Icepc M.2 Heatsink PS5 PCI-E or Icepc 1.5mm Graphene Copper M.2? Which Icepc Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This icepc m 2 heatsink ps5 pci e vs 1 5mm graphene copper m 2 comparison looks at two cooling options for your M.2 NVMe SSDs. Both models use copper construction and graphene coating to help manage heat in narrow spaces like laptops or PS5 consoles. They share the same 2280 size compatibility and adhesive thermal pad mounting. The main difference lies in their physical thickness and weight, which affects fit and thermal mass. You need to check your available clearance before choosing.
Key differences
| Aspect | Icepc Graphene Copper M.2 Heatsink | Icepc 1.5mm Graphene Copper M.2 Heatsink |
|---|---|---|
| Thickness | 2mm (0.08 inches) | 1.5mm (0.06 inches) |
| Weight | 0.71 ounces | 1.59 ounces |
| Model Number | CAICEPC0008-2 | ICEPC0016-1.5 |
Which one should you choose?
Choose Icepc Graphene Copper M.2 Heatsink if
- You have limited vertical clearance around your M.2 slot and need the thinnest possible profile.
- You prefer a lighter heatsink that adds minimal mass to your drive.
- You want the option to buy the unit in a pack of two for multiple drives.
Choose Icepc 1.5mm Graphene Copper M.2 Heatsink if
- You have slightly more room and want a heavier copper mass for potentially greater heat absorption.
- You are installing in a PS5 or laptop where the 1.5mm thickness is specifically noted as compatible.
- You prioritize the model explicitly listed as having a 1.5mm graphene copper design.
Verdict: The 2mm model is better if space is tight or you need a lighter setup. The 1.5mm model offers more copper mass for heat absorption if your case allows the extra thickness. Choose based on your specific clearance and weight preferences.
Icepc Heatsink Comparison Guide
Physical dimensions
The Icepc Graphene Copper M.2 Heatsink measures 70 by 20 by 2 mm. It weighs 0.71 ounces. The Icepc 1.5mm Graphene Copper M.2 Heatsink is slightly thinner at 70 by 20 by 1.5 mm. It weighs 1.59 ounces. Both fit standard 2280 M.2 slots. The 1.5mm model is slimmer, which helps in tight laptop spaces. The 2mm model is lighter. You should check your clearance before choosing between these two physical profiles.
Material composition
Both products use copper as the base material. The Icepc Graphene Copper M.2 Heatsink lists copper as its primary material. The Icepc 1.5mm Graphene Copper M.2 Heatsink explicitly specifies copper with a graphene coating. The manufacturer claims graphene has high thermal conductivity. This coating is present on both units. The core metal is identical in both cases. You get the same base heat dissipation properties from the copper block in either option.
Mounting method
The Icepc Graphene Copper M.2 Heatsink uses an ilicone thermal pad to secure the unit. This pad helps fix the radiator on the SSD without tools. The Icepc 1.5mm Graphene Copper M.2 Heatsink uses an adhesive thermal pad. This also allows tool-free installation. Both methods rely on thermal interface material to attach the heatsink. The naming difference does not change the practical application for you. You simply peel and stick either unit to your drive.
Device compatibility
Both heatsinks are compatible with PS5 consoles and laptops. They fit 2280 size M.2 NVMe SSDs. The Icepc Graphene Copper M.2 Heatsink lists laptop and PS5 as compatible devices. The Icepc 1.5mm Graphene Copper M.2 Heatsink also lists laptop, PS5, and PC. Both support common SSD models like SN750 and 970 EVO. You can use either one for your gaming console or portable computer without issues.
Design features
Both units feature a slanted slot design for aesthetics. They include thermal pads to protect SSD particles. The Icepc Graphene Copper M.2 Heatsink mentions the pad prevents damage. The Icepc 1.5mm Graphene Copper M.2 Heatsink instructs you to remove a blue protective layer. This layer is likely on the adhesive side. Both designs aim for efficient air contact. The professional air duct design helps dissipate heat quickly in narrow spaces for both models.
Weight and profile
The Icepc Graphene Copper M.2 Heatsink is 0.71 ounces. The Icepc 1.5mm Graphene Copper M.2 Heatsink is 1.59 ounces. The heavier unit is also the thicker one at 2mm versus 1.5mm. This weight difference might matter for very light laptops. The thinner model offers a lower profile. You should consider if your device has limited vertical space. The lighter option may be preferable for some portable builds.
Which Icepc M.2 Heatsink Fits You
PS5 owners needing low profile
The Icepc 1.5mm Graphene Copper M.2 Heatsink measures 0.06 inches high. This slim profile fits the tight clearance inside your PS5 expansion slot. It uses an adhesive thermal pad for easy installation without tools. The copper construction with graphene coating helps dissipate heat from your NVMe SSD effectively in this confined space.
Users preferring lighter weight
The Icepc Graphene Copper M.2 Heatsink weighs only 0.71 ounces. This is significantly lighter than the 1.5mm model at 1.59 ounces. It measures 0.08 inches high and uses a silicone thermal pad to secure the radiator. The slanted slot design adds aesthetic value while maintaining efficient heat exchange for your laptop or PC SSD.
Those wanting thicker copper mass
The Icepc Graphene Copper M.2 Heatsink offers a 2 mm thickness. This provides more material mass compared to the 1.5 mm alternative. The extra copper can absorb and spread heat across a larger surface area. It includes a silicone cooling pad to protect SSD particles and extend drive life. The design suits narrow spaces where maximum thermal mass is preferred over minimal height.
The products compared
Icepc Graphene Copper M.2 Heatsink
Best for: low-profile PS5 and laptop SSD cooling
- Material
- Copper with Graphene Coating
- Compatible Device
- M.2 2280 SSD, Laptop PC
- Dimensions
- 70x20x2mm
- Mounting Type
- Silicone Thermal Pad
- Weight
- 0.71 ounces
View on Amazon: Icepc Graphene Copper M.2 Heatsink Affiliate link
This Icepc heatsink uses a copper base with a graphene coating to dissipate heat from 2280 NVMe SSDs. It measures 70x20x2mm and weighs 0.71 ounces. The design includes slanted slots and a silicone thermal pad for easy installation without tools. It fits laptops and PS5 consoles in narrow spaces. The graphene layer claims higher thermal conductivity than pure copper or aluminum alone.
Pros
- Graphene coating on copper base for heat dissipation
- Includes silicone thermal pad for tool-free installation
- Compact 70x20x2mm size fits narrow spaces
- Compatible with PS5 and laptops
Cons
- Only 2mm height limits airflow potential
- Graphene thermal conductivity claims are not verified
- No included mounting screws or brackets
Good fit if
- You need a low-profile heatsink for a PS5 or laptop
- You want a tool-free installation with a thermal pad
- You are using a 2280 NVMe SSD in a tight space
Skip if
- You require a taller heatsink for better passive cooling
- You need a heatsink with included mounting hardware
- You are using an M.2 SSD larger than 2280
Verdict: Icepc Graphene Copper M.2 Heatsink is a compact solution for users with limited vertical clearance in their PS5 or laptop. It offers a straightforward, tool-free installation for 2280 NVMe drives.
Icepc 1.5mm Graphene Copper M.2 Heatsink
Best for: PS5 and laptop M.2 cooling in tight spaces
- Material
- Copper with graphene coating
- Compatible Device
- M.2 2280 NVMe SSD, PS5, Laptop PC
- Dimensions
- 70x20x1.5mm
- Mounting Type
- Adhesive thermal pad
- Weight
- 1.59 ounces
View on Amazon: Icepc 1.5mm Graphene Copper M.2 Heatsink Affiliate link
This Icepc heatsink uses a copper base with a graphene coating to improve heat transfer. Its dimensions are 70x20x1.5mm, making it thin enough for laptops and PS5 consoles. It uses an adhesive thermal pad for tool-free mounting on 2280 NVMe SSDs. The slanted slot design helps with airflow and aesthetics. This model is a practical option for users needing a low-profile cooling solution for narrow spaces.
Pros
- Copper base with graphene coating for high thermal conductivity
- Slim 1.5mm height fits laptops and PS5
- Adhesive thermal pad allows tool-free installation
- Slanted slot design improves airflow and looks
Cons
- Adhesive mounting may not suit all SSD surfaces
- Single size option limits fit for thicker cases
- Graphene layer is a coating, not solid material
Good fit if
- You have a PS5 or laptop with tight clearance
- You want a low-profile M.2 heatsink
- You prefer tool-free installation on your SSD
Skip if
- You need a heatsink taller than 1.5mm
- You prefer screw-mounted cooling solutions
- You are using a 2230 or 2242 SSD
Verdict: Icepc 1.5mm Graphene Copper M.2 Heatsink is a slim, adhesive-mounted option for PS5 and laptop users with 2280 NVMe SSDs. It fits tight spaces but lacks screw-mount stability.
Specifications side by side
| Spec | Icepc Graphene Copper M.2 Heatsink | Icepc 1.5mm Graphene Copper M.2 Heatsink |
|---|---|---|
| Material | Copper with Graphene Coating | Copper with graphene coating |
| Compatible Device | M.2 2280 SSD, Laptop PC | M.2 2280 NVMe SSD, PS5, Laptop PC |
| Dimensions | 70x20x2mm | 70x20x1.5mm |
| Mounting Type | Silicone Thermal Pad | Adhesive thermal pad |
| Features | Thermal Pad | not stated |
| Weight | 0.71 ounces | 1.59 ounces |
| Size | 70*20*2mm | 70x20x1.5mm |
| Color | Black | not stated |
| Model | CAICEPC0008-2 | ICEPC0016-1.5 |
Frequently asked questions
Which Icepc heatsink is better for a PS5?
The Icepc 1.5mm Graphene Copper M.2 Heatsink is the better choice for PS5 users. It measures only 0.06 inches in height, providing a low-profile fit for the console's expansion slot. The standard 2mm model is slightly taller at 0.08 inches, which may not fit as comfortably in tight PS5 spaces.
Do these heatsinks work with laptops?
Yes, both models are compatible with laptops. The Icepc Graphene Copper M.2 Heatsink and the 1.5mm version are listed as suitable for laptop use. They are designed for 2280 NVMe drives, making them versatile options for cooling M.2 SSDs in portable computers with limited internal space.
What material do these Icepc heatsinks use?
Both heatsinks use copper as their primary material. This metal is chosen for its high thermal conductivity, helping to draw heat away from your M.2 SSD. The product names also indicate a graphene coating, which further aids in dissipating heat efficiently across the surface of the drive.
How thick is the Icepc 1.5mm model?
The Icepc 1.5mm Graphene Copper M.2 Heatsink has a thickness of 1.5 mm. In inches, this is approximately 0.06 inches. This slim profile is specifically designed to fit into narrow gaps, such as those found in PS5 expansion bays or laptop chassis, where vertical clearance is limited.
Is the standard Icepc heatsink thicker than the 1.5mm version?
Yes, the standard Icepc Graphene Copper M.2 Heatsink is thicker. It measures 2 mm in height, or 0.08 inches. This makes it slightly bulkier than the 1.5mm variant, which is only 0.06 inches high. You should choose the thinner model if your device has very tight space constraints.
Do these heatsinks include thermal pads?
The Icepc Graphene Copper M.2 Heatsink explicitly lists a thermal pad as a feature. The 1.5mm model relies on adhesive mounting, which typically involves a pre-applied thermal interface material. These pads ensure direct contact between the copper heatsink and your SSD to transfer heat effectively.
What size M.2 drives do these fit?
Both heatsinks are designed for 2280 NVMe drives. This is the standard size for most modern M.2 SSDs, measuring 22 mm in width and 80 mm in length. The heatsinks themselves are 70 mm long, covering the main controller area of the drive to maximize cooling efficiency.