Ocypus Delta A40 SE BK ARGB Air CPU Cooler Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This ocypus delta a40 se bk argb air CPU cooler review focuses on a cooling solution designed for mainstream systems. It features a black finish with ARGB lighting and supports up to 190W TDP. The unit uses four direct-touch heat pipes and a PWM fan capable of 1800 RPM. You get flexible lighting options depending on your motherboard headers. It is a compact air cooler with specific dimensional constraints. This spec-based look helps you decide if it fits your build requirements.
What stands out
- Supports up to 190W TDP for high-performance CPUs.
- Four 6mm direct-touch heat pipes increase contact area.
- ARGB lighting syncs with 5V 3-pin headers or runs on 12V 4-pin.
- PWM fan reaches 1800 RPM with noise levels at or below 31dB(A).
- Compact dimensions of 5.79 inches in height.
Who it fits
Good fit for
You should consider this cooler if you have a CPU with a TDP up to 190W and a motherboard with a 5V ARGB header. It suits builds where case clearance is limited, as the 5.79-inch height is manageable in many mid-towers. The direct-touch heat pipes and family fin array provide efficient heat dissipation. If you want silent operation under load, the low noise rating is a plus. It is also good for users who prefer a black aesthetic.
Who should skip it
You should look elsewhere if your motherboard lacks ARGB headers and you want adjustable lighting effects, as the 12V 4-pin connection only provides fixed brilliance. Skip this if you need a cooler taller than 5.79 inches, as it will not fit in compact cases requiring more height. It is also not ideal if you require white lighting, as this specific model is black. Buyers needing extreme cooling for high-end processors may find the 190W limit insufficient.
Verdict: The Ocypus Delta A40 SE BK ARGB is a practical air cooler for mainstream CPUs with moderate thermal needs. Its compact size and flexible lighting make it a solid choice for standard builds.
Key specs explained
TDP Rating: 190W
This rating indicates the maximum heat output the cooler can handle. You can use it for processors that generate up to 190 watts of thermal energy. This makes the unit suitable for high-end desktop CPUs. When shopping, compare this number to your processor's rated TDP to ensure adequate cooling capacity for your specific build.
Heat Pipes: 4
The cooler uses four direct-touch heat pipes to move heat from the base to the fins. This design increases the surface area for heat dissipation. Four pipes are standard for mid-to-high performance air coolers. You should compare this count with other coolers to gauge their potential heat transfer speed and overall thermal efficiency.
Fan Speed: 1800 RPM
This is the maximum rotational speed of the included PWM fan. Higher speeds move more air but can increase noise levels. This speed helps maintain cooling performance under heavy loads. When comparing air coolers, check this maximum RPM alongside airflow ratings to understand how much air the fan can push through the fin stack.
Lighting: ARGB
ARGB allows for addressable RGB lighting effects that can be synchronized with your motherboard. The listing notes flexible connection options, including a mode for boards without headers. You can adjust colors and patterns if your system supports it. Compare this feature with other coolers if you want customizable aesthetic lighting for your case interior.
Design and build details
The listing describes a black finish with a custom-molded top cover. The surface features geometric lines and a textured finish. This design choice focuses on visual appeal rather than thermal performance. You will find the cooler in black or white, according to the available variations. The ARGB lighting adds color to your build. The connection options are flexible. If your motherboard lacks an ARGB header, you can connect only the fan connector for basic lighting. The lighting cannot be adjusted in this mode. If your board has a 5V 3-pin header, full sync is supported. This gives you control over the effects if your system allows it.
The cooler measures 5.79 inches in height, 4.84 inches in length, and 2.6 inches in width. It weighs 1.01 pounds. These dimensions fit most standard cases. The four 6mm heat pipes use direct-touch technology. This increases the contact area with the CPU surface. The heat pipes connect to a fin array designed for stable thermal conduction. This structure increases the heat dissipation area. The layout is straightforward, using mainstream components for heat transfer.
The PWM fan operates between 800 and 1800 RPM. It moves up to 60 CFM of air. The static pressure reaches 1.6 mmH2O. Noise stays at or below 31 dB. This balance suggests quiet operation under normal loads. The assembly is compatible with Intel and AMD mainstream platforms. The design prioritizes ease of installation and visual integration. You get a practical cooler with customizable lighting options.
Setup and everyday use guide
Installing this cooler involves mounting it to either Intel or AMD mainstream platforms. The listing notes that assembly is straightforward, so you should not need specialized tools for basic setup. The unit measures 4.84 inches in length, 2.6 inches in width, and 5.79 inches in height. You must verify that your case can accommodate these dimensions before purchase. The fan speed ranges from 800 to 1800 RPM. This range allows you to balance airflow against noise levels during daily tasks. The maximum noise output is listed as 31 dBA. You can expect quiet operation during light workloads when the fan runs at lower speeds.
Lighting setup depends on your motherboard. If your board lacks an ARGB header, you can connect the fan to a standard 12V 4-pin connector. This provides static lighting that cannot be adjusted. If your motherboard has a 5V 3-pin header, you can enable full ARGB synchronization. This lets you control colors through your system software. The cooler supports up to 190W TDP. You can use it for high-end desktop processors without worrying about immediate thermal limits. The four direct-touch heat pipes help transfer heat efficiently from the CPU to the fins. You do not need to worry about complex wiring if you choose the static lighting option. The design focuses on clear connectivity and standard mounting practices for easy integration into your build.
Before You Buy This Cooler
You need to verify your motherboard has a 5V 3-pin ARGB header if you want full lighting sync. Without it, the cooler still lights up, but you cannot adjust the effects. The fan speed ranges from 800 to 1800 RPM, so check your case airflow. Ensure your CPU socket is supported by Intel or AMD mainstream platforms. Keep the fins clean to maintain the 190W TDP rating. Dust buildup reduces efficiency over time. This model sits among other air coolers by offering flexible lighting options. If you prioritize silent operation, note the noise level is up to 31 dB. Compare its dimensions against your RAM height. The direct-touch heat pipes require proper contact with the IHS. This guide helps you decide if it fits your build alongside other thermal paste and cooler options.
Check before you buy
- Check for a 5V 3-pin ARGB header on your motherboard.
- Verify your CPU socket is compatible with Intel or AMD.
- Ensure your RAM does not block the 4.84-inch cooler height.
- Confirm your case supports a fan speed up to 1800 RPM.
The product at a glance
Ocypus Delta A40 SE ARGB Air Cooler
Best for: 190W TDP CPUs with basic ARGB needs
- Socket Compatibility
- AM4, AM5, LGA 115X/1200/1700/1851
- Heat Pipes
- 4
- Fan Size
- 120mm
- TDP Rating
- 190W
- Fan Speed
- 800-1800 RPM ± 10%
- Lighting
- ARGB
View on Amazon: Ocypus Delta A40 SE ARGB Air Cooler Affiliate link
The Ocypus Delta A40 SE BK ARGB is a black air cooler designed for CPUs up to 190W TDP. It uses four 6mm direct-touch heat pipes and a 120mm PWM fan. The fan reaches 1800 RPM with 60 CFM airflow. It includes ARGB lighting that syncs with 5V 3-pin headers. You can also use it without sync for constant illumination. It fits Intel and AMD platforms.
Pros
- Supports up to 190W TDP
- Four 6mm direct-touch heat pipes
- ARGB lighting with motherboard sync
- Fan noise stays at 31 dB max
Cons
- Lighting cannot be adjusted without ARGB header
- Fan speed range is limited to 1800 RPM
- No software control for lighting effects
Good fit if
- You need a cooler for 190W processors
- You want ARGB lighting without extra hubs
- You prefer silent operation under 31 dB
Skip if
- You require adjustable lighting effects
- You need fan speeds above 1800 RPM
- You want software-controlled RGB patterns
Verdict: The Ocypus Delta A40 SE ARGB CPU Cooler suits users who need 190W cooling with basic ARGB lighting. It fits builds that prioritize simple installation and low noise over customizable light shows.
Specifications side by side
| Spec | Ocypus Delta A40 SE ARGB Air Cooler |
|---|---|
| Socket Compatibility | AM4, AM5, LGA 115X/1200/1700/1851 |
| Heat Pipes | 4 |
| Fan Size | 120mm |
| TDP Rating | 190W |
| Fan Speed | 800-1800 RPM ± 10% |
| Lighting | ARGB |
| Color | Black |
| Features | Fan |
| Dimensions | 4.84 × 2.6 × 5.79 inches |
| Weight | 1.01 pounds |
| Model | Delta A40 SE BK ARGB |
Frequently asked questions
Does the Ocypus Delta A40 SE fit in standard mid-tower cases?
Yes, the cooler has a compact width of 2.6 inches. This slim profile allows it to clear most standard RAM sticks and fit within typical case dimensions. Its height of 5.79 inches and length of 4.84 inches are standard for air coolers, ensuring compatibility with many mainstream PC chassis without requiring extreme modifications.
How heavy is the Ocypus Delta A40 SE ARGB cooler?
The unit weighs 1.01 pounds. This moderate weight is manageable for standard motherboard mounting brackets. It is light enough to reduce stress on the CPU socket while remaining heavy enough to maintain solid contact with the heat spreader. You do not need additional support brackets for this mass.
What color options are available for this air cooler?
The model is listed in black. The finish features a custom-molded top cover with geometric lines and a textured surface. This design prioritizes visual appeal for your build. While the listing mentions black or white options generally, this specific SKU is the black variant with ARGB lighting.
Is the Ocypus Delta A40 SE suitable for high-TDP processors?
It supports up to 190W TDP. This rating indicates the maximum heat output the cooler can handle effectively. You can use it for high-end desktop CPUs that generate significant thermal energy. This makes it a viable option for powerful processors, provided your case has adequate airflow to dissipate the heat.
Does this cooler require a separate hub for its lighting?
No, the ARGB connection plugs directly into your motherboard. You need a 5V 3-pin ARGB header on your board to control the lighting effects. Without this header, the lights may still function but you cannot adjust the patterns. It does not use a separate controller or hub for sync.
What mounting platforms does this cooler support?
It is designed for both Intel and AMD mainstream platforms. The assembly is straightforward and does not require specialized tools for basic setup. You can install it on standard sockets found in current generation desktop systems. The mounting hardware is included to ensure compatibility with these common processor types.