6 Best Alternatives to the Thermalright-TR AXP120-X67 White ARGB Low (2026)

How these alternatives compare

Thermalright Assassin X 120 White ARGB

The Thermalright Assassin X 120 White ARGB is taller at 148 mm, so it does not fit low-profile cases. It uses four heat pipes instead of six, which reduces surface area for heat dissipation. This model targets mid-tower builds where case clearance is less restrictive. You gain a larger fin stack that handles higher thermal loads from 125 to 225 W CPUs more effectively than the AXP120-X67. If you need a white cooler for a standard case, this provides better thermal capacity. The trade-off is the increased height, which limits compatibility with compact chassis designs that require under 70 mm clearance.

Thermalright Peerless Assassin 120 White ARGB Cooler

The Thermalright Peerless Assassin 120 White ARGB is a dual-tower design that stands 155 mm tall. It uses six heat pipes like the original but in a much larger configuration. This cooler is significantly heavier at 1.87 pounds and requires standard ATX cases with ample height. It offers superior cooling performance for power users who prioritize thermal headroom over space savings. The dual-tower structure provides more fin surface area, allowing it to handle high-wattage processors more efficiently. You should choose this if you have a full-size case and need maximum cooling performance. It sacrifices compactness entirely for raw thermal capability.

Thermalright Burst Assassin 120 ARGB

The Thermalright Burst Assassin 120 ARGB is a single-tower cooler that stands 152 mm tall. It uses six heat pipes within a larger tower structure. This model is designed for medium cases where low-profile constraints do not apply. It offers reliable cooling performance without the bulk of a dual-tower design. The single-tower layout provides better airflow clearance for RAM modules compared to wider dual-tower units. You should pick this if you need a balance between performance and component clearance in a mid-tower case. It gives up the compact form factor of the AXP120-X67 for improved heat dissipation in standard builds.

Thermalright Assassin King 120 SE White ARGB

The Thermalright Assassin King 120 SE White ARGB stands 148 mm tall, making it unsuitable for low-profile cases. It uses five heat pipes, one fewer than the AXP120-X67. This model is designed for mid-size cases where height is not a limiting factor. It provides solid cooling performance for standard builds with a focus on white aesthetics and ARGB lighting. The larger tower design allows for better heat spreading compared to the low-profile unit. You should choose this if you have a mid-tower case and want a balance of performance and style. It sacrifices compactness for a more traditional air cooler footprint.

Thermalright AXP120-X67 White ARGB Cooler

The Thermalright AXP120-X67 White ARGB Cooler listed here is nearly identical to the original product. It shares the same 67 mm height and six heat pipe configuration. The main difference lies in the specific socket mounting support mentioned in the data. This version may lack support for the latest Intel sockets compared to the primary listing. It is suitable for users who need a low-profile solution under 67 mm tall. The thermal performance remains consistent with the original design. You should consider this if you find a better price or availability. It offers the same compact form factor but with potentially limited compatibility for newer motherboards.

Thermalright Assassin King 120 White ARGB

The Thermalright Assassin King 120 White ARGB stands 148 mm tall, which exceeds the low-profile limit. It uses five heat pipes, one less than the original. This model is designed for standard ATX cases with modern socket support. It provides reliable cooling for mainstream builds without requiring extreme thermal headroom. The five-heat-pipe design offers a balance between performance and size for mid-tower cases. You should pick this if you need a white cooler with ARGB lighting for a standard case. It gives up the compact nature of the AXP120-X67 for improved cooling capacity in larger chassis designs.

Quick picks

Our 7 picks

1 Best overall

Thermalright AXP120-X67 White ARGB

Best for: Compact cases needing modern socket support

Socket Compatibility

AM4, AM5, LGA1700, LGA1851, LGA1200

Cooler Height

67 mm

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120 mm

Fan Speed

1800 RPM

View on Amazon: Thermalright AXP120-X67 White ARGB Affiliate link

This is a low-profile CPU air cooler designed for small form factor builds. It stands 67 mm tall with a 120 mm fan. The cooler uses six copper heat pipes with AGHP technology to manage heat effectively in vertical or horizontal orientations. It supports modern Intel and AMD sockets. You get white ARGB lighting for your build aesthetic. It is a practical solution for compact cases where height is limited.

Pros

• 67 mm total height fits small cases
• Six pure copper heat pipes with AGHP technology
• 120 mm PWM fan with 59 CFM airflow
• White ARGB lighting for aesthetic builds
• Supports LGA 1700, LGA 1851, AM4, and AM5

Cons

• Low-profile design limits cooling headroom for high-end CPUs
• Aluminum fins may not dissipate heat as fast as all-copper designs
• Single fan configuration offers less airflow than dual-fan towers

Good fit if

• You are building in a small form factor case with height limits
• You need support for modern LGA 1700 or AM5 sockets
• You prefer a white ARGB aesthetic for your system

Skip if

• You require maximum cooling performance for overclocked high-wattage CPUs
• You need a cooler taller than 67 mm
• You prefer a black color scheme without lighting

Verdict: Thermalright AXP120-X67 White ARGB Low Profile is a capable low-profile cooler for compact builds. It fits users who need modern socket support and a specific aesthetic in tight spaces.

2 Also great

Thermalright Assassin X 120 White ARGB

Best for: Mid-tower builds with 125-225 W CPUs

Socket Compatibility

AM4, AM5, LGA 115X, 1200, 1700, 1851

Cooler Height

148 mm

Heat Pipes

4

Fan Size

120 mm

TDP Rating

125-225 W

Fan Speed

1550 RPM

View on Amazon: Thermalright Assassin X 120 White ARGB Affiliate link

This Thermalright cooler uses a 120 mm fan and four heat pipes to handle 125 to 225 W TDP loads. It features ARGB lighting and a quiet operation level of 25.6 dB(A). The 148 mm height fits medium cases. It supports modern Intel and AMD sockets. You get efficient cooling with low noise for standard desktop builds.

Pros

• Four 6 mm heat pipes with AGHP technology
• 120 mm PWM fan runs up to 1550 RPM
• ARGB lighting effects
• Noise level stays at 25.6 dB(A)
• Supports Intel LGA 1851 and AMD AM5

Cons

• 148 mm height limits use in small cases
• Single 120 mm fan may struggle with high-end chips
• Aluminum heat sink has lower thermal mass than copper

Good fit if

• You need a white ARGB cooler for mid-tower cases
• You build with Intel LGA 1700 or AMD AM5
• You want quiet operation under 26 dB(A)

Skip if

• You have a case with less than 148 mm clearance
• You run a high-TDP CPU over 225 W
• You need copper heat pipes for maximum performance

Verdict: Thermalright AX120 SE ARGB White fits users who need a 148 mm high white cooler for mid-tower cases. It handles 125 to 225 W loads quietly.

3 Best premium

Thermalright Peerless Assassin 120 White ARGB Cooler

Best for: high-performance cooling in standard ATX cases

Socket Compatibility

AM4 AM5/Intel 1700/1150/1151/1851

Cooler Height

155mm

Heat Pipes

6

Tower Design

Double tower

Fan Size

120mm

Fan Speed

1550rpm±10%

View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler Affiliate link

This dual-tower air cooler uses six 6mm heat pipes and two 120mm PWM fans to manage heat. The aluminum and copper construction supports Intel LGA 1700/1851 and AMD AM4/AM5 sockets. It reaches 1550 RPM with a maximum airflow of 66.17 CFM. The design includes ARGB lighting and stands 155 mm tall. You get strong cooling performance for standard ATX cases.

Pros

• Dual-tower design with six 6mm heat pipes
• Includes two 120mm PWM fans
• Supports Intel LGA 1700/1851 and AMD AM4/AM5 sockets
• ARGB lighting effects
• Maximum airflow of 66.17 CFM

Cons

• 155 mm height may not fit small cases
• 1.87 pounds weight adds load to motherboard
• No software control for fan speeds listed

Good fit if

• You need strong cooling for high-end CPUs
• You have a standard ATX case with 155 mm clearance
• You want ARGB lighting on your build

Skip if

• You have a small form factor case with low CPU cooler clearance
• You prefer a single-tower design for lower weight
• You need software control for fan curves

Verdict: Thermalright Peerless Assassin 120 SE ARGB White delivers robust cooling for power users with standard cases. It fits best if you prioritize thermal performance and visual appeal over compact size.

4 Best single tower

Thermalright Burst Assassin 120 ARGB

Best for: Medium cases needing reliable single-tower cooling

Socket Compatibility

AM4, AM5, LGA1700/1851/1150/1151/1200

Cooler Height

154 mm

Heat Pipes

6

Tower Design

Single-Tower

Fan Size

120 mm

Fan Speed

1550 RPM

View on Amazon: Thermalright Burst Assassin 120 ARGB Affiliate link

The Thermalright Burst Assassin 120 is a single-tower air cooler with a 154mm height. It uses six 6mm heat pipes with AGHP technology and a 120mm PWM fan. The fan reaches 1550 RPM with a maximum airflow of 66.17 CFM. Noise stays at or below 25.6 dB. It supports AM4, AM5, and Intel LGA sockets. This cooler suits medium-sized cases.

Pros

• Six pure copper heat pipes use AGHP technology to manage heat effectively.
• 120mm PWM fan provides up to 66.17 CFM airflow at 1550 RPM.
• ARGB lighting adds visual customization to your build.
• S-FDB bearings ensure a long industrial service life.

Cons

• 154mm height may not fit in small form factor cases.
• Single tower design offers less cooling capacity than dual tower models.
• Fan noise can reach 25.6 dB under maximum load.

Good fit if

• You need a cooler for a medium-sized ATX case.
• You want ARGB lighting on a budget single-tower cooler.
• You use an AM5 or LGA1700/1851 socket.

Skip if

• You have a compact ITX case with low clearance.
• You require a dual-tower design for extreme overclocking.
• You prefer a cooler without RGB lighting.

Verdict: Thermalright Burst Assassin 120 ARGB Single Tower delivers solid cooling for mid-tower builds. It fits users who need reliable performance and ARGB features without the bulk of a dual-tower design.

5 Also great

Thermalright Assassin King 120 SE White ARGB

Best for: Mid-size cases needing white ARGB cooling

Socket Compatibility

AM4, AM5, LGA 1700, 1851, 1200, 115X

Cooler Height

148mm

Heat Pipes

5

Fan Size

120mm

Fan Speed

1550 RPM

Lighting

ARGB

View on Amazon: Thermalright Assassin King 120 SE White ARGB Affiliate link

This is a white single-tower air cooler with a 120mm fan and five heat pipes. It measures 148mm in height and supports modern Intel and AMD sockets. The fan runs at 1550 RPM with ARGB lighting. It suits users who need a clean look and reliable cooling for mid-size cases without the bulk of larger coolers.

Pros

• Five heat pipes with AGHP III technology
• 120mm PWM fan with ARGB lighting
• Supports AM4, AM5, and LGA 1700/1851 sockets
• Low noise level of 25.6 dB(A)

Cons

• 148mm height limits fit in small cases
• Only five heat pipes compared to six-pipe rivals
• Single fan design offers less airflow than dual-fan models

Good fit if

• You want a white ARGB cooler for a mid-size case
• You use an AM5 or LGA 1700/1851 CPU
• You prefer a single-tower design for easier installation

Skip if

• You have a small ITX case with tight clearance
• You need extreme cooling for high-end overclocking
• You prefer a dual-fan cooler for maximum airflow

Verdict: Thermalright AK120 SE White ARGB 120mm Cooler fits users who want a compact white cooler with ARGB lighting for mid-size cases. It delivers solid cooling for standard builds without the bulk of larger towers.

6 Also great

Thermalright AXP120-X67 White ARGB Cooler

Best for: Small cases needing low-profile cooling

Cooler Height

67mm

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120mm

Fan Speed

1800 RPM

Lighting

ARGB

View on Amazon: Thermalright AXP120-X67 White ARGB Cooler Affiliate link

This low-profile air cooler stands 67mm tall, making it suitable for small form factor cases. It uses six 6mm copper heat pipes with AGHP technology to manage heat. The included 120mm PWM fan delivers up to 59 CFM of airflow while staying under 26.1 dB. It supports Intel LGA 1700 and AMD AM4 sockets. You get white ARGB lighting for your build.

Pros

• 67mm total height fits tight cases
• Six 6mm pure copper heat pipes
• 120mm PWM fan with 59 CFM airflow
• White ARGB lighting support
• AGHP technology for heat pipe orientation

Cons

• Limited to 67mm height restricts larger coolers
• Only supports AM4 and older Intel sockets
• No mention of modern LGA 1700 mounting hardware in features list

Good fit if

• You need a cooler under 70mm tall
• You build in a small form factor case
• You want white ARGB aesthetics

Skip if

• You have a modern Intel socket like LGA 1700 and need verified mounting
• You require a cooler taller than 67mm for better performance
• You prefer a black color scheme

Verdict: Thermalright AXP120-X67 White ARGB fits users who need a low-profile solution under 67mm tall. It offers solid airflow for its size but may lack mounting support for the latest Intel sockets.

7 Best budget

Thermalright Assassin King 120 White ARGB

Best for: Standard ATX cases with modern sockets

Socket Compatibility

AM4, AM5, LGA1700/1851/1150/1151/1200

Cooler Height

148mm

Heat Pipes

5

Tower Design

Single-Tower

Fan Size

120mm

Fan Speed

1550rpm±10%

View on Amazon: Thermalright Assassin King 120 White ARGB Affiliate link

This single-tower air cooler uses five copper heat pipes and a 120mm PWM fan to dissipate heat. It stands 148mm tall and weighs 0.64kg. The fan reaches 1550 RPM with a noise level under 25.6 dB. You get ARGB lighting and support for modern Intel and AMD sockets. It fits medium-sized cases well.

Pros

• Five pure copper heat pipes with AGHP III technology
• 120mm PWM fan runs up to 1550 RPM
• ARGB lighting effects on white finish
• Supports LGA 1700, LGA 1851, AM4, and AM5 sockets
• Noise level stays at or below 25.6 dB

Cons

• Single-tower design limits cooling capacity compared to dual-tower models
• 148mm height may not fit in small form factor cases
• Does not include software for ARGB control

Good fit if

• You need a white ARGB cooler for a standard ATX case
• You use an AM5 or LGA 1700 processor
• You prefer quiet operation under 26 dB

Skip if

• You require a dual-tower cooler for high-end CPUs
• Your case height is under 148mm
• You want a low-profile cooler under 100mm

Verdict: Thermalright AK120 SE White ARGB provides reliable cooling for mainstream builds with its five heat pipes and quiet 120mm fan. It is a solid match for users who want white aesthetics and modern socket support without needing extreme thermal headroom.

Specifications side by side

Frequently asked questions

See also

• thermalright argb fan hub controller alternatives
• vrmuxita white wardrobe alternatives