MITXPC Dynatron Threadripper EPYC CPU Cooler vs MITXPC LGA 1700 Heatsink PWM: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the mitxpc dynatron a39 socket strx4 vs q5 alder lake s lga. Both units are aluminum air coolers with fans. They share a simple, practical design. The main difference is their target platform. The Dynatron A39 supports high-end Threadripper and EPYC processors. The Q5 is built for standard LGA 1700 desktops. Your choice depends on your CPU socket.
Key differences
| Aspect | Dynatron Threadripper and EPYC CPU Cooler | MITXPC LGA 1700 Heatsink and PWM Fan |
|---|---|---|
| Socket Compatibility | sTRX4, TR4, SP3 | LGA 1700 |
| Compatible Device | Threadripper and EPYC Processors | Alder Lake-S CPU |
| TDP Support | Up to 280W | 125W |
| Heat Pipes | Embedded heatpipes | Not listed |
| Dimensions | 4.7" x 3.2" x 4.3" | 4" x 4" x 3" |
| Weight | 1.65 pounds | 1 pounds |
Which one should you choose?
Choose Dynatron Threadripper and EPYC CPU Cooler if
- You use a Threadripper or EPYC processor
- Your CPU has a TDP up to 280W
- You need embedded heatpipes for better heat transfer
Choose MITXPC LGA 1700 Heatsink and PWM Fan if
- You have an LGA 1700 motherboard
- Your CPU TDP is around 125W
- You prefer a lighter and more compact cooler
Verdict: The Dynatron A39 is the correct choice for high-performance workstation CPUs like Threadripper. The Q5 fits standard desktop builds with LGA 1700 sockets. Pick the model that matches your specific processor socket.
Specs: Threadripper vs LGA 1700
Socket Compatibility
The Dynatron A39 targets high-end desktop platforms. It supports sTRX4, TR4, and SP3 sockets. This covers AMD Threadripper and EPYC processors. The Q5 is built for Intel. It supports the LGA 1700 socket. This fits Alder Lake-S CPUs. You must choose based on your motherboard. These coolers do not share mounts. Pick the Dynatron for AMD Workstation rigs. Pick the Q5 for modern Intel desktops.
TDP Rating
Cooling capacity differs significantly between these units. The Dynatron A39 is rated for up to 280W TDP. This handles the heat from powerful Threadripper or EPYC chips. The Q5 is rated for 125W TDP. This suits standard Intel Core processors. If you run heavy rendering or compute tasks, the A39 has the advantage. For typical desktop gaming or office work, the Q5 is sufficient. Match the rating to your CPU power draw.
Heat Pipe Construction
The Dynatron A39 features embedded heat pipes. These are inside the aluminum heatsink. Heat pipes move heat from the base to the fins faster. This helps manage the high 280W load. The Q5 data does not list heat pipes. It is likely a simple aluminum block. This design is lighter but less efficient. For high heat output, the A39 construction is superior. The Q5 relies on direct aluminum contact.
Tower Dimensions
Size affects case compatibility and airflow. The Dynatron A39 measures 4.7 inches long, 3.2 inches wide, and 4.3 inches high. It is taller and slightly wider. The Q5 measures 4 inches long, 4 inches wide, and 3 inches high. It is shorter and wider. The A39 offers more fin surface area. The Q5 has a lower profile. Check your case clearance for both. The A39 may block RAM slots more easily.
Weight
Weight matters for motherboard support bracket stress. The Dynatron A39 weighs 1.65 pounds. This is heavier due to the heat pipes and larger mass. The Q5 weighs 1 pound. It is lighter and less demanding on the socket. A lighter cooler reduces strain on the CPU socket pins. This is a minor factor but relevant for long-term stability. The Q5 has the advantage here.
Which cooler fits your system
Threadripper or EPYC platform users
You need a cooler for high-end AMD processors. The Dynatron A39 supports sTRX4, TR4, and SP3 sockets. It handles up to 280W TDP. The aluminum heatsink includes embedded heatpipes for better heat transfer. It comes with pre-applied Shin-Etsu 7762 thermal grease. This ensures reliable contact without manual application. The 1.65-pound weight provides stability for heavy loads.
Intel LGA 1700 builders
You are building with an Alder Lake-S CPU. The Q5 heatsink is designed specifically for the LGA 1700 socket. It supports up to 125W TDP. The compact dimensions of 4 by 4 by 3 inches fit most standard cases. It weighs only 1 pound, making it lightweight. The included PWM fan allows for adjustable speed control based on temperature needs.
Users seeking minimal weight and size
You prefer a lighter and smaller cooling solution. The Q5 weighs just 1 pound compared to the Dynatron's 1.65 pounds. Its footprint is 4 by 4 inches, which is slightly narrower in length than the Dynatron. The height is 3 inches, making it lower profile. This compact design reduces strain on the motherboard socket. It is a practical choice for space-constrained builds.
The products compared
Dynatron Threadripper and EPYC CPU Cooler
Best for: Threadripper and EPYC workstations
- Socket Compatibility
- sTRX4, TR4, SP3
- Material
- Aluminum
- Cooling Method
- Fan
- Compatible Device
- Threadripper and EPYC Processors
- Dimensions
- 4.7" x 3.2" x 4.3"
- Weight
- 1.65 pounds
View on Amazon: Dynatron Threadripper and EPYC CPU Cooler Affiliate link
The MITXPC Dynatron A39 is an aluminum air cooler designed for sTRX4, TR4, and SP3 sockets. It supports up to 280W TDP using embedded heatpipes and a fan. The unit measures 4.7 by 3.2 by 4.3 inches and weighs 1.65 pounds. It comes with pre-applied Shin-Etsu 7762 thermal grease. This cooler suits users building Threadripper or EPYC systems who need reliable cooling for high-power processors.
Pros
- Supports 280W TDP for high-end CPUs
- Compatible with sTRX4, TR4, and SP3 sockets
- Aluminum heatsink with embedded heatpipes
- Pre-applied Shin-Etsu 7762 thermal grease
Cons
- Aluminum construction limits heat dissipation compared to copper
- Lacks RGB lighting or software control features
- Fixed fan speed with no PWM speed adjustment mentioned
Good fit if
- You are building a Threadripper workstation
- You need a cooler for EPYC processors
- You prefer a simple plug-and-play setup
Skip if
- You use LGA 1700 or AM5 sockets
- You need RGB lighting effects
- You want active fan speed control
Verdict: MITXPC Dynatron A39 for Threadripper is a straightforward air cooler for sTRX4 and SP3 platforms. It fits users who need basic, high-TDP cooling without extra features.
MITXPC LGA 1700 Heatsink and PWM Fan
Best for: Standard LGA 1700 desktop builds
- Socket Compatibility
- LGA 1700
- Compatible Device
- Alder Lake-S CPU
- Dimensions
- 4 x 4 x 3 inches
- Features
- Fan
- Weight
- 1 pounds
View on Amazon: MITXPC LGA 1700 Heatsink and PWM Fan Affiliate link
This MITXPC Q5 heatsink is designed for Alder Lake-S processors on the LGA 1700 socket. It measures 4 by 4 by 3 inches and weighs 1 pound. The unit includes a PWM fan for active cooling. It supports a 125W TDP. This compact cooler suits users who need a straightforward air cooling solution for standard desktop builds.
Pros
- Compatible with LGA 1700 socket
- Includes PWM fan
- Compact 4x4x3 inch footprint
- Rated for 125W TDP
Cons
- Limited to LGA 1700 socket only
- Single fan configuration
- No mention of RGB lighting
Good fit if
- You are building an LGA 1700 desktop
- You need a compact air cooler
- You prefer a simple fan setup
Skip if
- You use an AMD or Intel socket other than LGA 1700
- You require multi-fan cooling
- You need RGB lighting effects
Verdict: MITXPC Q5 LGA 1700 Heatsink fits users who need a basic, compact air cooler for Alder Lake-S CPUs. It offers straightforward cooling without extra features.
Specifications side by side
| Spec | Dynatron Threadripper and EPYC CPU Cooler | MITXPC LGA 1700 Heatsink and PWM Fan |
|---|---|---|
| Socket Compatibility | sTRX4, TR4, SP3 | LGA 1700 |
| Material | Aluminum | not stated |
| Cooling Method | Fan | not stated |
| Compatible Device | Threadripper and EPYC Processors | Alder Lake-S CPU |
| Dimensions | 4.7" x 3.2" x 4.3" | 4 x 4 x 3 inches |
| Features | Fan | Fan |
| Weight | 1.65 pounds | 1 pounds |
| Model | A39 | Q5 |
Frequently asked questions
Can the MITXPC Dynatron A39 fit in a standard mid-tower case?
The Dynatron A39 has a height of 4.3 inches. This dimension determines if it clears your RAM modules or fits within your case limits. You should measure the maximum cooler height your chassis supports before purchasing. The unit weighs 1.65 pounds, which is standard for this class of air cooler.
Is the MITXPC Q5 compatible with LGA 1700 motherboards?
Yes, the Q5 is designed specifically for the LGA 1700 socket. It supports Alder Lake-S processors from Intel. This makes it a direct fit for modern 12th, 13th, and 14th Gen Intel Core CPUs. It does not support AMD sockets or older Intel platforms.
What is the weight difference between the Dynatron A39 and the Q5?
The Dynatron A39 weighs 1.65 pounds, while the Q5 weighs 1 pound. This difference reflects the larger heatsink mass required for high-TDP Threadripper and EPYC platforms. The Q5 is lighter due to its smaller aluminum block designed for standard desktop CPUs.
Does the Dynatron A39 support the SP3 socket?
Yes, the Dynatron A39 supports the SP3 socket. It is also compatible with sTRX4 and TR4 sockets. This broad compatibility makes it suitable for various AMD Threadripper and EPYC workstations. You do not need a different cooler for different high-end AMD platforms.
How wide is the MITXPC Q5 heatsink?
The Q5 heatsink is 4 inches wide. This width allows it to cover the full surface of LGA 1700 processors effectively. It also ensures it fits within standard case widths without interfering with side panels or other components.
Which cooler is better for a Threadripper build?
The Dynatron A39 is the correct choice for Threadripper builds. It supports the sTRX4 and SP3 sockets used by these processors. The Q5 only supports LGA 1700 and will not physically or electrically fit a Threadripper motherboard. Choose the A39 for high-end AMD platforms.
What are the dimensions of the MITXPC Dynatron A39?
The Dynatron A39 measures 4.7 inches in length, 3.2 inches in width, and 4.3 inches in height. These dimensions define its footprint on the motherboard and its height clearance. Ensure your case supports a cooler height of at least 4.3 inches.
Does the Q5 include a PWM fan?
Yes, the product name includes PWM fan. This indicates the fan supports variable speed control based on CPU temperature. This feature helps balance cooling performance and noise levels. The Dynatron A39 also includes a fan for active cooling.