Looking Beyond the LPLMOOM LGA 1700 Copper Core CPU Cooler? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The LPLMOOM LGA 1700 Copper Core CPU Cooler offers a straightforward solution for users needing a basic replacement for stock cooling on 65W Intel processors. Its copper core base paired with an aluminum heatsink provides adequate airflow for non-overclocked builds, while the included PWM fan allows for adjustable speeds between 900 and 3000 RPM. This setup ensures quiet operation and simple installation without extra tools, making it a practical choice for standard desktops.
However, you might look for lplmoom CPU cooler aluminum heatsink alternatives if your case has tight height restrictions or if you require support for higher TDP processors. Some users may also prefer different mounting systems or additional features like ARGB lighting. The 6 alternatives on this list were selected because their specifications overlap with the original, covering various socket compatibilities and physical dimensions. Whether you need a low-profile design for a compact case or a dual-tower cooler for enhanced thermal performance, these options provide distinct spec combinations to match your specific hardware requirements.
How the Alternatives Compare
Cooler Master i70C ARGB Low-Profile Cooler
The Cooler Master i70C ARGB offers ARGB lighting, which the LPLMOOM lacks. It supports both LGA 1700 and LGA 1851 sockets, providing broader future compatibility. Its height is 2.76 inches, slightly shorter than the LPLMOOM’s 2.99 inches, making it better for tight cases. However, it does not list a specific TDP rating. You get a 14.5-ounce unit with a 4.72-inch width. Choose this if you need low-profile clearance and lighting effects in a compact build.
ZYZMOON LGA1700 65W CPU Cooler
The ZYZMOON cooler is significantly shorter at 1.8 inches compared to the LPLMOOM’s 2.99 inches. It weighs 11.2 ounces, making it lighter. Like the LPLMOOM, it targets 65W Intel processors and uses a copper core with an aluminum heatsink. It lacks explicit fan speed data. Its square footprint measures 3.9 inches on each side. This option suits users who need minimal height for RAM clearance or small form-factor cases while retaining basic copper-core heat transfer for 65W CPUs.
Cooler Master Hyper 212 Halo CPU Cooler
The Cooler Master Hyper 212 Halo uses a 120mm fan, whereas the LPLMOOM uses a smaller unit. It is 6.06 inches long, longer than the LPLMOOM’s 4.3 inches. It supports AM5 and LGA 1700 sockets. It features ARGB lighting, which the LPLMOOM does not. The heatsink is aluminum only, lacking a copper base. It weighs 1.53 pounds. This cooler is better for users who want a standard 120mm fan for better airflow in compact cases, accepting the loss of a copper base for that fan size.
Zalman 135mm Black CPU Cooler
The Zalman CNPS 10X Performa uses a 135mm fan, larger than the LPLMOOM’s fan. It supports LGA 1700 and handles up to 180W TDP, far exceeding the LPLMOOM’s 65W rating. It weighs 1.9 pounds, much heavier than the LPLMOOM. It features a copper heatsink, not just a base. Its height is 6.1 inches, significantly taller than the LPLMOOM’s 2.99 inches. Choose this if you need high airflow for powerful CPUs and have a case with ample height for a large fan.
Thermalright Peerless Assassin 120 Black Cooler
The Thermalright Peerless Assassin 120 has a dual-tower design with six heat pipes, offering superior cooling over the LPLMOOM’s single fan and copper core. It supports LGA 1700, AM4, AM5, LGA 1851, and LGA 1200. It weighs 2 pounds. Its height is 6.24 inches, much taller than the LPLMOOM. It is aluminum only. This cooler is for users prioritizing thermal performance in mid-tower cases. It sacrifices low profile and simplicity for robust heat dissipation across multiple platforms.
Cooler Master Hyper 212 Black V2
The Cooler Master Hyper 212 Black V2 is 5.98 inches tall, taller than the LPLMOOM’s 2.99 inches. It supports AM5 and LGA 1700. It weighs 1.54 pounds. It is aluminum only, lacking the LPLMOOM’s copper base. It has no ARGB lighting. This cooler is designed for quiet operation and standard aesthetics. Pick this if you want a proven single-tower cooler for standard LGA 1700 builds where silence and clean looks matter more than a copper base or compact height.
Quick picks
Our 7 picks
LPLMOOM LGA 1700 Copper Core CPU Cooler
Best for: basic 65W LGA 1700 cooling replacements
- Socket Compatibility
- LGA1700
- TDP Rating
- 65W
- Fan Speed
- 3000 RPM
- Color
- Black
- Material
- Copper, Aluminum
- Features
- Fan
View on Amazon: LPLMOOM LGA 1700 Copper Core CPU Cooler Affiliate link
The LPLMOOM M23901-001 is an aluminum heatsink with a copper core base designed for Intel LGA 1700 sockets. It supports 65W TDP processors like the i5-12400. The unit includes a PWM fan running up to 3000 RPM. Its compact dimensions of 4.3 by 3.14 by 2.99 inches fit standard cases. You get pre-installed mounting clips for straightforward installation without extra tools.
Pros
- Copper core base for faster heat conduction
- PWM fan adjustable from 900 to 3000 RPM
- Pre-installed mounting clips for tool-free setup
- Compatible with Intel LGA 1700 sockets
Cons
- Limited to 65W TDP processors
- Plastic fan frame may reduce longevity
- No RGB lighting features included
Good fit if
- You need a direct replacement for a stock Intel cooler
- You use a 65W TDP LGA 1700 processor
- You prefer a simple, no-fuss installation process
Skip if
- You plan to overclock your CPU beyond 65W
- You require RGB lighting for your build
- You have a case with strict RAM clearance limits
Verdict: LPLMOOM LGA 1700 Copper Core Cooler serves users needing a basic, reliable replacement for stock cooling on 65W Intel processors. It offers straightforward installation and adequate airflow for non-overclocked builds.
Cooler Master i70C ARGB Low-Profile Cooler
Best for: Compact cases with mid-range Intel CPUs
- Socket Compatibility
- LGA 1700, LGA 1851
- Cooler Height
- 70mm
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- TDP Rating
- 95W
- Fan Speed
- 1,800 RPM
View on Amazon: Cooler Master i70C ARGB Low-Profile Cooler Affiliate link
The Cooler Master i70C is a low-profile air cooler designed for Intel LGA 1700 and LGA 1851 sockets. It features a 70mm tower height, making it suitable for compact cases. The unit uses aluminum fins and a copper insert base to handle up to 95W TDP. A 120mm ARGB fan adjusts speed from 650 to 1,800 RPM. This cooler suits users needing minimal height with customizable lighting.
Pros
- 70mm low-profile tower design fits small chassis
- Copper insert base supports 95W TDP CPUs
- 120mm PWM fan offers adjustable speeds up to 1,800 RPM
- ARGB lighting with frosted blades for visual effects
- Simplified brackets for easy LGA 1700/1851 installation
Cons
- 95W TDP rating limits use for high-end processors
- 70mm height restricts RAM clearance in tight builds
- No mention of pump or liquid cooling components
Good fit if
- You need a cooler under 70mm for a small form factor case
- You use an Intel Core i3 or i5 with 95W TDP
- You want ARGB lighting without a complex setup
Skip if
- You have a high-TDP CPU exceeding 95W
- You require a tower taller than 70mm for better airflow
- You need compatibility with AMD sockets
Verdict: Cooler Master i70C Low Profile is a practical option for compact builds using mid-range Intel CPUs. It fits users who prioritize case compatibility and lighting over raw cooling power.
ZYZMOON LGA1700 65W CPU Cooler
Best for: 65W Intel Core Ultra 2 series CPUs
- Socket Compatibility
- LGA1700
- TDP Rating
- 65W
- Fan Speed
- 3000 RPM
- Color
- Black
- Material
- Copper, Aluminum
- Features
- Fan
View on Amazon: ZYZMOON LGA1700 65W CPU Cooler Affiliate link
This ZYZMOON cooler replaces stock Intel Laminar RM2 units for LGA1700 processors. It uses a copper base with aluminum fins for heat transfer. The 4-pin PWM fan runs from 900 to 3000 RPM. It supports 65W TDP chips like the Core Ultra 5 225. The unit measures 3.9 by 3.9 by 1.8 inches. It fits users needing a direct socket replacement.
Pros
- Copper base plate for efficient heat transfer
- PWM fan speeds up to 3000 RPM
- Direct screw mounting to LGA1700 socket
- Pre-applied thermal paste included
Cons
- Limited to 65W TDP processors
- No ARGB lighting features
- Single fan configuration limits airflow
Good fit if
- You use a 65W Intel Core Ultra CPU
- You need a direct LGA1700 replacement
- You prefer quiet operation under 35 dBA
Skip if
- You have a CPU over 65W TDP
- You want RGB lighting effects
- You need high airflow for overclocking
Verdict: ZYZMOON LGA1700 Copper Core Cooler is a functional replacement for stock Intel coolers. It suits owners of 65W Core Ultra processors who want simple, quiet cooling without extra features.
Cooler Master Hyper 212 Halo CPU Cooler
Best for: compact cases with LGA 1700 CPUs
- Cooler Height
- 154mm
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 2050 RPM
- Lighting
- ARGB
- Socket Compatibility
- AM5, LGA 1700
View on Amazon: Cooler Master Hyper 212 Halo CPU Cooler Affiliate link
The Cooler Master 212 Halo is a compact air cooler with a black aluminum finish. It uses four 6mm copper heat pipes and a 120mm fan reaching 2050 RPM. The unit stands 154mm tall, making it suitable for smaller cases. It supports LGA 1700 and AM5 sockets. You get addressable RGB lighting compatible with 3-pin headers. This model prioritizes a low profile without sacrificing basic cooling throughput.
Pros
- Four 6mm copper heat pipes for direct contact
- Compact 154mm height for small form factors
- 120mm fan delivers 51.88 CFM airflow
- ARGB lighting with auto-detection on 3-pin headers
Cons
- Single fan limits total cooling capacity
- Aluminum fins are less conductive than pure copper
- No software control for RGB lighting mentioned
Good fit if
- You need a low-profile cooler under 160mm
- You have an LGA 1700 or AM5 socket
- You want ARGB lighting without complex setup
Skip if
- You require dual-fan performance for high TDP CPUs
- You need software-based RGB synchronization
- You prefer a pure copper heatsink construction
Verdict: Cooler Master 212 Halo 120mm ARGB fits users needing a short cooler for compact cases. It offers reliable airflow for standard processors but lacks the headroom of larger dual-fan designs.
Zalman 135mm Black CPU Cooler
Best for: High airflow cooling with RAM clearance
- Socket Compatibility
- LGA1700, LGA1200, LGA115X, AM4
- Heat Pipes
- 4
- Fan Size
- 135mm
- TDP Rating
- 180W
- Fan Speed
- 1500 RPM
- Color
- Black
View on Amazon: Zalman 135mm Black CPU Cooler Affiliate link
This cooler uses a large 135mm fan to move 75 CFM of air. It features four heat pipes with Direct Touch Heatpipe technology for efficient heat transfer. The unit supports LGA 1700 and handles up to 180W TDP. Its asymmetric design helps clear RAM modules. It suits users who need strong cooling with moderate noise levels.
Pros
- 135mm fan size moves up to 75 CFM
- Four heat pipes with Direct Touch Heatpipe technology
- Handles up to 180W TDP
- Asymmetric heatsink design aids RAM clearance
Cons
- Max noise level reaches 27dB
- Fan speed is not adjustable beyond motherboard PWM control
- No RGB lighting included in specifications
Good fit if
- You need high airflow for high TDP CPUs
- You require clearance for tall RAM sticks
- You prefer quiet operation at moderate loads
Skip if
- You need RGB lighting effects
- You require a low-profile cooler
- You want a smaller 120mm fan size
Verdict: Zalman CNPS 10X Performa 135mm Fan delivers solid cooling for 180W processors. It fits users who prioritize airflow and RAM clearance over visual flair.
Thermalright Peerless Assassin 120 Black Cooler
Best for: LGA 1700 and AM4 high-TDP builds
- Cooler Height
- 157 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- TDP Rating
- 245 W
- Fan Speed
- 1500 RPM
View on Amazon: Thermalright Peerless Assassin 120 Black Cooler Affiliate link
The Thermalright PA120 Black uses a dual-tower aluminum design with six 6mm copper heat pipes and a 245W TDP rating. It includes a 120mm PWM fan and fits LGA 1700 and AM4 sockets. This cooler suits users needing strong airflow for high-performance CPUs. Its 157mm height requires checking case clearance. The offset layout helps avoid GPU interference.
Pros
- Six 6mm pure copper heat pipes with AGHP technology
- 245W TDP rating for high thermal loads
- Dual-tower aluminum heatsink with 9600cm² dissipation area
- Supports Intel LGA 1700 and AMD AM4 sockets
Cons
- 157mm height may not fit smaller cases
- No RGB lighting included in this black model
- Single 120mm fan limits total airflow compared to dual-fan setups
Good fit if
- You need a high-TDP cooler for LGA 1700 or AM4
- You have a mid-tower case with 157mm+ clearance
- You prefer a non-RGB black aesthetic
Skip if
- Your case height limit is under 157mm
- You require ARGB lighting effects
- You are building a compact ITX system
Verdict: Thermalright PA120 Black Dual-Tower Cooler delivers robust cooling for LGA 1700 and AM4 platforms. It fits users prioritizing thermal performance over aesthetics in standard mid-tower cases.
Cooler Master Hyper 212 Black V2
Best for: Quiet LGA 1700 builds with standard RAM
- Socket Compatibility
- LGA1700, LGA1200, AM4, AM5
- Heat Pipes
- 4
- Fan Size
- 120mm
- Fan Speed
- 2500 RPM
- Color
- Black
- Material
- Aluminum
View on Amazon: Cooler Master Hyper 212 Black V2 Affiliate link
This air cooler uses four 6mm copper heat pipes and a 120mm fan to manage heat. The brushed aluminum finish helps lower noise levels while maintaining performance. It supports LGA 1700 and AM5 sockets. The design fits most RAM and cases due to its compact height. You get reliable cooling for standard desktop builds without needing complex RGB setups.
Pros
- Four 6mm copper heat pipes for direct contact
- 120mm fan delivers 70.3 CFM airflow
- Nickel-plated black aluminum heatsink for better radiation
- Compatible with LGA 1700 and AM5 sockets
Cons
- Single 120mm fan limits total airflow capacity
- No RGB lighting or software control included
- Heatsink height is 5.98 inches, which may block tall RAM
Good fit if
- You need a quiet, no-nonsense cooler for LGA 1700
- You want a black aluminum finish that matches your build
- You have standard RAM that fits under 6 inches
Skip if
- You require RGB lighting synchronization
- You need extreme cooling for high-end overclocking
- You have very tall RAM modules that exceed 5.98 inches
Verdict: Cooler Master Hyper 212 Black offers solid thermal performance for users who prioritize silence and a clean aesthetic over flashy lighting. It is a practical fit for standard LGA 1700 builds that do not require massive cooling headroom.
Specifications side by side
| Spec | LPLMOOM LGA 1700 Copper Core CPU Cooler | Cooler Master i70C ARGB Low-Profile Cooler | ZYZMOON LGA1700 65W CPU Cooler | Cooler Master Hyper 212 Halo CPU Cooler | Zalman 135mm Black CPU Cooler | Thermalright Peerless Assassin 120 Black Cooler | Cooler Master Hyper 212 Black V2 |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA1700 | LGA 1700, LGA 1851 | LGA1700 | not stated | LGA1700, LGA1200, LGA115X, AM4 | not stated | LGA1700, LGA1200, AM4, AM5 |
| Cooler Height | not stated | 70mm | not stated | 154mm | not stated | 157 mm | not stated |
| Heat Pipes | not stated | not stated | not stated | 4 | 4 | 6 | 4 |
| Tower Design | not stated | Low-Profile | not stated | not stated | not stated | Dual-Tower | not stated |
| Fan Size | not stated | 120mm | not stated | 120mm | 135mm | 120 mm | 120mm |
| TDP Rating | 65W | 95W | 65W | not stated | 180W | 245 W | not stated |
| Fan Speed | 3000 RPM | 1,800 RPM | 3000 RPM | 2050 RPM | 1500 RPM | 1500 RPM | 2500 RPM |
| Lighting | not stated | ARGB | not stated | ARGB | not stated | not stated | not stated |
| Color | Black | Black | Black | Black | Black | Black | Black |
| Material | Copper, Aluminum | Copper, Aluminum | Copper, Aluminum | Aluminum | Copper | Aluminum | Aluminum |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 4.3 × 3.14 × 2.99 inches | 4.72 × 4.72 × 2.76 inches | 3.9 × 3.9 × 1.8 inches | 6.06 × 4.88 × 2.87 inches | 5.31 × 3.74 × 6.1 inches | 4.92 × 5.28 × 6.24 inches | 4.92 × 2.91 × 5.98 inches |
| Weight | not stated | 14.5 ounces | 11.2 ounces | 1.53 pounds | 1.9 pounds | 2 pounds | 1.54 pounds |
| Model | M23901-001 CPU Cooler | RR-I7C7-18PA-R1 | Compatible with Intel Laminar RM2 cooler | RR-S4KK-20PA-R1 | CNPS10X PErforma | PA120 Black-D2 | RR-S4KK-25SN-R1 |
| Size | not stated | 3.40 | not stated | V2 | not stated | not stated | V2 |
If you need a liquid solution, see the minorsonic aio CPU cooler alternatives page for more options.
Frequently asked questions
Which CPU cooler is best for basic 65W LGA 1700 replacements?
The LPLMOOM LGA 1700 Copper Core CPU Cooler serves as the top choice for basic, reliable replacements for stock cooling on 65W Intel processors. It offers straightforward installation and adequate airflow for non-overclocked builds. Its copper core and aluminum fins provide a balanced thermal solution for standard desktop use.
What is the best low-profile option for compact cases?
The Cooler Master i70C ARGB Low-Profile Cooler is a practical option for compact builds using mid-range Intel CPUs. It fits users who prioritize case compatibility and lighting over raw cooling power. Its height of 2.76 inches ensures it clears most small form factor chassis while supporting LGA 1700 and LGA 1851 sockets.
Is there a budget-friendly alternative to the LPLMOOM cooler?
The ZYZMOON LGA1700 65W CPU Cooler is a functional replacement for stock Intel coolers. It suits owners of 65W Core Ultra processors who want simple, quiet cooling without extra features. With a height of just 1.8 inches, it is an excellent budget choice for low-profile builds requiring basic thermal performance.
Which single-tower cooler offers good airflow for compact cases?
The Cooler Master Hyper 212 Halo CPU Cooler fits users needing a short cooler for compact cases. It offers reliable airflow for standard processors but lacks the headroom of larger dual-fan designs. Its height of 2.87 inches and 120mm fan make it a solid mid-range option for LGA 1700 systems.
What cooler provides high airflow with good RAM clearance?
The Zalman 135mm Black CPU Cooler delivers solid cooling for 180W processors. It fits users who prioritize airflow and RAM clearance over visual flair. Its 135mm fan and copper construction ensure efficient heat dissipation, making it a strong performer for high-TDP Intel CPUs in standard mid-tower cases.
Which dual-tower cooler is best for high-TDP builds?
The Thermalright Peerless Assassin 120 Black Cooler delivers robust cooling for LGA 1700 and AM4 platforms. It fits users prioritizing thermal performance over aesthetics in standard mid-tower cases. With six heat pipes and a dual-tower design, it handles high thermal loads effectively for demanding workloads.
What is the best quiet option for standard LGA 1700 builds?
The Cooler Master Hyper 212 Black V2 offers solid thermal performance for users who prioritize silence and a clean aesthetic over flashy lighting. It is a practical fit for standard LGA 1700 builds that do not require massive cooling headroom. Its single-fan design ensures quiet operation while maintaining reliable temperatures.