Akasa ALUCIA H6LS M2 Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This akasa alucia h6ls m2 review covers a low-profile CPU cooler designed for compact builds. It stands out with a height of just 67.2mm and a 120mm fan. The unit uses six copper heat pipes to handle CPUs up to 150W TDP. It fits Intel LGA1851, LGA1700, and AMD AM5 sockets. The slim design helps maintain RAM clearance in small form factor cases. You get PWM speed control and hydro dynamic bearing technology. This cooler focuses on fitting into tight spaces without sacrificing basic thermal performance for mid-range processors.
What stands out
- 67.2mm total height for low-profile cases
- Six copper heat pipes for heat dissipation
- 150W TDP rating for compatible CPUs
- 120mm fan with 700-2000 RPM speed range
- Compatible with LGA1851, LGA1700, and AM5 sockets
Who it fits
Good fit for
You should choose this cooler if you are building a mini ITX or small form factor PC. The 67.2mm height ensures it fits in cases with strict CPU clearance limits. The 150W TDP rating makes it suitable for mid-range processors that do not require massive cooling solutions. It also works well if you need full access to RAM slots, as the low-profile design avoids blocking memory. The included mounting kit supports modern Intel and AMD platforms for easy installation.
Who should skip it
You should skip this option if you run high-end CPUs with TDPs exceeding 150W. The low-profile tower design and single 120mm fan cannot provide the cooling capacity needed for extreme overclocking or high-wattage chips. If you require significantly lower noise levels under heavy loads, this fan’s 2000 RPM maximum may not be sufficient for silent operation. It is also not ideal for standard mid-tower cases where height is not a constraint, as larger coolers would offer better thermal performance.
Verdict: This cooler is a practical choice for compact builds with mid-range processors. It delivers adequate cooling for 150W TDP CPUs in tight spaces.
Akasa ALUCIA H6LS M2 Key Specs
Cooler Height: 67.2mm
This slim profile allows the cooler to fit inside small form factor cases where space is limited. You can build compact systems without worrying about clearance issues. Compare this measurement to standard tower coolers that often exceed 150mm. A lower height is essential for mini ITX builds or cases with low side panels. It ensures your case closes properly while maintaining adequate airflow for your components.
Fan Size: 120mm
A 120mm fan moves more air than smaller fans while spinning at lower speeds. This results in quieter operation and better heat dissipation. You benefit from efficient cooling without high noise levels. When shopping, compare this to 80mm or 92mm fans found in other low-profile units. Larger fans generally provide better thermal performance per watt of power consumed, making them a practical choice for sustained workloads.
Heat Pipes: 6
Six copper heat pipes transfer heat from the CPU to the aluminum fins quickly. This setup helps maintain lower temperatures under load. You get reliable performance for mid-range processors. Compare this count to coolers with only four pipes. More pipes typically mean better heat spreading across the fin stack. This is a key spec for ensuring your CPU stays cool during intensive tasks like gaming or rendering.
TDP Rating: 150W
This rating indicates the cooler can handle CPUs with a Thermal Design Power up to 150 watts. You can use it with high-performance processors without overheating. Compare this limit to other low-profile coolers that may cap at 100W or 120W. A higher TDP rating suggests robust thermal capability. Ensure your specific CPU model falls within this range for optimal cooling efficiency and system stability.
Design and Build Quality
According to the listing, the Akasa ALUCIA H6LS M2 uses a low-profile tower design with a nickel-plated copper base. This base supports CPUs up to 150W TDP. The cooler includes six high-efficiency copper heat pipes. Copper transfers heat quickly, which helps manage thermal loads in tight spaces. The base material ensures direct contact with the CPU for efficient heat transfer.
The unit measures 4.72 inches wide and 4.72 inches long. It stands 67.2mm tall, which is 2.65 inches. This slim height allows it to fit inside small form factor cases. The 120mm fan adds width but remains compatible with many RAM slots. The listing states it maintains full access to all RAM slots. This layout is ideal for mini ITX builds where space is limited.
The cooler weighs 1.76 pounds. This weight provides stability without excessive bulk. The fan features damping pads to reduce vibrations. It uses a hydro dynamic bearing for smoother operation. The fan speed ranges from 700 to 2000 RPM. PWM control lets you adjust speed based on temperature. The finish and materials focus on durability and thermal performance. You get a compact solution that balances size and cooling capacity.
Setup and everyday use
Installation relies on a dedicated mounting kit for LGA1851, LGA1700, and AM5 sockets. The listing describes this process as quick and secure. You do not need to worry about complex bracket adjustments. The cooler’s low-profile design, measuring 67.2mm in height, ensures it fits within tight case constraints. This slim tower allows you to maintain full access to all RAM slots. Memory clearance is not a concern, even in compact builds. The fan itself is only 15mm tall, which further aids in fitting into small form factor cases like mini ITX setups. Daily operation is managed through PWM speed control. The fan speed ranges from 700 to 2000 RPM. This range lets you balance airflow and noise based on your CPU load. The fan uses hydro dynamic bearings, which the manufacturer states optimize lubrication. This bearing type is designed to reduce noise and extend the fan’s life to 40,000 hours. Damping pads are included to help reduce vibrations during operation. The cooler is rated for CPUs up to 150W TDP. The six copper heat pipes and nickel-plated copper base work together to dissipate heat efficiently. The listing claims a 36% cooling improvement over previous models. You can expect stable performance for high-tDP processors within the specified thermal design power limit.
Before You Buy This Cooler
Before you buy this cooler, check your case height limits. The unit stands 67.2mm tall, which fits most small form factor cases but may clash with tall RAM sticks. Verify your motherboard socket matches LGA1851, LGA1700, or AM5. The listing states it supports CPUs up to 150W TDP, so ensure your processor falls within this range for optimal performance. You will need to install the included mounting kit yourself. Regular maintenance involves dusting the copper heat pipes and fan blades to maintain airflow efficiency. This low-profile design sits alongside other air coolers in our 1 product guide. Unlike standard towers, it prioritizes compact fit over raw cooling headroom. If you prioritize case compatibility and memory clearance over extreme thermal performance, this option aligns with your build goals. Always confirm your specific RAM height before finalizing the purchase to avoid clearance conflicts.
Check before you buy
- Verify case height allows 67.2mm clearance.
- Confirm motherboard socket is LGA1700, LGA1851, or AM5.
- Check RAM height against cooler interference.
- Ensure CPU TDP does not exceed 150W.
The product at a glance
Akasa ALUCIA H6LS M2 Low-Profile Cooler
Best for: Compact builds with mid-range CPUs
- Socket Compatibility
- LGA1851, LGA1700, AM5
- Cooler Height
- 67.2mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- TDP Rating
- 150W
View on Amazon: Akasa ALUCIA H6LS M2 Low-Profile Cooler Affiliate link
The Akasa ALUCIA H6LS M2 is a 67.2mm low-profile CPU cooler designed for compact builds. It uses six copper heat pipes and a 120mm fan to handle CPUs up to 150W TDP. The 15mm fan height and optimized design ensure full RAM clearance. It supports LGA1851, LGA1700, and AM5 sockets. This unit suits users needing efficient cooling in small form factor cases.
Pros
- Six copper heat pipes for enhanced heat dissipation
- 120mm fan with PWM control from 700-2000 RPM
- 150W TDP rating for mid-range processors
- 15mm fan height preserves RAM clearance
- Supports LGA1851, LGA1700, and AM5 sockets
Cons
- 67.2mm height limits compatibility with tall RAM sticks
- 150W TDP rating may struggle with high-end CPUs
- No mention of RGB lighting or software control
Good fit if
- You are building a mini ITX or small form factor PC
- You need a low-profile cooler that does not block RAM slots
- You use a CPU with a TDP around 150W or less
Skip if
- You require a cooler for CPUs exceeding 150W TDP
- You need RGB lighting or software-based fan control
- You are using very tall RAM sticks that exceed 67.2mm clearance
Verdict: Akasa ALUCIA H6LS M2 Low-Profile Cooler is a practical solution for compact builds with mid-range CPUs. It fits users who prioritize RAM clearance and low height over maximum cooling headroom.
Specifications side by side
| Spec | Akasa ALUCIA H6LS M2 Low-Profile Cooler |
|---|---|
| Socket Compatibility | LGA1851, LGA1700, AM5 |
| Cooler Height | 67.2mm |
| Heat Pipes | 6 |
| Tower Design | Low-Profile |
| Fan Size | 120mm |
| TDP Rating | 150W |
| Fan Speed | 2000 RPM |
| Material | Copper |
| Features | Fan |
| Dimensions | 4.72 × 4.72 × 2.65 inches |
| Weight | 1.76 pounds |
| Model | AK-CC4030HP01 |
Frequently asked questions
Is the Akasa ALUCIA H6LS M2 compatible with my motherboard socket?
Yes, this cooler supports LGA1851, LGA1700, and AM5 sockets. It uses a dedicated mounting kit for quick and secure installation. You do not need complex bracket adjustments. Check your motherboard specifications to confirm it matches one of these three socket types before purchasing. This ensures proper fit and stability.
What is the maximum CPU TDP this cooler handles?
The Akasa ALUCIA H6LS M2 supports CPUs up to 150W TDP. It uses six copper heat pipes to transfer heat efficiently. This makes it suitable for mid-range processors in compact builds. You should verify your specific CPU’s power requirements to ensure they stay within this limit for optimal cooling performance.
How tall is the Akasa ALUCIA H6LS M2 cooler?
The cooler stands 2.65 inches tall, which equals 67.2mm. This low-profile design allows it to fit inside small form factor cases. You can build compact systems without worrying about clearance issues. Always check your case height limits to ensure this slim profile fits your specific chassis constraints comfortably.
Does the Akasa ALUCIA H6LS M2 include a fan?
Yes, the unit includes a 120mm fan as part of its feature set. This fan size helps move air across the six copper heat pipes. It is designed to work with the low-profile tower design. You get a complete cooling solution without needing to purchase a separate fan for basic operation.
What material is used for the heat pipes in this cooler?
The heat pipes are made of copper. Copper transfers heat quickly, which helps cool your processor efficiently. The base is also nickel-plated copper. This material choice supports the stated 150W TDP rating. You benefit from rapid heat dissipation in a compact package designed for mid-range CPUs.
Who is the best target user for this cooler?
This cooler is best for users building compact systems with mid-range CPUs. It fits those who prioritize RAM clearance and low height over maximum cooling headroom. The 120mm fan and six heat pipes provide sufficient cooling for specific use cases. You should choose this if space is your primary constraint.
How much does the Akasa ALUCIA H6LS M2 weigh?
The unit weighs 1.76 pounds. This weight is manageable for most standard mounting setups. It includes a dedicated mounting kit for LGA1851, LGA1700, and AM5 sockets. You can install it securely without worrying about excessive weight stressing the motherboard. The design balances structural integrity with a compact form factor.