21mm. It uses an 8cm PWM fan with twin ball bearings for reliable operation. The unit supports LGA775, LGA1150, LGA1155, and LGA1156 sockets. It includes a motherboard backplate and pre-applied thermal interface. You should choose this if your case has strict clearance limits for low-profile builds.
Pros
- Ultra-compact 21mm height fits small form factor cases
- 8cm PWM fan with twin ball bearing for longevity
- Pre-applied thermal interface and included motherboard backplate
- Supports multiple older Intel socket platforms
Cons
- Limited to older Intel sockets without LGA1700 support
- Smaller 8cm fan may run louder than 120mm fans
- Lower thermal capacity due to minimal heatsink size
Good fit if
- You need a cooler under 25mm in height
- You use an older Intel LGA115x or LGA775 socket
- You are building a compact ITX system
Skip if
- You require support for modern LGA1700 sockets
- You need high cooling performance for heavy loads
- You prefer larger 120mm or 140mm fans for silence
Verdict: Akasa 21mm Low-Profile Intel Cooler is a specialized solution for older Intel platforms in tight spaces. It fits buyers who prioritize case compatibility over raw cooling power.
Specifications side by side
| Spec | Akasa 92mm Copper Core CPU Cooler | Akasa 21mm Low-Profile Intel Cooler |
|---|---|---|
| Socket Compatibility | LGA 1200/1151/1150/1155/1156/775 | LGA775, LGA1150, LGA1155, LGA1156 |
| Cooler Height | not stated | 21mm |
| Tower Design | not stated | Low Profile |
| Fan Size | 92mm | 8cm |
| TDP Rating | 115W | not stated |
| Material | Copper | not stated |
| Features | Fan | not stated |
| Dimensions | 3.74 × 3.74 × 2.44 inches | 3.35 × 3.43 × 0.83 inches |
| Weight | 12.3 ounces | 5.43 ounces |
| Model | AK-959CU | AK-CC7129BP01 |
Frequently asked questions
Does the Akasa 92mm Copper Core fit LGA 1700?
No, it does not support LGA 1700. The published specifications list compatibility only for LGA 1200 and LGA 775 sockets. You should verify your motherboard socket type before purchasing. This cooler is designed for older Intel platforms and lacks the mounting hardware required for modern 1700-series boards.
How tall is the Akasa 21mm Low-Profile Intel Cooler?
The Akasa 21mm Low-Profile Intel Cooler stands 0.83 inches tall. Its model number is AK-CC7129BP01. This compact height allows it to fit inside small form factor cases where standard towers would not clear RAM modules. It prioritizes physical compatibility over high thermal performance.
What is the weight difference between the two coolers?
The Akasa 92mm Copper Core weighs 12.3 ounces, while the low-profile model weighs 5.43 ounces. The difference is nearly seven ounces. The heavier tower design uses more copper and aluminum to manage heat for higher TDP processors. The lighter unit sacrifices mass for a smaller footprint.
Can I use the Akasa 92mm on a modern motherboard?
You can only use it on LGA 1200 or LGA 775 sockets. It does not support newer sockets like LGA 1700 or LGA 1200. If your system uses a recent Intel CPU, this cooler will not physically attach. Check your specific CPU socket before buying.
Which cooler is better for a small ITX case?
The Akasa 21mm Low-Profile Intel Cooler is the better choice. It measures 3.43 inches wide and 0.83 inches high. This low profile ensures it fits in tight spaces without blocking memory slots. The 92mm tower is too tall for most small cases, reaching 2.44 inches in height.
Does the Akasa 92mm Copper Core use a fan?
Yes, the Akasa 92mm Copper Core includes a fan. The product attributes list fan as a key feature. This fan provides active cooling for the copper core base. It helps maintain quiet operation while handling loads up to 115W on compatible older Intel platforms.
What material is the base of the Akasa 92mm Cooler?
The base material is copper. This is listed in the attributes for the Akasa 92mm Copper Core CPU Cooler. Copper conducts heat efficiently from the CPU to the fins. The low-profile model does not specify its base material in the provided data, so you cannot confirm its composition.