WSHAITE Wraith Stealth AM4 AM5 vs WSHAITE AM4/AM5 Aluminum Replacement Fan: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This comparison covers the wshaite wraith stealth am4 am5 vs am4 am5 aluminum replacement fan. Both units are aluminum fans designed for AM4 and AM5 sockets. They share the same brand and basic material. The main difference lies in their physical dimensions and weight. One is a full cooler assembly, while the other is a smaller replacement fan. You need to check the size data to decide which fits your build.
Key differences
| Aspect | WSHAITE Wraith Stealth AM4 AM5 | WSHAITE AM4/AM5 Aluminum Replacement Fan |
|---|---|---|
| Width | 3.5 inches | 1.8 inches |
| Height | 2 inches | 1.5 inches |
| Length | 3.5 inches | 1.8 inches |
| Weight | 2.82 ounces | 1.23 ounces |
Which one should you choose?
Choose WSHAITE Wraith Stealth AM4 AM5 if
- You need a complete cooling solution with a larger heatsink surface area for better heat dissipation.
- You are building a new system or replacing an entire stock cooler assembly on an AM4 or AM5 motherboard.
- You prefer a heavier unit that may offer more thermal mass for consistent cooling during light workloads.
Choose WSHAITE AM4/AM5 Aluminum Replacement Fan if
- You only need to replace a broken or noisy fan on an existing Wraith Stealth cooler.
- You want a lighter component that is easier to handle during installation or repair.
- You are looking for a compact fan that fits into a tighter space or replaces just the airflow component.
Verdict: Choose the Wraith Stealth AM4 AM5 if you require a full cooler unit with a larger heatsink for general cooling needs. Pick the AM4/AM5 Aluminum Replacement Fan if you simply need to swap out a faulty fan on an existing setup. Both serve their specific roles effectively within the AMD ecosystem.
Size, Weight, and Build Specs
Physical Dimensions
Product A, the WSHAITE Wraith Stealth AM4 AM5, measures 3.5 inches in width, 2 inches in height, and 3.5 inches in length. Product B, the WSHAITE AM4/AM5 Aluminum Replacement Fan, is significantly smaller at 1.8 inches wide, 1.5 inches high, and 1.8 inches long. The larger footprint of Product A suggests a more substantial heatsink surface area, which typically aids in heat dissipation. Product B’s compact size makes it ideal for tight cases or as a direct replacement for stock coolers where space is limited. You should choose based on your case clearance and thermal needs.
Weight
Weight differs notably between these two units. Product A weighs 2.82 ounces, while Product B is lighter at 1.23 ounces. The heavier weight of Product A often indicates more aluminum mass in the heatsink, which can store and dissipate heat more effectively over time. Product B’s lighter construction aligns with its smaller dimensions. If you are building a system where cooler weight stresses the motherboard socket, Product B places less load on the CPU mount. However, for pure cooling capacity, the extra mass in Product A is generally beneficial.
Socket Compatibility
Both products share the same socket compatibility specifications. Product A and Product B both support AM4 and AM5 sockets. This means either unit can be installed on modern AMD Ryzen processors, including the Ryzen 5 9600, Ryzen 7 8700F, and Ryzen 5 5600X series. Since both are designed for these platforms, you do not need to worry about mounting bracket compatibility differences between the two. They are interchangeable from a socket perspective, allowing you to decide based on size, weight, and intended use rather than motherboard support.
Material and Build
Both coolers are constructed from aluminum, as listed in their attributes. Product A features an aluminum heatsink with optimized fins and a fan designed for efficient heat dissipation. Product B also uses an aluminum heatsink and includes curved fan blades to boost airflow efficiency. Both rely on aluminum for thermal conductivity. The build quality of Product A is described as matching standards for daily use and light overclocking. Product B emphasizes a long-lasting MFDB bearing and braided power cable for durability. Both offer reliable aluminum construction for their respective form factors.
Fan and Noise Features
Product A highlights whisper-quiet operation with engineered fan blades that reduce noise while maintaining airflow. Product B also focuses on low-noise operation, noting it stays quiet during focus sessions. Product B specifically mentions curved fan blades for better airflow efficiency and an MFDB bearing for lifespan. Product A does not specify bearing type or blade shape in the provided data. If bearing longevity is a priority, Product B provides that detail. For general quiet operation, both aim to minimize distraction, but Product B gives you more specific technical details about its fan construction.
Which cooler fits your build
Users needing full cooler replacement
Product A includes the complete aluminum heatsink and fan assembly. Its larger 3.5-inch width and 2-inch height provide more surface area for heat dissipation. This unit is designed for users who need to replace the entire cooling block, not just the fan component, ensuring proper contact with the CPU IHS.
Users replacing a broken fan only
Product B is a lightweight fan replacement unit weighing only 1.23 ounces. It measures 1.8 inches wide and 1.5 inches high, fitting specifically into existing Wraith Stealth coolers. Choose this option if your aluminum heatsink is intact and you only need to swap out a noisy or failed fan motor.
Budget-conscious AM4 and AM5 builders
This replacement fan is ideal for maintaining older systems without buying a new cooler. It supports 65W TDP Ryzen processors and features an MFDB bearing for longevity. If your current cooler is functional but the fan is failing, this smaller, lighter unit restores cooling performance efficiently for daily tasks and light gaming.
Users prioritizing airflow surface area
Product A offers a significantly larger heatsink footprint with 3.5-inch width and length. The increased mass and fin surface area help pull heat away from the CPU more effectively than a fan-only unit. Select this cooler if you want maximum passive cooling capacity within the standard Wraith Stealth form factor for AM4 or AM5 sockets.
The products compared
WSHAITE Wraith Stealth AM4 AM5
Best for: basic cooling for Ryzen 5 and 7
- Socket Compatibility
- AM4, AM5
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.5 × 3.5 × 2 inches
- Weight
- 2.82 ounces
View on Amazon: WSHAITE Wraith Stealth AM4 AM5 Affiliate link
This is a WSHAITE Wraith Stealth CPU cooler for AMD AM4 and AM5 sockets. It uses an aluminum heatsink and a single fan. The unit measures 3.5 by 3.5 by 2 inches and weighs 2.82 ounces. It fits Ryzen 5 and Ryzen 7 processors. You get a simple screw-mount design for easy installation. It offers reliable cooling for daily tasks and light overclocking.
Pros
- Compatible with AM4 and AM5 sockets
- Aluminum heatsink for efficient heat dissipation
- Compact 3.5 by 3.5 by 2 inch size
- Lightweight at 2.82 ounces
Cons
- Single fan limits maximum airflow potential
- Aluminum material conducts heat less effectively than copper
- No PWM fan speed control mentioned in specs
Good fit if
- You use an AMD Ryzen 5 or Ryzen 7 processor
- You need a compact cooler for small cases
- You want a simple screw-mount installation
Skip if
- You require high-end cooling for heavy overclocking
- You prefer copper heatsinks for better thermal conductivity
- You need silent operation with advanced fan control
Verdict: WSHAITE Wraith Stealth AM4 AM5 Aluminum Cooler fits users with Ryzen 5 or Ryzen 7 CPUs who need a basic, compact cooling solution. It is not suitable for heavy overclocking or users demanding maximum thermal performance.
WSHAITE AM4/AM5 Aluminum Replacement Fan
Best for: 65W Ryzen AM4/AM5 direct fan replacement
- Socket Compatibility
- AM4, AM5
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 1.8 × 1.8 × 1.5 inches
- Weight
- 1.23 ounces
View on Amazon: WSHAITE AM4/AM5 Aluminum Replacement Fan Affiliate link
This WSHAITE replacement fan pairs with the Wraith Stealth cooler for AM4 and AM5 sockets. It uses an aluminum heatsink and MFDB bearings to maintain stable temperatures between 40–60°C during light to moderate workloads. The unit measures 1.8 inches wide and 1.5 inches high, weighing just 1.23 ounces. It features curved blades for airflow and a braided power cable. You get a quiet, direct-swap upgrade for 65W Ryzen processors.
Pros
- Compatible with AM4 and AM5 sockets
- Aluminum heatsink material
- MFDB bearing for longevity
- Braided power cable
- Curved fan blades for airflow
Cons
- 1.23 ounces weight is minimal for heat dissipation
- 1.5 inches height limits compatibility with tall RAM
- No mention of PWM speed control
Good fit if
- You need a direct replacement for a worn Wraith Stealth fan
- You use 65W TDP Ryzen processors for office work or light gaming
- You want a quiet, low-profile upgrade without complex installation
Skip if
- You require active cooling for high-TDP processors over 65W
- You have tall RAM sticks that exceed 1.5 inches in height
- You need RGB lighting or software control features
Verdict: WSHAITE AM4 AM5 Aluminum Fan is a practical swap for users with 65W Ryzen CPUs who need a quiet, direct replacement for their stock cooler. It fits well in compact builds where height is a constraint.
Specifications side by side
| Spec | WSHAITE Wraith Stealth AM4 AM5 | WSHAITE AM4/AM5 Aluminum Replacement Fan |
|---|---|---|
| Socket Compatibility | AM4, AM5 | AM4, AM5 |
| Material | Aluminum | Aluminum |
| Features | Fan | Fan |
| Dimensions | 3.5 × 3.5 × 2 inches | 1.8 × 1.8 × 1.5 inches |
| Weight | 2.82 ounces | 1.23 ounces |
| Model | Wraith Stealth | Wraith Stealth |
Frequently asked questions
Does the Wraith Stealth AM4 AM5 fit in small cases?
Yes, it fits in compact builds. Its height is 2 inches, which is lower than many standard air coolers. The width and length are both 3.5 inches. This footprint allows it to clear RAM modules in most mid-tower cases. You should check your case specifications to ensure the 2-inch height clearance is sufficient for your specific motherboard layout.
Can I use the replacement fan with an AM5 processor?
Yes, the WSHAITE AM4/AM5 Aluminum Replacement Fan supports AM5 sockets. It is designed as a direct swap for stock coolers on these platforms. The product attributes list AM5 as a compatible socket. This makes it a viable option if you need a quieter or lighter fan for your existing AM5 heatsink assembly.
Which cooler is lighter for my build?
The WSHAITE AM4/AM5 Aluminum Replacement Fan is lighter. It weighs 1.23 ounces. The Wraith Stealth AM4 AM5 weighs 2.82 ounces. The replacement fan is less than half the weight of the full cooler. This reduced weight may be a factor if you are concerned about motherboard stress or are building a very lightweight system.
Is the Wraith Stealth good for Ryzen 7 CPUs?
It is suitable for basic cooling needs. The product verdict states it fits users with Ryzen 7 CPUs who need a compact solution. It is not intended for heavy overclocking. If you plan to run your Ryzen 7 at stock speeds without significant thermal load, this cooler provides adequate aluminum-based heat dissipation for general use.
What is the difference between the two WSHAITE products?
The main difference is size and purpose. The Wraith Stealth AM4 AM5 is a full cooler with a 3.5-inch width and 2-inch height. The Aluminum Replacement Fan is smaller at 1.8 inches wide and 1.5 inches high. The replacement fan is meant to swap directly with stock units, while the Stealth is a standalone cooler for broader compatibility.
Does the replacement fan come with a heatsink?
The product is listed as an Aluminum Replacement Fan. The name and attributes focus on the fan component. It is described as a direct replacement for stock coolers. This implies it replaces the fan unit on an existing heatsink. It is not described as a complete heatsink and fan assembly like the Wraith Stealth model.
Will the Wraith Stealth fit over RAM sticks?
Its 3.5-inch width may interfere with tall RAM modules. The cooler has a square footprint of 3.5 by 3.5 inches. You should measure the clearance between your CPU socket and the RAM slots. If your RAM is low-profile, this cooler will likely fit without issue. Tall RGB sticks might block the fan area.