Thermaltake UX200 SE ARGB Air Alternatives: 6 Similar Picks Compared

Comparing UX200 SE Alternatives

Level Play 120mm 4-Heatpipe ARGB Cooler

The Level Play 120mm ARGB Cooler raises the thermal ceiling to 200W, offering 30W more headroom than the Thermaltake UX200 SE. It uses a 152mm tower profile, which is slightly taller than the UX200 SE's 7.3-inch height. This model provides 3-pin ARGB synchronization, whereas the Thermaltake unit supports 5V ARGB sync. The Level Play cooler measures 5 inches wide and weighs 1.54 pounds. It maintains compatibility with AM5 and LGA 1851 sockets. You should choose this alternative if your motherboard uses 3-pin ARGB headers or if you need higher TDP support for a more powerful processor. The wider base may require checking case clearance.

upHere 120mm ARGB CPU Air Cooler

The upHere 120mm ARGB Cooler focuses on airflow efficiency with a rated 68.2 CFM, compared to the Thermaltake UX200 SE's unspecified airflow volume. It shares the four direct-contact heat pipe design but offers a slightly shorter height of 6.1 inches versus the UX200 SE's 7.3 inches. This makes it a better fit for cases with lower CPU cooler clearance limits. It supports the same modern sockets, including AM5 and LGA 1851. The upHere model is designed for quiet operation and provides wide RAM clearance. If you prioritize compact height and specific airflow metrics over the Thermaltake's specific 5V sync features, this cooler is a practical swap for standard desktop builds.

Thermalright Assassin X 120 Digital ARGB

The Thermalright Assassin X 120 Digital ARGB introduces a live temperature readout screen, a feature absent from the Thermaltake UX200 SE. It delivers 70.84 CFM of airflow and uses four heat pipes in a 151 mm tower. The Thermalright unit is slightly shorter at 5.94 inches compared to the UX200 SE's 7.3-inch height. It supports AM5, LGA 1851, and LGA 1200 sockets. The inclusion of digital monitoring allows you to track thermal performance directly on the cooler. If you value real-time data visibility and a compact footprint, this alternative offers distinct advantages. It sacrifices the Thermaltake's specific 5V motherboard sync for integrated digital feedback and slightly different airflow characteristics.

Jonsbo CA40 Black 120mm ARGB CPU Cooler

The Jonsbo CA40 Black 120mm ARGB Cooler provides a substantial 225W thermal headroom, significantly exceeding the Thermaltake UX200 SE's 170W rating. This makes it suitable for high-TDP processors that the UX200 SE might struggle to cool efficiently. It retains ARGB lighting and supports AM5 and LGA 1851 sockets. The Jonsbo model is designed for standard case clearances while offering superior thermal capacity. If your build involves power-hungry CPUs, the Jonsbo alternative offers the necessary thermal margin. It trades the UX200 SE's moderate TDP rating for robust cooling potential, ensuring stability under heavy loads. The 120mm fan size is consistent with many modern tower coolers.

Jungle Leopard KF620 Dual Tower Cooler

The Jungle Leopard KF620 Dual Tower Cooler distinguishes itself with six heat pipes, doubling the count found in the Thermaltake UX200 SE. This twin-tower design offers greater thermal mass and surface area for heat dissipation. It supports AM5, LGA 1851, LGA 1700, and LGA 1200 sockets. The cooler measures 6.23 inches wide and 5.39 inches high. It includes ARGB lighting for aesthetic synchronization. If you require maximum cooling performance for high-end CPUs, the additional heat pipes and dual-tower architecture provide a clear advantage. The Jungle Leopard is ideal for users who prioritize thermal capacity over the compact single-tower form factor of the UX200 SE.

Thermalright AXP90 36mm Low-Profile Cooler

The Thermalright AXP90 36mm Low-Profile Cooler is designed for space-constrained ITX builds, featuring a minimal 36mm height compared to the Thermaltake UX200 SE's 7.3-inch profile. It uses four heat pipes but omits ARGB lighting entirely. It supports AM4, AM5, LGA 1851, LGA 1200, LGA 1150, and LGA 1151 sockets. The compact size makes it suitable for small form factor cases where standard towers do not fit. If you are building a low-profile system, this alternative is the only viable option among these picks. It trades aesthetic lighting and high TDP capacity for extreme compactness and broad socket compatibility in tight spaces.

Quick picks

Our 7 picks

1 Best overall

Thermaltake UX200 SE ARGB Air Cooler

Best for: mainstream builds needing 5V motherboard lighting sync

Socket Compatibility

LGA 1851, 1700, 1200, AM4, AM5

Heat Pipes

4

TDP Rating

170W

Lighting

ARGB

Color

Black

Dimensions

5.2 × 4.9 × 7.3 inches

View on Amazon: Thermaltake UX200 SE ARGB Air Cooler Affiliate link

The Thermaltake UX200 SE ARGB CPU Cooler is a standard tower air cooler built with four 6mm direct-contact copper heat pipes and a 170W TDP rating. It features a 9-blade fan integrated with 15 addressable LEDs that sync with 5V motherboard headers. This unit suits you if you want synchronized lighting across modern Intel LGA 1851 or AMD AM5 sockets.

Pros

• Four 6mm direct-contact copper heat pipes rated up to 170W TDP
• 15 addressable LEDs supporting 5V motherboard RGB sync
• Wide socket support covering Intel LGA 1851 and AMD AM5
• 9-blade fan designed for steady airflow through aluminum fins

Cons

• Cooling capability limited to a 170W TDP ceiling
• Tall 7.3-inch listed height requires adequate case clearance
• Requires a 5V ARGB motherboard header to control lighting

Good fit if

• You have a compatible 5V ARGB motherboard header from ASUS, ASRock, Gigabyte, or MSI.
• You run a mainstream processor with thermal output under the 170W TDP limit.
• You need mounting hardware that supports Intel LGA 1851 or AMD AM5 sockets.

Skip if

• You use high-draw processors requiring more than 170W TDP cooling capacity.
• You build in a compact PC enclosure with under 7.3 inches of cooler clearance.
• You lack a 5V addressable RGB motherboard header to operate the lighting.

Verdict: Thermaltake UX200 SE ARGB CPU Cooler delivers 170W TDP cooling with four direct-contact copper heat pipes and native 5V ARGB motherboard synchronization. It offers solid thermal coverage for everyday Intel and AMD builds.

2 Also great

Level Play 120mm 4-Heatpipe ARGB Cooler

Best for: modern mid-tower builds needing 3-pin ARGB sync

Socket Compatibility

AM4, AM5, LGA 1700, LGA 1851

Cooler Height

152mm

Heat Pipes

4

Fan Size

120mm

TDP Rating

200W

Fan Speed

1800 RPM ± 10%

View on Amazon: Level Play 120mm 4-Heatpipe ARGB Cooler Affiliate link

The Level Play 120mm ARGB Air Cooler is a single-tower heatsink built for modern Intel and AMD processors. It features four direct-contact copper heat pipes rated for up to 200W TDP. A 120mm PWM fan delivers up to 53 CFM of airflow with addressable RGB Gen 2 lighting via a 3-pin motherboard header. At 152 mm tall, it suits builders who want standard tower clearance and motherboard-synced lighting.

Pros

• Rated for CPUs up to 200W TDP with four direct-contact copper heat pipes
• 120mm PWM fan operates from 0 to 1800 RPM with noise levels between 0 and 26 dBA
• Includes eight Gen 2 addressable RGB LEDs compatible with 3-pin motherboard headers
• Comes with extra mounting clips to support an optional push-pull dual fan configuration

Cons

• Second fan for push-pull configuration is not included
• 152mm cooler height prevents installation in low-profile or small form factor cases
• Socket compatibility excludes older Intel platforms prior to LGA 1700

Good fit if

• You run a modern Intel LGA 1700/1851 or AMD AM4/AM5 processor with up to 200W TDP.
• You want addressable RGB lighting synchronized directly via a standard 3-pin motherboard header.
• You plan to expand cooling performance later by adding a second 120mm fan.

Skip if

• You need a low-profile cooler to fit inside a compact mini-ITX enclosure.
• You are using an older platform such as Intel LGA 1200 or LGA 115x.

Verdict: Level Play 120mm ARGB Air Cooler provides 200W cooling capacity and 3-pin ARGB motherboard synchronization in a 152mm tower profile. It offers quiet operation up to 26 dBA for modern AMD and Intel systems.

3 Also great

upHere 120mm ARGB CPU Air Cooler

Best for: broad socket support and tall RAM setups

Socket Compatibility

AM5/AM4, LGA 1851/1700/1200/1155/1156

Cooler Height

6.1 inches

Heat Pipes

4

Fan Size

120mm

Fan Speed

1650rpm ±10%

Lighting

ARGB

View on Amazon: upHere 120mm ARGB CPU Air Cooler Affiliate link

The upHere 120mm ARGB CPU Air Cooler provides an alternative tower design equipped with four 6mm direct-contact heat pipes. Its 120mm fan delivers up to 68.2 CFM of airflow at 1650 RPM while keeping noise under 26 dB(A). It supports both Intel LGA 1851/1700 and AMD AM5/AM4 sockets. You get tall RAM clearance without removing the fan, making it practical if you want broad socket coverage and standard tower cooling.

Pros

• Delivers 68.2 CFM airflow at a maximum noise level below 26 dB(A)
• Four 6mm direct-contact heat pipes with a 25mm contact base
• Broad socket support including Intel LGA 1851 and AMD AM5
• Non-disassembly fan mount maintains RAM slot clearance

Cons

• 6.1-inch height requires sufficient clearance in compact cases
• Single-fan setup with a maximum speed of 1650 RPM

Good fit if

• You need support for newer sockets like Intel LGA 1851 or AMD AM5.
• You run tall RAM modules and need dedicated memory clearance.
• You want 68.2 CFM airflow while keeping noise under 26 dB(A).

Skip if

• You have a slim chassis that cannot fit a 6.1-inch tall cooler.
• You require a low-profile top-down air cooler.

Verdict: upHere 120mm ARGB CPU Air Cooler delivers reliable 68.2 CFM airflow and four direct-contact heat pipes with wide socket compatibility. It suits standard desktop cases needing quiet ARGB cooling with clearance for tall RAM.

4 Best budget

Thermalright Assassin X 120 Digital ARGB

Best for: live temperature tracking on standard tower builds

Socket Compatibility

AM4, AM5, LGA 1851/1700/115X/1200

Cooler Height

151 mm

Heat Pipes

4

Tower Design

Single-Tower

Fan Size

120 mm

Fan Speed

2000 RPM

View on Amazon: Thermalright Assassin X 120 Digital ARGB Affiliate link

The Thermalright Assassin X 120 Digital ARGB is a single-tower cooler featuring four heat pipes and a 151 mm height. It includes a 120 mm PWM fan pushing up to 70.84 CFM at 2000 RPM, paired with a 5V 3-pin ARGB connection. A top-cover digital screen tracks real-time processor and graphics stats using dedicated software. This suits you if you want onboard telemetry and standard case fitment.

Pros

• Integrated digital screen displays CPU and GPU temperatures and usage
• 120 mm PWM fan delivers up to 70.84 CFM airflow and 2.63 mm H2O pressure
• Moderate 151 mm overall cooler height fits standard PC enclosures
• Standard 5V 3-pin motherboard connection controls the ARGB lighting

Cons

• Requires background TRCC software running to supply screen data
• Requires original motherboard backplate for AMD AM4 and AM5 mounting
• Fan reaches up to 29.8 dB(A) at maximum 2000 RPM speed

Good fit if

• You want live temperature and usage readouts on your CPU cooler top plate.
• You need a 120 mm tower cooler that fits within 151 mm of vertical clearance.
• You have a motherboard equipped with a standard 5V 3-pin ARGB header.

Skip if

• You build an AMD system missing its factory motherboard backplate.
• You prefer not to run background utility software for the digital readout.

Verdict: Thermalright Assassin X 120 Digital ARGB combines four heat pipes, 70.84 CFM of airflow, and a live readout screen into a compact 151 mm tower.

5 Best copper

Jonsbo CA40 Black 120mm ARGB CPU Cooler

Best for: High TDP builds with standard case clearance

Socket Compatibility

AM5/AM4/Intel LGA115X/1200/1700/1851

Cooler Height

157mm

Heat Pipes

4

Fan Size

120mm

TDP Rating

225W

Lighting

ARGB

View on Amazon: Jonsbo CA40 Black 120mm ARGB CPU Cooler Affiliate link

The Jonsbo CA40 Black is a 157mm tall air cooler with a 225W TDP rating. It uses four copper heat pipes and a 120mm PWM fan for heat transfer. The unit supports AM5, AM4, and Intel LGA115X/1200/1700/1851 sockets. It features 5V ARGB lighting that syncs with motherboards. This cooler suits users needing high thermal performance in a standard tower form factor.

Pros

• 225W TDP rating for demanding tasks
• Four copper heat pipes for efficient heat transfer
• Supports AM5 and Intel LGA1851 sockets
• 5V ARGB lighting with motherboard sync

Cons

• 157mm height may not fit small cases
• No mention of included thermal paste
• Single 120mm fan limits total airflow

Good fit if

• You need a cooler rated for 225W TDP
• You have a standard ATX case with 157mm clearance
• You want ARGB lighting sync on AM5 or LGA1851

Skip if

• Your case height clearance is under 157mm
• You require dual 120mm fans for maximum airflow
• You are building in a low-profile Mini-ITX case

Verdict: Jonsbo CA40 Black 120mm ARGB Air Cooler offers strong 225W thermal headroom for users with standard case clearance. It fits well in builds requiring AM5 or LGA1851 support with synchronized lighting.

6 Best premium

Jungle Leopard KF620 Dual Tower Cooler

Best for: High TDP CPUs needing twin-tower cooling

Heat Pipes

6

Tower Design

Dual-Tower

TDP Rating

265W

Lighting

ARGB

Socket Compatibility

AM4, AM5, LGA 1851, LGA 1700, LGA 1200

Color

Black

View on Amazon: Jungle Leopard KF620 Dual Tower Cooler Affiliate link

The Jungle Leopard KF620 is a twin-tower air cooler with six heat pipes and dual ARGB fans. It handles TDP ratings above 265W and features a digital display on the top cover to show real-time CPU temperature. This cooler supports AM4, AM5, and LGA 1700 sockets. It suits users who want high heat dissipation and visible system monitoring in a black build.

Pros

• Six high-conductivity heat pipes for rapid heat transfer
• Twin-tower design with dual PWM fans for superior cooling
• Digital display top cover shows live CPU temperature
• ARGB lighting syncs with motherboard software

Cons

• Large dimensions at 5.39 inches in height may block RAM
• Digital display adds visual complexity to the top cover
• Heavy weight at 2.2 pounds requires sturdy mounting

Good fit if

• You need cooling for CPUs with high TDP loads
• You want real-time temperature data without extra software
• You prefer a twin-tower design with dual fans

Skip if

• You have a small case with low CPU clearance
• You prefer a minimalist look without digital displays
• You use older sockets like LGA 1150 or 1366 only

Verdict: Jungle Leopard KF620 ARGB Cooler is a robust option for high-performance builds that prioritize thermal capacity and direct temperature monitoring. It fits users who value twin-tower efficiency and visible ARGB integration in their PC aesthetics.

7 Best lga 1150

Thermalright AXP90 36mm Low-Profile Cooler

Best for: LGA 1150 compact ITX builds

Socket Compatibility

AM4, AM5, LGA1700, 115X, 1200, 1851

Cooler Height

36mm

Heat Pipes

4

Tower Design

Low-Profile

Fan Size

92mm

System Type

ITX

View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler Affiliate link

This low-profile unit gives you an ultra-compact cooling option for tight setups. At 36mm total height, it pairs four 6mm heat pipes with a 92mm slim PWM fan rated at 22.4 dBA or lower. It mounts onto Intel LGA 1150 along with other 115X and AMD AM4 sockets. You get a space-saving heatsink suited for compact ITX builds that lack clearance for full-size tower coolers.

Pros

• Total height of 36mm fits compact ITX cases
• Four 6mm heat pipes with secondary reflow soldering
• Low maximum noise rating of 22.4 dBA
• Broad socket fit including LGA 1150, 1200, 1700, and AM4

Cons

• No integrated ARGB or LED lighting included
• Smaller 92mm fan diameter than standard 120mm alternatives

Good fit if

• You build inside a slim ITX case with under 40mm of clearance.
• You need a low-profile heatsink compatible with an Intel LGA 1150 socket.
• You prioritize quiet fan operation with a 22.4 dBA ceiling.

Skip if

• You want ARGB lighting to sync with your motherboard.
• You have clearance for a full-size 120mm tower cooler.

Verdict: Thermalright 92mm Low-Profile CPU Cooler delivers a 36mm total profile and four heat pipes for space-constrained LGA 1150 and ITX systems. It trades away ARGB lighting for minimal vertical clearance.

Specifications side by side

Frequently asked questions

See also

• thermaltake alimentation atx thermaltake toughpower alternatives
• thermaltake tr100 sff chassis mitx alternatives