Thermaltake vs TRONWIRE: CPU Coolers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermaltake vs TRONWIRE CPU cooler comparison looks at two air coolers that share a 92mm fan size and aluminum construction. The Thermaltake ISGC-200 uses a low-profile side-flow design with three heat pipes. The TRONWIRE TW-2 features a taller tower with a copper core base. Both units rely on 4-pin PWM fans for speed control. You need to check the height and base material to see which fits your case and thermal needs better.
Key differences
| Aspect | Thermaltake 92mm Triple Heatpipe CPU Cooler | TRONWIRE TW-2 Low Profile Cooler |
|---|---|---|
| Height | 0.98 inches | 2.2 inches |
| Heat Pipes | 3 | not listed |
| Base Material | Copper + Aluminum | Copper core |
| Socket Compatibility | not listed | LGA 1200, 1150, 1151 |
| Weight | 1.05 pounds | not listed |
Which one should you choose?
Choose Thermaltake 92mm Triple Heatpipe CPU Cooler if
- You need a very low-profile cooler under one inch tall.
- You want a design that explicitly includes three heat pipes.
- You prefer a side-flow airflow pattern.
Choose TRONWIRE TW-2 Low Profile Cooler if
- You require a taller tower for potentially better heat dissipation.
- You need a cooler with a copper core base.
- You want pre-applied thermal paste for easy installation.
Verdict: The Thermaltake ISGC-200 is the better choice if your case has strict height limits or you prefer a compact side-flow design. The TRONWIRE TW-2 suits builds where you can accommodate a taller 2.2-inch tower and want a copper core base. Check your case clearance before deciding.
Specs: Thermaltake vs TRONWIRE
Heat pipe count
The Thermaltake ISGC-200 uses three copper heat pipes to move heat from the CPU to the fins. This direct contact helps transfer thermal energy efficiently. The TRONWIRE TW-2 data does not list a specific number of heat pipes. It mentions a copper core base and aluminum fins, but the pipe count is missing from the provided specifications. Without that detail, you cannot confirm if it matches the three-pipe layout of the Thermaltake. For buyers who prioritize known heat pipe counts for thermal performance, the Thermaltake offers clearer data here. The TRONWIRE relies on its copper core base for conduction, but the exact architecture is less defined in the specs.
Tower height
Height is a major difference between these two coolers. The Thermaltake ISGC-200 is very low profile, measuring only 0.98 inches in height. This slim design allows it to fit under small cases or near tall RAM sticks. The TRONWIRE TW-2 is significantly taller at 2.2 inches. This increased height gives it more surface area for the aluminum fins and allows the fan to sit further from the heatsink. If you have a compact case with strict height limits, the Thermaltake is the safer choice. For standard ATX cases where clearance is not an issue, the taller TRONWIRE may offer better airflow dynamics due to its size.
Socket compatibility
The TRONWIRE TW-2 explicitly lists support for Intel sockets LGA 1200, 1151, 1150, 1155, and 1156. This wide range covers many older and newer Intel motherboards. The Thermaltake ISGC-200 data does not list specific socket compatibility in the provided specs. While it is a CPU cooler, you must verify if it supports your specific motherboard socket before purchasing. For Intel users, the TRONWIRE provides clear compatibility information out of the box. If you have an older LGA 115x platform, the TRONWIRE is confirmed to work. For the Thermaltake, you would need to check the manufacturer’s full documentation to ensure your socket is supported.
Fan bearing type
Thermal performance and noise are linked to fan design. The Thermaltake ISGC-200 features a Hydro Dynamic Bearing (HDB) fan. This bearing type is noted for improved stability and extended durability compared to traditional sleeve bearings. It also helps reduce air turbulence and friction for quieter operation. The TRONWIRE TW-2 data lists a 92mm fan with a 3000 RPM speed and 4-pin PWM connector, but it does not specify the bearing type. You know the TRONWIRE fan spins faster, but you do not know if it uses HDB, sleeve, or ball bearings. The Thermaltake provides more detail on long-term reliability and noise characteristics through its bearing specification.
Weight
Weight affects how much pressure the cooler puts on the motherboard CPU socket. The Thermaltake ISGC-200 weighs 1.05 pounds. This is a moderate weight for a small cooler. The TRONWIRE TW-2 data does not list a weight. However, the TRONWIRE is taller and has a larger aluminum fin stack, which might suggest it is heavier, but this is not confirmed by the specs. Without a weight figure for the TRONWIRE, you cannot compare the mechanical stress on your motherboard. The Thermaltake gives you a concrete number to consider for motherboard longevity and bracket tension. For the TRONWIRE, this specification is missing from the provided data.
Choose the right cooler for you
Small case builders needing low height
The Thermaltake ISGC-200 measures just 0.98 inches in height. This slim profile fits easily into compact cases with limited clearance. Its side-flow design directs air across the fins rather than upward. You get a 92mm PWM fan with hydro dynamic bearings for stable operation. The three heat pipes help transfer heat efficiently despite the low height.
Users wanting pre-applied thermal paste
The TRONWIRE TW-2 comes with pre-applied thermal paste already on the base. This feature simplifies installation by removing the need to buy or apply paste separately. It supports LGA 1200 and 115x sockets with tool-free push pins. The copper core base and aluminum fins provide a solid foundation for heat dissipation without extra steps during setup.
Those prioritizing heat pipe count
The Thermaltake ISGC-200 explicitly lists three copper heat pipes in its specifications. These pipes connect the copper base directly to the sawtooth fins for efficient thermal transfer. The TRONWIRE TW-2 data does not specify a heat pipe count. If you prefer a design that clearly utilizes multiple heat pipes for direct contact cooling, this Thermaltake model offers that specific structural advantage.
The products compared
Thermaltake 92mm Triple Heatpipe CPU Cooler
Best for: Small cases and quiet operation needs
- Heat Pipes
- 3
- Fan Size
- 92mm
- Features
- Fan
- Dimensions
- 3.62 × 3.62 × 0.98 inches
- Weight
- 1.05 pounds
View on Amazon: Thermaltake 92mm Triple Heatpipe CPU Cooler Affiliate link
The Thermaltake ISGC-200 is a side-flow CPU cooler with a 92mm PWM fan and three heat pipes. Its copper and aluminum base transfers heat to sawtooth fins. The hydro dynamic bearing fan aims for stable, quiet operation. This compact unit suits small cases or builds needing focused airflow. It fits users who prioritize low noise and specific mounting dimensions over maximum cooling capacity.
Pros
- Three copper heat pipes for efficient heat transfer
- 92mm PWM fan with hydro dynamic bearing technology
- Sawtooth fin design improves cold air intake
- Compact 3.62 x 3.62 x 0.98 inch dimensions
Cons
- Smaller 92mm fan limits maximum airflow potential
- Single fan configuration restricts cooling headroom
- Side-flow design requires specific case compatibility
Good fit if
- You need a low-profile cooler for small cases
- You prioritize quiet operation from a 92mm fan
- You want a side-flow design for specific airflow paths
Skip if
- You require maximum cooling performance for high-end CPUs
- You prefer dual-fan setups for better heat dissipation
- You need a top-flow cooler for standard tower cases
Verdict: Thermaltake ISGC-200 92mm Side Flow Cooler fits users who need a quiet, compact solution for smaller builds. It is not suitable for those seeking high thermal performance from larger fans.
TRONWIRE TW-2 Low Profile Cooler
Best for: small form factor Intel builds
- Socket Compatibility
- LGA 1200, 1151, 1150, 1155, 1156
- Cooler Height
- 2.2 inches
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 3000 RPM
- System Type
- Desktop
View on Amazon: TRONWIRE TW-2 Low Profile Cooler Affiliate link
The TRONWIRE TW-2 is a low-profile air cooler designed for space-constrained desktop builds. It features a 92mm fan reaching 3000 RPM for active cooling. The heatsink combines aluminum fins with a copper core base for efficient heat transfer. It supports Intel sockets including LGA 1200 and 1151. The compact 2.2-inch height allows it to fit in small cases while providing tool-free installation with pre-applied thermal paste.
Pros
- Compact 2.2-inch height for small form factor cases
- Copper core base with aluminum heatsink for heat dissipation
- 92mm PWM fan supports up to 3000 RPM
- Pre-applied thermal paste simplifies installation
- Tool-free push pin mounting system
Cons
- 92mm fan size provides less airflow than standard 120mm or 140mm coolers
- Copper core base is smaller than full-coverage copper plates found on higher-end models
- Single fan configuration limits total cooling capacity
Good fit if
- You need a cooler under 2.5 inches in height
- You are building a compact desktop PC with limited clearance
- You use Intel processors on LGA 115x or LGA 1200 sockets
Skip if
- You require maximum cooling performance for high-TDP CPUs
- You have a standard ATX case with ample cooler height
- You prefer larger 120mm or 140mm fans for quieter operation
Verdict: The TRONWIRE TW-2 Low Profile CPU Cooler fits users who prioritize case compatibility over raw cooling power. It is a practical solution for small builds using Intel LGA 1200 or 1151 processors.
Specifications side by side
| Spec | Thermaltake 92mm Triple Heatpipe CPU Cooler | TRONWIRE TW-2 Low Profile Cooler |
|---|---|---|
| Socket Compatibility | not stated | LGA 1200, 1151, 1150, 1155, 1156 |
| Cooler Height | not stated | 2.2 inches |
| Heat Pipes | 3 | not stated |
| Tower Design | not stated | Low-Profile |
| Fan Size | 92mm | 92mm |
| Fan Speed | not stated | 3000 RPM |
| System Type | not stated | Desktop |
| Material | not stated | Copper, Aluminum |
| Features | Fan | Fan |
| Dimensions | 3.62 × 3.62 × 0.98 inches | 3.62 × 3.62 × 2.2 inches |
| Weight | 1.05 pounds | not stated |
| Model | CLP0538 | not stated |
Frequently asked questions
Which cooler is better for a small form factor Intel build?
The TRONWIRE TW-2 is the better choice for small form factor Intel builds. It supports LGA 1200 and LGA 1151 sockets, making it compatible with many modern Intel processors. Its design prioritizes case compatibility over raw cooling power, ensuring it fits in tight spaces while maintaining necessary connectivity for your specific motherboard.
Does the Thermaltake cooler use a side-flow fan design?
Yes, the Thermaltake ISGC-200 uses a side-flow fan design. This configuration directs air across the fins horizontally rather than pushing it upward. This approach is ideal for users who need a quiet, compact solution for smaller builds. It helps manage airflow in cases where top-down ventilation might be restricted by other components.
What are the dimensions of the TRONWIRE TW-2 cooler?
The TRONWIRE TW-2 measures 3.62 inches in width, 3.62 inches in length, and 2.2 inches in height. These dimensions make it a low-profile option suitable for compact cases. The height allows it to clear low-profile RAM modules while still providing enough surface area for effective heat dissipation in small desktop systems.
Is the Thermaltake cooler suitable for high-performance gaming rigs?
No, the Thermaltake ISGC-200 is not suitable for those seeking high thermal performance from larger fans. It is designed for quiet operation and compact builds rather than heavy workloads. If you need to cool a high-end gaming CPU under sustained load, this low-profile side-flow cooler may not provide sufficient thermal headroom.
What materials are used in the TRONWIRE TW-2 construction?
The TRONWIRE TW-2 is constructed using copper and aluminum materials. The copper core base helps transfer heat efficiently from the CPU, while the aluminum fins provide a large surface area for cooling. This combination offers a practical balance of thermal conductivity and lightweight design, making it a reliable choice for standard desktop environments.
How heavy is the Thermaltake ISGC-200 cooler?
The Thermaltake ISGC-200 weighs 1.05 pounds. This weight reflects its compact 92mm fan size and three-heatpipe design. It is light enough to place minimal stress on your motherboard socket while still providing adequate structural integrity for stable operation. This makes it a safe option for smaller cases with limited mounting options.