MITXPC Dynatron LGA4189 Copper Heatpipe or MITXPC LGA 1700 Heatsink PWM? Which MITXPC Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The mitxpc dynatron n2 intel lga4189 vs q5 alder lake s lga comparison highlights two distinct cooling solutions from the same manufacturer. Both units are aluminum-based heatsinks designed for specific processor sockets. The primary difference lies in their target hardware and included components. The Dynatron N2 supports older FCLGA4189 sockets and relies on a specific airflow rating. The Q5 is built for modern LGA 1700 Alder Lake-S CPUs and includes a PWM fan in the package.
Key differences
| Aspect | Dynatron LGA4189 Copper Heatpipe Heatsink | MITXPC LGA 1700 Heatsink and PWM Fan |
|---|---|---|
| Socket Compatibility | FCLGA4189 | LGA 1700 |
| Compatible Device | Ice Lake, Cooper Lake | Alder Lake-S |
| TDP Support | 270W | 125W |
| Included Fan | Not listed | PWM Fan |
| Dimensions | Not listed | 4 x 4 x 3 inches |
Which one should you choose?
Choose Dynatron LGA4189 Copper Heatpipe Heatsink if
- You need a cooler for an Ice Lake or Cooper Lake processor on the FCLGA4189 socket.
- You require a heatsink rated for higher power consumption up to 270W.
- You already have a suitable fan and prefer a standalone aluminum heatsink with copper heatpipes.
Choose MITXPC LGA 1700 Heatsink and PWM Fan if
- You are building with a modern Alder Lake-S CPU on the LGA 1700 socket.
- You want a complete package that includes a PWM fan for immediate installation.
- You prefer a compact 4-inch tower design with known physical dimensions.
Verdict: Choose the Dynatron N2 if you are working with legacy FCLGA4189 hardware that demands higher thermal headroom. Select the Q5 if you are installing a current-generation LGA 1700 processor and need a fan included in the box.
Dynatron vs Q5: Key Specs
Socket Compatibility
You must match the heatsink to your specific CPU socket. The Dynatron LGA4189 Copper Heatpipe Heatsink is built exclusively for FCLGA4189 sockets, supporting Ice Lake and Cooper Lake processors. In contrast, the MITXPC LGA 1700 Heatsink and PWM Fan is designed for LGA 1700 sockets, covering Alder Lake-S CPUs. These sockets are not interchangeable. You cannot install the Dynatron on an LGA 1700 motherboard, nor can you use the Q5 on an FCLGA4189 board. This is a strict hardware requirement. Your choice depends entirely on which processor platform you are building or upgrading. One is for server-grade legacy chips, while the other is for modern desktop processors.
TDP Capacity
Thermal Design Power determines how much heat the cooler can dissipate. The Dynatron LGA4189 Copper Heatpipe Heatsink supports up to 270W TDP with 23CFM airflow. This high rating suits power-hungry server workloads. The MITXPC LGA 1700 Heatsink and PWM Fan supports 125W TDP. This is sufficient for standard desktop CPUs but lower than the Dynatron. If you are running high-end desktop chips near the 125W limit, the Q5 is adequate. However, if you need to cool a 200W+ server chip, the Dynatron is the only viable option. The Dynatron offers significantly higher thermal headroom for intensive tasks.
Included Fan
A heatsink requires a fan to move air across the fins. The MITXPC LGA 1700 Heatsink and PWM Fan includes a PWM fan in the box. This means you have a complete cooling solution ready to install immediately. The Dynatron LGA4189 Copper Heatpipe Heatsink does not list an included fan in its specifications. You will likely need to source a compatible fan separately, which adds to the setup complexity and potential cost. For users wanting a plug-and-play experience without hunting for extra parts, the Q5 is more convenient. The Dynatron assumes you may already have fans or need specific airflow characteristics.
Heat Pipe Material
Heat pipes transfer heat from the CPU to the fins efficiently. The Dynatron LGA4189 Copper Heatpipe Heatsink explicitly features copper heatpipes combined with an aluminum base and stacked fins. Copper conducts heat better than aluminum, improving thermal transfer speed. The MITXPC LGA 1700 Heatsink and PWM Fan lists aluminum dimensions but does not specify the internal heat pipe material in the provided data. It may use copper or aluminum pipes, but this is not confirmed. If copper heat pipes are critical for your thermal performance needs, the Dynatron provides that assurance. The Q5 material details remain unclear regarding the pipes.
Thermal Paste
Thermal paste ensures good contact between the CPU and heatsink. The Dynatron LGA4189 Copper Heatpipe Heatsink comes with pre-printed Shin-Etsu 7762 thermal grease. This is a high-quality paste often used in professional applications, saving you the step of buying separate paste. The MITXPC LGA 1700 Heatsink and PWM Fan does not mention pre-applied thermal paste in its specifications. You may need to apply paste manually if it is not included. Having pre-applied paste simplifies installation and ensures consistent coverage. The Dynatron offers a slight convenience advantage here with its included Shin-Etsu compound.
Which MITXPC Model Fits Your Needs
Server owners with Ice Lake or Cooper Lake CPUs
You need a heatsink for FCLGA4189 sockets. The Dynatron supports up to 270W TDP with 23CFM airflow. It uses an aluminum base with copper heatpipes for efficient heat transfer. The unit comes with pre-printed Shin-Etsu 7762 thermal grease. It also includes Intel standard anti-tilt rotating mounting sets for secure installation in server environments.
Desktop builders using Alder Lake-S processors
Your system uses an LGA 1700 socket. The Q5 heatsink is designed specifically for Alder Lake-S CPUs. It includes a PWM fan for active cooling. The unit measures 4 x 4 x 3 inches and weighs 1 pound. It handles up to 125W TDP. This makes it a compact and compatible choice for standard desktop motherboard builds.
Users prioritizing high thermal performance capacity
You require cooling for high-power processors. The Dynatron handles 270W TDP, which is significantly higher than the Q5's 125W limit. It achieves this with 23CFM airflow and copper heatpipes. The aluminum base and stacked fins provide substantial surface area. This makes it the better option for demanding workloads that generate more heat.
The products compared
Dynatron LGA4189 Copper Heatpipe Heatsink
Best for: FCLGA4189 Ice Lake and Cooper Lake CPUs
- Socket Compatibility
- FCLGA4189
- Material
- Aluminum Base, Copper Heatpipes
- Mounting Type
- Captive Mounting Sets
View on Amazon: Dynatron LGA4189 Copper Heatpipe Heatsink Affiliate link
The MITXPC Dynatron N2 is an air cooler built for FCLGA4189 sockets used in Ice Lake and Cooper Lake processors. It uses an aluminum base with copper heatpipes and stacked fins. The unit supports up to 270W TDP with 23CFM airflow. It comes with pre-printed Shin-Etsu 7762 thermal grease and uses standard captive mounting sets. This model is designed for specific server-grade platforms.
Pros
- Compatible with FCLGA4189 sockets
- Supports up to 270W TDP
- Copper heatpipes with aluminum base
- Pre-applied Shin-Etsu 7762 thermal grease
Cons
- Only fits FCLGA4189, not LGA1700
- Low 23CFM airflow for high TDP
- Aluminum fins may limit heat dissipation
Good fit if
- You use an Ice Lake or Cooper Lake CPU
- You need a cooler for FCLGA4189
- You want pre-applied thermal grease
Skip if
- You have an LGA1700 socket
- You need LGA115x support
- You want high airflow cooling
Verdict: MITXPC Dynatron N2 LGA4189 Cooler is a specialized solution for FCLGA4189 platforms. It fits users with Ice Lake or Cooper Lake processors who need a direct replacement for stock cooling.
MITXPC LGA 1700 Heatsink and PWM Fan
Best for: compact LGA 1700 builds
- Socket Compatibility
- LGA 1700
- Compatible Device
- Alder Lake-S CPU
- Dimensions
- 4 x 4 x 3 inches
- Features
- Fan
- Weight
- 1 pounds
View on Amazon: MITXPC LGA 1700 Heatsink and PWM Fan Affiliate link
The MITXPC Q5 is an aluminum heatsink designed for Alder Lake-S processors on the LGA 1700 socket. It measures 4 by 4 by 3 inches and weighs 1 pound. The unit includes a PWM fan to manage thermal output. It supports 125W TDP CPUs. This compact cooler suits small form factor builds where space is limited but reliable cooling is required.
Pros
- LGA 1700 socket compatibility
- Compact 4 x 4 x 3 inch footprint
- Includes PWM fan
- 1 pound weight
Cons
- Aluminum fins may offer less thermal mass than copper
- No mention of copper heatpipes in specifications
- Limited to 125W TDP support
Good fit if
- You use an LGA 1700 Alder Lake-S CPU
- You need a low-profile cooler for small cases
- You prefer a lightweight cooling solution
Skip if
- You have an LGA 4189 processor
- You require copper heatpipe construction
- You plan to overclock beyond 125W TDP
Verdict: MITXPC Q5 LGA 1700 Heatsink fits users with LGA 1700 CPUs who need a small, lightweight cooler. It does not support LGA 4189 or high-TDP overclocking.
Specifications side by side
| Spec | Dynatron LGA4189 Copper Heatpipe Heatsink | MITXPC LGA 1700 Heatsink and PWM Fan |
|---|---|---|
| Socket Compatibility | FCLGA4189 | LGA 1700 |
| Material | Aluminum Base, Copper Heatpipes | not stated |
| Compatible Device | not stated | Alder Lake-S CPU |
| Dimensions | not stated | 4 x 4 x 3 inches |
| Mounting Type | Captive Mounting Sets | not stated |
| Features | not stated | Fan |
| Weight | not stated | 1 pounds |
| Model | not stated | Q5 |
Frequently asked questions
Can I use the MITXPC Q5 heatsink on an LGA 4189 motherboard?
No, you cannot. The MITXPC Q5 is designed exclusively for LGA 1700 sockets. It is not compatible with LGA 4189 platforms. You must use the Dynatron model for FCLGA4189 processors. Using the wrong socket adapter can damage your hardware. Always verify socket compatibility before purchasing.
What material is the Dynatron heatsink made of?
The Dynatron heatsink uses copper and aluminum. Copper heatpipes help transfer heat away from the CPU efficiently. The aluminum fins provide surface area for cooling. This combination is standard for effective passive or active cooling in server environments. It is built for Ice Lake and Cooper Lake CPUs.
Does the Q5 model include a fan?
Yes, the MITXPC Q5 comes with a PWM fan. The product name specifies it includes the fan and heatsink. This makes it ready for installation on LGA 1700 systems. The fan ensures adequate airflow over the aluminum fins. You do not need to buy a separate fan for this unit.
Is the Dynatron suitable for overclocking high TDP CPUs?
The Dynatron is a specialized solution for FCLGA4189 platforms. It serves as a direct replacement for stock cooling. It is designed for Ice Lake and Cooper Lake processors. It is not intended for high-TDP overclocking scenarios. Use it for standard server workloads where reliability is key. Check your specific CPU TDP requirements.
How big is the MITXPC Q5 heatsink?
The Q5 heatsink measures four inches in width and length. Its height is three inches. It weighs one pound. These dimensions make it suitable for compact LGA 1700 builds. Ensure your case has enough clearance for these dimensions before installation. It is a small, lightweight cooler for standard desktops.
Which processor socket does the Dynatron support?
The Dynatron supports the FCLGA4189 socket. It is built for Ice Lake and Cooper Lake CPUs. This is a server-grade socket. It does not fit consumer desktop sockets like LGA 1700. Verify your motherboard socket type before buying. It is a specialized part for specific server platforms.
Can the Q5 fit in a small form factor case?
Yes, the Q5 is designed for compact LGA 1700 builds. Its dimensions are four by four by three inches. It weighs only one pound. This makes it a good choice for space-constrained systems. It provides necessary cooling without taking up much room. Check your case clearance for the three-inch height.