LPLMOOM LGA 1700 Copper Core CPU Cooler Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This lplmoom CPU cooler aluminum heatsink review focuses on a budget-friendly replacement for Intel LGA1700 systems. The unit is designed for 65W TDP processors, such as the i5-12400. It combines a copper core base with a dense aluminum heatsink to manage heat. The fan supports PWM control, allowing speeds from 900 to 3000 RPM. This configuration aims to balance cooling performance with operational noise levels. The cooler fits directly onto LGA1700 motherboards without requiring additional tools. It serves as a practical upgrade for users replacing stock cooling solutions.
What stands out
- Copper core base for efficient heat conduction
- Dense aluminum heatsink for stable thermal performance
- PWM fan speed range of 900 to 3000 RPM
- Pre-installed mounting clips for easy LGA1700 installation
Who it fits
Good fit for
This cooler suits users with 65W TDP Intel 12th Gen Alder Lake processors. It is ideal for those needing a straightforward replacement for worn-out stock coolers. The pre-installed clips make it suitable for builders who want a tool-free setup. If you prioritize a budget-friendly upgrade that maintains solid thermal performance, this model fits your needs. The PWM feature allows you to adjust noise levels based on your preference.
Who should skip it
You should look elsewhere if your CPU exceeds 65W TDP. This cooler is not designed for high-end processors that generate more heat. If you require a taller cooler for better airflow in compact cases, note that the height is 2.99 inches for this specific variation. Users needing extensive customization or advanced fan curves may find the basic PWM control limiting. This is a basic solution, not a high-performance enthusiast choice.
Verdict: This cooler offers a practical, spec-driven upgrade for 65W LGA1700 CPUs. It balances cost and basic cooling needs effectively.
Key specs explained for this cooler
TDP Rating: 65W
This rating indicates the maximum heat output the cooler is designed to dissipate. You should match this to your CPU's thermal design power. It suits 65W processors like the i5-12400. If your CPU exceeds this, the cooler may struggle. Check your processor specs to ensure this limit is sufficient for your specific chip's heat generation.
Socket Compatibility: LGA1700
This specifies the motherboard socket type the cooler fits. It is built for Intel 12th Gen Alder Lake and newer LGA1700 platforms. You must verify your motherboard has this socket before buying. It will not fit older LGA1200 or AMD sockets. This ensures the mounting hardware aligns correctly with your board's screw holes.
Fan Speed: 3000 RPM
This is the maximum rotational speed of the fan. Higher speeds move more air but increase noise. This value represents the peak performance setting. You can likely run it lower for quieter operation if your system allows PWM control. Compare this to other coolers to gauge potential airflow capacity and acoustic output under load.
Material: Copper, Aluminum
This describes the heatsink construction. The copper core base conducts heat away from the CPU quickly. The aluminum fins then dissipate that heat into the air. This combination balances cost and efficiency. Aluminum is lighter and cheaper, while copper offers superior thermal conductivity. Look for this mix in budget air coolers for reliable performance.
Design and build details
The LPLMOOM cooler uses a copper core base paired with an aluminum heatsink. According to the listing, this combination aims to balance heat conduction speed with cost efficiency. The fan frame is constructed from plastic, which keeps the overall weight low. This material choice suggests a focus on budget-friendly replacement rather than premium durability. You get a functional unit that prioritizes basic thermal performance over heavy-duty construction.
Dimensions are compact, measuring 4.3 inches in length, 3.14 inches in width, and 2.99 inches in height. These measurements fit standard LGA1700 sockets without requiring excessive clearance. The low profile means it should work in mid-tower cases where RAM or side panels might interfere with taller coolers. The listing notes pre-installed mounting clips, which simplifies installation on compatible motherboards. You do not need extra tools to secure the unit firmly to the board.
The finish is black, matching the color option listed as BLACK-C. The fan features a PWM 4-pin header, allowing you to adjust speeds between 900 and 3000 RPM. This control lets you balance noise levels against airflow needs. The dense aluminum fins are designed to maximize surface area for heat dissipation. This layout supports stable cooling for 65W processors like the i5-12400. The design is straightforward, focusing on essential cooling capabilities for everyday desktop use.
Installation and daily operation
You install this cooler by attaching it directly to your LGA1700 motherboard. The listing states that pre-installed mounting clips are included. This design means you do not need extra tools for the initial setup. The unit is tailored specifically for Intel 12th Gen Alder Lake processors. It fits sockets like the one used by the i5-12400. You simply align the clips with the motherboard holes and secure the base. The copper core base sits flush against the CPU to conduct heat away efficiently. The dense aluminum fins then dissipate that heat into the case airflow. For daily use, the fan connects to a 4-pin PWM header on your motherboard. This connection allows your system to adjust the speed automatically. The fan can run between 900 and 3000 RPM. At lower speeds, it reduces noise while maintaining basic cooling. At higher speeds, it maximizes airflow for heavier loads. The plastic fan frame adds durability without adding significant weight. The overall height is 2.99 inches for this specific variation. You must ensure your RAM or case sides have enough clearance for this dimension. The cooler is designed to handle the thermal output of 65W TDP chips. This makes it a practical replacement for stock coolers that may have worn out. The black color matches most standard PC cases. You get stable operation without complex configuration, as the PWM curve is optimized by the manufacturer.
Check case fit and TDP
Before you buy this LPLMOOM cooler, check your case clearance. The listed height is 2.99 inches, but variations exist at 2.36 and 1.85 inches. Measure your CPU socket area to ensure the 4.3 by 3.14 inch footprint fits without blocking RAM slots. This unit targets 65W TDP chips like the i5-12400. It is not designed for high-end 125W or 250W processors. You will need a motherboard with a 4-pin PWM header to control the fan speed between 900 and 3000 RPM. Dust accumulation reduces efficiency over time. Clean the aluminum fins with compressed air every few months to maintain airflow. This model serves as a direct replacement for stock Intel coolers. It offers basic thermal management for entry-level builds. If you plan to overclock your CPU, this budget option may not provide sufficient headroom. Consider higher-spec air coolers for sustained heavy loads. Verify your motherboard manual for LGA1700 mounting hole patterns before purchasing.
Check before you buy
- Verify 2.99 inch height fits your case
- Confirm 65W TDP matches your CPU
- Ensure 4-pin PWM header is available
- Check RAM clearance against cooler width
The product at a glance
LPLMOOM LGA 1700 Copper Core CPU Cooler
Best for: 65W Intel LGA 1700 CPU replacements
- Socket Compatibility
- LGA1700
- TDP Rating
- 65W
- Fan Speed
- 3000 RPM
- Color
- Black
- Material
- Copper, Aluminum
- Features
- Fan
View on Amazon: LPLMOOM LGA 1700 Copper Core CPU Cooler Affiliate link
This LPLMOOM cooler is designed for Intel LGA 1700 sockets, supporting 65W TDP processors like the i5-12400. It uses a copper core base with an aluminum heatsink for heat transfer. The fan reaches 3000 RPM via PWM control. Its compact dimensions are 4.3 by 3.14 by 2.99 inches. It fits users needing a direct replacement for stock cooling on compatible motherboards.
Pros
- Copper core base for efficient heat conduction
- PWM fan speed adjustable up to 3000 RPM
- Pre-installed mounting clips for tool-free installation
- Compatible with Intel LGA 1700 socket
Cons
- Limited to 65W TDP capacity
- Plastic fan frame construction
- No mention of noise level in decibels
Good fit if
- You need a replacement cooler for an LGA 1700 motherboard
- Your CPU has a 65W TDP rating
- You want a simple plug-and-play installation
Skip if
- You require cooling for high-TDP processors above 65W
- You prefer metal fan frames for durability
- You need compatibility with AMD sockets
Verdict: LPLMOOM LGA 1700 Copper Core Cooler is a basic option for users with 65W Intel LGA 1700 CPUs who need a straightforward replacement for their existing cooler. It offers essential cooling for entry-level builds without extra features.
Specifications side by side
| Spec | LPLMOOM LGA 1700 Copper Core CPU Cooler |
|---|---|
| Socket Compatibility | LGA1700 |
| TDP Rating | 65W |
| Fan Speed | 3000 RPM |
| Color | Black |
| Material | Copper, Aluminum |
| Features | Fan |
| Dimensions | 4.3 × 3.14 × 2.99 inches |
| Model | M23901-001 CPU Cooler |
Frequently asked questions
Does this cooler support AMD sockets?
No, it is designed exclusively for Intel LGA 1700 motherboards. The mounting mechanism and base are specific to that socket type. You cannot install it on AM4 or AM5 platforms without significant modification, which is not recommended. Stick to LGA 1700 systems for proper fit and safety.
What is the physical size of the heatsink?
The unit measures 4.3 inches in length, 3.14 inches in width, and 2.99 inches in height. These dimensions define the footprint on your motherboard and the clearance required in your case. Ensure your case supports heights up to 2.99 inches to avoid interference with side panels or RAM.
Is the base made of pure copper?
The product listing specifies a copper core base combined with an aluminum heatsink. This construction aims to provide efficient heat transfer from the CPU to the fins. The aluminum portion helps dissipate that heat into the airflow generated by the fan. It is not a solid copper block.
Can I use this for an 125W CPU?
It is rated for 65W processors. Using it on a higher TDP CPU, such as a 125W model, may lead to insufficient cooling. The thermal design is intended for entry-level or mid-range 65W chips. For higher power draws, you should look for a cooler with a higher TDP rating.
Does it include RGB lighting?
The specifications do not mention any RGB or addressable LED features. The color listed is black, suggesting a standard, non-illuminated design. If you require aesthetic lighting effects, this basic model likely does not support them. It focuses on functional cooling rather than visual customization.
Is installation difficult on LGA 1700 boards?
Installation is straightforward as it uses pre-installed mounting clips. You attach the unit directly to the motherboard without needing extra tools. The design is tailored specifically for Intel LGA 1700 sockets. This simplifies the process compared to coolers that require separate brackets or screws for each board.
What fan speed does this cooler use?
The provided data does not specify the exact RPM or airflow rating of the fan. It only confirms the presence of a fan component. You should check the full product listing for specific noise levels and speed settings. The focus here is on the heatsink material and socket compatibility.