WSHAITE Wraith Stealth AM4 AM5 Socket Fan CPU Cooler Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This wshaite wraith stealth am4 am5 socket fan CPU cooler review covers a compact, single-fan air cooler designed for AMD platforms. It features an aluminum heatsink and a single fan for heat dissipation. The unit measures 3.5 inches in width and length, with a height of 2 inches. It weighs 2.82 ounces. This small footprint makes it suitable for tight cases. It supports both AM4 and AM5 sockets, covering a wide range of Ryzen processors. You get a basic, no-frills cooling solution that relies on direct contact and airflow rather than heat pipes or large radiators.
What stands out
- Aluminum heatsink with optimized fins for efficient heat transfer
- Single fan engineered for quiet operation and steady airflow
- Simple screw-mount installation for AM4 and AM5 motherboards
- Compact dimensions of 3.5 x 3.5 x 2 inches
- Lightweight design at just 2.82 ounces
Who it fits
Good fit for
This cooler suits users with Ryzen 3, Ryzen 5, and Ryzen 7 processors who prioritize a low-profile build. It is ideal for office PCs, light gaming rigs, or workstations where thermal output is moderate. If you are building a small form factor case, its 2-inch height ensures compatibility with many mid-size chassis. It fits well for daily tasks, web browsing, and light productivity workloads where extreme cooling is not required.
Who should skip it
You should look elsewhere if you plan to run high-end Ryzen 9 chips or engage in heavy overclocking. This unit lacks heat pipes and has a small aluminum surface area, limiting its ability to dissipate high heat loads. It is not designed for sustained stress tests or intensive video rendering. If your CPU runs hot under load, this basic fan and heatsink combo will likely struggle to maintain safe temperatures.
Verdict: The Wraith Stealth is a basic, compact cooler for entry-level AMD builds. It works well for low-power CPUs in small cases.
Key specs explained
Socket Compatibility: AM4, AM5
This cooler works with both older AM4 and newer AM5 AMD sockets. You can use it with Ryzen 3000 through 9000 series processors. This broad support means you do not need a different cooler if you upgrade your motherboard within the AMD ecosystem. It simplifies your build planning by ensuring the mounting hardware fits your specific CPU socket type without requiring adapters or extra purchases.
Material: Aluminum
The heatsink is made from aluminum, a lightweight metal that conducts heat well. Aluminum is lighter than copper, which reduces the total weight your motherboard must support. This material choice is common in entry-level air coolers. It offers reliable heat dissipation for standard tasks. If you need higher thermal capacity, you might compare this against copper-heavy designs, but aluminum remains a practical choice for budget builds.
Width: 3.5 inches
The cooler is 3.5 inches wide. This narrow profile allows it to fit into smaller computer cases with limited lateral space. It also reduces the chance of blocking nearby RAM sticks, which is a common issue with wider coolers. You should check your case specifications to ensure this width clears the side panel. It is a practical dimension for compact mid-tower or mini-ITX builds where space is at a premium.
Height: 2 inches
At 2 inches tall, this cooler is very low-profile. It fits easily inside cases with low CPU cooler height limits. You can use it in cases that cannot accommodate taller towers. This height ensures good airflow compatibility with most standard PC cases. However, lower height often means less surface area for heat dissipation. You should verify your case manual to confirm this height does not interfere with the side panel closure.
Weight: 2.82 ounces
The unit weighs only 2.82 ounces. This light weight places minimal stress on your motherboard CPU socket and mounting brackets. It is less likely to cause sagging over time compared to heavier copper coolers. This makes it suitable for smaller motherboards or cases with weaker mounting points. The low weight also simplifies handling during installation. You can manage it easily without worrying about dropping it or straining the socket retention mechanism.
Design and build overview
The WSHAITE Wraith Stealth uses an aluminum heatsink for heat dissipation. Aluminum is a common material for entry-level coolers because it balances cost and thermal conductivity. The listing notes that the fins are optimized for airflow. This design aims to pull heat away from the CPU efficiently without requiring complex copper heat pipes. You get a straightforward, single-material construction that focuses on basic cooling needs.
According to the listing, the cooler measures 3.5 inches in width and length, with a height of 2 inches. It weighs 2.82 ounces. These compact dimensions mean it fits easily into small form factor cases or tight spaces around RAM slots. The low weight reduces stress on your motherboard socket. This makes it a practical choice for builds where space is limited or where you want to keep the overall system light.
The unit includes a single fan, as indicated by its features. The listing describes the fan blades as engineered for quiet operation while maintaining airflow. This suggests you can run your system without significant noise distractions during gaming or work. The installation relies on a simple screw-mount design for AM4 and AM5 sockets. This setup allows for quick assembly without complex brackets. You get a reliable, no-frills cooling solution that prioritizes ease of use and basic performance for daily tasks.
Setup and everyday use notes
Installation relies on a simple screw-mount design. The listing states this allows you to fit the cooler on AM4 and AM5 motherboards in minutes. You do not need complex brackets or extra tools beyond what is standard for this mounting style. The compact dimensions of 3.5 inches in width and length, paired with a 2-inch height, make it easy to place in most cases. It weighs 2.82 ounces, so it adds minimal load to your motherboard socket.
For daily use, the cooler is built for Ryzen 3, Ryzen 5, and Ryzen 7 processors. You can run it with models like the Ryzen 5 9600, Ryzen 7 8700F, or Ryzen 5 7600. The aluminum heatsink and optimized fins work with the included fan to pull heat away from the CPU. This setup aims to keep temperatures low during gaming or work tasks.
The fan blades are engineered to reduce noise while maintaining airflow. You should stay focused without distractions from loud operation. The unit is rated for reliable performance in daily use and light overclocking. It provides consistent cooling without requiring advanced tuning. You get a straightforward cooling solution that matches quality standards for standard builds. The single fan delivers the necessary airflow for these AMD platforms, ensuring your processor stays within safe operating limits during typical loads.
Before You Buy This Cooler
This cooler is a compact, single-fan solution for AMD AM4 and AM5 platforms. It is designed for Ryzen processors ranging from the 3000 to the 9000 series. Because it uses an aluminum heatsink, it is best suited for daily tasks, light gaming, or entry-level builds. You should verify that your case has enough clearance, as the unit is 3.5 inches wide and 2 inches tall. Also, check that your RAM slots do not block the 3.5-inch length. You will need to ensure your motherboard provides a fan header for the single included fan. Regular upkeep involves dusting the fins to maintain airflow. This option sits at the entry level of our 1 picks. It offers basic cooling without the bulk of larger towers. If you need higher thermal performance for heavy workloads, you should look at models with more heat pipes or larger fans. This choice fits users who prioritize low profile and simple installation over maximum cooling capacity.
Check before you buy
- Check case clearance for the 2-inch height.
- Ensure RAM does not block the 3.5-inch length.
- Verify your motherboard has a CPU fan header.
- Confirm compatibility with your specific Ryzen socket.
The product at a glance
WSHAITE Wraith Stealth AM4 AM5
Best for: basic cooling for small AMD AM4/AM5 builds
- Socket Compatibility
- AM4, AM5
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.5 × 3.5 × 2 inches
- Weight
- 2.82 ounces
View on Amazon: WSHAITE Wraith Stealth AM4 AM5 Affiliate link
The Wraith Stealth is a compact CPU cooler built for AMD AM4 and AM5 sockets. It uses an aluminum heatsink and a single fan to manage heat. The unit measures 3.5 by 3.5 by 2 inches and weighs 2.82 ounces. This small form factor fits easily into smaller cases. It is designed for Ryzen 3, 5, and 7 processors, offering basic cooling for standard daily tasks and light workloads.
Pros
- Compatible with AMD AM4 and AM5 sockets
- Compact dimensions of 3.5 x 3.5 x 2 inches
- Lightweight aluminum heatsink construction
- Simple screw-mount installation design
Cons
- Aluminum heatsink has lower thermal capacity than copper
- Single fan limits maximum airflow and cooling potential
- No PWM speed control mentioned in specifications
Good fit if
- You need a low-profile cooler for a small case
- You use an AMD Ryzen 3 or 5 processor
- You want a basic cooler for standard office tasks
Skip if
- You plan to overclock your CPU heavily
- You use a high-end Ryzen 7 or 9 processor
- You require quiet operation below standard fan speeds
Verdict: WSHAITE Wraith Stealth Aluminum AM4 AM5 Cooler is a basic solution for entry-level AMD builds. It fits users who prioritize case space over raw cooling performance.
Specifications side by side
| Spec | WSHAITE Wraith Stealth AM4 AM5 |
|---|---|
| Socket Compatibility | AM4, AM5 |
| Material | Aluminum |
| Features | Fan |
| Dimensions | 3.5 × 3.5 × 2 inches |
| Weight | 2.82 ounces |
| Model | Wraith Stealth |
Frequently asked questions
Does the WSHAITE Wraith Stealth fit in small cases?
Yes, this cooler is designed for compact builds. It measures 3.5 inches in width and length, with a height of just 2 inches. The low profile allows it to fit into cases with limited CPU clearance. Its small footprint makes it a good choice for mini-ITX or small form factor AMD systems where space is tight.
Is this cooler compatible with AM5 motherboards?
Yes, the WSHAITE Wraith Stealth supports both AM4 and AM5 sockets. You can install it on newer AMD platforms alongside older ones. This broad compatibility means you can use the same cooler if you upgrade from an AM4 Ryzen processor to an AM5 model without needing to purchase new mounting hardware.
What material is the heatsink made of?
The heatsink is constructed from aluminum. This material is common in entry-level coolers because it offers a balance of thermal conductivity and cost. While aluminum is lighter than copper, it is sufficient for basic cooling needs. The listing notes that the fins are optimized for airflow to help dissipate heat effectively.
How heavy is the Wraith Stealth cooler?
The unit weighs 2.82 ounces. This light weight reduces stress on the motherboard socket compared to heavier copper-based coolers. The low mass also makes installation easier, as you do not need to worry about supporting a heavy heatsink. It is a simple, lightweight solution for users who prioritize ease of setup.
Does it include a fan for cooling?
Yes, the product listing specifies that it includes a fan. The cooler relies on this single fan to push air through the aluminum fins. This active cooling method is necessary to move heat away from the CPU. The combination of the fan and the optimized fin design helps maintain stable temperatures during standard usage.
Who is this cooler best suited for?
This cooler is best for users who prioritize case space over raw performance. It is ideal for entry-level AMD builds using Ryzen processors. If you mainly use your PC for daily tasks, light gaming, or office work, this compact unit provides adequate cooling. It is not designed for heavy overclocking or high-end gaming rigs.