Thermalright-TR AXP120-X67 White ARGB Low Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This thermalright tr axp120 x67 white argb low review covers a compact air cooler designed for small form factor builds. It features a 67 mm tower height and a standard 120 mm fan. The cooler uses six copper heat pipes to transfer heat from the base to the aluminum fins. You get ARGB lighting for visual customization. The unit supports modern Intel and AMD sockets. This design prioritizes fitment in tight cases while maintaining adequate cooling performance for standard desktop processors.
What stands out
- 67 mm total height for small case compatibility
- Six 6 mm copper heat pipes with AGHP technology
- 120 mm PWM fan with 59 CFM max airflow
- 5V 3-pin ARGB lighting interface
- Supports Intel LGA 1700/1851 and AMD AM5
Who it fits
Good fit for
You should choose this cooler if you are building in a mini-ITX or micro-ATX case with strict height limits. The 67 mm profile allows installation in chassis that cannot accommodate taller towers. It suits users who want white ARGB aesthetics to match their build theme. The inclusion of a 120 mm fan provides better airflow than typical 92 mm low-profile units. It is ideal for mainstream CPUs that do not require massive cooling capacity.
Who should skip it
You should skip this option if you need to cool high-end, power-hungry processors. The 67 mm height and single fan limit maximum heat dissipation. Users requiring silent operation below 20 dB may find the 26.1 dB noise level too loud. If your case supports taller coolers, you might get better performance from a larger tower design. This unit is not suitable for extreme overclocking scenarios or high-TDP gaming rigs.
Verdict: The Thermalright AXP120-X67 offers a practical balance of low height and decent airflow for compact builds. It is a solid choice for small cases where standard coolers will not fit.
Key specs explained
Cooler Height: 67 mm
This low-profile design fits inside compact cases where space is limited. You can install this cooler without worrying about RAM clearance or case height restrictions. It is ideal for small form factor builds. Compare this height with standard towers that often exceed 150 mm. This dimension ensures compatibility with many mini-ITX chassis.
Heat Pipes: 6
Six copper heat pipes move heat from the base to the fins efficiently. More pipes generally mean better heat dissipation for the same footprint. This setup helps maintain lower CPU temperatures under load. When shopping, compare this count with coolers that use fewer pipes. It supports sustained performance in a small package.
Fan Speed: 1800 RPM
This maximum speed balances airflow with noise levels. You get sufficient cooling without excessive fan noise during normal use. The 1800 RPM rating is moderate for a 120 mm fan. Check this against higher RPM fans that may be louder. It suits users who prioritize a quiet system environment.
Lighting: ARGB
Addressable RGB lighting allows you to customize color effects on the cooler. You can sync the lighting with your motherboard software for a unified look. This feature is purely aesthetic and does not affect cooling performance. Compare this with non-RGB options if you prefer a clean, silent appearance. It adds visual appeal to white-themed builds.
Design and Build Quality
The listing describes a low-profile tower measuring 123.5 by 120 by 67 mm. The heat sink combines aluminum fins with a pure copper base. This layout keeps the total height to 67 mm, which helps you avoid conflicts with tall RAM sticks or small case walls. The six 6 mm heat pipes use AGHP technology to manage heat transfer regardless of orientation. This means you can mount the cooler horizontally or vertically without worrying about gravity affecting performance.
The included 120 mm fan measures 15 mm in thickness. It connects via a 4-pin PWM header for speed control and a 5V 3-pin ARGB header for lighting. The fan moves up to 59 CFM of air while staying under 26.1 dB. This quiet operation suits users who need cooling without adding noise to their workspace. The cooler supports Intel LGA 1150 through 2066 and AMD AM4 and AM5 sockets. Metal fasteners are provided for both platforms.
The finish is white, matching the ARGB lighting theme. The base uses a full electroplating reflow welding process. This construction aims to improve heat transfer efficiency from the CPU to the pipes. The listing notes that thermal paste is included to aid this process. You get a compact, white tower that prioritizes fit in tight spaces while maintaining standard fan compatibility.
Setup and Daily Use Guide
Installing this cooler requires matching the included metal fasteners to your specific CPU socket. The listing confirms support for Intel LGA 1150, 1151, 1155, 1156, 1200, 1700, 1851, 2011, and 2066, as well as AMD AM4 and AM5. You will need to select the correct mounting plate for your platform to ensure secure attachment. The cooler’s compact dimensions of 123.5 by 120 by 67 mm allow it to fit into tight spaces, but you must verify case clearance for the 120 mm fan.
For operation, the included TL-C12015W-S PWM fan connects via a 4-pin header for speed control. You also need a 5V 3-pin ARGB header for the lighting effects. The fan runs at 1800 RPM with a maximum airflow of 59 CFM and a noise level of 26.1 dB. This specification suggests quiet daily use, suitable for office environments or quiet home PCs.
The six 6mm copper heat pipes use AGHP technology to manage heat effectively in various orientations. This means you can mount the cooler horizontally or vertically without worrying about gravity affecting performance. The pre-applied thermal paste is intended to improve heat transfer from the start. You do not need to apply additional paste unless you remove the existing layer. The full electroplating reflow welding process on the base aims to maintain consistent contact with the CPU. This setup provides a straightforward installation path for users building compact systems.
Before You Buy This Cooler
Before you buy the Thermalright AXP120-X67, verify your case supports a 67 mm tower height. This low-profile design fits small form factor builds but may conflict with tall RAM sticks. You must confirm your motherboard socket matches the included metal fasteners for LGA 1700, AM4, or other supported platforms. The cooler includes a 120 mm PWM fan and 5V ARGB lighting. Ensure your motherboard has a 5V 3-pin header for the RGB interface. You may need additional thermal paste if the included paste is insufficient for your specific CPU. This cooler suits users prioritizing compact dimensions over maximum cooling headroom. It sits alongside other air coolers as a specialized option for tight spaces. Regularly clean the aluminum fins to maintain airflow efficiency. Check that your power supply provides a 4-pin CPU fan header for PWM control. This guide helps you decide if this spec-focused cooler meets your system requirements.
Check before you buy
- Verify your case supports a 67 mm tower height.
- Check motherboard RAM clearance against the cooler dimensions.
- Confirm your CPU socket matches the included mounting fasteners.
- Ensure your motherboard has a 5V 3-pin ARGB header.
- Check for a 4-pin CPU fan header for PWM control.
The product at a glance
Thermalright AXP120-X67 White ARGB
Best for: Small cases needing 67 mm clearance
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 67 mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120 mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright AXP120-X67 White ARGB Affiliate link
This low-profile air cooler stands 67 mm tall with a 120 mm fan. It uses six 6 mm copper heat pipes and a pure copper base for heat transfer. The included PWM fan runs up to 1800 RPM with a maximum noise level of 26.1 dB. It supports modern Intel and AMD sockets. You get white ARGB lighting for your build. This cooler suits small form factor cases where height is limited.
Pros
- 67 mm total height fits tight cases
- Six 6 mm pure copper heat pipes
- 120 mm PWM fan with 59 CFM airflow
- White ARGB lighting via 5V 3-pin header
Cons
- Aluminum fins may offer less heat capacity than all-copper designs
- Fan speed caps at 1800 RPM, limiting peak cooling potential
- No mention of included thermal paste quality or brand
Good fit if
- You need a cooler under 70 mm for SFF builds
- You want white ARGB lighting for your chassis
- You use AM5 or LGA1700 sockets
Skip if
- You require maximum cooling performance for high-TDP CPUs
- You prefer black components over white aesthetics
- You need a cooler taller than 67 mm
Verdict: Thermalright AXP120-X67 White ARGB Low Profile fits small cases needing 67 mm clearance. It works well for users who prioritize low noise and white aesthetics over raw cooling power.
Specifications side by side
| Spec | Thermalright AXP120-X67 White ARGB |
|---|---|
| Socket Compatibility | AM4, AM5, LGA1700, LGA1851, LGA1200 |
| Cooler Height | 67 mm |
| Heat Pipes | 6 |
| Tower Design | Low-Profile |
| Fan Size | 120 mm |
| Fan Speed | 1800 RPM |
| Lighting | ARGB |
| Color | White |
| Features | Fan |
| Dimensions | 4.86 × 4.72 × 2.64 inches |
Frequently asked questions
What CPU sockets does the Thermalright AXP120-X67 White ARGB support?
This cooler supports a wide range of modern platforms. It is compatible with AMD AM4 and AM5 sockets. For Intel users, it works with LGA 1851, LGA 1700, LGA 1200, LGA 1150, and LGA 1151. This broad compatibility ensures you can use it with most current or recent processors.
How many heat pipes are in the AXP120-X67 cooler?
The unit features six copper heat pipes. These pipes help transfer heat away from the CPU base efficiently. This configuration is designed to maximize thermal performance within the constraints of a low-profile design, making it suitable for compact builds where space is tight.
Is the AXP120-X67 compatible with white PC builds?
Yes, the cooler is available in a white color scheme. It also includes ARGB lighting to match other white components in your system. This aesthetic choice allows you to maintain a cohesive look in small form factor cases without compromising on visual appeal.
What are the physical dimensions of the Thermalright AXP120-X67?
The cooler measures 4.72 inches in width, 2.64 inches in height, and 4.86 inches in length. These compact dimensions ensure it fits into small cases. You should verify that your case can accommodate this height to avoid clearance issues with RAM or side panels.
Does this cooler come with a fan included?
Yes, the product listing confirms that a fan is included. The fan works with the heat sink to dissipate heat from the six copper pipes. Having the fan included simplifies your build process, as you do not need to purchase a separate 120 mm fan for operation.
Who is this cooler best suited for?
This cooler is ideal for users building in small cases with limited clearance. It is specifically designed for systems needing only 67 mm of tower height. It suits those who prioritize low noise levels and a clean white aesthetic over maximum raw cooling power for extreme overclocking.