Akasa 21mm Low-Profile Intel Cooler vs Akasa 26.9mm Low-Profile LGA 1700: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison looks at the akasa ak cc7129bp01 low profile intel vs aluminium intel lga1700 mini. Both units are low-profile air coolers designed for small form factor builds. They share a similar compact footprint and use PWM fans. The main difference lies in their target platforms. The first model supports older LGA775 and 115x sockets. The second is built for modern LGA1700 processors with a higher TDP rating.
Key differences
| Aspect | Akasa 21mm Low-Profile Intel Cooler | Akasa 26.9mm Low-Profile LGA 1700 Cooler |
|---|---|---|
| Socket Compatibility | LGA775, LGA1150, LGA1155, LGA1156 | LGA1700 |
| Cooler Height | 21mm | 26.9mm |
| Fan Size | 8cm | 75mm |
| TDP Rating | not listed | 35W |
| Material | not listed | Aluminum |
Which one should you choose?
Choose Akasa 21mm Low-Profile Intel Cooler if
- You are building with an older Intel socket like LGA1156
- You need the absolute lowest profile at 21mm
- You prefer a larger 8cm fan diameter
Choose Akasa 26.9mm Low-Profile LGA 1700 Cooler if
- You are using a modern LGA1700 motherboard
- You need a cooler rated for up to 35W TDP
- You want tool-free push-pin installation
Verdict: Choose the Akasa AK-CC7129BP01 if you are maintaining an older system or require the thinnest possible cooler. Pick the Akasa LGA1700 Mini if you are building a modern Mini-ITX PC with an LGA1700 processor. It offers the correct socket support and explicit thermal rating for current hardware.
Akasa Low-Profile Cooler Comparison
Socket Compatibility
Product A supports older Intel platforms, specifically LGA775, LGA1150, LGA1155, and LGA1156. It uses spring-loaded screws and includes a backplate for these legacy sockets. Product B is designed exclusively for modern Intel LGA1700 motherboards. It features tool-free push pins for easy installation on this specific socket type. If you are building with a current generation Core i9 or i7, Product B is the only choice. If you have an older system, Product A fits those boards. They do not share socket support.
Cooler Height
Product A has a total height of 21mm. This makes it extremely thin and suitable for cases with very strict RAM clearance or minimal depth. Product B stands at 26.9mm. While still low-profile, it is taller than Product A. The extra height may allow for slightly more fin surface area, but it requires more vertical space in your case. You must check your case specifications to see if it can accommodate the taller cooler. Product A wins for ultra-compact builds where every millimeter counts.
Fan Size
Product A uses an embedded 8cm PWM fan. An 8cm fan is smaller than standard 120mm or 140mm fans, which can affect airflow volume and noise levels. Product B uses a 75mm PWM fan. This is slightly smaller than the 8cm fan in Product A. Both fans are designed for low-profile applications. The 75mm fan in Product B is paired with an aluminum core optimized for higher TDP processors up to 35W. The 8cm fan in Product A is paired with a twin ball bearing for long life. Both are small fans suitable for small cases.
TDP Rating
Product B is rated for processors with a TDP up to 35W. The manufacturer explicitly states it is designed for Core i9 processors within this power limit. Product A does not list a specific TDP rating in its specifications. It is intended for older, generally lower-power processors. If you are running a modern processor that draws significant power, Product B provides a clear performance guarantee. Product A lacks this specific thermal data, making its capability with high-power chips unknown.
Weight
Product A weighs 5.43 ounces. Product B weighs 5.86 ounces. The difference is 0.43 ounces. Both coolers are lightweight, which is typical for low-profile aluminum designs. The weight difference is negligible for your system. It will not affect motherboard stress or case stability. You can choose based on other factors without worrying about the mass of the cooler. Both are light enough for Mini-ITX motherboards.
Choose the right low-profile cooler
Owner of older LGA115x or LGA775 motherboard
Product A is the only compatible option for legacy Intel sockets. It supports LGA775, LGA1150, LGA1155, and LGA1156 platforms. The 21mm height fits tight cases. It includes a backplate and pre-applied thermal paste. You get a reliable twin ball bearing fan. This cooler is built specifically for these older generations.
Builder using modern LGA1700 motherboard
Product B supports the current LGA1700 socket. It uses tool-free push pins for easy installation on modern boards. The aluminum core handles up to 35W TDP. The 26.9mm height suits Mini-ITX and HTPC cases. It includes a 75mm PWM fan and pre-installed thermal interface. This is the correct choice for new Intel 12th, 13th, and 14th Gen processors.
User needing minimal cooler height
Product A has a lower profile at 21mm. This allows it to fit inside cases with very low RAM clearance. The 8cm fan keeps the overall size small. Product B stands taller at 26.9mm. If your case height is strictly limited, the shorter cooler provides better compatibility. You avoid clearance issues with tall memory modules.
The products compared
Akasa 21mm Low-Profile Intel Cooler
Best for: Older Intel sockets in small cases
- Socket Compatibility
- LGA775, LGA1150, LGA1155, LGA1156
- Cooler Height
- 21mm
- Tower Design
- Low Profile
- Fan Size
- 8cm
- Dimensions
- 3.35 × 3.43 × 0.83 inches
- Weight
- 5.43 ounces
View on Amazon: Akasa 21mm Low-Profile Intel Cooler Affiliate link
This Akasa cooler stands just 21mm tall, making it one of the slimmest options for Intel platforms. It uses an 8cm PWM fan with twin ball bearings for steady airflow. The unit supports LGA775, LGA1150, LGA1155, and LGA1156 sockets. It includes a backplate and pre-applied thermal paste. You get a compact solution that fits in tight cases without sacrificing basic cooling performance.
Pros
- Ultra-low 21mm height for mini-ITX builds
- 8cm PWM fan with twin ball bearings
- Pre-applied thermal interface for easy setup
- Includes motherboard backplate and mounting hardware
Cons
- Limited to older Intel sockets, not LGA1700
- Small 8cm fan may run louder under load
- No support for modern LGA1700 motherboards
Good fit if
- You need a cooler under 25mm for a small case
- You are building with an older Intel socket
- You want a simple plug-and-play installation
Skip if
- You have an LGA1700 processor
- You require support for Core i9 CPUs
- You need a larger 12cm fan for silence
Verdict: Akasa 21mm Low Profile Intel Cooler fits older Intel builds where space is tight. It does not work for LGA1700 systems.
Akasa 26.9mm Low-Profile LGA 1700 Cooler
Best for: Low-profile Mini-ITX Intel LGA 1700 builds
- Socket Compatibility
- LGA1700
- Cooler Height
- 26.9 mm
- Tower Design
- Low-Profile
- Fan Size
- 75 mm
- TDP Rating
- 35 W
- System Type
- ITX
View on Amazon: Akasa 26.9mm Low-Profile LGA 1700 Cooler Affiliate link
This Akasa cooler is an aluminum low-profile solution designed for Intel LGA 1700 sockets. It stands 26.9 mm tall, making it suitable for Mini-ITX and HTPC cases. The unit includes a 75 mm PWM fan and supports processors with a TDP up to 35 W. It uses a tool-free push-pin mounting system for easy installation. The compact design ensures it fits in small form factor builds without obstructing other components.
Pros
- 26.9 mm height fits low-profile cases
- Supports Intel LGA 1700 sockets
- 75 mm PWM fan included
- Tool-free push-pin assembly
- Aluminum heat sink core
Cons
- Limited to 35 W TDP processors
- Only supports LGA 1700 sockets
- Aluminum construction may have lower heat capacity than copper
Good fit if
- You need a cooler under 30 mm tall
- You are building a Mini-ITX system
- Your CPU has a TDP of 35 W or less
Skip if
- You have a CPU exceeding 35 W TDP
- You use an AMD socket
- You need a cooler taller than 26.9 mm
Verdict: Akasa 26.9mm Low-Profile LGA 1700 is a compact cooling option for Intel LGA 1700 builds. It fits users who prioritize case height limits and have low-power processors under 35 W.
Specifications side by side
| Spec | Akasa 21mm Low-Profile Intel Cooler | Akasa 26.9mm Low-Profile LGA 1700 Cooler |
|---|---|---|
| Socket Compatibility | LGA775, LGA1150, LGA1155, LGA1156 | LGA1700 |
| Cooler Height | 21mm | 26.9 mm |
| Tower Design | Low Profile | Low-Profile |
| Fan Size | 8cm | 75 mm |
| TDP Rating | not stated | 35 W |
| System Type | not stated | ITX |
| Material | not stated | Aluminum |
| Features | not stated | Fan |
| Dimensions | 3.35 × 3.43 × 0.83 inches | 3.43 × 3.35 × 1.06 inches |
| Weight | 5.43 ounces | 5.86 ounces |
| Model | AK-CC7129BP01 | AK-CC6601EP01 |
| Color | not stated | Black |
Frequently asked questions
Can I use the Akasa 21mm cooler on an LGA 1700 motherboard?
No, the Akasa 21mm Low-Profile Intel Cooler is not compatible with LGA 1700 sockets. It is designed specifically for older Intel platforms. You should choose the 26.9mm model if you are building with modern Intel hardware. The 21mm unit fits legacy sockets like LGA 115x.
What is the height difference between these two Akasa coolers?
The Akasa 21mm cooler stands 0.83 inches tall. The Akasa 26.9mm LGA 1700 cooler is slightly taller at 1.06 inches. Both designs remain low-profile to fit inside small cases. You should check your case height limits before purchasing either unit.
Which cooler is better for a Mini-ITX LGA 1700 build?
The Akasa 26.9mm Low-Profile LGA 1700 Cooler is the correct choice for Mini-ITX systems with modern Intel CPUs. It supports the LGA 1700 socket exclusively. It fits users who prioritize case height limits and have low-power processors under 35 W.
Do these coolers include fans in the box?
Yes, the Akasa 26.9mm LGA 1700 Cooler includes a fan as a standard feature. The product data confirms it is a fan-equipped unit. Both models are air coolers that rely on PWM fans for operation. You do not need to buy a fan separately for either option.
How much does the Akasa 26.9mm LGA 1700 cooler weigh?
The Akasa 26.9mm LGA 1700 Cooler weighs 5.86 ounces. It is constructed from aluminum material. This weight is slightly higher than the older 21mm model. The compact size makes it suitable for tight spaces in small form factor builds.
Is the Akasa 21mm cooler suitable for high-performance gaming PCs?
This cooler is best for older Intel sockets in small cases. It is not designed for high-performance gaming PCs with modern LGA 1700 processors. The 26.9mm model is intended for low-power processors under 35 W. You should verify your CPU thermal design power before selecting either unit.
What are the dimensions of the Akasa 21mm Intel cooler?
The Akasa 21mm Low-Profile Intel Cooler measures 3.43 inches in width, 0.83 inches in height, and 3.35 inches in length. It weighs 5.43 ounces. These compact dimensions allow it to fit into very tight computer cases. Check your case clearance before installation.
Can I use the LGA 1700 cooler on an LGA 1155 motherboard?
No, the Akasa 26.9mm LGA 1700 Cooler is designed exclusively for LGA 1700 motherboards. It will not fit older platforms like LGA 1155. You must use the Akasa 21mm model for legacy sockets such as LGA 775, LGA 1150, LGA 1155, and LGA 1156.