Akasa 26.9mm Low-Profile LGA 1700 Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This akasa aluminium intel lga1700 mini itx review focuses on a cooler built for tight spaces. The Akasa 26.9mm Low-Profile LGA 1700 Cooler is a specialized air cooler designed for small form factor systems. Its defining specs are a maximum heat sink height of 26.9 mm and a 75 mm PWM fan. It targets processors with up to 35W TDP. The unit uses an aluminum core and features tool-free push-pin assembly for LGA1700 sockets. This guide explains how these specifications impact your build and whether this compact solution fits your needs.
What stands out
- 26.9 mm low-profile tower design fits small cases
- 75 mm PWM fan for compact airflow
- Aluminum core and base for heat dissipation
- Tool-free push-pin assembly for LGA1700 installation
- Pre-installed thermal interface for easy setup
Who it fits
Good fit for
You should consider this cooler if you are building a Mini-ITX, Cube, or HTPC case where space is limited. It is suitable for Intel LGA1700 processors with a TDP of 35W or less. The low height allows it to fit inside low-profile chassis that cannot accommodate standard towers. If your system prioritizes compact dimensions over extreme cooling headroom, this aluminum solution provides a straightforward, tool-free installation for your specific socket.
Who should skip it
You should look elsewhere if your CPU exceeds 35W TDP. This cooler is not designed for high-power Core i9 processors under heavy sustained loads. The 75 mm fan size limits airflow compared to larger 120 mm or 140 mm units. If you need maximum cooling performance for gaming or rendering, this low-profile design will likely struggle to maintain optimal temperatures. The aluminum construction also offers less thermal mass than copper alternatives.
Verdict: This cooler is a practical choice for low-TDP LGA1700 builds in constrained Mini-ITX cases. It prioritizes fitment and ease of installation over high-end cooling performance.
Key specs explained for this cooler
Cooler Height: 26.9 mm
This measurement defines the vertical space the unit requires inside your case. You need this clearance to ensure the cooler fits between the CPU and the side panel. It is ideal for Mini-ITX and HTPC cases where standard towers are too tall. Compare this low profile against traditional air coolers that often exceed 150 mm to understand the space savings.
Fan Size: 75 mm
The included fan measures 75 millimeters across. Smaller fans typically spin faster to move the same amount of air, which can increase noise levels. This size is chosen to fit the low-profile design while maintaining adequate airflow. When shopping, note that larger 120 mm fans often offer better efficiency and quieter operation for standard ATX cases.
TDP Rating: 35 W
This rating indicates the thermal power the cooler is designed to dissipate. It targets processors with a Thermal Design Power of up to 35 watts. This suits low-power chips, often found in compact builds or energy-efficient systems. High-performance Core i9 processors usually exceed this limit, so you must verify your specific CPU's TDP before relying on this rating for cooling needs.
Socket Compatibility: LGA1700
This cooler is engineered specifically for Intel LGA1700 motherboards. It includes the necessary mounting hardware to secure firmly to this socket type. You cannot install it on AMD sockets or older Intel platforms without adapters, which are not mentioned here. Check your motherboard socket before purchasing to ensure physical compatibility with your system.
Build materials and physical layout
The listing specifies an aluminum heat sink core. This material choice keeps the unit lightweight while providing necessary surface area for heat dissipation. The cooler measures 3.35 inches in width, 3.43 inches in length, and 1.06 inches in height. These dimensions confirm its classification as a low-profile tower design. The total weight is 5.86 ounces. This low mass reduces stress on the motherboard socket, which is critical for Mini-ITX and HTPC cases where structural support can be limited.
The unit features a black finish on its aluminum components. It includes a 75 mm PWM fan integrated into the assembly. The push pin mounting system is tool-free and adjustable. This design ensures a reliable grip on Intel LGA 1700 sockets without requiring additional brackets or screws. The base is enlarged to improve contact with the CPU integrated heat spreader. A thermal interface is pre-installed, which simplifies initial setup.
According to the listing, this compact layout is optimized for systems with strict height restrictions. The small footprint allows it to fit inside Cube, Mini-ITX, and Thin Mini-ITX chassis. You do not need to worry about RAM clearance or case side panel interference due to the minimal vertical profile. The design prioritizes space efficiency over maximum cooling potential, making it suitable for processors with a TDP rating up to 35 W.
Installation and daily operation
Setting up this cooler involves using the included push-pin mounting system. The listing describes these as adjustable and tool-free. You align the pins with the LGA1700 socket holes on your motherboard. This method ensures a reliable grip without requiring additional hardware. The design targets Mini-ITX and HTPC cases, so you must verify your case supports a maximum heat sink height of 26.9 mm. The unit is compatible with common desktop motherboards including ATX, Micro-ATX, and Thin Mini-ITX formats. Pre-installed thermal interface material is present on the base. This simplifies the initial setup by removing the need to apply paste separately. In daily use, the cooler relies on a 75 mm PWM fan. This fan size is optimized for low-profile airflow within small chassis. The aluminum core dissipates heat from processors up to 35 W TDP. This rating suggests the unit is suitable for low-power Core i9 processors or similar chips. You should ensure your system does not exceed this thermal design power limit for stable operation. The black aluminum construction keeps the weight at 5.86 ounces. This light weight reduces stress on the motherboard socket during transport or vibration. The compact dimensions of 3.35 by 3.43 inches allow it to fit in tight spaces where larger air coolers cannot. You benefit from a straightforward installation process and a cooling solution tailored for small form factor builds.
Before you buy this cooler
You need to verify your case dimensions carefully. The 26.9 mm height is strict. Any RAM modules taller than this clearance will block the heat sink. You should check your motherboard manual for LGA1700 socket support. The listing confirms compatibility with ATX, Micro-ATX, Mini-ITX, and Thin Mini-ITX boards. However, you must ensure your specific board uses the correct mounting holes. This unit is rated for 35 W TDP. It suits low-power Core i9 processors or efficient i3/i5 chips. It is not a high-wattage solution. You will need to manage airflow within your small form factor case. Proper intake and exhaust fans are essential. This cooler sits alongside other low-profile options. It offers a dedicated aluminum core for its size. You get a pre-installed thermal interface. This simplifies the initial setup. You do not need to buy extra paste. Focus on space constraints first. This cooler is a niche tool for tight builds, not a universal upgrade.
Check before you buy
- Check RAM height against 26.9 mm clearance
- Confirm motherboard supports LGA1700 socket
- Verify processor TDP is 35 W or lower
- Ensure case fits Mini-ITX or SFF form factor
- Check available airflow for small chassis
The product at a glance
Akasa 26.9mm Low-Profile LGA 1700 Cooler
Best for: Low-power LGA1700 Mini-ITX systems
- Socket Compatibility
- LGA1700
- Cooler Height
- 26.9 mm
- Tower Design
- Low-Profile
- Fan Size
- 75 mm
- TDP Rating
- 35 W
- System Type
- ITX
View on Amazon: Akasa 26.9mm Low-Profile LGA 1700 Cooler Affiliate link
This Akasa cooler is designed for LGA1700 sockets in Mini-ITX and HTPC cases. Its 26.9 mm height fits tight spaces. It handles up to 35W TDP processors, including Core i9 chips. The aluminum core uses a 75 mm PWM fan. It includes pre-installed thermal paste and tool-free push pins for easy mounting on compatible motherboards.
Pros
- 26.9 mm height fits low-profile cases
- LGA1700 socket compatibility
- 35W TDP rating for efficient cooling
- 75 mm PWM fan for airflow control
- Tool-free push pin installation system
Cons
- 35W TDP limit restricts high-power CPUs
- 75 mm fan size may limit noise performance
- Aluminum core offers less heat capacity than copper
Good fit if
- You need a cooler under 30 mm height
- You use an LGA1700 Mini-ITX build
- Your processor draws 35W or less
Skip if
- You run a high-TDP CPU over 35W
- You require a copper heat sink core
- You need a standard tower cooler design
Verdict: Akasa 26.9mm LGA1700 Low-Profile Cooler is a compact solution for small form factor builds. It suits users with low-power LGA1700 processors who prioritize case compatibility over maximum cooling headroom.
Specifications side by side
| Spec | Akasa 26.9mm Low-Profile LGA 1700 Cooler |
|---|---|
| Socket Compatibility | LGA1700 |
| Cooler Height | 26.9 mm |
| Tower Design | Low-Profile |
| Fan Size | 75 mm |
| TDP Rating | 35 W |
| System Type | ITX |
| Material | Aluminum |
| Features | Fan |
| Dimensions | 3.43 × 3.35 × 1.06 inches |
| Weight | 5.86 ounces |
| Color | Black |
| Model | AK-CC6601EP01 |
Frequently asked questions
Is the Akasa 26.9mm cooler suitable for high-end gaming CPUs?
No, it is not designed for high-end gaming processors. The product data specifies it is best for low-power LGA1700 systems. It prioritizes case compatibility over maximum cooling headroom. You should only use this unit with CPUs that have a low thermal design power. High-performance chips will likely overheat due to the limited surface area of the aluminum heat sink.
What mounting system does this Akasa cooler use for LGA1700?
This cooler uses a push-pin mounting system for installation. The listing describes these pins as adjustable and tool-free. You simply align the pins with the LGA1700 socket holes on your motherboard. This method ensures a reliable grip without requiring additional hardware or complex tools during the setup process.
Does the Akasa AK-CC6601EP01 include a fan?
Yes, the product attributes list a fan as a included feature. The model number AK-CC6601EP01 corresponds to this specific low-profile unit. You do not need to purchase a separate fan separately for basic operation. The fan is integrated into the aluminum heat sink design to provide necessary airflow for the small form factor system.
How heavy is the Akasa 26.9mm LGA1700 cooler?
The cooler weighs 5.86 ounces according to the provided specifications. This light weight is due to the aluminum construction of the heat sink. The compact dimensions of 3.35 inches in width and 3.43 inches in length contribute to this low mass. This makes it easy to handle during installation in tight Mini-ITX cases.
Can I use this cooler with non-LGA1700 sockets?
No, the specifications explicitly state socket compatibility is limited to LGA 1700. The mounting system is designed specifically for this Intel socket type. You cannot install this unit on AMD platforms or older Intel sockets like LGA115x. You must verify your motherboard supports LGA1700 before attempting any installation.
What color is the Akasa low-profile cooler?
The cooler is black in color. This is listed in the detailed specs section of the product data. The black finish matches the aluminum heat sink and the included fan. This aesthetic choice is common for Mini-ITX builds where visual consistency inside small cases is important.
Is this cooler compatible with Mini-ITX cases?
Yes, it is explicitly designed for ITX system types. The 26.9 mm height allows it to fit in many small form factor cases. You must verify your specific case supports a cooler height of at least 26.9 mm. It is an ideal solution for users prioritizing compact builds over maximum cooling performance.