Akasa 92mm Copper Core CPU Cooler vs Akasa Low-Profile LGA1700 ITX CPU Cooler (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison of the akasa 92mm copper core CPU cooler vs low profile lga1700 itx CPU cooler highlights two distinct air cooling solutions from Akasa. Both units use copper cores for efficient heat transfer and include PWM fans for speed control. The main difference lies in their form factor and target system. One is a standard tower designed for general desktops, while the other is a compact, low-profile unit built specifically for small form factor cases like Mini-ITX.
Key differences
| Aspect | Akasa 92mm Copper Core CPU Cooler | Akasa Low-Profile LGA1700 ITX CPU Cooler |
|---|---|---|
| Tower Design | Standard Tower | Low-Profile |
| Socket Compatibility | LGA 1200/1151/1150/1155/1156/775 | LGA1700 |
| TDP Rating | 115W | 73W |
| Fan Size | 92mm | 74mm |
| Height | 2.44 inches | 1.18 inches |
Which one should you choose?
Choose Akasa 92mm Copper Core CPU Cooler if
- You need a cooler for standard ATX or Micro-ATX cases with ample height clearance.
- You are using older Intel sockets like LGA 115x or LGA 775.
- You require higher thermal performance up to 115W TDP.
Choose Akasa Low-Profile LGA1700 ITX CPU Cooler if
- You are building a Mini-ITX or Small Form Factor system with strict height limits.
- You are using a modern LGA1700 socket.
- You have a CPU with a lower TDP rating around 73W.
Verdict: The Akasa 92mm Copper Core is the practical choice for standard desktop builds requiring broader socket support and higher thermal headroom. The Akasa Low-Profile LGA1700 ITX Cooler is the necessary solution for compact cases where vertical clearance is limited to just over an inch.
Akasa 92mm vs Low Profile Comparison
Socket Compatibility
The Akasa 92mm Copper Core supports a wide range of older Intel sockets, including LGA 1200, 1151, 1150, 1155, 1156, and 775. It also offers a specific variation for LGA1700 and LGA1851. In contrast, the Akasa Low-Profile LGA1700 ITX CPU Cooler is designed exclusively for the LGA1700 socket. If you are building with a modern LGA1700 motherboard, the low-profile unit is the direct fit. For users with legacy platforms like LGA 115x or LGA 775, the 92mm model is the only viable option among these two. This makes the 92mm cooler more versatile for older systems.
Tower Design
Physical dimensions dictate which case these coolers can fit into. The Akasa 92mm Copper Core measures 3.74 inches in width and length, with a height of 2.44 inches. This standard tower profile requires a mid-tower or full-tower case with sufficient clearance. The Akasa Low-Profile LGA1700 ITX CPU Cooler is significantly shorter at 1.18 inches (29.92mm). This compact height is critical for Mini-ITX, Cube, and HTPC cases where space is extremely limited. If you are building a small form factor PC, the low-profile design is essential. The 92mm model is too tall for such enclosures.
TDP Rating
Thermal Design Power ratings indicate the maximum heat output a cooler can handle. The Akasa 92mm Copper Core CPU Cooler is rated for up to 115W TDP. This higher rating suggests it can manage the heat from more powerful processors, such as high-end i9 or i7 chips under heavy load. The Akasa Low-Profile LGA1700 ITX CPU Cooler is rated for 73 TDP. This lower limit makes it suitable for mid-range processors or systems where power consumption is capped. If you plan to run high-performance CPUs that generate significant heat, the 92mm model offers greater thermal headroom.
Fan Size
Fan diameter influences airflow volume and noise levels. The Akasa 92mm Copper Core features a 92mm PWM fan. Larger fans generally move more air at lower speeds, which can result in quieter operation under normal workloads. The Akasa Low-Profile LGA1700 ITX CPU Cooler uses a 74mm PWM fan. While smaller, this fan is optimized for the compact heatsink design. Both units offer PWM control, allowing the fan speed to adjust based on CPU temperature. The 92mm fan likely provides better acoustic efficiency due to its size, while the 74mm fan is a necessary compromise for low-profile builds.
System Type
These coolers target different system categories. The Akasa 92mm Copper Core is designed for standard desktop motherboards, including ATX and Micro-ATX formats. It is ideal for general-purpose PCs where case size is not a primary constraint. The Akasa Low-Profile LGA1700 ITX CPU Cooler is explicitly built for Mini-ITX, Thin Mini-ITX, and other small form factor systems. It supports Cube and HTPC cases. If your build relies on a compact motherboard layout, the low-profile cooler is the required choice. The 92mm model is better suited for traditional desktop towers.
Weight
Heatsink weight can affect motherboard stability, especially on lighter ITX boards. The Akasa 92mm Copper Core CPU Cooler weighs 12.3 ounces. This heavier mass may require robust mounting solutions on standard ATX boards. The Akasa Low-Profile LGA1700 ITX CPU Cooler weighs 9.03 ounces. The lighter weight is advantageous for Mini-ITX motherboards, which often have less structural rigidity and fewer mounting points. A lighter cooler reduces stress on the PCB. For users concerned about sag or strain on small form factor boards, the lower weight of the low-profile unit is a practical benefit.
Which Akasa Cooler Fits Your Build
Small form factor PC builders
Choose the low-profile model for Mini-ITX cases. Its 1.18-inch height fits tight spaces. The 73W TDP rating suits efficient processors. It uses tool-free push-pins for easy installation on LGA1700 sockets. This compact design ensures compatibility with small chassis without sacrificing basic cooling needs.
Users with older Intel platforms
Select the 92mm cooler if you use LGA 115x or LGA 775 sockets. It supports up to 115W TDP. The 92mm PWM fan adjusts speed based on CPU load. This model offers broad socket compatibility for legacy systems. Its rolling bearing promises a lifespan of up to 40,000 hours for reliable long-term use.
Those needing higher thermal headroom
Pick the 92mm version for higher power demands. It handles 115W TDP, which exceeds the low-profile model's 73W limit. The larger 92mm fan and omni-directional heatsink design improve airflow. This cooler is better suited for heavier workloads on compatible older Intel sockets. It provides superior cooling capacity for more powerful processors.
The products compared
Akasa 92mm Copper Core CPU Cooler
Best for: older Intel CPUs requiring quiet cooling
- Socket Compatibility
- LGA 1200/1151/1150/1155/1156/775
- Fan Size
- 92mm
- TDP Rating
- 115W
- Material
- Copper
- Features
- Fan
- Dimensions
- 3.74 × 3.74 × 2.44 inches
View on Amazon: Akasa 92mm Copper Core CPU Cooler Affiliate link
This Akasa cooler uses a 92mm PWM fan and a copper core base to handle up to 115W TDP. It features a 3.74-inch width and 2.44-inch height. The design includes an omni-directional heatsink for broad cooling coverage. It supports multiple Intel sockets including LGA 1200 and LGA 775. You get reliable rolling bearing technology rated for 40,000 hours. This unit is built for standard desktop cases where low noise is a priority.
Pros
- Copper core base for efficient heat transfer
- 92mm PWM fan adjusts speed based on CPU load
- Rolling bearing rated for 40,000 hours of use
- Intel-approved pushpins for simple installation
- Supports Intel sockets from LGA 775 to LGA 1200
Cons
- 92mm fan size is smaller than standard 120mm or 140mm alternatives
- Limited socket compatibility that excludes modern LGA 1700
- 115W TDP rating may limit performance on high-end processors
Good fit if
- You need a low-noise cooling solution for older Intel platforms
- You have a standard ATX case with ample clearance
- You are building a budget-friendly system with mid-range CPUs
Skip if
- You are using an LGA 1700 motherboard
- You require support for high-TDP processors above 115W
- You prefer larger fans for quieter operation at higher loads
Verdict: Akasa 92mm Copper Core CPU Cooler provides solid cooling for older Intel systems with a focus on quiet operation. It is a practical fit for users sticking with LGA 1200 or earlier sockets who value simplicity and reliability over raw performance metrics.
Akasa Low-Profile LGA1700 ITX CPU Cooler
Best for: Mini-ITX cases with low-TDP CPUs
- Socket Compatibility
- LGA1700
- Cooler Height
- 29.92mm
- Tower Design
- Low-Profile
- TDP Rating
- 73 TDP
- System Type
- ITX
- Material
- Copper, Aluminum
View on Amazon: Akasa Low-Profile LGA1700 ITX CPU Cooler Affiliate link
This Akasa cooler features a 29.92mm low-profile design with an aluminum heatsink and copper core. It is rated for 73 TDP and uses tool-free push-pin mounting for LGA1700 sockets. The compact build suits Mini-ITX, Cube, and HTPC cases. It supports ATX, Micro-ATX, and Thin Mini-ITX motherboards. You get reliable retention and effective heat dissipation in a small form factor system.
Pros
- 29.92mm low-profile height for SFF cases
- Aluminum heatsink with copper core
- Tool-free push-pin mounting for LGA1700
- Rated for 73 TDP
Cons
- 73 TDP limit restricts high-end CPUs
- Aluminum heatsink conducts heat slower than copper
- No PWM fan included in specifications
Good fit if
- You build a Mini-ITX or Cube case
- You use a low-TDP LGA1700 processor
- You need tool-free installation on LGA1700
Skip if
- You run a high-TDP Core i9 processor
- You require a taller tower for better cooling
- You need a PWM fan included
Verdict: Akasa Low-Profile LGA1700 ITX Cooler fits small cases with low-TDP LGA1700 CPUs. It offers easy mounting and compact dimensions for ITX builds.
Specifications side by side
| Spec | Akasa 92mm Copper Core CPU Cooler | Akasa Low-Profile LGA1700 ITX CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA 1200/1151/1150/1155/1156/775 | LGA1700 |
| Cooler Height | not stated | 29.92mm |
| Tower Design | not stated | Low-Profile |
| Fan Size | 92mm | not stated |
| TDP Rating | 115W | 73 TDP |
| System Type | not stated | ITX |
| Material | Copper | Copper, Aluminum |
| Features | Fan | Fan |
| Dimensions | 3.74 × 3.74 × 2.44 inches | 3.43 × 3.35 × 1.18 inches |
| Weight | 12.3 ounces | 9.03 ounces |
| Model | AK-959CU | AK-CC6602HP01 |
| Color | not stated | Black |
Frequently asked questions
Can the Akasa 92mm Copper Core cooler fit in a standard mid-tower case?
Yes, it fits standard cases easily. Its dimensions are 3.74 by 3.74 by 2.44 inches. This size allows clearance for most RAM sticks. It is designed for older Intel sockets like LGA 1200 and 775. The 12.3-ounce weight ensures stable mounting. You do not need to worry about height restrictions in typical builds.
Is the Akasa Low-Profile cooler suitable for LGA1700 motherboards?
Yes, it is built for LGA1700 systems. It supports Mini-ITX cases with low-TDP CPUs. The cooler uses tool-free push-pins for installation. This makes setup quick on modern Intel platforms. It is not intended for high-power processors. It focuses on compact efficiency for small form factor builds.
What is the height difference between these two Akasa coolers?
The height difference is significant. The 92mm Copper Core is 2.44 inches tall. The Low-Profile model is only 1.18 inches tall. This makes the Low-Profile version ideal for tight spaces. The 92mm model offers more height for potential airflow. Choose based on your case clearance limits.
Which cooler is lighter and better for portability?
The Akasa Low-Profile cooler is lighter. It weighs 9.03 ounces. The 92mm Copper Core weighs 12.3 ounces. The lower weight of the Low-Profile unit aids in small builds. It is easier to handle during installation. Both use copper for heat dissipation. The lighter option is preferred for minimalistic setups.
Does the Akasa 92mm cooler support the latest Intel sockets?
It primarily supports older sockets. The main model lists LGA 1200 and 775. A specific variation exists for LGA1700 and LGA1851. However, the standard unit is best for legacy systems. If you have a modern motherboard, check the specific variant. The Low-Profile model is explicitly designed for LGA1700 compatibility.
Are both coolers made with copper heat sinks?
Yes, both use copper cores. The 92mm model is listed as Copper. The Low-Profile model uses Copper and Aluminum. Copper provides efficient heat transfer from the CPU. This material choice helps maintain stable temperatures. Both units rely on this core for performance. The Low-Profile adds aluminum fins for surface area.
Which cooler is better for a quiet office PC?
The Akasa 92mm Copper Core is ideal for quiet use. It is best for older Intel CPUs requiring quiet cooling. Its larger fan size allows lower RPMs. This reduces noise output effectively. The Low-Profile model is for low-TDP chips. If you need silence with older hardware, the 92mm model is the practical choice.